Move to functionality is erratic
The Move To function is kind of erratic. When i move the mouse over the list and select inbox another list pops up, and when I try to move into that list it does not stay visible, it disappears quick
This works for me. I think you accidentally move out of the box with the names of the folders. If you are sure you stay between the lines, maybe you have an add-on that causes this. Try running Thunderbird in safe-mode and see if Move to still doesn't work right for your inbox...
Similar Messages
-
InDesign copy, cut or move box functions don't work
I am having trouble with the copy, cut and move box commands. When a text or shape box is active, I cannot move it with the cursor. It will move if I use the arrow keys, but the box behaves like it were "locked." I deleted my preferences, but that makes no difference. This problem persists whether I am in an existing ID document, or if I start a new one.
The copy and cut functions don't work either.Of course replacing your prefs is a possibility, and has nothing to do with the need to force quit (but will probably cure it). Replacing prefs is done with the application closed, either using the keyboard combination as you relaunch, or by deleting or renaming the specified files, both ow hich are desribed inthe link in the previous post.
You posted that you had already deleted the prefs, I believe, but many users are not aware they can use the keyboard or that there are two files involved for ID and are not successful, and thus think repacing the the prefs is not going to solve the problem. Hence my previous question. Did you use one of the methods in the link? -
I-Movie: Clip-Functions don't work
I'm working on I-Movie and i'm trying since three days to edit my videos with the functions under the menue point "Clip", but this isn't just possible. All the functions under "Clip" are inactive (shown in a light grey) and i can't use any of them.
I've already unlocked all the clips i've imported (the format of the is .avi), i've marked them to edit them, but there seems no working solution.
Any suggestions to solve the problem?
ThanksAdd video to your project
1. Open an existing project by double-clicking it (don’t click the project’s name directly) in the Project
Library.
If you don’t see the Project Library, click the Project Library button
You select an Event by clicking its name once. The Event footage appears in the Event browser to the
right of the Event Library.
2. In the Event Library, select an Event whose footage you want to add to your project.
If you don’t see the Event Library, click the Event Library button, which is typically located in the lowerleft
corner of the iMovie window.
3. In the Event browser, select a range of video frames or an entire video clip.
To select an entire video clip, hold down the Shift key and click the clip once, so that it’s outlined in
yellow.
To select a portion of a clip (called a frame range), drag across any clip while you hold down the button
on your mouse or trackpad. Selected frames are outlined in yellow.
4. Drag your video selection to the Project browser.
You drag by holding down the button on your mouse or trackpad as you move the selected clip to the
Project browser. You can drag it anywhere: to the beginning or end of the project, or between clips
you’ve already added. A vertical green line, along with a green Add symbol, appears anywhere you
can place the clip.
Once video is added to the Project Browser window, it may just be the case that the Clip Menu becomes available, and everything will not be grayed out but working as you expect it to. -
A few days ago I lost the ability to open .doc or .docx files in Pages '09 version 4.3.
Today I find that I can not paste or move text within Pages.
I updated everything yesterday and still no luck.
Help....A Google search using the terms <document "could not be opened" iwork"> turns up two possible solutions:
Pages '09 refuses to create/open existing doc after Lion upgrade
Re: The document “navidad.numbers” could not be opened.
The first discussion's solution is to delete/reinstall/update iWork. The second is to edit the underlying code within the document and remove any Unicode characters.
I recommend you go with solution no. 1. Use Yvan Koenig's script to delete iWork completely (see below), then reinstall and update iWork before attempting to open a Word document. Then let us know how you went.
Go to https://public.me.com/koenigyvan
Choose For iWork > iWork '09 > uninstall iWork '09.zip
Download Uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button -
Loaded movie loses functionality
I have a movie called pageturn.swf and is loaded in this
order....................First my main timeline is loaded , which
is an animation.....at the end of the animation, my first movie is
loaded with "loadMovie("movie2.swf"); at the end of this movie my
third movie is loaded. ....In my third movie I have three
navigation points and on one point when a button is click it takes
the user to the the frame label and loads my page turn.swf
movie........so.......I've gone from
Main timeline
->movie1->movie2->movie3->pageturn.swf.
