Move to next record
move to next record wont work with tom-muck horizontal repeat
region anyone got an alternative or know why its throwing back
errors
i got it workin sorry for wasting your time
Similar Messages
-
See my problem no master record move to next record
hi master
sir
i have master detail block master table have all data but detail no data i need feed data in detail then i goto in detail block write value and press F10 for save
for new record in detail
in detail blick post-block or post_record or post_insert event i write this code
go_block('masterblock');
next_record;
go_item('detailblock.item');
but not responses no master block move to next record still and my curser sitll in last postion
sir how i move master record after save the detail record and jump to detail block for new record
please give me idea or code
thanking you
aamirthank for reply
sir your help very usefull for my but when i press F10 then system show massage do you want to save change the record
sir how i avoid that window and directly move to next record
please give me idea
thanking you
aamir -
My code not give me result and error for move to next record please see
hi master
sir i import this file also
import javax.faces.event.ValueChangeEvent;
then my error remove
i am use this code in button event
getMfatableDataProvider().cursorNext();
form1.discardSubmittedValues("virtualForm1");
and my textField is bounded with data provider table field
please give me idea how i show next rocord in page when user press button
thank's
aamirthank for reply
sir your help very usefull for my but when i press F10 then system show massage do you want to save change the record
sir how i avoid that window and directly move to next record
please give me idea
thanking you
aamir -
Move to next record / wildcard search
Hi
Hope you can understand this explanation..
I have searchable database for Holiday & Residential
property here
http://www.roomtobreathesl.com
(search facility in the navigation menu)
The results page for this search works fine for when you
specify a certain
area, certain amount of beds etc as it only shows a small
amount of
properties.
However when you do a search for any area / any amount of
rooms / any type,
the query brings up over 40 results, so a move to next record
is used. This
is where the problem lies. You cannot move to next record as
the 'Next
record' link is looking for another wildcard search (see
status bar).
Any ideas how to remedy this?
Thanks for any help
Garyoops!
Sorry sent you the previous version that's online.
I also tried doing a search and replace and changing all
'Request.Form' to
'Request'
Still didn't work.
This is how it was when it wasn't working.
<%@LANGUAGE="VBSCRIPT"%>
<!--#include file="Connections/YotShop6.asp" -->
<%
Dim rsResults__MMColParam
rsResults__MMColParam = "1"
If (Request("yscon") <> "") Then
rsResults__MMColParam = Request("yscon")
End If
%>
<%
Dim rsResults__ysbed
rsResults__ysbed = "1"
If (Request("ysbed") <> "") Then
rsResults__ysbed = Request("ysbed")
End If
%>
<%
Dim rsResults__MMColParam3
rsResults__MMColParam3 = "xyz"
If (Request("type") <> "") Then
rsResults__MMColParam3 = Request("type")
End If
%>
<%
Dim rsResults
Dim rsResults_numRows
Set rsResults = Server.CreateObject("ADODB.Recordset")
rsResults.ActiveConnection = MM_YotShop6_STRING
rsResults.Source = "SELECT * FROM YotStock WHERE Area LIKE '"
+
Replace(rsResults__MMColParam, "'", "''") + "' AND bedrooms
LIKE '" +
Replace(rsResults__ysbed, "'", "''") + "' AND type LIKE '" +
Replace(rsResults__MMColParam3, "'", "''") + "' ORDER BY
price ASC"
rsResults.CursorType = 0
rsResults.CursorLocation = 2
rsResults.LockType = 1
rsResults.Open()
rsResults_numRows = 0
%>
"Julian Roberts" <[email protected]> wrote in message
news:euj4if$ici$[email protected]..
>>> Use Request instead of Request.Form for runtime
parameters.
>
> You haven't done it :)
>
> --
> Jules
>
http://www.charon.co.uk/charoncart
> Charon Cart 3
> Shopping Cart Extension for Dreamweaver MX/MX 2004
>
>
>
> -
Help: Data validation before commit or move to next record
The form that I am working on allows data insert. It needs to have a feature to inform the end user for incomplete field(s) before commit_form or move to next record for updating. Please let me know how you would do it.
Thank you,
JimmyTo prevent cursor movement out of a field in a When-validate trigger, all you do is Raise Form_trigger_failure;However, if the field is null and the user does not enter anything while tabbing through, or just clicking in then clicking somewhere else, the When-validate-item trigger does not run. You have to specifically check if the field is null in the When-validate-record trigger.
-
How to move to next record in PHP+ORACLE env
I install php3 +ORACLE in RH linux 6 box, the works fine.
