Move-out possible even though the customer is still owing

Hi Experts,
Is there a way to control or block move-out if the business partner has open items on the contract account?
Thank you in advance for your help.
Mashudu

Check out thid badi for move out.
ECSBTO02
You can add user defined checks here. I think this will solve your purpose.
Edited by: nivedita_mumbai on Mar 23, 2010 11:33 AM

Similar Messages

Even though the custom greeting is checked , when the phone is called it uses default. Is there a fix?

When my iphone is called and I don't answer the default greeting is used even though I've recorded and checked custom greeting. Any ideas?

It is not that you cannot, there could be an issue with the carrier and a problem with your voicemail settings. If the carrier supports it, it should work, just have them check it.

I exported a video in .MOV format at 1920x1080p 29.97fps and even though the video file still says it has the dimensions of 1920x1080, it plays back in squished, standard definition. Why is it doing that?

I don't understand why the video playback is squishing when the .mov file's dimensions are the right aspect ratio. When I exported with the codec .h264, the video played back the way it was supposed to, with HD/16:9 dimensions. Why is the .mov file not exporting/playing back properly?

Check your Pixel Aspect Settings in Export Panel

Using LabVIEW 6i w Win NT or 95/98 et al: how do you keep a TCP/IP open connection 'open'. The application closes the connection even though the refnum is still active (valid.)

Actually, I open the TCP/IP connection and pass the connection ID through. Each command to/from (cycle) the UUT successfully executes. The refnum for the connection ID is then passed via a shift register in the while loop. i am using the type cast (4X) function to determine the validity of the connection and case statements. If the refnum is non-zero it assumes the connection is still open; if the result is zero, then the connection is closed and a new session opened in that case. What is happening is that the connection has closed and the refnum is still nonzero after the type cast function; su
bsequent commands to the UUT then produce Error 1 for the TCP/IP function (there was no open connection, so there could be no write occurrence.) Obviously, this probably shouldn't be happening. If someone can give me some idea of what I am not doing, or am doing wrong, I sure would appreciate it. In the event that I open and close a connection for each command to(from)(cycle) the UUT everything works. It is extremely slow. The connection should remain open according to all the pointers in the Help and TCP/IP function descriptions. Some of this application is proprietary, so not sure how much of an example I could use to illustrate from a VI, but if this doesn't get any where, I will see what i can do to better illustrate the problem...Thanks. T.Raper

I believe this is a related question. I am developing a LV application the uses TCP/IP to control up to 8 devices-under-test (DUT) at one time. They start and finish testing at arbitrary times relative to each other, and the IP addresses are not known until the DUT arrives. I have some question on what is the best way to manage the TCP/IP handles.
Presently, I have 8 Global IP addresses (one per testing site) that are updated as DUTs arrive and depart, and then whenever I need to communicate with a DUT I use TCP-Open, Write/Read, and TCP-Close. I do this Open/Write/Close each time there is a message to be sent to a DUT. This is basically working, but I notice that the OS (Windows XP or 2000) is running through local TCP/IP ports at a ferocious rate due to the TIME_WAIT behavior of Closed TCP/IP ports (It takes many minutes for a local port to become available again after being closed). If I am not careful, I can quickly exhaust the pool of OS ports by using tight polling loops or other very quick DUT accesses. I have tried not to do that in order to avoid running out of handles, but it is still very wasteful of ports.
While it is working, I feel so dirty burning through these handles like this since they appear to be a precious resource. I really cannot easily merge multiple Read/Writes into a single Open/Close since there are dozens of otherwise unrelated tests that communicate with the DUT as a part of their functionality. The tests are even in different subVI's that are accessed via a vi-server, and only one is loaded at a time.
I thought that a cute idea would be to cache the handles in Globals, and wrap the Open to use the cache if valid, but reading this thread is making me think it is a lot of effort -- I believe I would need to keep a VI running as a "IP Connection Server" at all times and use some form of messaging to get it to Open/Close TCP connections as needed. Since the DUTs arrive at aribitrary times, and with random IP addresses, I cannot establish all the TCP handles ahead of time -- they would need to be created dynamically. It is much more difficult than simply keeping the Connection IDs in global variables -- the VI that Opened them must not be allowed to terminate.
So... I am curious...... is it really that bad to Open/Close as frequently as I am doing it? Does it make me a bad person? I understand it is inefficient use of time, but the simplicity it brings to the structure seems huge, and the DUT is very slow anyway. And if it is bad, are they any more recent thoughts on alternatives? Do VISA handles behave the same way as TCP handles (ie. auto-close themselves upon exit of the VI that Opened them) ?
Message Edited by Mike Seibel on 11-28-2005 07:55 PM
Message Edited by Mike Seibel on 11-28-2005 08:00 PM
Message Edited by Mike Seibel on 11-28-2005 08:01 PM