I have a btn that resides in pageturn.swf that takes the
navigation back to movie 3 or the "start" frame label. The
pageturn.swf works the first time BUT pageturn.swf doesnt work when
I try and open it again. It works the first time, then just doesnt
do anything, sometimes when I test export, sometimes it will work
but just not all the time like I would want it. I tried placing the
unloadmovie at the end of the page turn exit but it does not fix
the problem. below is what I have when it exits
this.unloadMovie();
_level0.lines.holder.holder2.gotoAndPlay("play");
Any ideas?I think the problem is the use of attachSound in an
externally loaded movie.
attachSound (Sound.attachSound method)
public attachSound(id:String) : Void
Attaches the sound specified in the id parameter to the
specified Sound
object. The sound must be in the library of the current SWF
file and
specified for export in the Linkage Properties dialog box.
You must call
Sound.start() to start playing the sound.
To make sure that the sound can be controlled from any scene
in the SWF
file, place the sound on the main Timeline of the SWF file.
Lon Hosford
www.lonhosford.com
Flash, Actionscript and Flash Media Server examples:
http://flashexamples.hosfordusa.com
May many happy bits flow your way!
"devilmuzik" <[email protected]> wrote in message
news:e83i28$7s4$[email protected]..
> Hi Jan-Paul...here it is...
> _______begin code_______
> on (press) {
> stopAllSounds();
> mySound = new Sound();
> mySound.attachSound("pl");
> mySound.setVolume(100);
> mySound.start();
> }
> _______end code_______
> I've tried declaring the sound var everywhere...the
loader clip's main
> timeline...I even tried declaring it as a
_global...still no joy...
> It is clear that this is something to do with how I'm
handling the Sound
> object, but still don't get why
myLoader.content._lockroot=true didnt
> work...
> Remember...the player works when called by itself...it
just fails to play
> in
> the loader...
> Your continues help is much appreciated...
>
> -
E5 - Move email function disappeared
I got a new E5 for business about 3 weeks ago. Managed to setup okay to access corporate email account using Mail For Exchange. All worked well until about a week ago, when I noticed that the "Move" email feature had gone. I had been reading emails and then filing them, and was really pleased that all my email folders from my laptop were available for filing on the phone.
The only thing I can remember that has changed is a software upgrade about a week ago, but stupidly cannot remember what the upgrade was ! It was after logging on via wifi for the first time, and I simply agreed and left it to get on with it. Not sure if that is the cause, but timing is similar.
Anyone any ideas - I can't find similar reports online and my IT dept are at a loss (and tired of seeing me I suspect !). Thanks.I found that I've got the same problem on my E72 since the upgrade. It looks like it has been taken off. A colleague of mine also has lost it (E5). Maybe Nokia could put it back in the next update. This is only Mail for Exchange, and that other e-mail accounts, it still exists.
-
I've just written a couple of methods, which tell an object to move directly towards an x,y position at a given speed. Just wanted to know if this would be deemed a good way to go about it or if I'm missing some obvious quick solution. Here's what I've written:
public void moveToward( float x, float y, float s, long t) {
// Setup variables
float speed = s;
float xVector = x-getXcoord();
float yVector = y-getYcoord();
// Decide required velocity for x and y to follow vector at s
float xRelative = getRelativeVelocity( xVector, yVector );
float yRelative = getRelativeVelocity( yVector, xVector );
// Move a step closer.
move( xRelative, yRelative, speed, t );
public void move( float xR, float yR, float s, long t ) {
/* Move speed * a modifier in each direction, one step. */
float xMoved = xR * s * ((float) t / 1000);
float yMoved = yR * s * ((float) t / 1000);
setXcoord( getXcoord() + xMoved );
setYcoord( getYcoord() + yMoved );
float getRelativeVelocity( float m, float n ) {
/* Returns 1 if m >= n, otherwise returns n/m */
if( m>=n ){ return (float) 1;}
else {return m / n;}
} Inputs are x,y positions of destination, desired speed in pixels/sec and milliseconds since last update. It still needs stopping criteria and a statement to snap it to the destination when it can get there in one step, but they'll be straightforward additions.For better help sooner, post an SSCCE *(<- link)* rather than code snippets.
