Move QI stock from UD to intransit

Hi experts,
1. Can we configure to move the stock from QI stock to In transit stock instead of UR while we do the Usage Decision ?
2. If we activate the QM view then is it possible to move UR stock to QI stock via Mb1B (w/o inspection lot generation by type 08)
Rgds

Hi
1. Can we configure to move the stock from QI stock to In transit stock instead of UR while we do the Usage Decision ?
During UD its not possible.
You have only limited things available here . But you can put into block stock (or Unrestricted)& from block stock (or Unrestricted) you can move stock to transite.
2. If we activate the QM view then is it possible to move UR stock to QI stock via Mb1B (w/o inspection lot generation by type 08)
No its not possible.
It will throgh erroe of "stock type QI only"
Regards
Sujit

Similar Messages

Move the stock from the raw material storage type to production storage typ

Hi
How to move the stock from the raw material storage type to production storage type.
note that both stoare type be in same storage location only.
pls reply me

Hi Raj,
I WM process, issue or transfer to Production process results in picking of material from the RM storge location / storage type.
If you mean your production stoarge location is same as that of the RM stoage location, it is just a tranfer within a warehous.
which you could do with posting change document. This doesnt reduce your WM stock.
If the production stoarge location is differnt from RM stiage location, then it is picking process from WM and goods issue.
this reduces your WM stock.
hope it helps.
Regards
Harish

How to move material stock from HU to HU

Dear experts,
I have two HUs. Both of them have a material inside.
When I'm trying to create an product wharehouse task in term to move the full content from the HU 1 to the HU 2, the HU 1 will also be packed into the HU 2, even I'm expecting that one empty HU and one HU with materials will be there after this process.
What could be wrong at this process?
BR
Denis

Hi,
well there some HUs in the storage bin (189020 and 189023):
Now I'm trying to create an product WT to move the stock (1 PC) from the HU 189020 into the HU 189023 (with 199 pc). After this movement I'm expecting ant empty HU 189020 and a HU 189023 with 200 PC.
My WH Task:
But instead of one empty HU and a HU with 200, my HU with 1 PC will be packed into other HU:
First of all I get the warning "Could not determine availiable stock"
and than as I said the HU 189020 is inside of 189023:
How can I get an empty 189020 and full (200) 189023 in this case?
Thanks
BR
Denis

Movement of stock from shopfloor to quality inspection stock.

Hi
when i am using automatic goods recipt for my production order order. when i confirm last operation the finished product will be recipted to the unrestricted stock of specefied storage location.
but what i want to do is. I want to move it in to blocked stock .
I have an option in the goods recipt tab of production order.its defaulting as unrestricted use stock.
well i can change it to blocked stock.
how can i default it. instead of changing it in every production order.

Dear Deepu,
1. Now if u want to place the stock from unrestricted to blocked stock use MB1B transaction with 344 mov type
2. suppose if u want for perticular production order stock u want move directly to blocked stock do the following settings in order. Go to order change in CO02 click on Goods receipt tab>in control column> stock type select to blocked stock or quality stock. By default it will be unrestricted.
3. Suppose if u want all the GR to order should got quality stock, in the material master eanble inspection type 04 for that materail and maintain quality plan for tha material in QP01
i hope u r clear
sree

How to Move the stock from restriced stock to unrestricted stock

hi all,
I have issue with blocking and unblocking stocks for sales documents.
Let me explain the issue by taking an example for which i consider the following data
Material : x
available qty :100
Scenario
when we create a quotation for material "X" for 10 qty, then the system will reserve or block that 10 qty against100 qty for that quotation,where the total qty will show as 100qty, but logically only 90 will be available for other users.
When we create sales order with reference to quotation, Suppose if we deliver and PGI the 6 qty out of 10 qty, which was a ordered qty , then the available qty is reduced to 94 qty. but after 90 days of sales order creation or quotation creation. the left over qty with this quotation or sales order have to be pushed back to avialable qty.
Means the 4 qty which is not delivered in this sales cycle and aged 90 days from the creation date has to be pushed back to available qty. then the system will allow other users to use this 4 qty which is blocked for this quotation/sales order .
Please help me with transaction code and steps to fix this issue.
Your inputs will be higly appreciated and valued.
Waiting for all you guys reply.
Thanks,
Mahesh M Basappa
Edited by: Mahesh Basappa on Jul 9, 2008 4:46 PM

Dear Friend,
in 344 movement type for unrestricted to blocked,
movement of unrestricted to restricted
Both are same, shall i use it in MB1B,
Becaues stock has been received through Return sales order,
they want to move this unrestricted to restricted.
Thanks and Best Regards,
Muralidharan S

Error while Releasing the Stock from Quality-CRTD CHCR SPRQ

Hai Experts
While releasing the stock from Quality i got error like function cannot be caried out,
The Material Status CRTD CHCR SPRQ.
Thanks
Rajakarthik

