Move from storage location- blocked to other strg. loc. - blocked

It's possible to move a material (with batch) from a storage location (stock blocked) to another storage location (stock blocked) using one movement? If yes, what's the movement? If not, what is the simples way to move it?
Thank you.
Edited by: Was Wasssu on Jul 8, 2010 10:11 AM

Hi.
Use 325 movement type in MB1B t-code.
SAM

Similar Messages

  • Detetion material from storage location

    Hi All ,
    I wanted to delete a material from a storage location .Can any one suggest me to delete material from storage location other than blocking material for storage location using MM06 .I suppose that it can not done by using MMSC.
    Thanks & Regards,
    Srikanth P.

    Dear,
    If you created an material by error and you want to delete that material from the data base you can do it in this simple 4 steps. The only condition is that this material has to have no material movement recorded.
    These are the steps:1
    1) Flag material for deletion. transaction MM06
    2) Run report MMREO001 - Selection of materials flagged for deletion and select the material
    3) Run report MMREO050 Archive Materials to archive the material (some customisig settings might be required)
    4) Run report MMREO110 Deletion Program for Archiving Materials to delete the material from the database.
    These reports are called by the SARA transaction too.
    Regards,
    Syed Hussain.

  • Transfer stock from Storage Location to Bin

    Dear All,
    what is the procedure to transfer stock from Storage Location to  Bin  ( T.Code and Mov.Type)
    waiting for your Reply
    with best regards
    Suman

    Dear Kiran
    Thnaks for your reply
    Im doing Process as below...
    T.Code:LT01
    click on Transfer Order ( Header)  select WITHOUT REFERENCE
    WHNO: CWH
    MOV.TYPE:999
    MATL:
    QTY:PLANT:
    S/L
    NEXT SCREEN
    DESTINATION
    ST.TYPE:
    STORAGE SEC:
    BIN NO:
    AFTER PRESS ENTER SYSTEM GIVE BELOW ERROR MESSAGE
    "CANNOT FIND SOURCE STORAGE BIN"
    AFTER THAT IF I ENTERED 
    FROM
    ST.TYPE:
    STORAGE SEC:
    BIN NO:
    THEN SYSTEM GIVES ERROR MESSAGE
    STORAGE TYPE XXX DOESNOT ALLOW NAGATIVE STOCK FIGURES
    EVEN IN STOCK OVER VIEW MATL. IS AVAILABLE
    PL. CORRECT IF IM WRONG 
    with best regards
    Suman

  • Transfer material from Storage location to Storage type.

    Hello,
    At the time of usage decision we are posting the stock in "To Reserve stock" for that we have created seperate storage location ie for Sample material.
    we having two samples one is customer sample and other is in house sample both the samples we are posting in same storage location.
    Client want to differentiate these two samples, so we have created two storage types.
    Now My question is " can we transfer the samples in different storage types from Storage location.
    This is the QM and WM integration.
    Please advice
    Thanks in advance.
    Regards
    Anil

    Hello Anil
    I don't think you can transfer from storage location to storage type.
    If your purpose is to differentiate these two samples, then why not use different Sample types with different number ranges and thus identify them. You don't have to get into QM-WM integration just for that.
    If you want you may also set up 2 different physical sample locations: That would be ideal.
    SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Types
    SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Number Range
    SPRO/IMG/Quality Management/Quality Inspection/Sample Management/Define Physical-Sample Locations
    On the application side you may use the sample management procedures to deal with samples. See the following link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/b8/b9b3341a933f50e10000009b38f83b/frameset.htm
    Does that work? Let me know.

