Move mailboxes between server and computer

Somehow my mailboxes have become scrambled beween those on the server and those on my computer. Can I restore the original storage?
Lelteto

Hi,
In your case, please make sure that the Migration.8f3e7716-2011-43e4-96b1-aba62d229136 mailbox exists by running the following cmdlet.
Get-Mailbox -Arbitration |fl name,alias
In my last reply, I recommend you check if there is any related error or warning in Application log in Event Viewer.
Also, you can export your mailboxes into pst files and then import these pst files.
Hope my clarification is helpful.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Similar Messages

No connection between iPhone and computer

I have No connection between iPhone and computer. Please help me. My iPhone (4s) went nuts a little while ago. Nothing happend when I connected the charger. I had to take out and put it back in again and again and again, between 2-10 times before the charger finally was connected. It's been like this for a while now and a did'nt really have that mutch problem with it. Until today when I tried to sync/backup/restore the whole phone. It started to sync but stoped at the sync of the 5:th app. tried to start over but now my computer can't "find" the phone. It says that the USB-device is not reconizeble.
Please help me.
Sorry for the bad english.

See Here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes
iPod appears in Windows but not in iTunes
Also, Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Internet sharing between cellphone and computer us...

I have watched some videos in youtube about internet sharing between cellphones and computer using "BLUETOOTH"... How do they do that? How can we do this? Anybody here can share to us how to do this??

24-Aug-2008 12:28 PM
monkeyboy85 wrote:
I personally would not of thaught this is possible as bluetooth is essentially just a radio signal, obviously it can transmit data but i dont think it has the ability to stream a broadband connection. Could be completely wrong but thats what i think.
You are wrong
Most Nokia phones with a bluetooth interface can let you connect your computer to the Internet using your phone as a modem connected by bluetooth. So, BT definitely can support the data stream.
Enabling a computer to use the phone's Internet connection over BT or via USB cable is possible with no additional software on the phone. Doing the opposite, allowing the phone to use the computer's Internet connection via BT, requires additional software. GNUBox does just that.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

Serialize the object between Server and Client?

Hello friends,
What is the important to Serialize the object between server and client?
Thanks
tamilvanan

in which context ??
Anyways,checkout the below link and try to understand how do we convert Serializable Object's State to in Stream and send it over network.
http://java.sun.com/j2se/1.4.2/docs/guide/serialization/examples/index.html
Hope that might help :)
REGARDS,
RaHuL

Bandwidth between server and client

HI
What is the minimum bandwidth can be allocated between server and client?

Hi,
Your question has no standard answer. The minimum bandwidth is variable to each specific system. It depends on many other factors too.
Thanks,
Gordon

Speed between server and client when using FML

I using FML between server and client, the server access oracle using only 5 ms, but when tranfer back to client, it about 100ms long. I tuned my hp-ux 11 kernel and tuxedo config file, but useless, Why?

Hi Tumecan,
Your expected information available here, check.
Frontend Network Load - Network Integration Guide (BC-NET) - SAP Library
few related SAP Notes:
164102 - Network load between application server and front end
500235 - Network Diagnosis with NIPING
62418 - Network Load of SAPGUI Frontend Communication
679918 - The front-end network time
578118 - Long response times on the SAP GUI
161053 - Using SAP GUI in WAN
Regards,
V Srinivasan

Screen sharing between server and iMac appears to connect but no window opens

We have been trying to screen share between a server and iMac. Both are running Snow Leopard 10.6.7. It seems like we connect using the share screen app because we don't get any error messages after inputing the username and password but no window opens for the server we are connected to. When I look under the windows tab I can see a checkmark next to our server name and trying 'bring all to front' doesn't do anything. The video card on the server died and was removed by our tech support who said we could still access the computer via screen sharing. Would the server not having a video card be the cause of our problem?
Thanks.

Hi,
A Bit for other reading this thread.
To change the Login port for any AIM based name you have to obviously Log out first and then Change the port (SSL might need to be selected first) and then Press Enter to "Set" the port.
This use of the Enter key is the bit that is different to earlier versions of iChat.
For Gary,
Which Thomson-Alcatel device do you have ?
Thomson-Alcatel Speedtouches used to work well when the firmware that ran them was at Version 4.2.5 or less.
At least at this level you could access the device via Terminal using Telnet and then access the Command Line Interface (CLI) and "Unbind" SIP from port 5060
Later versions of their Firmware did not allow for a full Unbind of SIP and Video and Audio chats could only be partially successful (about 15 buddies out a list of 50
Of course using UPnP to open ports for iChat 4 helps with the Screen Sharing as the process is an Screen Share with an Audio Chat along side and both have to work/connect.
I am surprised to hear that in iChat 5 that Screen Sharing is not working when Video and Audio chats are.
For this reason I would ask how the ports have been opened in the Thomson device ?
After that I would keen to know if the Thomson Device or the Time Capsule is doing DHCP to the LAN ?
(Share an IP on the Time capsule is to Enable DHCP)
I am not sure how AT&T expect anyone to use their site to gain help or see what they currently offer when you have to type in a phone number or area (ZIP code).
I did enter the example number and got to this set of pages http://www.att.com/esupport/main.jsp?cv=801#
I see no reference to any Thomson-Alcatel device.
8:15 PM Monday; February 15, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Time sync between server and client

Hi guys,
I have written a chess server and client. My next step is to implement a clock which will be used in timed games, however, I am not sure of the best solution. I can't think of a reliable method to keep the client's time in sync with the servers because the event latency varies between individual events and clients.
My first idea was to send a 'tick' event every second but I dont think this the best solution. I have seen many applet based clients which have timers, such as Yahoo chess.
I know this question is a little vague, I can give more detail if needed.
Thanks,
Alex

To prevent client-side cheating, the server should keep the
"official" clock. Every so often (perhaps when a move gets made?),
notify both clients of the official time. Clients count seconds from
that official time.
This is a suboptimal solution because it leaves clients vulnerable
to network lag. I can't think of any other solution that doesn't give
clients some responsibility for tracking time, though, and that's a
big security hole.
If you're willing to open that hole, have each client report back to
the server the elapsed local time from when they recieved the
last move to when they made their move. Then update the other
client's clock accordingly.