I write a app to browse record in oracle table,I write two
frame, one top_frame,one body_frame,but How can I to move to
next record?
thanks any idea!!
nullone record item at a time...
-
Move to next record in a LOOP!
I have to perform a loop on an internal table consisting of several records.
within the LOOP there is an if-endif condition followed by some code.
Now, in the else condition of the if-endif part, i have to move to the next record (i.e. next record in the internal table)...If i use "Exit",the entire loop processing is skipped, but i just want to skip the current sy-index and loop for the next record in the internal table.
Please suggest some way to do it.loop at itab.
if <condn>.
else.
continue.
endif.
endloop.
continue will process the next loop from begining i.e. after continue it will go to the loop at itab statement for next loop pass.
regards
shiba dutta -
Update and move to next record
Sorry if this is a simple question.
I have a form that links to an access database. The page
calls the fields and there is no problem.
I want to be able to have users check the database
information, and make any changes and then update and move to the
next record.
In the update button wizard it asks for a page to go to once
updated - I just need it to move forward.
Thanks for any help.Hi,
I am not clear what you said. But I assume you mean to say:
Right after comming in your if statement you want to update the record first and then you need the validation?? If this is right then you have to move the validation just after the update statement and then print a message just before "END IF".
HTH
Ghulam Mustafa Butt -
How to move to next record of the databank file using custom code
hi,
can someone please tell me how to move to next or the previous record the Databank file. i found a funtion setcurrentdatabankrecord(), but i am not able to use it.
thanks in advance...Hi,
I recently had the same problem, here's my solution:
"setCurrentDataBankRecord" is available only to External Program Control.
I used the VB of an empty Word2002 Document.
1. you have to reference the webAnlyst.exe in the object-catalogue
2. create a module via the menue
3. type in the code
This is the code I used - some of the code is just for control
Private Sub TestSetDBRec()
Dim pdtest As webanlst.ProgT
Set pdtest = New webanlst.ProgT
Dim currDBI, numRecsCurrDB As String
' Workspace öffnen
pdtest.play.OpenWorkspace "VBTest"
' Script öffnen
pdtest.play.openScript "BM2B_VK_Änderung"
' DB-Abfragen
numRecsCurrDB = CStr(pdtest.play.getDataBankSize)
currDBI = pdtest.play.currentDatabankIndex
pdtest.play.setCurrentDataBankRecord (2)
currDBI = pdtest.play.currentDatabankIndex
' jetzt das Script abspielen
pdtest.play.doScript "BM2B_VK_Änderung"
End Sub
This works! You can also looping through the database by getting the current value and set the value back increased by e.g. one
Hope it is helpful! -
HCP tcode PA40 Upload program failing to move to next record.
Dear All
I have written and upload program for HCM tcode PA40 and the program is fine but only inserting one record and is failing to pick the next records in a loop. I dont know whats the problem i know the process have many screens, please help me, i have tried to research not yet found the answer yet.
Thank you for your assistance
Here is my Upload program
*& Report ZUPLOADEMPHIRING
REPORT ZUPLOADEMPHIRING.
include bdcrecx1.
PARAMETERS: p_file TYPE rlgrap-filename.
x_endrow TYPE i .
DATA: xdate(10).
DATA: Fullname type string.
DATA: x_begrow TYPE i VALUE 2,
x_begcol TYPE i VALUE 1,
x_endcol TYPE i VALUE 17,
x_endrow TYPE i VALUE 3.
TYPES: BEGIN OF t_datatab ,
FromDate(10),
Reasonforaction(2),
Position(8),
PersonalArea(4),
EmployeeGroup(1),
EmployeeSubGroup(2),
SubArea(4),
PayrolArea(2),
Title(5),
Lastname(40),
Firstname(40),
BirtDate(10),
Nationality(3),
Group(1),
Level(1),
BankKey(15),
BankAccount(18),
END OF t_datatab.
DATA: BEGIN OF t_datatabfinal OCCURS 0,
FromDate(10),
Reasonforaction(2),
Position(8),
PersonalArea(4),
EmployeeGroup(1),
EmployeeSubGroup(2),
SubArea(4),
PayrolArea(2),
Title(5),
Lastname(40),
Firstname(40),
BirtDate(10),
Nationality(3),
Group(1),
Level(1),
BankKey(15),
BankAccount(18),
END OF t_datatabfinal.
