Move in error

hi friends
i got an error in movein process while i click billing push button ..it says the contract not billable
and the reason is
No rate was found for the period 15.09.2008 to 15.09.2008
i maintained 01.01.2008 as the date through out the billing master data and in the rate detrmination too.
the installation is made on 15.09.2008 and the move in date is also 15.09.2008
my scheduled billing date is 01.10.2008
thanks and regards
prince

hi naren
(No rate was found for the period 15.09.2008 to 15.09.2008
One thing is sure from the above error is u have given the date from 16.09.2008.
chck all the dates that u have mentioned and check also the date price key.)
i have maintained the move in date as 15.09.2008 and the system picks the actual movein as 15.9.2k8 ..
and i have maintained all dates as 1.1.2008 to 31.12.9999
so in billing master data its not a proble its saying no rate exosts for that period ..
even the installation i have maintained on 15.09.08
device and materail creation are b4 15th..i hope it wont be a problem and it should notbecause the installation has to be ready when a movein happens...
so it hitting the portion??in portion i have given as scehduled mr date as 30.09.2008
and shecdueld bill date as 01.10.2008
can u guess??
thanks and regards
prince

Similar Messages

Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18

Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
Process:         Adobe Premiere Pro CC 2014
Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier: com.adobe.AdobePremierePro
Version:         8.1.0 (8.1.0)
Code Type: X86-64 (Native)
Parent Process: launchd [2538]
Responsible:     Adobe Premiere Pro CC 2014
Date/Time: 2015-01-06 14:04:23.500 -0700
OS Version:      Mac OS X 10.9.2 (13C64)
Report Version: 11
Crashed Thread: 55 Dispatch queue: com.apple.root.default-priority
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
Customer created test export with 777 permissions and set mount parameters to the following:
mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
-- Original mount options:
     General mount flags: 0x40 async
     NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
-- Current mount parameters:
     General mount flags: 0x4000058 async,nodev,nosuid multilabel
     NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
478         V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
479         V3 CREATE Reply (Call In 478)
484         V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
485        V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT -   This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster. Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

Unable to play some movie from Netflix on my iPad. When I click on a movie an error message comes up which says "cannot play movie. Please try again". Can anyone assist me? I just upgraded to iOS 7.1. Netflix not able to find problem.

Unable to play some movies from Netflix on my iPad. When I click on a movie an error message comes up "Cannot play movie. Please try again later." I contacted Netflix but have not been able the help so I am wondering if it's my iPad. I didn't have a problem before but I have recently upgraded to iOS 7.1. Also is a certain amount of storage needed to play a movie? About how much is that?

Hello all,
I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

"Error Compiling Movie: Unknown Error" or program crash when rendering

I just built a new PC because my Macbook Pro couldn't render fast enough. Now that I have built this brand new computer, I can't render at all! I render once and get the "Error Compiling Movie: Unknown Error" and if I try to render again, the program crashes.
My files are not corrupt as I can render them without problems on my laptop (just slowly) and on a friend's PC. I can export fine but the project I am working in is currently very small. I have 450gb of space and when using After Effects, rendering is a breeze. I have restarted, uninstalled and reinstalled and nothing seems to be doing the trick.
I feel like this must be a bug in Premiere Pro CC. Has anyone had this problem and/or come up with any solutions?

You may have more luck getting help with this kind of problem on the AME forum. Or at least have a look at this page from the AME forum prompting you for the information that can help in isolating the cause of this problem: http://forums.adobe.com/thread/1011883.

I'm getting an error compiling movie Unknown error. It's always been fine before.

Hi I'm getting an error compiling move Unknown error. Its always worked fine on my mac before.
I've tried trashing my render files and switching to mercurey playback software only but it won't let me render or export.
It might be to do with Magic bullet looks plug in but I've used it and hope I don't need to remove it as I love it.
Please help!

There's no one solution for Unknown Errors. You'll have to experiment with different things, hoping to stumble upon something that works.

One cause for "Error Compiling Movie: Unknown Error"

