Move stock from block to inspectin

HI, i have to move stock from block to inspection, i have tried Mov 349 but it 's giving error 
Change the inspection stock of material 6520330201524 in QM only Message no. QA495  Diagnosis You want to make a stock posting to/from the inspection stock. This is not allowed for material 6520330201524 because the quality inspection control has been activated by QM.  The following cases can occur:  The inspection stock should be increased, although an inspection is not foreseen for the current goods movement The inspection stock should be released, although  you can only do this using the QM transactions.

Sandeep,
There are many posts here in the forum regarding this topic. I even posted a few myself a couple of years ago. Search them out you'll see there're many ways material can and will be moved into QI, Blocked and Res. intentionally and unintentionally. QM activated negates all the MM and MB Txs. Search them out.
One of several ways this can be done is to:
1. Revise the batch classification/specs. MSC2n
2. Reversing the transaction which put the material in Block, QI, Res. in the first place via MBST if 
you've the auth.
3. (Otherwise) Have the creator of the material doc.perform #2 above 
Hope it helps.
V.  

Similar Messages

  • Stock from block to quality after UD

    Dear Team
    We want to bring back stock from block to quality and UD is done and we can not do it through mb1b and movement type 349 because QM is activated in material, please help?
    Regards
    Ramesh kumar

    Hi Ramesh,
       I suggest you to go through the below documents. It might be helpful to you in solving the issue.
    https://scn.sap.com/docs/DOC-51243
    Reversal of Usage Decision and Stock Posting of Inspection Lot
    Regards
    Kalyan

  • How to move stock from 916 to Open Area

    Dear all
    I have stock in Storage Type 916 is 600 KG, in MB52 also to 600 KG
    I want to move stock from storage type 916 to Open Area with TCode LT01
    I have Message Erorr "E::000 Strg.Type : 916 to  is not correct, please changed."
    Can you help me please
    thanks
    imron

    916 is the zone for goods issue to deliveries.
    so the stock is probably allocated to a delivery.
    You can unpick the quantity and move it back to any bin you want by using LT0G transaction.

  • Process to Move Stock from Unrestricted to Restricted / Quality Stock

    Dear All,
    In one of my plant Quality Management Module is not implemented, but MM module is live and manually using Mov. Type: 321 stock is transferred from Quality to Unrestricted and vice-verse.
    My requirement are as follows:
    1) How can stock status be changed automatically from Unrestricted to Restricted / Quality once its re validity period reaches.
    (For this Inspection Interval of 365 days has been maintained in QM view.)
    2) Inspection Lot is not required.
    3) How can QA07 & QA05 can help in this ?
    Best wishes,
    Vivek Kumar

    Hi,
    1) I am passing Material code, Plant, taking 'Initial run in days=1' and selecting 'Block Batch at Inspection Date',  I am getting msg 'No Entries Found' (In this case Inspection Type '09' was not active)
    2) When I activate Insp. Type '09' the Inspection Lot is getting generated when i perform the above process but I dont required Insp. Lot.
    Suggestion welcome.
    Rgds,
    Vivek

  • Nullify the stock from Blocked Stock.

    Hi,
    I want to nullify the stock for a materials which is lying in blocked stock. The base unit of measurement for that material lying in blocked stock is 0 Ea but the parallel unit of measurement is 3.16 KG.
    Please guide how to nullify the stock for parallel unit of measurement of the material.

    Hi,
    Please check the below things.
    1. Check the material master whetner a conversion is maintained for EA and KG.
    2. You can try post the MI10 document for the blocked stock in the parallel unit.
    3.Or you can transfer post to the unrestricted and post a MI10 document or a scrap moment.
    4. with all the above trials if you find the error message no stock is available , then we can say that stock inconsistancy is there.
    5.Then check MM03 stock MMBE stock and MC.9 stock , if there is a variation then it is a inconsistancy.
    6.Check MB5b FOR the wrong posting.
    If there is a inconsistancy in the tables stock raise a OSS message or apply a sap note.
    Check for note on the service.sap.com
    Regards,

  • Move  stock from Sales order stock unrestricted stock

    HI ,
    I have material in sales order stock. I want to move it to unrestricted stock . How it should be done
    PLease reply .

    use transection code mb1b and  movement type 411 E .
    Regards,
    Dhaval

  • Help on transferring goods from blocked to sales order stock

    Hi Gurus
    i need your help in this urgent production issue here is the details
    our scenario is make to stock, when delivering and shipping against sales order, the user had some issues in t-code VL10H,
    so user only physically finished the delivery and shipped it, but did not execute it in SAP,
    so the user has put the stock in blocked status against these sales orders.
    can you help me in moving this stock from blocked status and issue against the sales orders in SAP so that we can perform delivery in SAP. and close the sales orders
    appreciate if you can explain the details steps and movement types and t-codes
    thanks a lot in advance for your help and replies

    Chakri,
    You need to read the book on R/3 System SAP Strategies guide to MRP Planning and also Product Costing let me know if you need any help on this.
    Saleem
    Edited by: SYED SALEEM on Mar 9, 2008 6:05 PM

  • How to transfer material from blocked stock  to scrap location

    Dear Experts,
        Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
    But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
    Due to this Iu2019m not able to scrap the material from blocked stock.
    Pls advise what to do .Is there some other way to do it??
    Thanks in advance

    Hi,
    You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
    Dhruba
    Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM

  • Returns sale order stock from returns to quality error

    Dear All,
    For FG Material we have activated Inspection Type '06' - Returns from Customer Inspection and Inspection Plan with Usage 'Goods Issue 06' also created.
    We create return sale order material comes in returns and we need Inspection lot with '06'. so in MB1B using mvt type 457 trying to move stocks from returns to quality but system is not allowing to transfer stock it gives error Change Inspection stock in QM only.
    kindly give your suggestion for this error.
    Regards,
    sakthivel

