Move & Lock DW CS3 Panels from the right of screen (default) to the LEFT

how do i change the default layout of the DW CS3 panels from
the right to the left like DW8 so that when i open the program they
will be on the left by default. everytime i move them over to the
left and close the program they alwasy appear on the right when i
run DW again. frustrating! thx. J

Save that arrangement as a custom workspace.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"coil" <[email protected]> wrote in message
news:go811r$hjk$[email protected]..
> how do i change the default layout of the DW panels from
the right to the
> left
> like DW8 so that when i open the program they will be on
the left by
> default.
> everytime i move them over to the left and close the
program they alwasy
> appear
> on the right when i run DW again. frustrating! thx. J
>

Similar Messages

  • Presentation starts 5" from the left side of screen and pushes intellegence off the screen to the right.

    The top of my screen is normal: the tool bar starts "File, Edit...
    The body of the screen while running Firefox-and during typing of this message- is full of lite. The actual data: starting from the top of this page- "Firefox Help... Ask a new..." etc. starts 5 1/4 inches from the left of the page.
    It's as if Firefox were presenting a wider page with the presentation moved to the right. This pushes the last, normal, 5" of the presentation off the screen.
    The rite end of the bar which starts out: http://www.mozilla.com/en-US/firefox/fx/
    is off the page, so the facilities at the rite end are lost.
    Any presentation, including Amazon.com and Youtube.com are similarly pushed off the rite side of the screen by 5".
    I have no access to the rite-most 5" of any internet presentation.
    The sliders that move the presentation up and down and left/ rite are off the screen.
    I have shrunk the display down so small, i can barely see the numbers: Control panel\ display \ settings \ 1920 by 1200. This gives the ILLUSION of centering the presentation, but still no sliders. At this setting, i can see the full width of Amazon. Youtube appears centered, with 4 1/4" on both left and rite, but no edge sliders.
    I dropped the 'setting' to 1440 x 900.
    Lost about 3" off the rite side of Amazon; barely on the rite edge of Youtube.
    None of my local programming has a problem: Excel, pictures, videos, Word, even Internet Explorer goes full page and centered.
    I un-installed Firefox and downloaded it fresh. It did NOT ask me to reboot my puter, so i didn't .
    I can supply pictures (screen shots) of the phenomenon on request.

    - Open Firefox -> got to Help Menu -> select "Restart with Add-ons Disabled"
    Firefox will close then it will open up with just basic Firefox. You can enable the Add-ons later. Check if its working.

  • Subject : Slideshow looks bad  Hello guys  I have a project in my Final Cut just about done.  I want to add my slideshow as part of the project and burn it to DVD.  In my slideshow, there are some stills from the movie clips and some downloaded from the i

    Subject : Slideshow looks bad
    Hello guys
    I have a project in my Final Cut just about done.  I want to add my slideshow as part ofthe project and burn it to DVD.  Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it.   Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow.  Thank you
    PSC

    Thank you Ross.
    The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto.  The Final Cut project was rendered prior to export to QT,  the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not.  The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not.  I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536.  Please enlightenme.  Once again, thank you so much,I really appreciate the time you offered.
    psc

  • When I put in a DVD, the mac locks up, an image from the DVD stays on the screen even when the dvd is removed.  The only way to remove the image if to do a hard shutdown.

    When I put in a DVD, the mac locks up, an image from the DVD stays on the screen even when the dvd is removed.  The only way to remove the image if to do a hard shutdown.
    Is the hardware corrupt?

    Could you be a little more descriptive, does this happen with all DVDs? Please describe the type of DVDs you are attempting to use, commercial movies, blank DVDs, etc...

  • The Folders Panel has disappeared from the left side of my elements 11 Organizer. How do I get it back?

    The Folders Panel has disappeared from the left side of my elements 11 Organizer. How do I get it back?

    See the icon bar on the bottom: click on the leftmost icon to restore the left panel.

  • Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation appearing rightside height is more than the left side. In reverse manner from the left side.

    Hi from few days onwards i found one abnormality in my iphone4s .That is if i observe my phone settings screen from right side of the device top navigation bar appearing rightside height is more than the left side. In reverse manner from the left side. I dnt know whether it is default feature of iphone or not but i am really disappointed due to this. So please anyone help me in this issue and let me clear my doubt and make me happy. Thanks in advance.