-
Myst-End of Ages mouse movement & screen choppy and erratic
Ubisoft says its an Apple problem - Apple says its a Ubisolf problem. The problem started half way
through the game and I would like to finish it, but I can't the way it is. Can this be fixed???Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
How much RAM do you have installed?
Are you using the Mighty Mouse? Wired?
System requirements for the game? Asking because I noted in your system info you are still using OS 10.4.8 instead of the latest update OS 10.4.11.
Have you tried repairing permissions & restarting? -
Can we move SAP R/3 standard Function Groups, SAP Tables to BW
Dear Forum,
We are in a pilot process of migrating SAP R/3 Custom development objects to our BW client and we have a few questions that we would like to know if possible.
We are currently in the To Be Blueprint Phase of migrating SAP 45B to ERP2005 as a Ramp-Up customer and we need to determine as soon as possible the feasibility of moving one particular Custom application from our SAP R/3 environment to BW.
This application primarily performs computational processing and does reporting of the results at the
conclusion
We have selected one Custom R/3 ABAP program to do a pilot to determine the feasibility of migrating it to the BW platform. This Custom program utilizes objects from standard SAP Function Groups which are <b>non existent</b> in BW. In this particular case SAP Function groups <b>KMS0</b> (Cost Center Selection) and <b>KAB2</b> (CO Reporting: General).
<b>Questions:</b>
Are we allowed to move these <b>2 standard SAP Function Groups to BW</b> ?
Would it alter the BW environment integrity as intended and designed by SAP?
If we move the Function Group KMS0 and KAB2 will SAP support our BW environment if we decide to move them?
Would it be considered a SAP Best Practice to move standard SAP R/3
objects to BW?
Thank you in advance for your help,
Paulo Silveira
[email protected]Hi Roberto,
First many thanks for such a quick response and as you mentioned it would be almost necessary to port over a few objects from SAP to make it work.
Would be safe to assume that we should not try to import standard SAP objects to a BW installation in order to make provide the same functionality as R/3 System ?
Thank you in advance for your help,
Paulo Silveira -
Can we move SAP standard Function Group and Table defintion to BW
Dear Forum,
We are in a pilot process of migrating SAP R/3 Custom development objects to our BW client and we have a few questions that we would like to know if possible.
We are currently in the To Be Blueprint Phase of migrating SAP 45B to ERP2005 as a Ramp-Up customer and we need to determine as soon as possible the feasibility of moving one particular Custom application
from our SAP R/3 environment to BW. This application primarily performs computational processing and does reporting of the results at the
conclusion
We have selected one Custom R/3 ABAP program to do a pilot to determine the feasibility of migrating it to the BW platform. This Custom program utilizes objects from standard SAP Function Groups which are non existent in BW. In this particular case Function groups KMS0
(Cost Center Selection) and KAB2 (CO Reporting: General).
Questions:
Are we allowed to move these 2 standard SAP Function Groups to BW ? Would it alter the BW environment integrity as intended and designed by SAP?
If we move the Function Group KMS0 and KAB2 will
SAP support our BW environment if we decide to move them?
Would it be considered a SAP Best Practice to move standard SAP R/3
objects to BW?
Thank you in advance for your help,
Paulo Silveira
[email protected]Hi Paulo and welcome on board !
Please don't post twice the same question...(look in the other one...)
..and don't forget to rewards the answers...it's THE way to say thanks here !
Anyway, I'd suggest to close this thread to avoid to receive answers in both threads...