  • Org unit changes but position not  when emp move from 1 org unit 2 other

    Hi,
    We have a scenario in which when an employee moved from org unit to another (temporarily) his position doesn't get changed but org. unit changes. How to manage it???
    Thanks in advance
    Anand

    Hi Naveen,
    Let me expain the process in details when you enter "Position" in IT 0000 & 0001  in Emp. Master (PA30) it inherites Org. Unit, Org Key and Cost Center. To get inheritance of org unit, org key, cost center along with position you have to assign all to org. unit in PPOM.
    I want "Position" to be remained unchanged when an employee moves from one org unit to other only organization unit need to be changes.
    Please suggest
    Thanks a lotttttttt

  • How do I move from one tab to the other?

    I know you can move from one tab to the other with the mouse, but how do you do it with the keyboard

    From the Safari Help menu after searchf for "keyboard':
    Bring the next tab to the front: Control-Tab or Command (⌘)-Shift-[
    Bring the previous tab to the front: Control-Shift-Tab or Command (⌘)-Shift-]

  • As far as I know, the iPad cannot presently playback a full length movie from a DVD or any other source.  Are there any plans to add such a capability to the iPad in the future?

    As far as I know, the iPad cannot presently playback a full length movie from a DVD or any other source.  Are there any plans to add such a capability to the iPad in the future?

    alvwill wrote:
    Phil0124:  Sorry, I guess that I may not have communicated clearly initially.  The reason that I asked about the DVD reading capability in the first place is that I would like to be able to watch a movie "stand-alone" (like on an airplane) on my iPad without having an internet connection.  If VUDU is strickly a streaming service that wouldn't satisfy my needs after all.  After looking into the iTunes store offerings, I can see that I can either purchase a movie or rent one from them.  Either way, as I understand it, the content would then reside in a file in the iTunes folder in my computer (if rented, this would just be temporarily) and could be viewed on my computer and/or transferred to my iPad for viewing.  Considering the legal question, isn't there a copy being made and transferred into my possession.  So,what's up with that?
    Yes Vudu streams. iTunes does not. If you buy or rent a movie on your computer through the iTunes store, then you are legally entitled to transfer that movie to your digital device as long as that device is under the Same Apple ID used to download it to the computer, and is authorized to view the content. Usually this is the case if your device is synced with iTunes on the computer  This is legal and covered by the terms of use of the iTunes store.   
    If your rent a movie on your computer you can also transfer it to your iPad but it will be removed from the computer as rentals can only exist in one place at a time. When the rental period expires the movie will be automatically removed from your computer or device, wherever it is when the rental period expires.
    If you buy a movie on your iPad these can be transferred to your computer using the Transfer Purchases button on iTunes on your computer while the iPad is connected to it.   Rentals on iPads or other mobile device cannot be transferred and must be watched in the iPad or device that download them.
    All of these methods through the iTunes store download the complete movie to the device or computer, so no internet connection is required for watching at a later date.
    Rentals have a 30 day life as long as they haven't begun to be watched.  Once the movie has been started then it has a 48 hour expiry period. That is you must finish watching the rented movei within 48 hours of rental as after that it is removed from the device.  You can watch it as many times as you want in that period of time though.
    iTunes Store: Movie rental frequently asked questions (FAQ)
    http://support.apple.com/kb/ht1657
    How to rent a movie from the iTunes Store on your computer
    http://support.apple.com/kb/HT1390
    Purchased movies are yours, and never expire. If you delete the movie from your device or computer it can be re-downloaded at no extra cost provided the Movie is still available in the store.

  • Block deliveries from storage location

    Hi,
    I have two storage locations - 01 and 0Q.
    The production wanted 01 to be their storage location for finished products for sale. All deliveries must be issued from this storage location.
    Storage locatio 0Q is the Quarantine location for finished products that is not yet ready for sale, or with quality problems. Deliveries for sales should not be done from this storage location.
    My question is how to restrict, or disallow any goods issue for sales orders or deliveries from the Quarantine location? Is there a transaction in SPRO where I can do this configuration?
    Thank you in advance