    I believe what you are seeing is an optical illusion when viewing the screen from the side. Try to align one of the one of the options in Settings, like General, with the navigation bar you'll see it does the same thing.
    Hope that helps

  • How can I move Whatsapp or google   photos from the camera roll to a different folder

    How can I move Whatsapp or google   photos from the camera roll to a different folder

    How can I move Whatsapp or google photos from the camera roll to a different folder
    The only way to remove photos from the Camera roll is to delete them. You cannot move them directly from the Camera roll to another album.
    Sync the photos to your computer, remove them from iPhone and resync the photos to your iphone.
    See this -> iOS: Importing personal photos and videos from iOS devices to your computer

  • My desktop icons mysteriously moved from the left to the right part of the screen. When I try to drag them back to the left, they pop back to the right when I release the mouse. What can I do?

    My desktop icons mysteriously moved from the left to the right of the screen, and scrambled the order. When I try to drag them back to the left, they pop right back to the right when I release the mouse. What can I do to place them where I want them on the screen?

    A LOT of them dont appear.
    What do you see in the window when you click on those?  A blank, black window?  An exclamation mark?  What?

  • I cannot play a movie I just recently downloaded from the iTunes store

    I cannot play a movie I just recently downloaded from the iTunes store

    I purchased an album from the iTunes store VIA the wish list Purchase option.
    The 2 albums and 3 songs were purchased.    However, one of my songs was stuck in the "Computer is not authorized / Already Authorized" loop.  Where it asks me to authorize a song, but then says the computer is already authorized and doesn't play the song.
    I noticed looking at "Get Info" there were two key differences.
    The songs that were valid and would play have:
    Kind: Purchased AAC audio file
    Purchased by: **********
    Account Name: *****@gmail.com
    The one song that would NOT play and caused the authorization loop has:
    Kind: AAC audio file
    Purchased by:   <this field was NOT PRESENT like it was on the other files>
    Account Name: *****@gmail.com
    (**** = redacted, however the two Account Name fields were identical)
    As you can see, the Account name match, but the "Purchased By" field is missing and the Kind is not marked as "purchased".
    THIS IS A BUG.  As the entire album was bought under the same method, same time, and same account, yet, one file is improperly tagged, and does not play.  The trouble file was found in iTunes store, added to Wish list, and purchased in the same session, no other log-off, shutdown, or iTunes restart to cause a selection of anouther account name.
    This leads me to believe that iTunes is not properly tagging a file after it is downloaded that it has been purchased, thus, causing the loop.
    Apple can't blame anyone else here, as only apple hardware and software were involved in this.  MacBook Pro, OS X 10.6.  iTunes 10.7 (21)

  • TB subscribed to far too many of my message folders. How do I keep them ( 250) out of the panel on the left?

    I am a TB newbie, and did something unintentional: while trying to add one folder to the subscription list, I
    touched some key --- and there they all go. Cannot tell what happened. The panel subscribe still shows checks for the 40 or so I wanted to display, and has done so for a few days, but the panel on the left seems now to be a few feet long. The ~/mail directory on the server has this larger number of files... I have been using alpine for some time, and it was not an issue.
    This is related to another problem: if it can be solved, the other one above would not matter: No way was found to move a message from folder to folder using the KB only; is this possible?
    Any help would be appreciated

    Thank you so much, Niel!
    Very glad to be rid of the ? marks....its a little thing, I know, but quite annoying.
    Michael

  • How do I get the vertical menu's widget's sub menu to come from the left?

    I am using the vertical menu widget and want to make the submenu come from the left of the parent item. Muse only offers the choice of the submenu coming from the right. Is there a cheat to sort this anyone's aware of? If not, is there a widget out there that would allow me to do this.

    Hi Anshul
    When I tried to replicate your video on my machine, it didn't work in the same way. I have a button on the site that links you through a drop-down menu of five options and from each of them comes several (between 5 and 10) other pages, via a drop down menu, currently on the right.
    Your video shows setting the Menu Type to All Pages, but I can't do this as i have to set it to Manual. I also cannot open all the child menus at the same time, as you do in the video. I can only do one set at a time.
    I can move the menus from right to left without a problem but when I re-open the menu, it's gone back to the right. Any suggestions?

  • Built-In Microphone records audio only from the Left speaker

    I'm not sure if my settings are correctly set up, but whenever I record through Logic, it only picks up sound from the Left Speaker of my MacBook Pro.
    When I try to make noise through the Right Speaker, Logic's sound levels do not respond.
    Any ideas why this is happening? I don't plan on using the built-in Microphone for much longer, but it's all I currently have at this point. Thanks!