I just finished a huge promotional video project, one which was fraught with problems.
To start out with, most of my interview footage was RED Epic material, and my b-roll was comprised of a combination of RED Epic (some at 4kHD and some at 5k), RED ONE (some at 4k, some at 3k), XDCAM-EX 1080p, HDV 1080i, Sony AVCHD 1080p, previously exported Vimeo HD h.264 material, and still shots. Needless to say, quite a mess of codecs and odd file types to combine into one project.
Since much of my b-roll was 1080p, I decided to do my entire edit on a 1080p timeline; however, since all my interview footage was RED, I decided to use a RED Epic 1080p timeline. In doing so, I discovered something important about Premiere, and I don't know if this is a bug, or if it's meant to work this way: when you put 5k RED Epic material on a 1080p timeline and use the zoom controls in the motion effects panel to bring it to size, and attempt to export, you'll get the "Error Compiling Movie: Unknown Error" every time. This may happen with other types of footage that's too big for the timeline too, i'm not sure. However, when you instead right click on the clip and use the "scale to frame size" command, it exports just fine, with no errors.
I also discovered that (at least with my setup), PrPro can't handle large stills on the timeline; I contiually got OpenGL crash errors until I resized all my images in Photoshop to be no more than 1920px wide.
The promo video is 11:30, and comprised of five segments. I edited each segment (interview and b-roll) in it's own sequence, and then nested the sequences along with the transition/motion graphics/title slides between them on my master sequence. However, I kept getting crashes and freezes when attempting to export that master sequence which I couldn't explain. Ultimately I had to export each of the individual sequences as a Lagarith UT AVI file, and then import that file back in and place it in the master sequence where the nested sequence had been. Once that was done it exported fine, so I'm still not sure what the problems were, since each individaul sequence exported okay, and the master exported just fine after replacing the nested sequences with the Lagarith clips...
Anyway, I think I've got a pretty good promo done, and it's definitely a TON better than our last one. When I get it online I'll post a link over in the Lounge and ask for feedback...

So, I ran into this the first time recently. I discovered it when I copied an adjustment layer for quick grading with an RGB Color Corrector and Color Balance effects in it from a rehearsal cut of a short film.The effects worked fine and rendered out without issue. I imported the sequence into my 'final' cut so I could reuse the titles and adjustment layer. I copied the adjustment layer to the new rough cut of the final sequence and ran into this error when I tried to render it, but only after applying the adjustment layer. I found that if I turned off the Color Balance, the sequence rendered fine. I found that if I moved the Color Balance above the RGB Color Corrector, the effect of the RGB effect completely disappeared AND it rendered correctly (both effects turned on) - so reversing the order worked, but effects were weird. I also found that if I added ANY non-GPU accelerated effects to the RGB Color Corrector that I'd get the same compile error (unknown).
I went through and deleted clips until I got to 0 on the timeline, added a new one back on, and it still wouldn't render. So, I created an entirely NEW sequence, copied all video and audio (not adjustment layer) from the original failing rough cut of the final sequence, and pasted it into this new sequence. I also copied the adjustment layer again from the rehearsal cut into this new sequence and it is rendering just fine.
HOURS WASTED DOING THIS! It would be awesome if Adobe actually tested their products before releasing them instead of forcing us to do it for them. My project consisted of about 30-40 different clips and audio, all from the same DSLR (Nikon D810), nothing fancy, two effects in an adjustment layer applied to the entire sequence, and Premiere couldn't handle it. Given this and some of the comments I read while troubleshooting this on this forum, gives me pause in trusting Adobe products for any real work that has a deadline (unless, of course, you build in the required Adobe testing time into your budget).
So, just another data point; something else to try. Create a new sequence, and copy everything from your non-working one to it, and see if this will jump-start Premier. Worked for me. Good luck.

CS 5.5 Export - Error Compiling Movie - Unknown Error

I am running CS 5.5 and every time I export in Premiere or in Media Encoder - I get this message:
Error Compiling Movie - Unknown Error
I have tracked it down to a video clip with alpha channel. I have some animated overlays - If I turn off this layer it exports fine, but unfortunately I need the animated video with alpha in the exported file.
The video is using the Lagarith Codec. I have updated the codec and still getting the error. I have also tried using other codecs that support an alpha channel, like the Matrox IFrame with Alpha codec and the same problem exists.
These are TV shows and I need to get this resolved if anyone has any suggestions. I've done hundreds of these same formatted shows in the past, so it is not my system, drives, cpu, etc. This did not happen on previous versions of Premiere Pro.

Hm-m,
Obviously, you are using the Alpha Channel for some Transparency. Are there any other Effects applied to that problem Clip?
If you could post a screen-cap, showing that Clip Selected (and probably the Effects Control Panel also), plus the underlying Clips on the Timeline, perhaps someone can see an issue there.
You do have the 64-bit version of Lagarith installed, don't you?
Good luck,
Hunt

Error Compiling Movie: Unknown Error - Simple Solution in Premiere

ADOBE PREMIERE EDITORS: Be forewarned about the infamous "Error Compiling Movie: Unknown Error." It usually doesn't happen unless you're editing a big project like I am and then it screws with you because you've been editing fine until it's time to export and you can't even make your project into a movie, which defeats the purpose of all your hard work. I looked up forum after forum and finally there were a-few solutions that worked for some and not for others. (Adobe said they will get their team on this case right away.) Let's just say I do not have Final Cut Pro, so I cannot export to XML and then import into FCP to do the exporting like some people found helpful. Nor do I have the time to import my Premiere project into After Effects only to manually create all of my "dip to white" transitions. But I would have had to do that if nothing else I tried worked and thankfully, I was able to trick Premiere. It's so simple, it's stupid. Just open a new project in Premiere. Then "import" the project you wanted to export. For some odd reason, without changing anything of substance or in other words, doing practically nothing about the issue, it exports now. Just because I opened a "new" project and "imported" my old project. Of course, this may not work for others, but please try it and then reply your results. Me and I'm sure Adobe would find it very helpful to see if that worked for most people. It worked for me.
[Profanity is not permitted. Removed. Please keep your language family-friendly.]