DATA: BEGIN OF it_record OCCURS 0,
FromDate(10),
Reasonforaction(2),
Position(8),
PersonalArea(4),
EmployeeGroup(1),
EmployeeSubGroup(2),
SubArea(4),
PayrolArea(2),
Title(5),
Lastname(40),
Firstname(40),
BirtDate(10),
Nationality(3),
Group(1),
Level(1),
BankKey(15),
BankAccount(18),
END OF it_record.
DATA: itab LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE,
gd_currentrow TYPE i,
it_datatab TYPE STANDARD TABLE OF t_datatab,
wa_datatab TYPE t_datatab.
AT SELECTION-SCREEN on VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME' "
EXPORTING
FIELD_NAME = 'P_FILE '
IMPORTING
FILE_NAME = p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = ' '
MASK = ' '
CHANGING
FILE_NAME =
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = p_file
i_begin_col = x_begcol
i_begin_row = x_begrow "Column header not required
i_end_col = x_endcol
i_end_row = x_endrow
TABLES
intern = itab.
Sort table by rows and colums
SORT itab BY row col.
Get first row retrieved
READ TABLE itab INDEX 1.
Set first row retrieved to current row
gd_currentrow = itab-row.
clear: t_datatabfinal.
refresh t_datatabfinal.
LOOP AT itab.
Reset values for next row
IF itab-row NE gd_currentrow.
APPEND wa_datatab TO t_datatabfinal.
CLEAR wa_datatab.
gd_currentrow = itab-row.
ENDIF.
concatenate sy-datum6(2)'.' sy-datum4(2)'.' sy-datum+2(4) into xdate .
CASE itab-col.
WHEN '0001'.
wa_datatab-FromDate = itab-value.
concatenate wa_datatab-DocumentDate6(2)'.' wa_datatab-DocumentDate4(2)'.' wa_datatab-DocumentDate+2(4) into wa_datatab-DocumentDate.
WHEN '0002'.
wa_datatab-Reasonforaction = itab-value.
WHEN '0003'.
wa_datatab-Position = itab-value.
WHEN '0004'.
wa_datatab-PersonalArea = itab-value.
WHEN '0005'.
wa_datatab-EmployeeGroup = itab-value.
WHEN '0006'.
wa_datatab-EmployeeSubGroup = itab-value.
WHEN '0007'.
wa_datatab-SubArea = itab-value.
WHEN '0008'.
wa_datatab-PayrolArea = itab-value.
WHEN '0009'.
wa_datatab-Title = itab-value.
WHEN '0010'.
wa_datatab-Lastname = itab-value.
WHEN '0011'.
wa_datatab-Firstname = itab-value.
WHEN '0012'.
wa_datatab-BirtDate = itab-value.
WHEN '0013'.
wa_datatab-Nationality = itab-value.
WHEN '0014'.
wa_datatab-Group = itab-value.
WHEN '0015'.
wa_datatab-Level = itab-value.
WHEN '0016'.
wa_datatab-BankKey = itab-value.
WHEN '0017'.
wa_datatab-BankAccount = itab-value.
WHEN OTHERS.
ENDCASE.
APPEND wa_datatab to t_datatabfinal.
ENDLOOP.
clear: it_record.
refresh it_record.
loop at t_datatabfinal into it_record.
append it_record.
endloop.
perform open_group.
loop at it_record.
concatenate it_record-Firstname it_record-Lastname into Fullname separated by space.
perform bdc_dynpro using 'SAPMP50A' '2000'.
perform bdc_field using 'BDC_CURSOR'
'T529T-MNTXT(02)'.
perform bdc_field using 'BDC_OKCODE'
'=PICK'.
perform bdc_field using 'RP50G-EINDA'
it_record-FromDate. "" '01012012'.
perform bdc_field using 'RP50G-SELEC(02)'
'X'.
perform bdc_dynpro using 'MP000000' '2000'.
perform bdc_field using 'BDC_CURSOR'
'PSPAR-PERSG'.
perform bdc_field using 'BDC_OKCODE'
'=UPD'.
perform bdc_field using 'P0000-BEGDA'
it_record-FromDate. "" '01.01.2012'.
perform bdc_field using 'P0000-ENDDA'
'31.12.9999'.
perform bdc_field using 'P0000-MASSN'
'ZB'.
perform bdc_field using 'P0000-MASSG'
it_record-Reasonforaction. "" '01'.
perform bdc_field using 'PSPAR-PLANS'
it_record-Position. "" '99999999'.
perform bdc_field using 'PSPAR-WERKS'
it_record-PersonalArea. " 'm003'.