    James,
    Again, thanks for the response! I guess what Tokuda said about the mono Mic in the left speaker settles that. I was just confused, because when I used Sound Forge on my Windows partition, it would always pick up sound from both speakers (I think?). I could be wrong on that one too though.
    As for goals, my long term goal is to produce Club/Dance music & some serious Vocal work with Logic. Only thing is I have no basis or ground knowledge of music. For instance, I don't even know how to play the piano, or read music for that matter. Sad, I know...but it is a work in progress. And the only Microphone I use is built-in and my voice overs always sound so bland & one-dimensional. No dynamics or great effects to them, like Tpayne, BSpears, or Madonna vocals. Not sure where I should start, maybe take some basic music theory courses at the local community college, grab an internship at a radio station, & then further my education @ SAE, or Berklee College of Music to learn more advanced editing techniques.
    In the meantime, I have been producing Cheer, Dance, & Aerobic music for the past 5 years. It first started as a hobby, and then transformed into its own little business, and now I do hundreds of mixes for Cheerleaders & All Star programs all over the place! It came so natural to me though...Laying beats over songs, then adding my own creative touch to make it my own. I've been using Acid, which is GREAT for what I do, but isn't going to get me much further than that. That being said, I finally made the decision to move up to Logic, not only to broaden my musical horizons, but to hopefully continue making Cheer music with it as well.
    Since Acid is PC only, I still do work on my desktop PC and have been slowly weaning myself from it. The Logic learning curve is extremely difficult (for me at least) and it's taken a lot of getting used to some things like NOT being able to cross-fade my loops. Very, very annoying. Nonetheless, I know I have to make the switch to Mac if I'm really serious about making it anywhere in this biz.
    Anyway, I can totally email you one of my mixes (if you're interested). I would post a link here, but I gather most of the musicians on here wouldn't really appreciate it as much as I do, haha. Oh and by the way, thanks for taking the time to listen & help me out here. It means a lot man!

  • HT4906 PHOTO STREAM DISAPPEARED FROM THE LEFT SIDE OF MY IPHOTO. THEREFORE IT DOES WORK. HOW CAN I GET IT BACK?

    I LOST "PHOTO STREAM" FROM THE LEFT SIDE OF MY "IPHOTO". THEREFORE THERE ARE NO PHOTOS STREAMING. HOW CAN I GET IT BACK?

    See the icon bar on the bottom: click on the leftmost icon to restore the left panel.

  • Tell me how to make Ctrl-B open the bookmarks panel on the left side and NOT open Bing.

    For years the Bookmarks panel on the left side would open when I press Ctrl-B. Now it opens Bing. How can I fix this?

    Does the sidebar open correctly if you use View > Sidebar?
    *Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
    There aren't any extensions listed in the System Details List that could cause this, so I'm not sure why this would happen.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Are you sure that you aren't opening a specific bookmark in the sidebar?
    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.<br />
    You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).<br />
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    Make sure that "Load this bookmark in the sidebar" is not selected.

  • CS6:  'lost' the T Type tool from the left hand tool bar. [was:A question]

    I have CS6 and ghave suddenly 'lost' the T Type tool from the left hand tool bar. How do I get it back please?

    Do you have the Text on a Path tool in it's place, or no tool at all? If you press and hold any tool with samll triangle in the lower right corner, like the text tool, it will expand to show you the other tools available in that spot.

Maybe you are looking for

  • Why does it take soooo long for my mac to boot?

    I have an Early 2011 15 in macbook pro with the 2.2 i7, and the hi-res screen, and I upgraded my memory to 8gb about a year ago. Recently if I restart/cold boot my computer it takes over 6 minutes for me to see the login screen.  But I can sign in no

  • PASTE NOT WORKING WINDOWS RT

    When I copy from a pdf document and then try to paste to say word or one note it just elliminates all spaces so it looks like one jumbled site.

  • MDT 2013 - Error creating WIN 7 Reference Image

    Hi Guys, I am pulling my hair out! I have tried to create a .wim image of a Win 7 set up on a VM machine (VM Workstation) I have used the MDT task sequence, standard client task sequence.  It has always failed on the creating WIM image stage.  I have

  • I trusted Time Machine

    In an effort to escape the problems with Lion I did a clean install of Snow Leopard, and assumed that I could restore from Time Machine. This worked fine for documents and a few simple things but nothing else. I have now lost all of my e-mails, almos

  • My tag searches return pictures they shouldn't (sometimes)

    I am using elements 9 on a Mac. Some of my searches using tags return pictures that don't match. Doen't happen with every tag, but the tags that do it seem to do it each time. Any help would be appreciated.