    Hi,
    Option No. 1 --> Using User Exit
    Option No. 2 --> Using SPRO
    You can use incompleteness for inbound delivery, in incompleteness Put storage location as a filed. You can define the same using SPRO.
    Logistics Execution ---> Shipping -->Basic Shipping Functions > Incompletion Control for Deliveries>Define Incompleteness Procedures Select H delivery item and create your procedure.
    Assign table filed as LIPS -LGORT screen LAPD status 02 and Seq 1000 and attach this in Procedure to ELN in below path
    Assign Incompleteness Procedures -->Assign Incompletion Forms to the Delivery Item Types
    Now, if you are try to save the inbound delivery with Storage location system will not allow you to save the delivery.
    Bye,
    Muralidhara

  • STO- delivery document not commiting materials from storage location.

    While creating an STO PO and delivery to move a material from a storage location in Plant 0003 (plant 0003 consists of 30 storage locations and 3 Shipping Points (1 for each of the Depots)), we are facing 0 stock issue.
    We can change the Shipping Point in the STO PO to the Depot the material is coming from but no place to identify the Storage Location from which we are pulling.
    The STO PO commits the material and provides a commit date.
    We are using VL10B to create the Delivery > the Delivery fails and the log says "440000 0010 Only 0 EA of material 772-8760-876 available".  There is material in 3 different Storage Locations in that Plant.
    Does a delivery document consider shipping point only and not the storage location (sloc) inventory?
    Do we need sloc-shipping point tie-up one to one?
    We have inventory in both Storage Locations for MRP and for NO MRP.
    Any advice, not sure if we are missing anything in config!
    Thnx!
    Points will be rewarded.

    Check the following in OPJJ
    The checking rule(for delivery it is B in std SAP) and avaiability check(from material master) combination
    in the storage loc check sub screen
    NO storage loc inspection  check box is activated or not?
    If it is not activated then system will check as per storage loc specified in delicvery, if activated, then system will check and give commitent at plant level
    One more check is
    In table TVKOL, is the storage loc is determined through shipping point/plant/stog condition combination?
    IS so this storage loc is taken for checking

  • Restriction on movement type,storage location on USER ID

    Dear Guru's,
    I have to restrict movement type 311 on some storage location for some user ID.Following is already done but not able to restrict the movement of material on other storage location rather than defined:
    1) Maintained authorization objet M_MSEG_LGO with two storage location ST01,ST02 and movement type 311.
    2) Using BADI MB_MIGO_BADI and maintained Z table with USERID,Mvt type 311,storage location ST01,ST02.
    Still we are able to do Mvt 311 on other that defined locations in authorization objet M_MSEG_LGO and Z table....
    Kindly give ur valuable suggestion to resolve the issue......
    With Regards.

    HI
    For your requirement only I have suggested to create multiple role. In one Role you specify SLOC & MOvt type(only 311) in auth object M_MSEG_LGO & M_MSEG_BWE for slocs where you want 311 movt. In other Roles of goods movt you also specify other SLOCs & all other movt except 311. I mean in the other Role you cant keep the movt type as * in auth object M_MSEG_BWE.
    So its a combination of SLOC & MVT tye. Try & give feedback
    Shakti
    Edited by: SHAKTI BEHERA on Jan 14, 2012 12:15 PM

  • SAP Server Movement from one Location to another Location

    Dear all,
    We plan to move SAP servers from excisting  location to new location .
    Is there any precaution to do before shifting SAP Servers .
    Regards

    Hi,
    How are you doing the migration, are you still connecting to the disk sub system ?
    If you have a DR plan off site? good idea to go over that plan, that will help
    Just a few things to think about, though some may not matter as I do not know you complete plan.
    startup Profile changes
    Background jobs that have hardcoded with previous hostname
    Operation modes
    external interfaces
    Logical paths transaction (file)
    Mark

  • Stock removal from storage location

    Dear All,
    System showing some stock at various storage location, but whic is physically not in location. Every month balance sheet this stock is shwoing.
    Please explain me any how to delete this stock from those storage locations.
    Thanks in advance.
    Thanks & Regards,
    Krish

