Move metrics data from one EM repository to another

I have a test EM Grid Control environment that has been running for over 1 month.
I just set up a new production environment with a separate repository.
Is there a way to move the metrics data from test to production?
Thanks.
Wade.

I was in the same situation as yours. I move the repository database from development server to production server. I also renamed the databases to conform to our internal production database naming standards.

Similar Messages

How to move BCS data from one box to other

Hello Expert,
Dose any one know how to move BCS data from one box to other box ?
Thanks & Regards,

1) The best is to do the test. In my case, my customer was just doing this transfer (in full) to perform tests on the BEX reportings. Actually, they never raised any issue regarding document number when they did additional postings in test system... I would also say that during the transfer, the number counter in Qual gets not synchronized with the one in Prod. So, I think the system will just take the next number available in Qual. Should not be an issue.
2) As explained in answer 1), in my case, the purpose was not to perform data migration from one system to the other one. Thus, my customer never performed a subsequent consolidation in the target system. But, basically, the transfer copies all data : posting levels 00 to 30, for all periods you have selected + Additional financial data and sequence of activities. Thus, for me, everyhting is available in the target system, including COI documents. In other words, the "picture" regarding the data should be exactly the same between both system. The only thing you need to pay attention to is the customizing : it must be the same in Qual and Prod (example : date of acquisition and divestiture, structure of the group, etc...).
Another very important thing, is that your export data source must not be enriched due to the BCS Delta load scenario. If it is the case, the system will write the consolidation logic (i-e the consolidation group + reporting mode) when transferring the data from the source Real Time Infocube to the Target Real time infocube, which will lead to inconsistent data in the target system.

How do i transfer data from one internal tabe to another.

Hi All,
         How do i transfer data from one internal tabe to another.
         Can i do it ebven if he tables are different in structure.
Please Advice.
Thanks in advance.

Hi Saket Tiwari,
I hope the earlier post by kashyap is good enough an answer. anywas in addition to it let me give a detailed
explanation of how you can populate an internal table.
1) Append data line by line.
     Syntax : APPEND [<wa> TO / INITIAL LINE TO] <itab>.
this appends new line to internal table <itab>.
2) Using COLLECT statement.
             COLLECT is another form of statement used for populating the internal tables. Generally COLLECT is used while inserting lines into an internal table with unique standard key. The syntax for COLLECT statement is as shown
     Syntax : COLLECT [<wa> INTO] <itab>.
3) Using INSERT statement
     Syntax INSERT [<wa> INTO / INITIAL LINE INTO] <itab> [index <idx>].
INSERT statement adds a line/work area to the internal table. You can specify the position at which the new line is to be added by using the INDEX clause with the INSERT statement.
Now coming to your request..
To append part or all of an internal table
     Syntax
              APPEND LINES OF <itab1> [FROM <n1>] [TO <n2>] TO <itab2>.
*     Note:
Without the FROM and TO options, this statement appends the entire table <itab1> to <itab2>.*
b) To insert part or all of an internal table into another internal table
     Syntax
          INSERT LINES OF <itab1> [FROM <n1>] [TO <n2>]
          INTO <itab2> [INDEX <idx>].
c) Using Move statement.
To copy entire contents of one table into another in one execution
     Syntax MOVE <itab1> To <itab2>.
               OR
          <itab1> = <itab2>.
but u hav to be careful because he contents of itab2 will eb overwritten on the execution of this statement.
These copy the contents of ITAB1 to ITAB2. Incase of internal tables with header line we have to use [] inorder to distinguish from work area. So, to copy contents of internal tables with header line the syntax becomes,
ITAB1[] = ITAB2[].
Coming to the letter part of your question, Yes, we can copy values between tables having different structures.
for this we use
                            MOVE-CORRESPONDING <itab1> TO <itab2>
    this executes the statement for their header lines. Searches for the sub-fields which occur both in itab1 and itab2 and then generates, for all relevant field pairs which correspond to the
        sub-fields ni , statements of the form MOVE itab1-ni TO itab2-ni. The other fields remain unchanged.
I hope the information provided has been of your help.
Reward if useful.
Regards,
Jose

I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?

Concerning midi data in GarageBand for iOS: can we copy midi data from one virtual instrument to another?
For instance: I play my "lucky take" on the virtual piano, and now I am curious how it would sound on let's say a organ. Normally I would select the midi content out of the piano track and copy it into the organ track. I cannot figure out how to do this in GarageBand for iOS. Is there anyone out there with a solution?
Thanks!

