Move RE cost from Contract No to Building/Property within RE module instead of FI

Hi, RE experts:
Our company's process moves costs from contract to Buildings/Properties by posting a FI document that will debit to Buildings/Properties and credit to contract nomber.
Is there any way to move the cost from contract to Buildings/Properties within the Real Estate module instead of posting FI documents?
Thanks,
Jenny

Hi Jenny,
As per my understanding through a REFX contract you can make the FI posting entries, at the same time you can define the objects as per your cleint requirement, for those objects you can distibute the charges / conditions what you are paying through a contract.
In your case you want to flow the costs to Building, so try to assign the building in the RECN Contract in Objects Tab, (instead of rental object).
While adding the conditions in the contract ( conditions tab ) try to select the Building and for that you can assign the conditions.
To assign building in contract ( Objects tab ) you may need to do the foloowing configuration as below.
SPRO - Flexible Real Estate Management (RE-FX) --> Contract --> Objects --> Permitted Object Types per Contract Type --> you can select your contract type and assign it to building, so that it will allows you to assign the building in contract.
( Attached screen shot FYI ) .
After assigning in contract - conditions tab - simulation mode - you can see the object cash flow ( against your building & partner related cash flow ).
Thanks & Best Regards,
Subbarao.Narne

Similar Messages

Move costs from WBS to another

Dear Gurus,
I kindly ask you to tell me how can I move some costs (hour of personnel type of cost S43...) from a WBS on a project to a WBS on another project.
I know I can use KB21N: in that way I have to pull out costs from a WBS though the costs center and then do another movement in order to charge the costs on the WBS receiver always thourgh the cost center.
Is there a way to do it directly?
Thanks a lot!
Sara

S43.. is of type indirect activity allocation,cost element category 43, hence can be used only with reference to activity allocation. Please use any other cost element, be it primary or secondary.
Or else you could cancel the original activity allocation through KB67 and renter through KB21N. You may also want to try reposting of activity allocation posting through KB65.
For number range, go to transaction KANK and enter the controlling area. Then click on Change groups icon on top left. Click on binoculars and search for KAMV (Manual Cost Allocation) This is SAP standard and most likely you will find it.

Cost center PR price from contract

Hi
my requirement is to get Purchasing Request ((which is cost center PR acct cat:K)) price, from a relevant valid contract..
even when i assign the contract as a source of supply system doesnt take the PR price from contract?
Any suggestions
Thx in advance

Hi ,
Please take care of the SAp note 311174
Cause and prerequisites
The transfer of data from the source of supply is not planned and only
makes sense in some cases. In particular when you change the source of
supply later the copied data must be changed again. However, at this
time it is no longer clear whether the data was copied from the source
of supply or was entered manually.
For your requirement, I would like to suggest you to use the enhancement
below to implement your own logic in purchase requisition:
LMEKO002
Enhance communication structure KOMP for price determination
MEREQ001
Customer's own data in purchase requisitions
BR
Nadia Orlandi

HT1657 If I rent a movie & decide to buy it later... Will the rental cost be deducted from the movie purchase cost? (E.g. $19.99 - $2.99)

If I rent a movie & decide to buy it later... Will the rental cost be deducted from the movie purchase cost? (E.g. $19.99 - $2.99)

No, you will be charged the full price, there is no discount for having previously rented it.

Settlement of labour cost from sales contract order to CO-PA

Hi Gurus,
Could you please explain how the calculation is made while settling the labour cost from sales cotract order to CO-PA.
Thanks and Regards
RC

Hi,
Basically the labour cost will be contained in a cost element. When you settle the sales order to COPA your settlement profile will contain the PA transfer structure where the cost elements are mapped to the value fields. Accordingly the labour cost will flow into the value field in COPA.
regards
Waman

How to transfer cost from old sales order (cancelled) to new sales order

Hi Gurus
I want to know, how to move cost from one sales order to another sales order.
SD created sales order before 1 month and there was production order behind this. Production was completed and all the cost was moved to sales order and also SD has raised invoice on customer. This transaction was completed.
The above order was rejected by customer due to some changes in the order. SD raised another sales order and production order was created to to additional work. Production transfered above stock (produce before on old production order) to new production order.
My problem is stock is now transfered to new production order but cost is still sitting on old sales order. How do I transfer cost from old sales order to new sales order. SD cancelled old invoice and raised new one with full value (old + new work) on new sales order. Now cost is on old sales order and revenue is on new sales order.
Please help.
Thanks