I agree, Jim, but my train of thought was that a lot of people were changing and replacing and taking out effects and clips from their sequence to see if it was the components in the sequence that was causing the "unknown error." However, I had the same "unknown error" and was able to export in Premiere anyway by just practically "telling" Premiere that it's a new project, when I'm importing an old project to do the same task. Which makes me think that maybe Premiere doesn't have a problem exporting the specific files that most people thought were the problem, maybe it was just a glitch somewhere in Premiere that made the software think there was a problem after a certain amount of time, when there really wasn't. I don't know, I'm not a coder so that's just my layman guess. I did notice that Premiere was exporting/rendering fine when I was just beginning my project, but after it got to a certain length, that's when I couldn't render or export anymore. It honestly baffles me too. It would be useful to see what the results are if other people tried this simple switch-a-roo so possible issues can be narrowed down.

Error compiling movie: unknown error & Mercury Playback GPU acceleration

Hardware
2014 Mac Pro, 12GB RAM, 3.7 GHz Quad-Core Intel Xenon ES Processor, duel AMD FirePro D300 2048 MB graphics cards
Software
Mavericks (10.9.4)
Premiere Pro CC2014 (8.0.1)
I'm attempting to render out a moderately complex sequence. Raw footage was dslr h.264 MOV files. 30fps 1920x1080 from canon. It has some clips that are pulled from multi-cam sequences and a few that have warp stabilizer applied. 4 total audio tracks with some linked comps from audition. Whole thing is about 14 minutes. It should be noted that I render out similar sequences regularly without issue. However on this occasion whenever I tried to render out using media encoder ( for web h.264 MOV 720 30fps) I was getting an error at the same clip every time. Error Compiling Movie: Unknown Error. So I checked out the clip. It was one of the ones with warp stabilize. I turned that off and sent it out again. Render got further this time but hit a different clip with warp stabilize (after getting through like 2 other clips with warp stabilize enabled) and gave me the same error. I tried getting rid of cache files, saving to a local drive instead of a network drive, uninstalling and re-installing premiere even. (which btw if you check remove preferences then reinstall it def still has preferences so that's a total load.) Anyway I was doing some forum surfing and found several people going all the way back to PP 5.5 saying that the only solution they found was to turn off the Mercury Playback GPU acceleration. Tried that and it's currently rendering just fine but taking roughly 4X longer than with acceleration. The GPU acceleration is a big deal for me since our company relies on putting out a lot of volume quickly. Has anyone else experienced this problem and is it something you were able to fix without turning off GPU acceleration. Grateful for your input.

sorry I actually wrote that wrong. I am using the H.264 setting 720 30fps to create a web friendly .mp4. Alternately though I decided to watch and see if it was the same clip failing every time. It is. I went into the project and did a match frame for the offending clip. Dragged the a new version of the same content onto the timeline and copied the warp stabilize effect onto the new version. Well this time the encode got past the clip with the issue, however the next clip it hit with warp stabilize caused another error compiling movie: unknown error. I guess at this point my options are to turn off the GPU acceleration and wait for a render that takes more than 3x as long to render with software only, or to go through the whole timeline and replace the clips with warp stabilize (there are a bunch, the shooter wasn't having a great day on glidecam). Not a great solution on either end. Please let me know if I should file this as a bug report. Though it seems people have been having the same issues since version CS5.5

HT203200 Movie Rental error - i keep getting the message "We could not complete your Itunes store request. an unknown error occured (-42110). There was an error in the Itunes store. Please try again later.... any help?

Movie Rental error - i keep getting the message "We could not complete your Itunes store request. an unknown error occured (-42110). There was an error in the Itunes store. Please try again later.... any help?

Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Data Mover login error (SQL 2008R2 as backend DB)

Hi,
This question was asked in this thread -> Continued Discussion - Steps to Upgrade PT8.49 to 8.50 Manually
The difference between problem in that thread and mine is that I have WIN08R2 SQL08R2 Peopletools9.52 and Peoplesoft HRMS 9.0 installed. I was on the steps of creating the databases manually with the sql scripts and that was also preformed.
I also have different ConnectID: people and AccessID: peoplesa with respective passwords. I try login in with the AccessID and I get the below error.
File: SQL Access ManagerSQL error. Stmt #: 2 Error Position: 0 Return: 8077 - Invalid SNAC client version (minimum is 10.00.1763) (SQLSTATE PS077)
Any suggestions?
-Vishal

Hi there,
I upgraded the SNAC client to 1033\x64\sqlncli.msi from the Microsoft and still I get the same Login error in the DataMover.
I checked the registry location --> HKEY_Local_Machine\Software\Microsoft\Microsoft SQL Server Native Client 10.0\Current Version = 10.51.2500.0
The Data Mover login error says that it requires minimum is 10.00.1763 so i guess the one I have should work fine?
Any suggestions?
-Vishal

Can't add movie file / bad movie atom error

Hello,
I'm having a very strange problem. I just started within the last few days trying to organize an Itunes movie database so that I could see all of my movies streamed over my Apple TV. Most of the movie files I have been able to add with no issue, aside from the fact that they always initially get added to the "Home Movies" folder and then I have to move them into the other movie category. So then I come to one of my files which is a rip of one of my BluRay movies. It is in MP4 format, so that should be no issue. I was initially able to add the movie, and it did appear in the Itunes Home Movies section. But I didn't like the way the file was named, and I wanted to add the poster art. I right clicked and went to change what I wanted, the first being the name of the movie. Well prior to me changing the name of the movie, I had the tab option where you could add the movie art. As soon as I changed the file name, that tab went away. Well, I figured maybe I should delete the movie out of the Itunes database and try to re-add it.
Well from this point it's been downhill. Every time I try to add the file back in, it won't appear in Itunes. I then tried playing the file in VLC player, and the file appears to open, and the ticker is moving along, but there is no video or sound. Now this file played just fine before I tried to move it to Itunes. I then tried playing it via Quicktime and I get some weird -2002 bad movie atom error. What the heck is going on! I have searched the net on this error, and the fixes seem to be all over the place, and none of them have worked for me. One thread talked about the tags somehow being changed, but I cannot figure out what tags people are talking about or how to fix this. If anyone has a solution to this I would greatly appreciate that. thanks.

It is against the rules of the forum to discuss extracting from film blu rays. Blu rays used for data storage fine.
I am sure there are plenty of sites out there that can advise on the correct steps to take here.

I can't finalizing my movie project: error 49, what is this?

i can't finalizing my movie project: error 49, what is this?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

HT1390 trying to rent a movie and error message pops up saying "item cannot be downloaded on this network. You must connect to wi-fi or download it on your computer". I just finished downloading a rental but I get this message when attempting another. Any

trying to rent a movie and error message pops up saying "item cannot be downloaded on this network. You must connect to wi-fi or download it on your computer". I just finished downloading a rental but I get this message when attempting another. Any help much appreciated

You might want to try it again. It started working for me about 10 minutes ago (~8pm CST).
This was happening for rentals and purchases.

I try to see a movie, an error is displayed: An error ocurred loading this content. Try again later, and i can´t see the movie and I payed for it. What can i do, I tried at least 10 times, and the problem continues

I try to see a movie, an error is displayed: An error ocurred loading this content. Try again later, and i can´t see the movie and I payed for it. What can i do, I tried at least 10 times, and the problem continues

Welcome to the Apple Community.
Try pulling all the cables for a few moments and trying again.

Photoshop 7.0 Install Move Data Error

I have reinstalled my operating system twice, after complete format, and both times when I have tried to install Photoshop 7.0 I get an error message; "Component Move Data Error Info, Media name: Data, Component: App-Photoshop, File Group: App-PS, File: photoshop.exe, Error Number: -106 (refer to online help)" which prevents me from reinstalling Photoshop 7.0!
I tried installing on another computer in my house, and the installation was flawless. I am having no problems reinstalling my other programs. On the 2nd of the above re-installs, I did it in the safe mode after deleting all the *.tmp files (and others) as recommended in a forum with Photoshop 7.1 update.
I have requested technical support from Adobe using their online system. I'm supposed to receive a response within 24 hours. I've used this system once before for Adobe Premiere Pro, and got good results, so hope I will again.
Any suggestions would be greatly appreciated.
Bill

When my copy would install on other computers, I figured it had to be the CD, or the way that CD interacted with my computer, despite the fact that I have two Pioneer burners (DVR-110D and DVR-111D) which operate perfectly. So I made a copy of it on another computer, and the new CD installed OK on mine. It really remains a mystery why that worked with me as it defies logic, but you might try installing your CD on another computer and see if you have the same problem, and if so, try my solution. Good luck.

Move in error

Similar Messages

Maybe you are looking for