perform bdc_field using 'PSPAR-PERSG'
it_record-EmployeeGroup. "" 'a'.
perform bdc_field using 'PSPAR-PERSK'
it_record-EmployeeSubGroup. "" '02'.
perform bdc_dynpro using 'MP000100' '2000'.
perform bdc_field using 'BDC_CURSOR'
'P0001-BTRTL'.
perform bdc_field using 'BDC_OKCODE'
'=UPD'.
perform bdc_field using 'P0001-BEGDA'
it_record-FromDate. ""'01.01.2012'.
perform bdc_field using 'P0001-ENDDA'
'31.12.9999'.
perform bdc_field using 'P0001-BTRTL'
it_record-SubArea. "" 'mm01'.
perform bdc_field using 'P0001-ABKRS'
it_record-PayrolArea. "" 'Z2'.
perform bdc_field using 'P0001-PLANS'
it_record-Position. ""'99999999'.
perform bdc_dynpro using 'MP000200' '2000'.
perform bdc_field using 'BDC_CURSOR'
'P0002-NATIO'.
perform bdc_field using 'BDC_OKCODE'
'=UPD'.
perform bdc_field using 'P0002-BEGDA'
it_record-FromDate. ""'01.01.2012'.
perform bdc_field using 'P0002-ENDDA'
'31.12.9999'.
perform bdc_field using 'Q0002-ANREX'
it_record-Title. "" 'Mr'.
perform bdc_field using 'P0002-NACHN'
it_record-Lastname. " 'maxwel'.
perform bdc_field using 'P0002-VORNA'
it_record-Firstname. "" 'razaro'.
perform bdc_field using 'P0002-GBDAT'
it_record-BirtDate. "" '01011970'.
perform bdc_field using 'P0002-SPRSL'
'EN'.
perform bdc_field using 'P0002-NATIO'
it_record-Nationality. "" 'ZW'.
perform bdc_dynpro using 'MP000700' '2000'.
perform bdc_field using 'BDC_CURSOR'
'P0007-BEGDA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'P0007-BEGDA'
it_record-FromDate."" '01.01.2012'.
perform bdc_field using 'P0007-ENDDA'
'31.12.9999'.
perform bdc_field using 'P0007-SCHKZ'
'MANORM'.
perform bdc_field using 'P0007-ZTERF'
'9'.
perform bdc_field using 'P0007-EMPCT'
' 100,00'.
perform bdc_dynpro using 'MP000700' '2000'.
perform bdc_field using 'BDC_CURSOR'
'P0007-BEGDA'.
perform bdc_field using 'BDC_OKCODE'
'=UPD'.
perform bdc_field using 'P0007-BEGDA'
it_record-FromDate.""'01.01.2012'.
perform bdc_field using 'P0007-ENDDA'
'31.12.9999'.
perform bdc_field using 'P0007-SCHKZ'
'MANORM'.
perform bdc_field using 'P0007-ZTERF'
'9'.
perform bdc_field using 'P0007-EMPCT'
' 100,00'.
perform bdc_field using 'P0007-ARBST'
' 8,00'.
perform bdc_field using 'P0007-WKWDY'
' 5,00'.
perform bdc_dynpro using 'MP000800' '2000'.
perform bdc_field using 'BDC_CURSOR'
'P0008-TRFST'.
perform bdc_field using 'BDC_OKCODE'
'=UPD'.
perform bdc_field using 'P0008-BEGDA'
it_record-FromDate. "" '01.01.2012'.
perform bdc_field using 'P0008-ENDDA'
'31.12.9999'.
perform bdc_field using 'P0008-TRFAR'
'01'.
perform bdc_field using 'P0008-BSGRD'
'100,00'.
perform bdc_field using 'P0008-TRFGB'
'01'.
perform bdc_field using 'P0008-TRFGR'
it_record-Group. ""'a'.
perform bdc_field using 'P0008-TRFST'
it_record-Level. "" '1'.
perform bdc_field using 'P0008-DIVGV'
'173,00'.
perform bdc_field using 'P0008-ANCUR'
'USD'.
perform bdc_field using 'Q0008-IBBEG'
xdate.""'12.01.2012'.
perform bdc_field using 'P0008-WAERS'
'USD'.
perform bdc_dynpro using 'MP000900' '2000'.
perform bdc_field using 'BDC_CURSOR'
'P0009-ZLSCH'.
perform bdc_field using 'BDC_OKCODE'
'=UPD'.