Hi
I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
Many thanks

Secondary costs from WBS to an AuC

Hi,
1. I have executed Assessment[KSU5] that actually settled costs from secondary cost element[800099] to a WBS element [AAA]
2. Now I am trying to settle costs [which is secondary] from WBS element [AAA] to an AuC using CJ88 and I am getting below error
3. Just for info in allocation structure Z1, I have given settlement cost element for WBS, but still I am getting below error
Any advises/ideas, thanks
Complete allocation structure Z1
Message no. KD503
Diagnosis
During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
Cost element 800099 cannot be assigned to a settlement cost assignment in allocation structure Z1, and therefore it cannot be assigned to a settlement cost element.
Procedure
Possible solutions are as follows:
If the posting under cost element 800099 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
If the posting was made correctly, you can do the following:
a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure.
If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
You can update allocation structure Z1
Regards,
Sri
Edited by: Sridhar Nagavarapu on Jul 4, 2008 12:45 AM
Edited by: Sridhar Nagavarapu on Jul 4, 2008 12:47 AM

Through MM, contract is created (ME31N) whereby the settlement G/L accounts are identified.
The contract then is released through MM with TCode ME21N which prompts Commitment Costs to be entered, after which the Service Entry Sheet SES through TCode ME81L which then automatically updates into the WBS.
Through WBS, CJ88 would be the TCode you would have to use for settlement.
Hope this helps.
Thanks.

Service details are not copying from contract to Maint.Order

Dear Experts,
I was doing a service contract cycle, with the following steps.
1. Created a Service contract, in T. Code ME31K.
2. Given all the details in the Header data of the Contract.
3. Mentioned the, Item category as D (Service), Account Assignment as F (Order), short text, Target Quantity, Material group, Plant and Storage Location in the Item Overview screen.
4. Given the Service Number and Quantity, Gross Price, Cost Center and GL Account.
5. Saved the Contract.
6. After released the Contract in T. Code ME35K.
7. Then created a Maintenance Order through T. Code IW31.
8. In the Operation Overview screen of the Maintenance Order, the control key is given as PM03 and clicked on External button of the Maintenance Order.
9. In the External Processing Operation screen the Contract Number and line Item is mentioned in the Agreement Field.
10. System given a message Data copied from contract.
11. All the data copied excepting the Service details of the Contract.
Here the Service Number and its details which were mentioned in the Service specifications of the Contract are not getting copied from the Contract.
What could be the reason for that? Did I perform the transaction properly?
I have searched the forum earlier for the same but could not get any required information.
Can any one help me out on this??
Thanks and Regards,
Praveen
Edited by: b praveen savan on Jan 31, 2008 2:33 PM

Select the services from the service selection button, then click on current spec, all the services which are under contract will be displayed. select your required services or copy all services.(Click on adopt services)

SES not pulling correct price when adopting from Contract

When doing a service entry sheet against a Limit Purchase Order and
adopting a service master from a contract the price that is being
pulled into the SES appears to be from the last purchase document
instead of the specific contract line item that is being adopted. When
we adopt a service master line item from a contract for say $4.00 we
are expecting $4.00 to be populated on the SES. Instead we are seeing
a price of $3.00 which happens to be the price of the last purchase
order where this service master was referenced. How can we get the
system to pull in the service master from the contract with the
contract pricing?
Steps for Reconstruction
1. Select Contract from which to Adopt Service Master - the user is
doing a service selection and choosing to adopt the pricing from
Contract 5600000119, line item 2.
2. Select Services to Adopt to SES - the user identifies which
Service Masters they wish to adopt on the SES. Note the cost is $4.00
for each of the first two service masters and $6.00 for the last one.
3. Adopted Service Masters come in with incorrect pricing - once
these Service Masters are adopted from the Contract to the SES they
come in with incorrect pricing. $1.75, $3.00 and $1.75 instead of
$4.00, $4.00 and $6.00.

Hi,
Can you confirm the following :
1. What is the price maintained when creating teh service contract.
2. was the service selection when creating services in limit PO done referencing the contract?

VKGRP should copy from contract to sales Order

Hi Guru's
I have a problem related with copy control from contract ot sales order. sales group should copy from contract to sales Order while Sales order reffers to customer Master. In contract sales group comes from Customer Master, after saving the contract if i change the sales Group and create sales order with reference to contract. sales group doesn't get updated from the contract. system refers customer master only.
Any suggestions
thanks,

Hi,
I see that you can address this in following ways.
1. copy control between Sales order - Contract - header level routine. Here you may be able to influence the copy of the customer group details.
2. You can use the user exit which will trigger during Contract creation ( Move field to VBAK) or you can think of using save_prepare user exit.
Thanks & Regards,
CLN

Secondary cost from WBS to AUC

Hi All,
I am facing a problem in posting secondary costs from WBS to AUC.
In Project systems they are considering secondary costs from the activities in the network. i settled the cost from network to WBS. and when i tried to settle From wbs to AUC system is asking for settlement costelement for secondary cost. But the secondary cost should be settled to costcenter but not to AUC.
Please suggest how can we do the settlement from WBS to AUC. How to handle settlement of secondary costs in this scenario.
Any help will be greatly appriciated.
Rgds,
Kumar.