    Hi sap gurus,
    there was an production order xxxxx for a machine. so all the materials was booked for that order. then , suddenly the requirements changed. so, they stopped the order n used the whole material for another similar order. any extra material needed 4 the new production order was added to the new one and closed the new order. But, they hav not sent back the materials for the old production order. It has resulted in over valuation of the stock-WIP. i/e., there is a machine worth 15 lakhs on the system virtually. wheras in reality, physically, the machine doen't exist.
    Now, the issue is if u want to reverse the work in progress on 31.03.08, will the system let us do (i.e. can we reverse a WIP on a previous date??). if so, pls suggest the complete procedure including Tcode's to use.
    Thanks
    Pavan

  • Transfer posting value limit from storage location to location

    Dear Experts,
    1. Is there any option to restrict the stock value that can be transfer-posted between storage locations ?
    2. Any option to limit the maximum stock value a storage location can hold ?
    Thanks

    Dear All,
    Thank you for valued feedback.
    1. I was aware of the fact that stock is valued at plant level and it was not possible in standard. I was looking if anyone has done any innovative solution for this requirement.
    2. Jürgen L - Thanks for the user exit, I was checking this yesterday and thought of check the Quantity in SLoc * Material Price to check the value before posting.
    3.Joshua Albert - I had already configured EWS but business is not happy as there is no restriction only an exception email.
    The issue is we are have a sales channel, where we created each Saleman as Storage Location and Transfer the stock to Salesman Storage Location and they do door to door selling to retail outlets and then after 2 days they come back with actual sales invoices which are recognized as sales which is consumed from their Sloc and again stock in transferred to their location, but there is no control on this.
    I looked at changing the solution to customer consignment with credit management but credit management doesn't work for consignment fill up.
    4. Sangeeta Khurana - Could you please give me more info on wht you hve suggested, was not very clear.
    Thanks!

  • Tax jurisdiction from storage location address

    Hi all,
    During PO creation (ME21N), the tax jurisdiction (Invoice tab) defaults to the one set up in the plant address. Is there a way to have it default to the tax jurisdiction from the storage location address?
    Thanks.

    Charlie.,
    I am looking to add the following particulars in the PO Delivery address from the Storage location address/s
       NAME:              Title and First column already exist.
                               (To be included ) Second Column.
    Street Address : Street/House number, Postal code, City and region already present.
                             ( To be included) Jurisdiction Code and County
    Communication :  To be included ( Telephone number ) -- Ext Number
    Thanks

  • Create Forecast from one location porduct to other location product

    Hi All,
    I have a business scenario trying to design process in APO -DP.Two Plants in R/3 (1001 and 1002).
    Plant-1001, produce  material A using raw material B.
    Plant -1002,  Produce C  and sale to plant 1001. Physically material B and C are same but in R/3  material  B and C  are different numbers.
    I am trying to design this scenario in APO- DP  like whenever Plant 1001 run forecast for material A, it should generate forecast for material B(raw mat in 1001) and material C (finish product in 1002).
    I tired to understand if APO-DP BOM functionality can be used but in this case system asked me maintain material C in plant 1001, which i am trying to avoid.
    This seems to be common business scenarion. I'll appreciate any quick advice or help to understand how to map it in APO-DP.
    OR
    Is there anyway to transfer forecast from one location product to another different loaction product.
    Thanks
    Kumar

    Hi Kumar,
    1) Your scenario seems like realignment of location products.
    2) You can achieve this using realignment planning in APO DP
    3) The transaction to do this is /SAPAPO/RLGCOPY
    4) Here, the history of one location product will get copied or maintained to transfer
    to another location product
    5) You can select one or more key figure data to get copied to your new
    location products from the existing history.
    Regards
    R. Senthil Mareeswaran.

Maybe you are looking for