Cheers,
Roberto -
Rollover event not playing movie in buttons/gotoandPlay function not playing frames
This web site has 7 buttons (each button plays a different movie/each movie(.flv) has a stop action at frame 1). The first 3 buttons (button set 1) exist on the timeline from frames 1 to 28. Frame 29 has a blank key frame for the 1st 3 buttons. There is action script for the 3 buttons in frame 1. Next 4 buttons (button set 2) exist on the timeline from frame 30 to 90 as well action script.
The stop actions are at frames 29,50,69,90. Labels are at frames 1,30,51,70. When testing the movie button set 1 functions as expected (the rollover event for each button plays its movie and selecting the button plays the correct frame) . Button set 2 is not working (the rollover event for each button is not playing the movie and selecting the button does not play the frame)
Using cs4, as3
This is my 1st attempt at an interactive project like this and am not sure how to make all the pieces work together. My action script is included below. I would appreciate a breakdown of why the movies are not playing as well as the gotoandPlay function for button set 2 and how can this be fixed. No errors are reported when I test the movie the buttons for button set 2 just do not function.
Thanks in advance.
AS frame1:
import caurina.transitions.*;
import caurina.transitions.properties.*;
DisplayShortcuts.init();
conbut.addEventListener(MouseEvent.ROLL_OVER, conbut_ROLLOVER);
function conbut_ROLLOVER(e:MouseEvent):void
Tweener.addTween(contact_1, {_frame:10, time:0.2, transition:"linear"});
var over:Over = new Over();
over.play();
conbut.addEventListener(MouseEvent.ROLL_OUT, conbut_ROLLOUT);
function conbut_ROLLOUT(e:MouseEvent):void
Tweener.addTween(contact_1, {_frame:0, time:0.5, transition:"linear"});
newxbut.addEventListener(MouseEvent.ROLL_OVER, newxbut_ROLLOVER);
function newxbut_ROLLOVER(e:MouseEvent):void
Tweener.addTween(newsx, {_frame:10, time:0.2, transition:"linear"});
var over:Over = new Over();
over.play();
newxbut.addEventListener(MouseEvent.ROLL_OUT, newxbut_ROLLOUT);
function newxbut_ROLLOUT(e:MouseEvent):void
Tweener.addTween(newsx, {_frame:0, time:0.5, transition:"linear"});
gall.addEventListener(MouseEvent.ROLL_OVER, gall_ROLLOVER);
function gall_ROLLOVER(e:MouseEvent):void
Tweener.addTween(gal, {_frame:10, time:0.2, transition:"linear"});
var over:Over = new Over();
over.play();
gall.addEventListener(MouseEvent.ROLL_OUT, gall_ROLLOUT);
function gall_ROLLOUT(e:MouseEvent):void
Tweener.addTween(gal, {_frame:0, time:0.5, transition:"linear"});
function spineasel_top_mc() {
easel_top_mc.play();
newxbut.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_15);
function fl_ClickToGoToAndPlayFromFrame_15(event:MouseEvent):void
gotoAndPlay("news..");
gall.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_9);
function fl_ClickToGoToAndPlayFromFrame_9(event:MouseEvent):void
gotoAndPlay("gallery..");
conbut.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_10);
function fl_ClickToGoToAndPlayFromFrame_10(event:MouseEvent):void
gotoAndPlay("contact..");
AS frame30:
import caurina.transitions.*;
import caurina.transitions.properties.*;
DisplayShortcuts.init();
inv_gallery_btn.addEventListener(MouseEvent.ROLL_OVER, inv_gallery_btn_ROLLOVER);
function inv_gallery_btn_ROLLOVER(e:MouseEvent):void
Tweener.addTween(gallery1a, {_frame:16, time:0.2, transition:"linear"});
inv_gallery_btn.addEventListener(MouseEvent.ROLL_OUT, inv_gallery_btn_ROLLOUT);
function inv_gallery_btn_ROLLOUT(e:MouseEvent):void
Tweener.addTween(gallery1a, {_frame:0, time:0.5, transition:"linear"});
home_1.addEventListener(MouseEvent.ROLL_OVER, home_1_ROLLOVER);
