Move regions with marqee tool while automation enabled

hi there, new here to the community, any help is appreciated.
with logic x i noticed that i am not able to select, grab and copy/paste a region while in automation view whith automation enabled for the particular track.
everytime i select a part of the region and then click on the upper part of it does not cut the region but selects it entirely.
it does work however if i disable automation for the particular track or switch out of automation view
since switching out of automation view often enough also means zooming out it's not really a suitable workaround.
with logic 9 i did this all the time and now it ist really disturbing my workflow.
so it seems like a bug.
any help?
am i missing something here?
thanks a lot,
roy
OSX 10.9.5
LOGIC 10.0.7

Moving automation around is very messy.
I would suggest using the feature ""Convert All Track Automation to region Data" (available under the automation menu", when doing big moves, I find it much more reliable. After the move, convert the region data back to automation.
Make you your regions extend over all the automation. You may need to enable hyper draw on audio file for this to work, I've never tried it on audio files.

Similar Messages

Cannot move objects with Selection Tool

Having problems moving a selcected with Selection Tool: the selection does not move.
Also cannot isolate imported picture as it always seems to be selected, even when deselected: Selection Tool always activates first layer even though I'm on another layer
Any new imported burshes i make up are not saved, even though file names shows up: only managed to save one brush
I nearly awlays have to re select stroke width everytime I use selection tools or re open file.
Are the problems due to compatibility issues with Mac OS and Illustrator CS4, as this new version is know to be very buggy in the industry.

bottchichellee,
Illy is Illustrator.
I apologize for the unavailability of the site, owing to some mess by the webhost. This is an extract:
Up to Illustrator 10, almost all the preference settings were included in the AIPrefs/Adobe Illustrator Prefs file, and almost all issues with corrupted settings could be solved by deleting or moving it; in some rare cases, moving or deleting the folder holding the settings was required.
From Illustrator CS on, the preference settings have been spread over a number of files/subfolders so in many cases deleting the AIPrefs/Adobe Illustrator Prefs file is not enough: the easy solution is to move the whole folder rather than trying to figure out which file(s) may be corrupted; just deleting the folder without moving it first has proved fruitless in some cases.
Therefore, the cure all consists of the following steps:
1. Close Illustrator.
2. Make a search including hidden files and folders and including subfolders for the folder holding the preference files; the name of the folder depends on the Illustrator version, and the position of the folder depends on the OS version. There is one folder for each version and for each user so it is important to find the relevant one.
Up to version 10, the name of the folder is Adobe Illustrator [X],
From version CS on, the name of the folder is Adobe Illustrator [X] Settings.
[X] is the version number; up to 10, it is just a number, and above that the Creative Suite version number, CS, CS2, CS3, CS4, and so on, is used (the corresponding standalone versions still have simple numbers, CS is called 11, CS2 is called 12, CS3 is called 13, and CS4 is called 14, but the version numbers with CS are used in the folder name).
3. Either:
a) Create a subfolder and move all the contents into it; or
b) Move the whole folder to a place where you can find it again, such as the Desktop.
With both you may recover the contents of the folder by moving it back if the issue is not solved and get your preference settings back.
a) requires creation of the subfolder, but it makes recovery easier, especially if you create a shortcut to the preference settings folder, and you can skip the search if/when corruption occurs again.
You may delete the folder/contents subsequently.
4. If you have Windows Vista, restart Windows. If not, continue to 5 without delay.
5. Restart Illustrator, and see whether the issue is solved.
If the issue is solved, and you wish to keep as many of your preference settings as possible, you may move the folder back and repeat 3) - 5) for groups/individual files/subfolders until you have found the corrupted one(s). You may also start by only moving the AIPrefs/Adobe Illustrator Prefs file.
You may also see a terse version from ADOBE: Adobe Illustrator CS4 * About preferences.
Scripts for cleaning out everything between uninstallation and reinstallation for versions CS4 and CS3:
CS4 Clean Script, http://www.adobe.com/support/contact/cs4clean.html
CS3 Clean Script
I believe it is possible to get a refund, but there are some options still.

Why can't I select and move guides with selection tools?

I'm using Illustrator CC and I cannot select and move guides with the selection tools. The guides are not locked. I can select the guides in the Layers Panel, but I can only move with the arrow keys. I can also "Release" the guides once they are selected in the Layers Panel, but I still cannot move them with the mouse - only the arrow key.
Summary of Problem:
Guides are not locked.
Some guides can only be moved when they are selected in the Layer Panels and when using the arrow keys
Non-selectable Guides can be "Released" but only altered in color and line weight and still only moved with the arrow keys.
Desired Outcome:
I want to be able to move all guides using the mouse for greater accuracy vs the arrow keys.
Thank you for your help.

