Move left channel to right

I did my music recording, and all of the signals are on the right side.
is there any way to move some of them to the left?
I realize that this will be a mono rocording either way.
regards,
lucky

http://thehangtime.com/gb/gbfaq2.html#leftspeakeronly

Similar Messages

Separating left channel and right channel

My composer needs a QT file that requires the following:
1. h.264 compression (for upload)
Audio: Left channel temp music / Right channel DIA/Vo/SFX
HOW DO I SEPARATE THE CHANNELS?

duplicate your sequence (you can always get back if you mess up)
in the dupe sequence, if your channels are now stereo, highlight the track,press option L (lower case) to make them mono. in your sequence settings define the audio outputs to be 2 mono. control click in the track near the on/off button and assign channels to either 1 or 2.

Copy left channel to right.

Hello.
I have an audio track originating from Première Pro which has only one channel of sound.
How can I copy the left sound channel to the right one to have both channels the same?
Thanks in advance

I think this is pretty much the answer. The key in soundbooth was to copy 'channels' into a new multichannel file, not 'copy waveform'
http://forums.adobe.com/message/2942057#2942057
Thanks

Move left page to right page possition

In the middle of the my inDesign doc, I have some how ended up with 2 left side pages. I need to move the second up to the right hand side of the first. How do I do this?
Thanks,
Ryan

Try to select all the pages on page panel, then mouse right click check on: Allow Document Pages to Shuffle and Allow Spread Pages to Shuffle.

Macbook headphone jack one outputs left channel !!!!!!

My headphone on my macbook pro only outputs on the left channel no right !! PLLEASSE !! HELPPP !!!!!!!

hey i got this problem for quite a long time, i was at the apple genius bar but they couldn't really help.
So i went on my own and came across this little thing:
The Balance in the Audio/Midi Setup were out of sync! Dont know why but when i pulled both to the max my headphones worked fine after all!
Hope it helps you like it did to me!

Output only in left channel

So I recorded a song and various instruments... everything was going great but I don't know what happened, suddenly sound was only coming from left channel and right channel only gets like reverbs and stuff. At the bottom only one of the bars is showing sound bouncing. How do I pan it back to normal?

It could be that we're both missing something obvious that someone else would see.
However, trashing Preferences (and to a lesser extent Caches) is a way to get rid of GB "ghosts" that mysteriously show up for no reason and mess things up. It often fixes mysterious problems that can't be fixed any other way (short of a complete uninstall and reinstall). When you get rid of preferences, it makes GB appear fresh to the computer. Caches are just temporary files - you can trash all of them and they simply grow back like weeds when you run the program.
If you're concerned about the risk, you could put them into folders, put the folders into the trash, and restart your computer, but don't empty the trash so the prefs and caches stay there "just in case." Open up GB (it will look like it's being opened for the first time), and new preference files and caches will be generated automatically. However, you could always retrieve your old preferences and caches in the trash, and swap them out for the new ones (although it's really better just to trash the old ones).
This won't effect your other projects and may not even help this one. However, it may fix the problem as this sometimes does fix ghost-in-the-machine problems, and is along the lines of housekeeping. It's refreshing some files that occassionally get corrupted, forcing the program to generate pristine new ones.

HT204291 I have my apple TV plugged into my Denon receiver. My receiver is setup with 3 speaker channels, one center, one left front and one right front. When I listen to music via Airplay, sound comes only from the center channel and right, nothing on

I have my apple TV plugged into my Denon receiver. My receiver is setup with 3 speaker channels, one center, one left front and one right front. When I listen to music via Airplay, sound comes only from the center channel and right, nothing on the left. When I watch Cable Television (not using the Apple TV), all 3 channels work fine so I know that the speaker connections are fine.

I had problems with streaming until I changed the WiFi channel that I was using. The original one conflicted with my neighbor. After that, MOST of my streaming problems vanished. Occasionally, a movie would pause for more buffering and I eventually ran an ethernet cable from the Apple TV to my Apple Extreme (to eliminate the Wifi). I have not had a single problem since then (except to repair the drywall after running the ethernet from one floor to another). :-)

How do i create a gallery page that you can click on an image, expand it and move left or right to see more images?

How do i create a gallery page that you can click on an image, expand it and move left or right to see more images?

You may use slideshow widgets to achieve this. For more details : Adobe Muse Help | Working with Slideshow widgets

How Do i add an inverted left channel to the right channel?

How Do i add an inverted left channel to the right channel?

http://www.thehangtime.com/gb/gbfaq2.html#audioeditors

Move a table to right or left when in the drop down tab menu

How do you move a table to right or left when you have many tabs and the tabl you want to move is in the drop down tab menu at the right....?

This forum is a joke.