function home_1_ROLLOVER(e:MouseEvent):void
Tweener.addTween(home, {_frame:16, time:0.2, transition:"linear"});
home_1.addEventListener(MouseEvent.ROLL_OUT, home_1_ROLLOUT);
function home_1_ROLLOUT(e:MouseEvent):void
Tweener.addTween(home, {_frame:0, time:0.5, transition:"linear"});
inv_news_btn.addEventListener(MouseEvent.ROLL_OVER, inv_news_btn_ROLLOVER);
function inv_news_btn_ROLLOVER(e:MouseEvent):void
Tweener.addTween(news_1a, {_frame:16, time:0.2, transition:"linear"});
inv_news_btn.addEventListener(MouseEvent.ROLL_OUT, inv_news_btn_ROLLOUT);
function inv_news_btn_ROLLOUT(e:MouseEvent):void
Tweener.addTween(news_1a, {_frame:0, time:0.5, transition:"linear"});
contact_1a_inv.addEventListener(MouseEvent.ROLL_OVER, contact_1a_inv_ROLLOVER);
function contact_1a_inv_ROLLOVER(e:MouseEvent):void
Tweener.addTween(contact1, {_frame:16, time:0.2, transition:"linear"});
contact_1a_inv.addEventListener(MouseEvent.ROLL_OUT, contact_1a_inv_ROLLOUT);
function contact_1a_inv_ROLLOUT(e:MouseEvent):void
Tweener.addTween(contact1, {_frame:0, time:0.5, transition:"linear"});
inv_news_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_20);
function fl_ClickToGoToAndPlayFromFrame_20(event:MouseEvent):void
gotoAndPlay("news..");
inv_gallery_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_21);
function fl_ClickToGoToAndPlayFromFrame_21(event:MouseEvent):void
gotoAndPlay("gallery..");
contact_1a_inv.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_22);
function fl_ClickToGoToAndPlayFromFrame_22(event:MouseEvent):void
gotoAndPlay("contact..");
home_1.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_23);
function fl_ClickToGoToAndPlayFromFrame_23(event:MouseEvent):void
gotoAndPlay("home..");Steps tried so far to troubleshoot functionality of buttons in 2nd set:
- Recreated the .flvs for all buttons in 2nd set. Re-imported to flash and swapped with existing video
- Thru event generator generated rollover and rollout code for each button
- Commented out the stop action for each video (stop actions remained active on main timeline on stage)
- Retested movie – video continuously looped on all buttons in 2nd set, GoToAndPlay function still not working
- In addition to the commented out stop actions for each video also commented out stop actions on main timeline for buttons in 2nd set
- Retested movie – Rollover functionality which causes the video to play works; GoToAndPlay function plays the correct frame but continues to play through to end of timeline -
I want to implement thems functionality in my swing application
Hi All...
I want to implement the themes object in my swing application,How ,where to start and move that functionality,If anybody use this functionality in your program experience can u share with me.
Than to Advance
ARjun...Hi Kuldeep Chitrakar
I can do that in web intelligence. dont want that
I am replicating some of the sample report of SQL Servers in BusinessObjects XI R3.1.
One of the SQL Sever's report is of product catalogue type that gives complete information like name, category, description along with the products image etc... for each of the products.
I am trying to replicate the above said SQL Server report in Business objects XI R3.1. I am facing problem in bringing the image in to my BO report. The image resides in a table and its datatype is of varbinary(max). I don't know the exact matching while creating an object in the uiverse designer.
Here is the url link http://errorsbusinessobjectsxir3.blogspot.com/2010/10/business-objects-image-errors.html
Regards
Prasad -
How to replicate the sum by function in RPD.
Hi All,
Below is the function being used in report.
