Move lvlibp in project

Hi,
In my project I have a number of PPLs. I wanted to arrange my file strucutre, so I wanted to move all the PPLs into one folder.
-Going to Files view and right clicking has no "move on disk" option
-right clicking wihtin the project shows no "replace with..." option (grayed out)
-moving it from outside LabVIEW results in a horrible mess, as LabVIEW asks me for each element of the PPL where to load it from.
So... how do I move the PPL?
(Using LV14)
Thanks,
Danielle
"Wisdom comes from experience. Experience is often a result of lack of wisdom.”
― Terry Pratchett

While they do sometimes cause me to bang my head against my desk, I like PPLs. At this point in development, I would rather not move the PPLs rather than do without them However, I find it difficult to believe that there is no option to move them in LabVIEW...
Thanks for the answer
Danielle
"Wisdom comes from experience. Experience is often a result of lack of wisdom.”
― Terry Pratchett

Similar Messages

How to move an iMovie project to an external drive ?

Hi I need to move my iMovie project to an external drive, to free some space, please help. if it's possible.....

To make sure that all required media is in the library contain the project you need to "Consolidate media" see: http://help.apple.com/imovie/mac/10.0/#mov882dee351
You can then copy the library to your laptop with the Finder and open it with the same version of iMovie. The last phrase is important since Apple has made changes in the project format several times even between minor updates of iMovie 10. Earlier versions may not be able to read the library and later versions (not possible in this case) may cause the project to be updated so that it is no longer readable by the desktop version. iMovie on the laptop will not at first find the copied library - you will have either to double click on it or File - Open library - Other and navigate to its location.
Geoff.

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show pr

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)? I tried backup & restore without success. I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there. Only the text that I entered shows. I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.

UPDATE: By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored. When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer. Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location). No Windows or Elements search revealed this fact. I am appreciative that I just got lucky. The Adode/Photoshop company was absolutely of no help. If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product. Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed.
Bottom line: All of the projects (sideshows) have been recovered and work in my new Windows 7 computer. I hope my experience helps others.

How do I move an imovie project on a macbook pro to an imac

I have an imovie project on a macbook pro. I can't seem to export the movie. I keep getting processing error -108. I want to shift my project from my Macbook pro to my Imac. How do I do this and import into imovie?

Hi
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
BTW:
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W

How do you move events and projects between Libraries in iMove 10

I am running OSX 10.9.5 (Mavericks) & iMovie 10.0.5.
I am trying to free up space on my internal 1TB hard drive and want to archive events and completed projects onto an external hard drive, which has a second iMove v10 Library on. Under V9 of iMovie this function was easy, but I am struggling under V10.
What is the correct way to move events between libraries in iMovie.
When I attach the external drive containing my second iMovie Library, open it I can see all existing events stored (by move) under version 9 of iMovie.
Reading the Help (extract below) for this function it implies highlight the Event to move & then drag & drop into the second Library.
Shift+CMD with drag and drop onto the second library at the library name level will move Events that are not tied to a project, but for completed projects (Finalized under V9 or shared for example with iTunes in V10) it seems these can not be moved, the above function only copies them to the second library.
I have tried all different combinations of the Fn, Ctrl, Option CMD keys etc with and without SHIFT and the ones that work for this function only copy the event. I can not seem to get an event moved once attached to a project. File - Move Event will also move Events not tied to a completed project.
I have also tried copy to a second Library & then to delete the original events. Again it appears you can not delete events tied to a Project.
What I have also not been able to find is how to move a finalised Project to another Library and then see if events attached to that project would then move.
I have been able to move Events not tied to a Project to the second Library, then create a new project within this Library. This helps with all new projects & future import of Events. But does not help me free up current space by archiving.
Extract from help
Copy or move projects, events, or clips between libraries or storage devices
         Connect a storage device that contains the target library to your Mac, or copy the target library to your Mac.
         Choose File > Open Library, and choose an option from the submenu.You can choose from recently opened libraries, locate an existing library on your Mac, or create a new library.The selected library is opened in the Libraries list, with the first event selected and its contents displayed in the browser.
         In the Libraries list, select the event that contains the item you want to move or copy.
         In the browser, select the item you want to move or copy.Tip: To select multiple clips or projects in the same library, hold down the Command key as you click the items you want to select, or drag a selection rectangle around the items.
         Do one of the following:
To move items between events or libraries: Drag the clip or project to another event or library.
To copy items between events or libraries: Option-drag the clip or project to another event or library by first starting to drag and then holding down the Option key as you drag.
Would appreciate any help on this matter.
Thanks
Colroy