It is limited, how you can move regions between tracks. Basically, you can move between tracks with the same touch instrument. See the help: http://help.apple.com/garageband/ipad/2.0/index.html#chsec12c15d
Move a region
Drag the region left or right to move it forward or back in time. Align the left edge of the region with the bar or beat on the ruler where you want it to start playing.
Drag the region up or down to move it to another track with the same Touch Instrument. You can also drag regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be dragged to another Smart Drums track.
If you move a region so that it overlaps another region, the overlapped part of the “covered” region is deleted.
Paste a region
You can paste a region you have copied, or paste an audio file from an app that supports copying audio to the clipboard. GarageBand supports 44.1 kHz sample rate, 16-bit depth uncompressed audio files.
You can paste copied regions to another track with the same Touch Instrument. You can also paste regions between Keyboard and Sampler tracks, and between Audio Recorder and Guitar Amp tracks. Smart Drums regions cannot be pasted to another Smart Drums track. Audio files copied from another app can be pasted to Audio Recorder or Guitar Amp tracks.
Move the playhead to the point where you want the region to start.
Tap the header of the track where you want to paste the region to select the track.
Tap the track where you want to paste the region, then tap Paste.You can also tap an empty area of Tracks view, then tap Paste. In this case the region is pasted into the currently selected track.

Migrate PY and TM cluster data from One SAP System to another

Hi Experts,
Could you please suggest me some options to migrate PY and TM cluster data from One SAP System to another? My requirement is to move all the cluster data (Active and Inactive ees).
I see that PU12 is an option. Anybody used that to migrate between SAP systems. Please provide some details
Points guaranteed
I see that using PU12 you can export only PCL2 Clutsers. Are there any ways to move the other clusters like PCL4 ?

Hi,
As far as data transfer, If have all normal configuration settings in your targeted system you can use LSMW (Use T.code AS91 in LSMW for recording) to transfer your data in your both cases.
Hope it resolves your both the issues.
Regards,
Murali

Transaction data from one cost center to another cost center

Hi All
Can any one tel me how to move the Transaction data from one cost center to another cost center .
My scenario is basically : Users posted for company code 1003 for Cost center S00570 for the period 01.04.2007 to 30.11.2007 but it has to go to company code 1000 instead of 1003 for the same Cost center .S00570 .
What we have done is that we have changed the cost center from 01.12.2007 on words to the correct company code 1000 and now all postings are going to the right company code ie
to company code 1000.
Now the problem is how to bring back the old historical data posted from 01.04.2007 to 30.11.2007 to wrong company code the 1003 to correct company code 1000 .
Is there a way to bring back the historical data which has posted to wrong company code .
Thanks in Advance .
Any help highly appreciated and points are assigned .
Cheers
Ravindra.

Ravindra
Once you have changed the company code in the master data, then the entries with respect to the different company code cannot be transferred. Please follow the process below and let me know if it works.
1. Revert the cost center master data to the original company code.
2. Repost the line items from this cost center to another cost center. Use tcode KB61. The cost center you will be reposting will be a routing cost center (say XXXXX).
3. Once all the line items have been reposted, change the master data of the cost center to the correct company code.
4. Again repost the costs from the routing cost center(XXXXX) to the correct cost center. You should have all the line items to the correct cost center now.
For more on reposting refer the link below:
http://help.sap.com/SAPHELP_470/Helpdata/EN/27/c98a46db7011d1a5400060086e9494/frameset.htm
Let me know if it worked.
Karthik Coneru

How do I transfer data from one exterior harddrive to another?

How do I transfer data from one exterior harddrive to another when they are both connected to our Imac Desktop?

Depends what you want to transfer...
A few more Details about what you are trying to achieve would be good.

Can I move/copy songs from one itunes account to another itunes account on the same iMac?

Can I move/copy songs from one itunes account to another itunes account on the same iMac?

You move the song files to /Users/Shared/ and then into iTunes from the other Mac OS X user account.
If you want to change the iTunes Store account associated with them, you need to redownload them from that account.
(60812)

How can I move purchased apps from one itunes account to another account?

How can I move purchased apps from one itunes account to another account?

You can't. The apps must be purchased separately.

Is there a way to move photos directly from one iPhoto library to another iPhoto library?