Channing, anotherhead,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Move Regions WITH automation data

Here's my predicament, i am trying to cut out and entire verse from the middle of a song. many regions, many tracks, all with automation data. no matter how i do it (whether i go track by track and delete the regions inbetween and move the later regions left, or if i highlight the section i want cut in the green bar at the top and click the split:cut in between markers button, the regions go where i want them to but the automation data does not move with them. is there an easier way to do this rather than having to reposition each automation grouping for each region one at a time?

*Logic Pro>Preferences>Automation,* top item. Sounds like you have it set to "never". Set it to Always or Ask .

Can't move objects with Selection Tool

So, I just installed Illustrator CC, which I now have on a trial license. About an hour ago, illustrator suddenly started refusing to move any objects while I'm in the Selection Tool. I can move the objects only in Free Transform. I use hot keys a lot, so it's really slowing me down. I hit "V" to click on and then move an object, and then it won't move. I get the error sound, but no dialogue box pops up to explain what the error is.
Since I'm getting ready to bite the bullet and start paying a hefty monthly fee for this program when my trial runs out, this is pretty aggravating. Anyone have any ideas what might have cause this?

Charlie,
The following is a general list of things to try in case of serious strangenesses.
You may try the following (you may have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder with Illy closed (more tedious but also more thorough and reversible);
See posts #3 to 7 in this thread about locating the folder in CC,
http://forums.adobe.com/thread/1297845?tstart=0
5) Look through and try out the relevant among the Other options (Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Can't move objects with selection tools?

As of last night, I am able to select objects in my documents but I am unable to move them using the selection tools. I'm having to just scoot things around with the arrow keys. I've already tried restoring my preferences and that hasn't helped.
I'm running OS 10.6.8 and InDesign CS6 8.0.1
Also, for what it's worth, any time I try to use the selection tools in Illustrator, Illustrator crashes but doesn't give me a crash report. This started happening at the same time.
Any ideas?

Well, it was a long shot.
You mentioned replacing the prefs. For ID that's a bit more complicated than some of the other Adobe apps, so I like to verify that you did the whole job. You'll find instructions for doing it manually or using a keybaord shortcut on launch here: Replace Your Preferences
I'm concerned, though that Illustrator also seems to be acting up. Maybe you should replace the mouse driver.

Paint bucket tool after drawing with brush tool

Hi,
I am just wondering if there is anyway to paint using the paint bucket tool properly after drawing something using the brush tool. Although I have no gaps anywhere within the outline , there are times where the paint bucket tool doesn't paint. Another issue I encounter is whenever I try to adjust the shape with the selection tool it either fills a portion of the shape with color and even sometimes makes the shape itself disappear. Is there a way to only select a small portion of the drawing (like the way it is with pencil tool) as the shapes were done using a couple of strokes instead of just one.

Hi,
You can use use paint bucket tool to change the color of lines drawn with brush.And to be sure that there are no gaps select the line with subselection tool because visually you cannot make out as the gaps are defined in pixels.Also you can select parts of fill region with selection tool if the painting with brush is done in shape mode not object drawing mode.Hope this helps.
Thanks,
Sangeeta

Is it possible to automate software instrument parameters in a MIDI region? And alias the region with the automation?

I am trying to track down a detail about how automation works in Logic Pro X.
What I want to know is:
1. Can I draw control-point curves (and smoothly bend them) in a MIDI region to automate a software instrument parameter (and/or smart controls)?
2. Can a region containing this automation be aliased and reused around the timeline (without the automation points being duplicated)?
If this is possible, can someone please post a couple of screenshots - a MIDI region with MIDI Draw automating (for example) the cutoff of an ES M, and screenshots of aliases around the timeline?
thanks!!
H

First, I'd recommend going to Track>other>new with same instrument. This gives you a blank lane to make a region with no notes.
Now, there are two strategies: do some track automation and then convert it to region. You can go into the local view menu and find the option to view MIDI automation and still adjust it. Now you can make aliases of that region. You need to be careful of accidentally writing new track automation, which is easy to do and can happen if you have 'move automation with regions' on for instance. If you make sure and delete all the track auto for this parameter you should be good (the line should be barely visible black, if it is highlighted in color, that means there is at least one active node at the beginning). If the parameter freaks out, instead of following your curve, you can bet there is track automation fighting with the region automation, you might need to tell the automation menu in the track header to show the parameter in question. None of this is a big deal and after doing it once you'll see.
The other strategy is to assign a controller to a parameter (or use the quick MIDI things on certain instruments - you mentioned ES2, which has that) and you can use the hyper draw in the piano roll. The view tip from the first strategy still works so you can edit the automation in the arrange. I prefer the first strategy because the knob you are automating will still move.
If you go to audio tuts plus (something like that) you can find a tut on the first method that's a few years old, and from Logic 9. Basically the same, you just have to look through different menus for everything.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