Further to my original post below; I have done further analysis and it seams that if you have events tied to a project (mine are all finalised) you can not move events between Libraries. However, events that are not tied to a project can be moved. Either by Shift CMD or by using File- Move event.
What I have not been able to find is how to move a finalised Project to another Library and then see if events attached to that project would then move.
Copy works for events attached to a project. I have also tried copy to a second Library & then to delete the original events. Again it appears you can not delete events tied to a Project.
Does anyone know how to archive (move) Projects and/or events in iMovie 10.0.05 under Mavericks 10.9.5 to a second library on an external drive.
Thanks
Colroy

Best way to move 2 iMovie projects to 1 iDVD project?

I am in a last minute bind and I was hoping I could get some help! I am making a DVD for my wedding reception that is NEXT weekend. ah! Anyway...here is what I have done:
1. Created three slideshows w/ KB effects in iPhoto and exported them to quicktime movies. (Question on that if anyone knows - only had three quality levels for that creation, and I chose the highest. Is this the best way to turn these slideshows into movies for eventual incorporation into a DVD??)
2. Imported all three slideshow movies into iMovie because I want them to play back to back (and found iDVD can't set it up that way) - added title slides between them & stitched them together in their entirity. Now I have one, big movie creation in iMovie that I want to be a feature on my DVD
3. ALSO created an interview/tour video of our home and town to show at the reception. It contains multiple clips (over 120 edited) from a video camera, extracted audio from the video clips (for some), imported song files for background music, transitions, titles, etc. Now I have one really nice, almost 25 minute video video that I want to be a feature on my DVD.
What I want to do:
I want both of the movie creations I just described to be on my DVD. (I am planning on doing a third, if it fits & I have time, and I can do the same thing with that based on whatever advice I get.) The DVD will be really simple - just a single title on the main screen of the DVD for each movie b/c they will be played at different times during the reception.
My questions/concerns:
I looked at my options for getting my creation onto a DVD - here is what I found:
1. I can share straight to iDVD - but it appears I can only do that for a single movie per DVD project. When I went to share the second movie, it asked me if I wanted to save my original DVD project before making a new one. So it doesn't seem like I can "share" multiple movies to the same DVD project. Also, when you do this - what is really happening?? It didn't take very long, so I know it wasn't copying files over. Is it just making links back to the referenced files, and will somehow write a movie when I actually burn the DVD? If so, what then will be my options for creating the movie??
2. From iMovie, I can export a project in a number of ways (to video camera, quicktime, email, web, etc). I am assuming that quicktime gives me the best, but not sure. The PROBLEM is that when I exported my main (25min) video, it was over 5GB!!!!!!! That seems a tad big. I forget the size that a DVD can hold, but it just seems like there should be a better way, and this is too big (maybe not?).
Needs:
As I have stated, this is to be shown at my wedding reception (and maybe parts at the rehearsal dinner). Primarily it is designed for an overhead projector, but obviously it will be watched on TVs/computers at some point.
I am wanting to make sure the video(s) is the best quality I can make it so that it all comes out well. This is my FIRST project, so there are several things I just don't know enough about at this point - learning with this important video, must be crazy!! It looks REALLY good so far, now it is just outputting it so I can show it to the world.
Thanks for ANY pertinent help you can provide, and please, limit responses to the actual things I am asking about as I don't have a lot of time to wade through things trying to 2nd guess & pick what I need. That would be very helpful!!