perform bdc_field using 'P0009-BEGDA'
it_record-FromDate. ""'01.01.2012'.
perform bdc_field using 'P0009-ENDDA'
'31.12.9999'.
perform bdc_field using 'P0009-BNKSA'
'0'.
perform bdc_field using 'Q0009-EMFTX'
Fullname. "" 'maxwel razaro'.
perform bdc_field using 'P0009-BANKS'
'ZW'.
perform bdc_field using 'P0009-BANKL'
it_record-BankKey. ""'10351'.
perform bdc_field using 'P0009-BANKN'
it_record-BankAccount. "" '543234667778'.
perform bdc_field using 'P0009-ZLSCH'
'b'.
perform bdc_field using 'P0009-WAERS'
'USD'.
perform bdc_dynpro using 'SAPMP50A' '2000'.
perform bdc_field using 'BDC_OKCODE'
'/EBCK'.
perform bdc_field using 'BDC_CURSOR'
'RP50G-PERNR'.
perform bdc_transaction using 'PA40'.
endloop.
perform close_group.
Regards
WilliamHi,
It seems like you are uploading data to a screen that contains table control.just check the link below for your reference
[http://wiki.sdn.sap.com/wiki/display/ABAP/bdcontable+control]
Regards,
Vamshi
Edited by: vamshi reddy . ch on Jan 13, 2012 7:38 AM
Edited by: vamshi reddy . ch on Jan 13, 2012 7:39 AM -
No required validation windows wnen move next record
Hi master
Sir I have master detail block
In master block key-commit I put this code
if :ystatus ='P' then
message('Can not be update becuase this year Completely Closed');
message('Can not be update becuase this year Completely Closed');
go_item('voumaster.entdate');
elsif :ystatus ='T' or :ystatus ='N' then
commit_form;
go_item('voudetail.accid');
end if;
means if condition true then commit other wise not commit
and in detail block I put this code in key-commit event
if :ystatus ='P' then
message('Can not be update becuase this year Completely Closed');
message('Can not be update becuase this year Completely Closed');
go_item('voumaster.entdate');
elsif :ystatus ='T' or :ystatus ='N' then
IF :ITEM62=:ALLTOTAL THEN
commit_form;
go_item('voumaster.entdate');
ELSE
MESSAGE ('RECORD NOT SAVE BECUSE DEBIT AND CREDIT NOT BALANCE');
go_item('voDETAIL.CREDIT');
END IF;
end if;
sir when I change in master block then system not give me error then check condition if true then save otherwise move entdate textbox
but
when I change in detail block and press F10 then system not give me error and move entdate textbox but when I change record or go next previous record then system give me error do you want to save then change you have made?
Yes no cancel Button
Sir my need is system not required this message and easily go to next record only when I press f10 then show message and save my record
Please give me idea where I put my code or which event I disable
Thank
Aamirthank for your reply
sir i use your code
message('Can not be update becuase this year Completely Closed');
pause;
but not sovle my problem
sir my problem is when i change in detial block and go to master block without save detail block in master block i move to next record then system give me save validation windows
i not need validation window when move mext record and move next record without save detail block
please give idea
thak
aamir -
Problem in moving to next record in For Loop end loop construct
Hi friends i have the followind code in my stored proc. I am reading each row in the temprec and then based on the variable "i_copy_notes" processing the record. If the value of the I_copy_notes" varialble is 1 then i need to move to next record. when I am using "Next" then the compiler is telling me that the "NEXT" must be declared. Please advise.
FOR TEMPREC IN
SELECT
DP_SER,
GRD_POS,
TS_POS,
ASG_ID,
DESCS,
GRD_ID
FROM DCGRD_POS
WHERE CLLI = i_FROM_CLLI AND SUBSYS = i_SUBSYS AND BAY_ID = v_OLD_BAY_ID ORDER BY GRD_ID
LOOP
IF v_OLD_GRDID = TEMPREC.GRD_ID THEN
v_NEW_GRDID := v_NEW_GRDID;
IF i_COPY_NOTES = 1 THEN
Next;
END IF;
ELSE
v_OLD_GRDID := TEMPREC.GRD_ID;
SELECT DCGRD_POS_GRD_ID.NextVal INTO v_NEW_GRDID FROM DUAL;
END IF;
INSERT INTO DCGRD_POS VALUES
i_TO_CLLI,
DCGRD_POS_ROW_SER.NextVal,
TEMPREC.DP_SER,
v_NEW_GRDID,
v_NEW_BAY_ID,
TEMPREC.GRD_POS,
DECODE(i_COPY_NOTES,1, TEMPREC.TS_POS,''),
TEMPREC.ASG_ID,
DECODE(i_COPY_NOTES,1,TEMPREC.DESCS,'UASGN'),
i_CURRENT_ISSUE,
-1,
i_SUBSYS,
SYSDATE,
i_USERID
END LOOP;
Line # = 315 Column # = 10 Error Text = PLS-00201: identifier 'NEXT' must be declared
Line # = 315 Column # = 10 Error Text = PL/SQL: Statement ignored
----------------------------------------------Personally, I'm not a big fan of this technique but you can use a goto ...