Is there a way to move photos directly from one iPhoto library to another iPhoto library?

Not using iPhoto - Aperture can or iPhoto Library Manager can
LN

Hi I have 2 apple id's one which has pulled through everything except my calendars and one which has pulled through just my calendars. How do I move my calendars from one apple id to another?

Hi I have 2 apple id's one which has pulled through everything into icloud except my calendars and one which has pulled through just my calendars. How do I move my calendars from one apple id to another so that I can see everything in icloud with one apple id?

Having read some other posts I think I have answered my question. If I was somehow able to terminate my old (unwanted) account and Apple ID I would no longer be able to access the material I bought with that ID- so I'm stuck. I have to learn how to manage that situation.
This is unfortunate for Apple consumers. Life is complicated for families these days and this "rule" although it is in place to prevent cheating and fraud makes things unnnecessarily difficult for me and my family as in my niaevity (sic) with the online world I bumbled into this situation. Not everyone is out to rip off Apple - one of the worlds richest corporations- or the entertainers who market their work through iTunes.I would just like to be able to enjoy the entertainment I pay for where and when I like to on whichever computer is available to me. And I'm not terribly computer literate.
It would have been nice to have had the opportunity to speak just once to a real person in the employ of Apple to explain my situation to them.

How do i move a picture from one pdf-file to another already created pdf-file with adobe reader?

How do I move a picture from one pdf-file to another, already created pdf-file, with adobe reader?

Reader doesn't have editing capabilities.

Passing data from one bsp application to another

Hi,
I have few queries that most of you would have done in ur projects:
1. I want to pass data from one bsp application to another:
eg based upon selected row of table view which populates material no and descriprion to another application which open the entire material master data.
Now, i have both the pages in diff bsp applications in place but unable to pass the selected material code to the second bsp application.
Had it been two different pages of same application I was able to achieve it with set parameter()
2. To stop the application from reprcessing the data:
eg: Suppose I have a bsp page where user fill details of a customer and on submitinng the details a customer is created in background and the entire page is disabled by my code. Even now if the user press refresh (F5) button then another customer gets created in the background. So basically i want to avoid the reprocess of the onSubmit event
Few lines of sample code would be very helpful.
Best Regards,
Saurabh Tripathi

Hi,
When I am writing the following code in appl1/page1:
        export abc from transactionID
        to data buffer lv_page_data.
        CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>SET_SERVER_COOKIE
          EXPORTING
            NAME                  = 'TRANSACTIONID'
            APPLICATION_NAME      = RUNTIME->application_name
            APPLICATION_NAMESPACE = RUNTIME->application_namespace
            USERNAME              = ls_name
            SESSION_ID            = runtime->session_id
            DATA_VALUE            = lv_page_data
            DATA_NAME             = 'lv_page_data'
and following code in appl2/page2:
CALL METHOD CL_BSP_SERVER_SIDE_COOKIE=>GET_SERVER_COOKIE
    EXPORTING
      NAME                  = 'TRANSACTIONID'
      APPLICATION_NAME      = RUNTIME->application_name
      APPLICATION_NAMESPACE = RUNTIME->application_namespace
      USERNAME              = ls_name
      SESSION_ID            = runtime->session_id
      DATA_NAME             = 'lv_page_data'
    CHANGING
      DATA_VALUE            = lv_page_data
   IF lv_page_data IS NOT INITIAL.
     IMPORT abc to transactionid
       FROM data buffer lv_page_data.
   ENDIF.
still the code doesn't work. Please explain and guide
Best Regards,
Saurabh Tripathi

How to put the data from one excel sheet in another excel sheet

hi ,
I want put the data from one excel sheet in another excel sheet in seq. order Eg: I have one excel sheet in which i have 3 col. Name , Sno. , Email along with data .I want to put data from this sheet to another excel sheet in the following orders of col. Sno,Name, Email .
While loading data in another sheet , i have to perform validation like char field should n't contain numeric values and vice versa .
Let me know on this soon ..
regards
Prashant

Well, you can issue separate queries with the ordering you need from each tab in the spreadhseet. You can open an ODBC connection from a VBA macro, select a sheet, run a query, select another sheet and run another query. As for the validation, you can do this in Oracle via stored procedures or again in VBA code.

Move metrics data from one EM repository to another

Similar Messages

Maybe you are looking for