You can do it in one of two ways (I have done both):
1. Follow the procedure I outlined using Toast Titanium. You don't have all the bells and whistles of iDVD in the final product, but you have a working DVD. And there has been an ongoing issue with encoding in iDVD where the process hangs or slow way down, especially at the audio endoding stage.
2. Start a new iMovie, and then copy and paste the clips and audio from your other iMovies into the new one. I tried importing but could not figure out how to do that or if it is even possible. The process of copy and paste is tedious and problematic, especially with the audio tracks and if anyone else has found a better way, I would really like to know. But this does work, but be prepared to spend some time. But it has the advantage of you being able to pick and choose.

How do I add another movie to the project area to work on without it being attached to a previous project?

How do I add another movie to the project area to work on without it being attached to a previous project?

No. I have a number of items in the Event Library. I am trying to move some of them to the Project Library and when I do it attaches itself to the other project I have there.

After rendering a movie, the DVD project screen doesn't display

Q. After rendering a movie, my DVD project screen won't display?

Hi and welcome to the forums!
Sorry to hear about your mishap.
Do you have a backup using desktop manager? If so, your data is in there. Had you recently sync'd with outlook?
Did water get into your BB? If so, place your BB in an open container of UNCOOKED white rice and set in a warm place for a few days. Rice should absorb the water.
Let us know!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

I'm trying to title a movie event...won't let me. Do I need to first move it to project library? Can't figure that out.

I'm trying to title a movie event...won't let me. Do I need to first move it to project library? Can't figure that out.

Yes, you have to create a Project first. In iMovie's menu select File>New Project. Now drag clips (or portions of clips) to the Project from the Event. Drag titles from the Title pane on the lower right of the iMovie window (Click on the T icon to activate the Title pane). The title can be dragged onto a video clip in the Project or to a gap between clips. In the latter case you will be able to select a background from the pop-up "Choose Background" panel.
John

How to move my iMovie project?

How do I move my iMovie project (not the .mov file) to another Mac computer so I can edit it on receiving computer?

Do this. http://help.apple.com/imovie/#mov3ac6c7c9
After first doing this.
http://help.apple.com/imovie/#move7d66613

I have been trying to create a movie from a project that is primarily stills and one video clip. I cannot successfully create the movie without iMovie shutting down unexpectedly. Any ideas for the cause of the problem?

I am getting an unexpected shut down of iMovie when I try to share a movie from a project that is made up of still pictures, one video clip and music. Have tried to create the movie several times with different formats and continue to get the message. When I removed all music I was able to create the movie without a problem but when I added the music back, I was unable to create the movie. I'm using iMoive 11' version 9.0.9
Thanks.
Bill

I'm no expert in iMovie, but I've found that processing memory (as well as sheer hard disk space for the project to 'turn around in') can be a big issue with constructing, editing, and distilling projects in iMovie. I've improved the success by moving 2gb of image files off to an external drive, but only really got moving again on an hour-long project by doubling RAM and again freeing up h/d space.
Some tunes are also an issue, but if you can see it in the iTunes list to place in your project, it should work okay... Does the project run with any other piece of music, or does just that one tune mess it up?
Good luck,
Laura

How do I move existing Logic projects to an external hard drive?

My internal hdd is getting close to capacity on my iMac so i've purchased an external 500GB USB hdd.
I have about 10 existing projects that i'd like to move to my new drive.
These projects consist of WAV files imported from a portable digital recorder, fresh recorded tracks using my audio interface, and midi tracks. Most of my tracks are at the 'final mix' stage and are sounding pretty sweet
Would it benefit me to move my Logic projects to my external drive, or should I scrap the idea and move my huge itunes library instead? If it is worth moving my Logic projects - what is the best way to do it? I really don't want to have to remix, re-record anything. I also don't want to get lost in Finder.
I'm quite new to Logic but I intend to 'use best practice' if possible. I get the impression that using an external hard drive with Logic may offer performance gains. My audio interface is firewire (M-Audio FW 410). The USB external hdd was brought to avoid firewire conflicts.
Any tips would be most welcome.
Thanks in advance. Rich