CASE WHEN sum ("product sales information". "Sales amount" by "master calendar". "Years description") is NULL THEN 0 WHEN sum ("product sales information". "Sales amount" by "master calendar". "Date of description ") <= 0 THEN 0 ELSE CASE WHEN sum (" product sales information "." sales amount "by" product master "." product name "," master calendar "." years description ") is NULL THEN 0 ELSE 100 * sum ("product sales information". "sales amount" by "product master". "product name", "master calendar". "years description") / sum ("product sales information". "sales amount "by" master calendar "." years description ") END END
I am trying to create aggregate measure in RPD and use that in report. The above function works fine when I use that in report but when I tried to create a measure in RPD its giving syntax error.
Can anyone please help me to create the measure in RPD? Is there any change of syntax for sum by function if we use in RPD?
Thanks
KrishnaHI Srini
Thanks for your reply. Is there any other way I can replicate this in RPD. Customer is using this function in many places in a dashboard so due to this performance is very slow.
I am trying to move these functions to RPD.
Thanks
Krishna -
Is there a way to move files from one folder to another without copying and pasting and then going back to delete the original? The cut and paste function is not available and there's no "move to" function. Am I missing something? It was so easy with Windows.
Drag the files, or press Option when pasting them; this accesses the Move To function.
(124070) -
ECC 6.0 Questions on New Business Partner Standard Address Functionality.
Hello.
We are upgrading our client from 4.72 to ECC6.0 and in the UAT testing phase.
Where before in 4.72 the Standard Mailing address was determined by a simple radio button, it appears that they have gone to a time dependent type of format which is causing issues with our client.
I have a few questions surrounding this piece.
1) Enabling 'Address Usage' : On the Address Overview Tab in FPP2/FPP3, How can we enable the 'Address Usage' box that is under the 'Address Overview' Box?
2) Determining Standard Address on Address Overview: For accounts brought over in the upgrade, the Valid From/Valid To Dates on the Address Overview are defaulted 01/01/0001 to 12/31/9999. How can the user now tell which is the default address without having to go to the Address Tab?
3) Reversing Standard Address Change: Our client has a business scenario that occurs often in which the a customer may call in to change their Standard mailing address. Then the customer calls back at a later time and decides they wanted to reverse back to the original address. We have gone through this scenario using the Move button to move in the new address, which changes the standard address, then subsequently use the Move > Reverse functionality. It appears to change the on the Address overview tab but does not save on the Address Tab.
4) Effective Date Change: In 4.72 the client had the ability to change any characteristic of the BP on a certain day. For example wanting to change the Standard address, Name, Phone on a day in the future. So they would pick that day in the future, and the planned change would occur on that day. We cannot find that functionality in the current ECC 6.0.
Any guidance would greatly be appreciated! Thanks in advance!
Regards,
EricHi Nick,
Did you get the answer? I'm lookinf for the same information about profiles.
Thanks!!
Maybe you are looking for
-
T-SQL - PL/SQL conversion: insert into ... select problem
Hi! If I have an insert into ... select statement in T-SQL without a 'from' clause: bq. insert into sometable (foo, bar) \\ select 5, case when @bar=5 then 4 else 3 end its translation is: bq. INSERT INTO sometable \\ ( foo, bar ) \\ VALUES ( 5, CASE
-
So some of my purchased songs from iTunes are not syncing to my iPhone. Is there a setting or format issue? If so, how do I change it? The songs show up on my iPhone as if they synced, but do not play. There is an icon to the right saying it need
-
I upgraded to iOS7 without incident and all has been functioning fine. However, today I am unable to access anything that requires connection. Wifi is strong, and working fine on other devices. Any suggestions?
-
3g launch in UK in shambles due to O2 (in)activation
has anyone been able to connect to O2 network since yesterday, O2 has led this 3G launch in real shambles. I got a phone yesterday still waiting for network connection.
-
Plse HELP permissions messed up
I did something to my computer and now I have no access to the extra hard drives due to permissions PLEASE help me someone