After Firefox has been on for awhile, the Firefox tabs on the task bar disappear even though the pages are still running. I have to use Ctrl+Tab to fix it

I have started using Firefox recently. My computer is running XP. I notice that whether I have one Firefox window or multiple windows open, after awhile the Firefox tabs on the bottom task bar just disappear.
In order to get them back I have to use Ctrl+Tab to select each window one at a time and then they re-appear again on the task bar. Then after awhile they will disappear again.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

After my hard drive was replaced I installed Mountain Lion. I was unable to use time machine or migration assistant to access files on my external Omega hard drive even though the files are still there? Is there another way?

My hard drive on my iMac was unrepairable so Apple installed a new one for me. When I reconnected my external Iomega USB hard drive I could "see" the original backup figures and the rows of "windows" and back to the original red rows of dates in time machine, but I could only access the recent installation date of my new OS X Mountain Lion. Migration assistant would not work as well only accessing the recent backups. Is there a way to "unlock" the past data so I can retrieve my documents and photos without resorting to purchasing "rescue" software??

I can't see backups for a disk/partition that's no longer connected

ITunes is missing songs even though the file path hasn't changed.

My iTunes library is housed on a separate internal hard drive from my osx disk. I have iTunes set up so that it manages my library and copies files to its folder on my extra drive. Recently, and with increasing frequency, iTunes is displaying songs as missing (grey exclamation point) even though the files are still present in their respective folders. This has happened to about 700 songs already, so it's not exactly feasible for me to go through and re-select the path for each one. Is there a quick solution to this? Many thanks!

Same thing, and it's driving me crazy too! It only happens to my Podcast files though. I haven't done anything special to the file (other than maybe listent to it), but then sometimes the file will get the exclamation point. Then when I click on CTRL-I / Get Info, and it let's me find the file. When I look in the folders, I notice that iTunes has RENAMED the file! What's up?!

My iPhone 4 recently broke and I did not back it up to iCloud. Is it possible to back it up now even though the phone is broken? I also plan on getting iPhone 5, would my information automatically transfer to the new phone?

I had a few questions regarding iCloud. My iPhone 4 recently broke and i didn't realize that I had to manually activate iCloud in order to back up my files, so therefore the information on the iPhone 4 was not backed up. Is it possible to enable iCloud now and back up the information even though the phone is broken?
Also, I was thinking about replacing the broken iPhone 4 with the 5, would my information automtically be transferred to the 5 as long as I log-in with my apple ID?
I would appreciate all the help I can get!!!
Thanks,
Jae

How can I access iCloud through the internet and not through the phone if thats possible? Now that I think about it, I'm not 100% sure that I didn't back it up.
Thanks

Why do some of my playlists gray out even though the music in the list has been downloaded to my iPad ? When they are grey I can't access them.

I have a second gen iPad using the cloud and iTunes Match. On several occasions ( I was not wifi connected ) several of my playlist greyed out not giving me access to them even though the music in these particular playlists have been downloaded to my iPad. Any ideas why this happens

No...should I? I don't have a cluttered desktop at all. Though I guess I do have some folders with a lot (thousands) of PDF's in them. Far less than I did before, though. I moved a bunch of stuff to a portable hard drive last week.

TS1424 trying to rent a movie through itunes on my apple TV and I continue to get a payment verification error even though the payment information is correct and the bank authorizes the purchase?

What is the solution to problem renting movie through itunes on apple TV when payment verification not accepted even though the bank authorizes the payment?

If you are also getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

ICloud keeps asking my password and it always comes out incorrect even though i know i input the right one. When i tried to reset the password by email, nothing was sent to me. Tried it again thru security settings, they asked for my birthdate but st

Please help!!! iCloud keeps asking my password and it always comes out incorrect even though i know i input the right one. When i tried to reset the password by email (many times already), nothing was sent to me. Tried it again thru security settings, they asked for my birthdate but still, it's incorrect! anyone have the same problem?

Hi,
Thank you for visiting Apple Support Communities.
I would recommend reaching out to our Apple ID Account Security team to assist you with this issue.
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Cheers,
Jason H.

Hi- I have a new iPhone 5 and for some reason even though the time is set to EST, I keep getting calendar invitations for GMT, which means I am 5 hours out of whack. What's wrong?