In theory, you should be able to copy all of your projects to the external and open and use them exactly as before with no problems and no need to re-mix anything...
BUT, and its a big BUT...
Are you sure all of your projects were started AS projects with all the audio files, instrument samples etc. stored in the relevant folders in the project's folder?
Before doing anything, go through all of your "projects", make sure they ARE projects (there should be a project folder, the song file stored in the project folder, with audio, undo etc. folders within the main project folder for each one) - if they are not, do a "save as project" - it should give you a number of options to copy any external audio files etc. to the project folder. If for any reason it doesn't I would then choose "project - consolidate" from the main file menu, which will give you the same options. Even if you are SURE that all your projects ARE projects, I would choose "consolidate project" just to be sure...
You should then be able to proceed... but don't delete the originals until you are sure everything is working fine. I would even suggest backing up the originals in another location (it could even be a back-up folder on the same external), so you can just move them straight back to the original location if there are any problems.
When I first started using Logic many years ago there was no option to save projects, and I learnt the hard way to create the folder structure that logic now does for you. But even so, unless you started out knowing how to use this function, its possible some of your audio files are still stored in the wrong location. "Consolidate project" should solve this.
As for the USB HD - I would avoid using a USB drive for audio. It is said that USB 2 is faster than firewire 400, but I don't know any musician or film maker that would use one.
You can daisy chain firewire devices with no problems in my experience. If you do experience problems I might suggest you search up on any posts to do with M-Audio interfaces and Macs...
Good Luck!

MacBook Pro with SSD that has a limited disk space (120GB). Rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.

I'm using MacBook Pro with 128GB SSD that has a limited disk space. As we know, when rendering in Project File (User/Movies/Final Cut Projects), it takes huge space and the limited disk space would not be enough for the whole editing.
My question is, Is there any method to get the rendering Projects file saved into an external hard drive which is connected with USB/ Thunderbolt/ Firewire, with huge disk space (eg. 500GB HDD).
Now, new project created in my Mac is automatically saved in (User/Movies/Final Cut Projects) and my Mac has ran out of space to hold the files.
Thank you.

You have at least 3 different ways to show the project library:
1) Go to WIndow->Show Project Library
2) Click the button in bottom left of your window:
3) Hit the keyboard shortcut (Command-0)
The project library will be shown, occupying the area where the timeline usually is.
Your hard disks will be visible. Click the hard disk where you want the new project to reside and hit Cmd-N to create a new project.

How do I move Final Cut Projects from internal to external?

When moving a Project from my internal drive to an external I find that in User > Movies > Final Cut Projects the files still exist despite being moved in Final Cut Pro X.
Again, all I'm looking to do is move ALL files from my internal SSD to an external RAID volume. Any ideas on how I can successfully do this?
I've read the FCPX User Manual and the forum questions, but none address why project and event files unsuccessfully transfer. : (
Any help is greatly appreciated.
Graham

Hello Tom,
I moved the Project Files by command dragging inside of final cut pro X to the RAID volume.
That didn't move any of the project files however, so I then manually moved them into the RAID volume and then relinked them.
Now I'm left with this 65GB render files folder, which I assume loads the project data faster than if i did not have the render files. That's great but I'd like to be able to move them to the RAID volume without (needlessly) regenerating the files... what do you think?
Graham

How to move imovie '08 projects and events from one macbook to another

Hi,
I need to import my movies via firewire, but can only do it through my brother's macbook, as my new macbook does not have firewire.
Therefore, I imported 100 GB worth of movies onto his computer, then transferred the iMovie Events and iMovie Projects folders onto a hard drive, then transferred them from the hard drive to MY macbook. Now they are sitting on the desk top.
How do I get them into iMovie on my macbook, now that I have transferred the files from my brother's macbook onto my macbook's desktop?
Thanks!

I guess I just needed to drag my events into my user folder ---> movie events, and then when I launched iMovie, it found them.

Move lvlibp in project

Similar Messages

Maybe you are looking for