Rajakarthik
It looks like the status you mentioned are of inspection lot.
CRTD mean created status of inspection lot.
CHCR means characterstics required. in your case the the material master inspection view says characterstics required however your inspection plan does not have any cahracterstics.
assign the characterstics to inspection plan & both the status of inspection lot will change. you will be then able to process the inspection lot to move the stock from quality to unrestricted.
Regards
Mahesh

Transfer of Stock from Warehouse to Warehouse

Hi ,
I have the following query.
Warehouse 1 is assigned to Plant 100 and Storage location 10.
But now the client wants to assign Warehouse 2 to Plant 100 and Storage location 10.
As per the requirement I changed the assignment. But now I have come to know that there is stock for certain materials in Warehouse 1. Since the assignment is already done, how can I move the stock from Warehouse 1 to Warehouse 2
Appreciate the help.
Regards
Mohan

"But lets say I assign Warehouse 1 back to Plant 100 and storage location 20"
I presume by storage location 20 you mean 10
Yes I believe this will work.
1) Assign back W/H1 to 100 / 10
2) Check if there is any stock inconsistency. Whatever stock available in W/H-1 for pl / st locn 100 / 10 should match stock at IM level.
3) Create new st locn 20 (in your last message it is 30) under pl 100 and assign W/H-1 to 100 / 20
4) Transfer all stk in W/H-1 from 100 / 10 to 100 / 20. At the end of activity there should be no stk at st locn 10 and no stk in W/H-1 for pl / st locn 100 / 10. All stock in W/H-1 will be for 100 / 20.
5) Now remove assignment of W/H-1 from 100 / 10 and assign W/H-2 to it.
6) Transfer all stk from 100 / 20 to 100 / 10 back.
At the end of activity stock will be in W/H-2 with pl / st locn 100 / 10.
Reg,
Sudhir

Releasing stock from return stock to unrestricted stock

Hi all
Can anybody tell me how to move the stock from return order stock to unrestricted stock so that goods which is been returned from customer can be sold to another customer?
Regards..,
Karthik

Hi,
If u want to post the stock to ur own location for future use u can use
MB1B transaction and with movement type 453 you can post it
hope it will help
regards,
santosh

Error when using 557 movement type to remove stocks from intransit

Dear All,
We have some stocks left in intrasit where we use only inventory management to do this stock transfer(ie. we are not using STO),now we want to remove this stock from intransit. When i tried to use movment type 557 I got an error (Deficit of PL Stock in transit 10 DZ : CHS10088 2KUR 0000000867) with message number M7021. I cross this material with mb52 to find the avalability of this intransit stock and found that it is available at given plant but with out a batch number. When I tried to use this movement type it asks for a batch number so i have given an available batch number. Can you please help me to remove this stock from intransit.
Thanks & Best Regards,
Chameendri

Hi
the movement types 557 ( and 558 ) can only be used to update intra-company
transit stock which is saved in MARC-TRAME. IF you are using purchase
orders cross-company stock transfers, the transit stock is only a virtual transit stock what is calculated
based on the purchase order history. So this issue cannot be addressed
by changing the data in a stock table.
Are you using intra-company STO ?
Please check carefully note 392205 that contains the report ZTRAME
.Please see the following information:
A report attached to the note 392205 tries to explain the stock in
transit using the documents existing in the system. First verify the
current stock in transit situation using the report ZTRAME as per the
note 392205. This program tries to 're-calculate' the stock in transit
based on the material documents and the purchase order history.
Based on the results of the program the movement-types 557 and 558 can
be used to correct the stock in transit (-> add or book out stock in
transit).
I hope this can be of help
BR
Nadia Orlandi

Movement type for transfer of stock from Stock-in-transit to Vendor

Hello,
Is there any movement type for transfer of stock from Stock-in-transit to Vendor.
For internal transfer from Plant to Plant we follow Purchase Requisition -> Stock Transfer Order (PO Modified) -> Delivery (VL04) -> MIGO (Goods Receipt against Delivery) method.
The problem arises when the actual delivery quantity is less then what is entered in the system (due to clerical error). That is, physically less quantity were dispatched and received at the receiving plant. Now the balance quantity is lying as stock-in-transit. To clear it we are receiving the material and using transfer posting for plant to plant transfer. Though physically there is no transfer of goods. Now we do not want to receive the material instead we want it to transfer from stock in transit to the supplying plant. Is it possible ?
Thanks.
Ashish

Hi Ashish,
When You issue the stock, the accounting document is posted . There is no accounting entires when you do Goods receipt at receving plant . In case , we are developing to make it happen , I feel it may have impact on the Material Valuation aspects .
Hence, I feel it is better to adopt any of the following 2 options.
1) Cancellation of the entire delivery and make new delivery or 2) Receive the entire qty at the receiving plant and decide what you want to do with the unavl qty . For example in your case of loss of material due to accident , you can scrap the material in the receving plant itself or return the material back to the sending plant.
Regards
Mani

How to move stock from 916 to Open Area

Dear all
I have stock in Storage Type 916 is 600 KG, in MB52 also to 600 KG
I want to move stock from storage type 916 to Open Area with TCode LT01
I have Message Erorr "E::000 Strg.Type : 916 to is not correct, please changed."
Can you help me please
thanks
imron

916 is the zone for goods issue to deliveries.
so the stock is probably allocated to a delivery.
You can unpick the quantity and move it back to any bin you want by using LT0G transaction.