Hi-
I have a new iPhone 5. For some reason, when I received messages they are showing up as the GMT time zone, even though the time on my phone is set to EST.
Anyone know how to change this?
BP5440

Hi-
I have a new iPhone 5. For some reason, when I received messages they are showing up as the GMT time zone, even though the time on my phone is set to EST.
Anyone know how to change this?
BP5440

The built in screen in my Macbook keeps blacking out, even though the computer is on.

Hi
The internal screen on my Macbook keeps blacking out; when this happens the computer is still on - just no screen. This happens when unplugged after a few seconds, and takes a bit longer when plugged in.
If I close the lid and open it again the screen works again for a few seconds before the blackout returns. Obviously this is not the ideal work scenario!
It does not appear that this is a backlight issue (I presume) as I cannot see any image on the screen when this happens from any angle.
If I turn the brightness all the way down and then back up again the screen flicks on for a fraction of a second before anything happens again.
Any ideas what might be causing this? If I can fix it? And/or how much an Apple repair of the problem is likely to cost.
Many thanks for your help!
Martin Faint

Unfortunately it sounds like the logic board... happened on a MB I have at work. That's an Apple Store replacement, and can be expensive if your mac's out of warranty. Free if it's still covered...

Ta OC41 - in PRD modification allowed even though the system is locked

Hello SAP gurus,
I stumbled upon a strange behaviour in our test and productive system.
In the test system transaction OC41 (Change View "Currency Exchange Rates": Overview) shows a popup window saying client xxx has status not modifiable.
So the unlocking with scc4 or se06 poped up in my head.
However when I looked up this example in our productive system, I've found out that I have the possibility for the exchange rates edit even though the system is locked!
Test system is set like this:
SCC4:
Client role: Test
No Change Allowed
No Changes to Repository and cross-client Customizing objs
Protection level 0: No restriction
eCATT and CATT Only Allowed for 'Trusted RFC'
No restrictions set
SE06
Global Setting: Modifiable
Productive system is set like this:
SCC4:
Client role: Productive
No Change Allowed
No Changes to Repository and cross-client Customizing objs
Protection level 0: No restriction
eCATT and CATT Not Allowed
No restrictions set
SE06
Global Setting: Not Modifiable
So how come I can change the exchange rates in productive system and not on the test system?
Thanks for help in advance.
Regards
- Stefan

Hi Venkata,
Congratulations for your first (and well earned) points!
Really if you change the client as productive in scc4, you can also then change the currency rates in oc41.
To all above, thanks for telling me to keep on searching, I've found some info and e.g. a note 356483, that might help me in the future.

HT5622 When setting up an apple ID for a child in family sharing, the verification questions appear in French, even though the iPhone setting is in English...

Possible bug? Setting up apple id for child, under icloud, family sharing, and the 3 questions come up in Frnech, even though the phone is set to English and the remainder of screens have all been in English,
Is this a bug or is there a way to display the questions in English please,
thanks

I agree.
I found this 'bug' out the other day when getting ready for my new iPhone I was setting up my iPad with some new apps too and wanted to work with Find My iPhone.
Here's the deal; my main AppleID is just a simple 'Username' not a '[email protected]' AppleID.
I've had this since the need for AppleIDs were used for these forums and the iTunes Store, AppStore, etc.
So it works fine and well with that stuff but not with find my iphone on my iPad as it wants a full email account, either a '@me.com' or a '[email protected]' AppleID which I did create but I think it was used as Job profile or something other along those lines (NOT used for a MobileMe account or .mac either).
And I only have access to one email now and I dont feel comfortable having multiple email addresses that I dont check or have no use for, call my simple or naive but thats just how it goes.
What I'd like to do is be able to use either AppleID for my Find My iPhone app and everything else.
And I think thats a good point, '@me.com's for all. make it a whole lot easier in my opinion.
merge all the apple accounts you created into a MobileMe, simplifies the situation and makes it easier connect to all Apple Services.
My itunes account, apple.com store account, appstore account, main AppleID for the past couple years it "Maxwell Stanley" but it does NOT work with Find My iPhone. So i created [email protected] (example.com is in place of my true email domain for privacy reasons) and that doesnt work as it statse it Cannot Be used.
My 'Maxwell Stanley" Apple ID's email associated with it was [email protected] i tried changing it to [email protected] but still doesnt recognize that as an AppleID even though its associated with "Maxwell Stanley".
I event ried to use the SAME email that is associated with my 2nd AppleID '[email protected]' with the appleid 'Maxwell Stanley' and no dice.
running out of options it seems.
Any idea on the best solution?
Thank you!

Move-out possible even though the customer is still owing

Similar Messages

Maybe you are looking for