begin
for i in 1.. 10 loop
if i < 5 then
goto end_of_loop;
end if;
dbms_output.put_line(i);
<<end_of_loop>>
null;
end loop;
end; -
Hi All,
How I can move to next record (when a condition applies)?
In other words I need the object (or sample code) that perfoms the "Next Record" in navigation menu.
Thanks All,
VangelisHello,
use following statement
SBO_Application.ActivateMenuItem("1288")
where SBO_Application is the UI API application object.
Rahul -
How to implement JSF text input down-arrow key = next record navigation?
Hi All,
I've got a small query which you experts might be able to help me through. I would not be surprised if such questions would already have been raised in this forum.
Formerly, I've created an Oracle Form that allow user to quickly insert data in bulk. It only has three 3 fields - first name, second name and address. Because of the flexibility of the Oracle Form, by pressing the down arrow key, user is able to create record when the last record is detected. And vice versa by hitting the up arrow key, it will move to the previous record when the current record is not the first record. So basically, the form is very 'key-driven' and without the use of the mouse, a lot of data can be inserted very quickly and efficiently.
I've successfully converted such form to an ADF BC JSF page using the JHeadstart toolkit. But when I showed it to my users for comment, they were really disappointed with the number of mouse interactions they need to click every time to navigate between records as well as creating new records. My question is can I build some sort of ADF JSF event handler on any of the text items to perform the following tasks:
1.) When 'down arrow key' is pressed AND not the last record THEN
Go to the next record.
2.) When 'down arrow key' is pressed AND is the last record THEN
Go to the next blank record.
3.) When 'up arrow key' is pressed AND not the first record THEN
Go to the previous record.
4.) When 'up arrow key' is pressed AND is the first record THEN
Do nothing.
If all the four above tasks are achievable in ADF JSF, can you please guide and brief me on the steps to implement them. Or these functionalities are already available somewhere in other open source toolkits. Your help is much appreciated. Thank you and have a nice day.
Kind Regards,
JohnHi Steven,
I've tried to incoporated attached link's codes with the JHeadstart generated code inside the jspx but I still cannot get it to work. There is a lot of Javascript error and is impossible to debug.
Regards,
John -
How to go to the next record during mail merge in Pages
I'm trying to create a directory booklet using Pages and Numbers. I have names and addresses listed in rows in Numbers, and I'm trying to use Mail Merge to transfer the data to Pages. After the merge is complete, however, I'm left with one page per name/address, rather than one page with multiple addresses.
Is there a way to resolve this? I'm not creating mailing labels, but it follows the same concept. Is it possible to insert some sort of "next record" field, so that the data moves to the next row in Numbers?
Thanks for your help. I'm new to Pages and am feeling very frustrated!Cathy,
Use Find and Replace to replace the Section Break character codes with nothing (empty replace field). The document will then collapse with as many records per page as will fit.
Jerry
Maybe you are looking for
-
Is there a way to password protect a photosmart printer so that others cannot use it?
Is there a way to password protect a PhotoSmart printer?
-
In jsp:includes , is there a flush="false" in jsp 1.1
In <jsp:includes>, is there a flush="false" in jsp 1.1...i know that it's going to be in jsp 1.2 but is there something like it that i can use in jsp 1.1.
-
Alter number of CPU's used by Solaris
Regarding a performance test being done on some databases running on Solaris 10, I'd like to alter the number of CPUs being used by the system. Currently there is 4 CPUs available and all are used, but I'd like that only 2 of them are to be used. (Ph
-
Can I print the photo book with any fonts?
I would like to print a photo book using iphoto. Is it possible to print this by using any fonts?
-
Link error: Failed to open external module
Newbie question #2... I'm in chapter 5 of the tutorial, just added the button to calculate min and max values of the sinewave. I get two link errors when I try to run the program. 2 Project link errors: Failed to open external module Failed to open