Through MM, contract is created (ME31N) whereby the settlement G/L accounts are identified.
The contract then is released through MM with TCode ME21N which prompts Commitment Costs to be entered, after which the Service Entry Sheet SES through TCode ME81L which then automatically updates into the WBS.
Through WBS, CJ88 would be the TCode you would have to use for settlement.
Hope this helps.
Thanks.

Transfering the Cost from Cost center to PM Work order

Hi all,
We have a scenario.
we are doing material consumption from storage locaiton to a cost center using 201.
when the material requirement comes from work order, we are doing reverse consumption posting from Cost center to storage location using 202. and then issue the material to work order using 261.
Is there any way, that we can move the cost directly from cost center to work order (skipping the storage location in between).
Thanks in advance.
Piyush

Hi,
I guess Initially you are transferring material (201 movement) from Central Warehouse to Cost Center assigned to each department. After that, if you get any reservation from the particular department work order, you are issuing the components to work order by doing 202 & 261 movements.
You can follow either one way.
1. Without doing 201 movement type, once you create a order, based on reservation you can do 261 movement to order from central warehouse directly.
OR
2. Define storage location, do the stock transfer between storage locations. While creating maintenance order, assign the concern storage location in the order. So from that storage location, you can do 261 movement. Also by Material valuation, you can find the value of materials as well.
Regards,
Maheswaran.

Best Way to move MB database from single XCH 2010 to 2013 DAG

Hi,
We are migrating from a Single Exchange 2010 sp3 server to a 2-node exchange 2013 DAG cluster, located in another AD site.
I can move a mailbox from 2010 to 2013 without issue, but the WAN link between 2010 and 2013 is very small.
It will take us too long to move all mailboxes with move-mailbox over the line.
Is there another way to move the mailboxes or Databases more quickly?
I was thinking about copying the DB's to a physical disk from 2010 and then move and mount it on 2013. Is that even possible? I explored the possibility to seed the DB to 2013, but don't have the option to do so. 2010 is installed on 2008R2 standard.
We prefer a short downtime and move over everthing in one go as opposed to having coeexistance for longer period of time to allow the move mailbox over the WAN to complete.
Thanks for any suggestions.

You can't move the databases from Exchange 2010 to Exchange 2013.
I can think of three options.
1. Move the Exchange 2013 server to the same LAN as the Exchange 2010 server, move the mailboxes, then move the server back.
2. Move the Exchange 2010 server to the same LAN as the Exchange 2013 server and move the mailboxes.
3. Install a new Exchange 2010 server on the same LAN as the current Exchange 2010 server, create a DAG, add mailbox database copies on the new Exchange 2010 server, move that server to the same LAN as the Exchange 2013 server, activate the databases
on that LAN, and then move the mailboxes.
3a. A variation of #3 is to build the Exchange 2010 server on the same LAN as the Exchange 2013 server and perform a manual seed of the database copies. This is more trouble than option 3.
Moving Exchange servers between sites is possible but there are other issues you would need to solve. You might be best off just getting a temporary increase in your WAN link capacity for the period of the mailbox move.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Why does the "TAB" key no longer work to move the cursor from field to field with Firefox 17 in MAC OS 10.8?

The "TAB" key will not move the cursor from field to field with Firefox 17 in MAC OS 10.8. You have to use the mouse to click on the new field to move the cursor.

See:
* http://kb.mozillazine.org/accessibility.tabfocus
Note: In OS X (as of 2005-01), if this preference is not explicitly set, the “Full Keyboard Access” setting in System Preferences will be honored. All builds before that date (e.g., Firefox 1.0.x) will ignore that setting.
This pref doesn't exist by default, so if you want to use it instead of the system settings then you need to create a new Integer pref with the name accessibility.tabfocus and set the value to what you want (7 is to tab through all the fields).

[svn:fx-trunk] 9884: Move CalendarIcon.png from sparkskins to framework.

Revision: 9884
Author:   [email protected]
Date:     2009-09-01 12:38:49 -0700 (Tue, 01 Sep 2009)
Log Message:
Move CalendarIcon.png from sparkskins to framework.
QE notes: N/A
Doc notes: N/A
Bugs: SDK-22746
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22746
Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/framework/.actionScriptProperties
    flex/sdk/trunk/frameworks/projects/framework/build.xml
    flex/sdk/trunk/frameworks/projects/sparkskins/build.xml
Added Paths:
    flex/sdk/trunk/frameworks/projects/framework/assets/CalendarIcon.png
Removed Paths:
    flex/sdk/trunk/frameworks/projects/sparkskins/assets/CalendarIcon.png

Move RE cost from Contract No to Building/Property within RE module instead of FI

Similar Messages

Maybe you are looking for