CS6 stamp tool doesn't work with action / record ( tool record is enabled ) other tools works

At one time tool recording was not possible and if you install Adobe Scriptlistener Plug-in Adobe will disable tool recording its never an option.
I use and record actions all the time and was looking forward to tool recording when Adobe announced it. However I found what they delivered was of very limited value because of the restrictions. I do not care that Adobe disables tool recording on my machine.
The amount of data that gets reordered seems also vary between machines. I found that Action recorded on fast machine are not usable on slow machine. Fast machine recorder too much data.
Documents you use such action on must also have the same size and resolution as the document you recorded the action on. Quite a restriction.
You problem may also be foxed in CC 2014 sett here Photoshop CS6 - Recording the clone tool in an action gives incorrect results on replay.

Scroll down with the mouse while the crop tool window is open

I would like to know if there is a way to scroll down with the mouse while the crop tool window is open, like in Acrobat 5.0. If not with the mouse, is there another shortcut to go through the pages and adjust the size of the crop and see it on different pages? Thanks!

Yes, but I won't see what I'm cropping if I cannot scroll down while the window is open. Thank you for answering anyway!

How can I restore move function and type tool which abruptly became balky with Elements 8 with OS10.10.2?

How can I restore move function and type tool which abruptly became balky with Elements 8 with OS10.10.2?

Follow-up: I'm worried about performing any actions without input, because I don't want to back myself into a corner.
Will resetting Firefox fix the problem (instead of creating a new places database)? https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems
According to this article, a reset will keep browsing history, which should allow me to access my lost tabs IF it will also fix my database problem.

I have several layers for this image: Background, Moon, Tree, Grass and Clouds. When I try to use the Move tool to move the Moon, the tool jumps to the Tree layer. The same thing happens with the other layers as well (except the background layer). How

I have several layers for my image: Background, Moon, Tree, Grass and Clouds. When I try to use the Move tool to move the Moon, the tool jumps to the Tree layer. The same thing happens with the other layers as well (except the background layer). How can I keep the move tool from jumpimg to the Tree layer?

1. Pre-select (highlight) the layer to move in the Layers panel. or-
2. [ALT+Right mouse click] to select the wanted layer in the image window.
and maybe
3. Set the PS option to "Auto-select" a layer with cursor hover. (can be very confusing!)

SCOM Disk space alert automation with Ticketing Tool

Dear Experts,
We are in the process of SCOM Automation with our Ticketing Tool like below incidents:
1, Whenever Disk space alerts are generated in SCOM console with warning and critical criteria then Incident tickets are created automatically .
so, what are the classes or objects needs to be selected only for Disk space alerts for automation with Ticketing tool in SCOM.
Any suggestions would be appreciated..
Regards,
Saravana

The disk space alerts will come from the Logical Disk Free Space monitor which is targetted at the Windows Server 20XX Logical Disk class;
Is this what you need?

Drag Select Inside Points With The Direct Selection Tool While Above An Object?

I'm trying to modify a path in InDesign CS5 (Fig. 2), as it is now I have to select each point individually. Becasue while you're zoomed in (Fig. 1), you can't drag and select the points. When you attempt to do that, you end up dragging the whole image.
Is there a way to drag select inside points with the direct selection tool while your directly above the image with the paths you want to select?
Fig. 1
Fig. 2

FAIL #1:
No. When you copy paste the Cliiping Path [NOT the frame] into Illustrator, then alter the path and paste back into Indesign, it pastes it back as a FRAME, NOT a CLIPPING PATH.
FAIL #2:
Why do people comment on this stuff without first testing what they are suggesting?
What you suggested doesn't work or even make sense.
Apprently in InDesign, you can't have a CLIPPING PATH without an IMAGE there to begin with. When a FRAME OBJECT contains an IMAGE the option to convert the object to an UNNASSIGNED OBJECT is greyed-out, as in UNSELECTABLE, as in NOT POSSIBLE, which is another way of saying IMPOSSIBLE, which in most circles pertains to MAJOR FAILAGE.
When you CUT [hold command then press X] the CLIPPING PATH, from the FRAME/OBJECT you can then unassign the object, but when you paste the CLIPPING PATH back in, it invariably pastes the IMAGE along with the CLIPPING PATH, and once again the UNASSIGNED OBJECT is simply an ordinary frame with an image, and thus NO LONGER AN UNASSIGNED FRAME.
People like you make life harder dude, seriously.
Again, like some of the folks above, you're confusing a FRAME PATH [that you can alter and create with the pen tool as well] with a CLIPPING PATH. They are NOT the same thing.
Know the difference between the two before you feel inclined to respond.
My kingdom for someone out there with some merit and sense of accountability.
It's like, where do you people work? Are you serious? SMH.

Move regions with marqee tool while automation enabled

Similar Messages

Maybe you are looking for