I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is t

I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.

See the following thread on the same topic:
2 Thunderbolt displays MBP = sound coming from both displays?

Problem with the right and left Channel

Hey Guys,
i bought a few days ago the X-Fi Titanium PCIe Card. Now my problem:?
After i installed the drivers i noticed that i can hear the sounds of the left speaker also in the right speaker of my Headphone (Sennheiser PC60). I made a channel test and here the same. The guy sais "Left Channel" and i hear it on both speakers. The same with the right channel.
I made a clean restart and uninstalled all Drivers and Applications and reinstalled them: -> Same problem
I made a clean Windows installation (Vista x64): -> Same problem
i tried the Daniel_K-Driver: -> Same problem
Have someone an idea to solve that problem?
greets
kybo

When Soundbooth was first developed, it had a few extra things than what were not available in Audition. However, Audition remained the more high end sound editing tool. Soundbooth was locked to a multiple channel editing approach. In Audition, single editing is easy - you simply click the L or R at the right end of the sound channel to lock it and then you can edit the other channel only.
Soundbooth has been discontinued and Audition now has taken its place from CS6 to the Creative Cloud.
The above is some background info. To your current situation, you can use a workaround like:
* Export your audio file to separate channels by File > Export > Channels to mono files.
You will get 2 files with _L and _R suffix.
You can then edit them separately. You can go from Mono to Stereo by the following step.
Or
* Choose - Edit > Insert > Channels into New Multitrack file.
That will separate the Left and Right Channels and add them to a new multitrack file.
You can then click the Edit link at the top right of the channel to edit it.
You can then save that file as a new audio file.
Dean

Premiere Elements 13 (not Pro), recorded a video with mono mic input (left channel only), need to create 2-channel (left and right) audio track for finished product. Help?

The question says it all. I have been all over the tutorials as well as the menus inside Premiere 13 and cannot find how to edit the audio track beyond basic balance, volume, etc.
I can see the Audio 1 track, shows audio in left channel only, but it will not respond to attempts to select, cut/copy, paste, etc.
Basically I just want to turn one-channel audio into two-channel audio.

25424...
Sure you do not want to give the Fill Left and Fill Right another try?
According to the Adobe document Adobe Premiere Elements Help | Effects reference
Fill Left, Fill Right
The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information. The Fill Right effect duplicates the right channel information and places it in the left channel, discarding the existing left channel information. For example, you might use this effect on footage shot with a monaural microphone plugged into only one channel of a camcorder, extending the voice of a speaker from one channel to both.
From what you wrote, your Premiere Pro video seems to be saying the same.
If that Premiere Elements Fill Left or Fill Right is no go, you might want to explore what you can do in this regard using the free audio editor Audacity.
Audacity: Free Audio Editor and Recorder
And, then import the Audacity edited audio back into Premiere Elements project as source media.
Is the speaker system OK?
We will be watching for your results.
Thanks for the follow up.
ATR

Audio Input on the Left Channel is fine, Right Channel, Not So Much...

Okay, so I'm attempting to record some audio into my eMac using it's 3.5mm Line Input Jack, but Sound Studio is telling me that all of the audio is coming out of the left channel.
I checked balance, it's a new cable that works fine otherwise, the device I'm recording from sounds fine on headphones.
Any suggestions?
Message was edited by: Milton Allemand

Hmm. I think someone more technically-inclined with audio could help you out here. I tried recording audio on my eMac with QuickTime Player (I'm not sure if you need QuickTime Pro to do this, otherwise I would suggest you try the same thing). I have a similar experience as you. The QuickTime A/V window (control-K) informs me that the audio balance is shifted completely to the right channel (rather than left, as you observe in Sound Studio). And there is no way to adjust this, it is also "greyed out". This QuickTime recording is through the built-in microphone on my eMac. Might there exist (pricier) external microphones that are specifically capable of stereo recording? Or perhaps our eMacs aren't capable of stereo recording, at least without hardware modifications. I don't know. Clearly, I'm ignorant about this. Perhaps there is a Discussion going on somewhere else around here that is more Audio-specific?

Routing left channel to left and right

I have a split-track audio file I have brought into Logic Pro 8, with instrumental accompaniment in the left channel, and voices in the right. I would like to have the left channel appear in both the left and right channels in the final mixdown. Is there a simple way to accomplish this in Logic?
Thanks!
Brian

If you click and hold onto the interleaved symbol at the bottom of the channelstrip a small menue opens giving you the option to set the stereo channel to "mono" - "left" - "right" and "surround". So set it to "left" for the channel carrying the playback and then just use the pan pot to pan the channel where you want it to be in your final mix (center by default).

Move left channel to right

Similar Messages

Maybe you are looking for