Is it possible to sync mailboxes between iMac and iPad

I am trying to sync up my mailboxes between my iMac and my iPad. Using Apple Mail App on both devices. Using non-mac email on App. The only place I have previous messages stored is on my iMac. Is there a way to sync them up?

The folders that you set up in Apple Mail on the Mac are for local storage only and will not sync to the iPad.
If you had an IMAP email account, any folders that you had in the account on the server would have already synced to the iPad when you created the email account in the mail app.

Move stock between quality and un-restrict

Hi all,
Is there any possibility in moving the stock between quality and un-restrict excluding release production order/ GR PO to get the procedure.
When I use MB1B/MB11 with the correct movement type, the system shows: You can move it in QM only.
My background : I activate the QM view in my system, and activate QM type: 01.04.89 for most materials.
Thx for your information.
Wilson

Hi
If you want to move the stock from QM stock to unrestricted , do not activate QM view.
check the box " Inspection stock" (MARC-INSMK) either in Purchasing view/work scheduling view.
For some materials if you do not want to activate full QM functionality ,but still to inspect visually before accepting at GR stage.
This functionality will be of much use in cae of maintenence items.
Hope this solves your problem.
Regards
YMREDDY

WPA8.1 Feature to save and move files between folders and OneDrive Folders

Hi,
I would like to suggest to dev team a new feature to Adobe Reader on Windows Phone.
Today I was done a uggly workarround to save one PDF file on a OneDrive folder to send to my classmates. So I would like a feature to save and move files between folders on SD cards and OneDrive to keep my phone organized.
thank you for your time.

Here:
property aFolder : "a"
property bFolder : "b"
property cFolder : "c"
property dFolder : "d"
property eFolder : "e"
tell application "Finder"
try
set theLocation to the selection as alias
on error
set theLocation to (folder of the front window as alias)
end try
if not (exists folder aFolder of theLocation) then make new folder at theLocation with properties {name:aFolder}
if not (exists folder bFolder of theLocation) then make new folder at theLocation with properties {name:bFolder}
if not (exists folder cFolder of theLocation) then make new folder at theLocation with properties {name:cFolder}
if not (exists folder dFolder of theLocation) then make new folder at theLocation with properties {name:dFolder}
if not (exists folder eFolder of theLocation) then make new folder at theLocation with properties {name:eFolder}
set this_list to every file of theLocation
repeat with i in this_list
if (name of i) begins with "a" then
move i to folder "a" of theLocation
else if (name of i) begins with "b" then
move i to folder "b" of theLocation
else if (name of i) begins with "c" then
move i to folder "c" of theLocation
else if (name of i) begins with "d" then
move i to folder "d" of theLocation
else if (name of i) begins with "e" then
move i to folder "e" of theLocation
end if
set name of (the result) to items 3 thru -1 of (get name of (the result)) as string
end repeat
end tell
(98558)

Capture http traffic between server and proxy

Hi,
I am not a solaris admin so I need some help to capture http traffic between proxy and server.
I used 'snoop port 80' on my proxy server but this command gives me the traffic between client and proxy.
PS: i do not have access to remote server.
Thanks
Linda

You probably need this instead:
snoop host server
where server is the hostname of the server that you are trying to connect to.
If you have multiple interfaces, you have to be sure you are snooping on the right interface.

Best way to move files between FCPX and Motion?

What is the best protocol for bringing files back and forth between Motion and FCPX?
How do I save out from Motion for import to FCP? Is it with Templates?
Whats the drill?
I have looked at both the helps and am coming up short.
Thanks.

If you're simply working in generic Motion project, ProRes 422 Quicktime files are the best format for going back and forth.
If you want to save a Motion project to use as a template in FCP X, it has to be one of the template Motion project types. Title, Generator, Effect, Transition. You would select these from the Template Browser that opens first when Motion is initially launched.
If you want to start creating templates, I stronly recommend Ripple Training's "Rigging and Publising" video course for Motion 5.

Dental office management software cannot share between server and workstation

The wsetup files that are located in c:\softdent on the server are not visible on the workstation and the installation will not run until this is resolved.
The map drive (z: ) doesn’t show the files that are located on the server. The file that should be in z:\setup (folder called wsetupfiles ) does not exist but is live on the server.
The permissions on the server or WS are incorrect.
What can be done.

Hi,
Could you let us know what's the management software? Were your Server and client all Windows system?
If yes, what's the version of them?
Could you ping Server from client either via IP address or Server name?
This article could be used to troubleshoot:
Find PCs, devices, and content on your network
http://windows.microsoft.com/en-in/windows-8/find-pcs-devices-content-on-network
Karen Hu
TechNet Community Support

Move mailboxes between server and computer

Similar Messages

Maybe you are looking for