    For FG Material we have activated Inspection Type '06' - Returns from Customer Inspection and Inspection Plan with Usage 'Goods Issue 06' also created.
    SAP has returns set up to create 06 inspection lots. These are not stock relevant. In this case the inventory goes into the return stock category and another move must be done to move the material to unrestricted or blocked as needed it will not allow to move to QI
    If the material should go into QI stock and be under QI control, then config must be changed to use the 05 inspection type instead of 06.
    We create return sale order material comes in returns and we need Inspection lot with '06'. so in MB1B using mvt type 457 trying to move stocks from returns to quality but system is not allowing to transfer stock it gives error Change Inspection stock in QM only.
    In SPRO SD schedule line category for returns(DN) change movement type to 655 and make relevant settings for QM movement types.
    Check below relevant thread for more information
    sales return
    Cheers
    KK

  • RE: Transferring stock from storage type A to storage type B

    what movement can I used in WMS to move stock from storage type A to storage type B for replenishment?
    Bye

    Hi ..
    I think for replenishments standard movement type is 319 .
    You need to assign storage type with this movement type.
    Run Lp22 or Lp24 to generate replenishment .
    If its one time activity you can use LT10 with movement  999 to transfer from one storage type to another.
    Hope it helps
    Jinoy

  • Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !

    Hi Gurus,
    I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
    My Query is:
    1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
    2. What does it mean when we say Material to Material transfer ?
    Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
    Many Thanks,
    Madan

    Hi,
    Please help me with pointers on the mapping parameters for this BAPI.
    Here are the details which I am using, but gettin error message -
    T ID                   NUM MESSAGE
    E /CWM/MM              001 Transfer the parallel entry quantity/entry unit of measure
    I have filled below fields:
    GOODSMVT_HEADER
           PSTNG_DATE                   11/25/2009
           DOC_DATE                       11/25/2009
           PR_UNAME                        MyName
           HEADER_TXT                    TEST
    GM
    04  (Transfer Posting)
    GOODSMVT_ITEM
               MATERIAL                       100001374
               PLANT                          1AAE
               STGE_LOC                       B100
               BATCH                          0111331309
               MOVE_TYPE                      343
               ENTRY_QNT                                10.000
               ENTRY_UOM                      EA
               ENTRY_UOM_ISO                  EA
               MOVE_MAT                       100001374
               MOVE_PLANT                     1AAE
               MOVE_STLOC                     B100
               MOVE_BATCH                     0111331309
    Need your help to resolve this.
    Many Thanks,
    Madan

  • Report for material moved from blocked stock to unrestricted stock

    Hi,
    Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
    Regards,
    Pratap

    It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
    Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

  • Transfer of stock from Returns stock type to Unrestricted/Blocked

    Hi,Friends
    How to transfer of stock from Returns stock type to Unrestricted/Blocked
    what movement type will trigger by transfering this stock,
    Thanks & Regards
    Krishna

    Hi,
    use MB1B Mvt Type 453 returns to unrestricted
    Unrestriced to Blocked stock use - 344
    Thanks & Regards,
    kiran

  • Movement type to scrap the Restricted stock from warehouse

    Hi,
    Kindly advise the movement type to scrap the Restricted stock from warehouse.
    Thank you.

    hi
    what do u mean by restricted stock
    i thnk it is BLOCKED stock
    please clerify that
    u cant see any restricted stock in MMBe
    it is GR blocked stock and blocked stock or reserved stock
    hope it clears
    regards
    kunal

  • Move QI stock from UD to intransit

    Hi experts,
    1. Can we configure to move the stock from QI stock to In transit stock instead of UR while we do the Usage Decision ?
    2. If we activate the QM view then is it possible to move UR stock to QI stock via Mb1B (w/o inspection lot generation by type 08)
    Rgds

    Hi
    1. Can we configure to move the stock from QI stock to In transit stock instead of UR while we do the Usage Decision ?
    During UD its not possible.
    You have only limited things available here . But you can put into block stock (or Unrestricted)& from block stock  (or Unrestricted) you can move stock to transite.
    2. If we activate the QM view then is it possible to move UR stock to QI stock via Mb1B (w/o inspection lot generation by type 08)
    No its not possible.
    It will throgh erroe of "stock type QI only"
    Regards
    Sujit

Maybe you are looking for

  • Exchange Server 2010 SP3 test environment - email flow to/from internet

    Today I set up test environment for Exchange Server 2010 SP3 - domain controller running Windows Server 2008 R2 SP1, Exchange Server 2010 SP3 on Windows Server 2008 R2 SP1 and client computer running Windows 7 Pro SP1 x64 with Outlook Pro 2010 x64. T

  • Webi Report User selection screen

    I need to create a selection screen with check box and radio button like custom selection screen. Whenever the report run, user must fill the information in selection screen and then report should show. How can i get custom selection screen?

  • NOKIA MAIL LOGGING IN ERROR(LUMIA 530DS)

    can't log into nokiamail.at first it took too long to logging in.then it appears attention required.i checked it.i tap on the mail account and in next page it said incorrect password.i put the right one which i allready did in first stage.sadly its u

  • Spotify, Windows 8.1 - Suddenly no sound and spotify is not useable.

    Hello So I just recently reinstalled Windows 8.1 on my computer, because I had some problems with it. Everything works fine now, except Spotify. I didn't use to have any problems with it and it played tracks and albums smooth. Now suddenly when I ins

  • Help request for Oracle DB Performance tuning

    I need some help on Oracle performance tuning. My environment is VB 6 frontend & Oracle 8 in backend. The problem I am facing is particularly in muli-user environment. Some query which takes 20 seconds to when there is only one user working in the ne