Movement type to scrap the Restricted stock from warehouse

Hi,
Kindly advise the movement type to scrap the Restricted stock from warehouse.
Thank you.

hi
what do u mean by restricted stock
i thnk it is BLOCKED stock
please clerify that
u cant see any restricted stock in MMBe
it is GR blocked stock and blocked stock or reserved stock
hope it clears
regards
kunal

Move stock from block to inspectin

HI, i have to move stock from block to inspection, i have tried Mov 349 but it 's giving error
Change the inspection stock of material 6520330201524 in QM only Message no. QA495 Diagnosis You want to make a stock posting to/from the inspection stock. This is not allowed for material 6520330201524 because the quality inspection control has been activated by QM. The following cases can occur: The inspection stock should be increased, although an inspection is not foreseen for the current goods movement The inspection stock should be released, although you can only do this using the QM transactions.

Sandeep,
There are many posts here in the forum regarding this topic. I even posted a few myself a couple of years ago. Search them out you'll see there're many ways material can and will be moved into QI, Blocked and Res. intentionally and unintentionally. QM activated negates all the MM and MB Txs. Search them out.
One of several ways this can be done is to:
1. Revise the batch classification/specs. MSC2n
2. Reversing the transaction which put the material in Block, QI, Res. in the first place via MBST if
you've the auth.
3. (Otherwise) Have the creator of the material doc.perform #2 above
Hope it helps.
V.

Movement type 453 (Transfer posting to own stock from returns from customer

Hi all,
I have problem in goods movement type 453 (Transfer posting to own stock from returns from customer)
it picking from from profit center from in material master under sales:general/plant tab but we need picking from based on account assignment group in the material maser sales org.2.
Other movement types are picking from based on account assignment group only . for that what i can do please help me on this.
K.Satish

Hi,
In Co controlling are the automatic account assignment is only the default and it on the Priority.
if you think what is picked up from the mm is wrong.
the best way out will be to go with the substitution rule.
based on the movement type use the rule.
hope this is clear , assign points.
With regards
Krishna

Move Win8.1 from the stock HDD to an SSD

Move Win8.1 from the stock HDD to an SSD
I have a Lenovo K450e ... DeskTop -Model Number:10181
win 8.1... 32 GB RAM
Going to install ...
Kingston SSDNow V300 Series SV300S37A/240G 2.5" 240GB SATA III Internal Solid State Drive (SSD)
And it appears after searching/reading some other post that this May be the only way it can be done >
{ http://forums.lenovo.com/t5/Windows-8-and-8-1/Moving-Windows-8-1-from-HDD-to-SSD/m-p/1843542/highlig... }Move Win 8 to SSD
See above link for other links
"AFAIK, there's no official guide yet on how to move Win8.1 from the stock HDD to an SSD (upgrade) except by using a recovery disc or a recovery drive but for any given model, may it be a laptop or a desktop, your other choices are the following:
Option 1: ( I have Not yet decided on this )
Clone / migrate the OS from the HDD to the SSD
- this is ideal if you don't want to re-install all of the soft-wares
To do this, while booted on the stock HDD, you will need to connect the SSD to the machine (eg. using a 2.5" SATA enclosure) and use a data migration software to clone/migrate the HDD to the SSD. After the process is finished, remove the stock HDD and replace it with the SSD and all should be good.
Other guides:
- OS Migration (using Paragon Backup & Recovery Home)
- Disk Cloning (using Macrium Reflect)
Option 2: [ I will most likly to do this ]
Clean install the OS to the SSD
- this is ideal if you wanted to start fresh
To do this, you will need to:
1. Check this guide on how to obtain a Windows 8.1 ISO (see Option One) {{ Done > DL Win 8.1 burned ISO }}
2. Follow this guide to make a bootable UEFI Win8.1 installer via DVD/USB flashdrive and use it to install Windows (the installation should be able to detect the Windows 8.1 product key in the UEFI firmware that will let you activate Windows).
Is this still the BEST/Only way to move Win8.1 from the stock HDD to an SSD ??
I assume there is NO way to use OneKey Recovery or windows Recovery ( I have both on USB Flash Drives )
Thank You
Purplemtn/Rick

Macrium Reflect, but it has been a while since I cloned a drive.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Move QI stock from UD to intransit

Similar Messages

Maybe you are looking for