Move to Premiere Pro CS5.5?

Dear Steve:
I think your book about Premiere Elements 9 is great. It’s been very helpful as I try to learn the program.
I have a 64-bit Windows 7 operating system on Dell XPS laptop with 8gb of RAM. I learned yesterday that PE9 uses only 4gb of RAM or less because it is a 32-bit program.
I would like to consider moving up to Premiere Pro CS5.5 (I get an educational discount) to increase how much RAM is used. Would you please answer a few questions?
1) If I install Premiere Pro on my machine, will it be able to work with videos created in PE9?
I am in the middle of a project (25 clips, video about 7 minutes). I am concerned that I won’t be able to have PE9 and Pro on my computer at the same time, and if Pro doesn’t read PE9 files, I’ll have to uninstall Pro to finish the project.
2) I assume the Pro version will be faster, but will it solve some of the problems I’ve been having in PE9?
a) difficulty regulating audio levels even using key frames and the audio panel
b) some rough spots in the narration even after rendering (I use a mike that is plugged into the mike jack with a mini-plug. I don’t use a USB mike).
c) thought bubbles bouncing around
d) difficulty selecting the text box when doing titles. If I don’t hit just the right spot, it becomes the text editor and I have to try again to select the text box
3) Although I have 8gb of RAM, my video card has only 1gb. Will that still allow a lot of improvement in performance if I go to Premiere Pro?
4) With an educational discount, I can get Premiere Pro for $345. Do you see any reason (based on what I’ve said above) not to get it?
Thanks. Would you please respond to the e-mail as well as the forum: [email protected]
Richard

1) If I install Premiere Pro on my machine, will it be able to work with videos created in PE9?
>>You can install both Premiere Elements & PRO at the same time even launch and work with both the apps simultaneously.
2) I assume the Pro version will be faster, but will it solve some of the problems I’ve been having in PE9?
>>Pro is 64bit while PRE9 is 32bit so the scenarios where higher memory is required, PRO will be having advangate of able to use greater than 4GB RAM. However, 64bit version of PRE10 is now available. So performance of Pro & PE10 should be comparable
a) difficulty regulating audio levels even using key frames and the audio panel
>>Please state exactly what you want to do
b) some rough spots in the narration even after rendering (I use a mike that is plugged into the mike jack with a mini-plug. I don’t use a USB mike).
>> try to record using Windows Sound recorder and see if its doing the same
c) thought bubbles bouncing around
d) difficulty selecting the text box when doing titles. If I don’t hit just the right spot, it becomes the text editor and I have to try again to select the text box
>> Select the Text layer on Video track instead of text box on monitor panel.
3) Although I have 8gb of RAM, my video card has only 1gb. Will that still allow a lot of improvement in performance if I go to Premiere Pro?
>> Pls check in Pro forum. you will see improvements in the area where the application uses GPU card. I think Pro uses this for preview and few other stuff.
4) With an educational discount, I can get Premiere Pro for $345. Do you see any reason (based on what I’ve said above) not to get it?
>> No idea

Similar Messages

How to work with Premiere Pro cs5.5 and After Effects cs5 together?

I have edited my movie in premiere pro cs5.5 and made the rough cut. In premiere, i have edited the video, put in soundtrack and foley. Now, i need to add muzzle flashes & blood splatters in some scenes and final color correction using After Effects cs5.
When i import the premiere project in AE and make the changes, and then i export it back as premiere project. When i open this prmiere project, it shows vaious kind of errors and no changes are retained that i did in AE. Also, when i import the premiere project (which has 4 different sequences) in AE, all the media that has been imported in the premiere project also opens in AE making it difficult to organize the media.
How should i work now so that i add vfx and color correction using AE cs5?
I thought of exporting the video from Premiere pro and then open the video in AE and add vfx to some scenes and color correction to the full video and render it out again. But, this is the first time i am using AE and i am not sure if this is the best way. PLEASE HELP.
Or, i could import the whole project in AE, add vfx, do color correction AND then export to video from AE. But i think, it will be better if i export the video from Premiere as it has loads of options to choose from while exporting to a movie.
The dynamic link does not work between Premiere Pro Cs5.5 and After Effects cs5. Even if it does, its not working on my pc.
All the footage is in HD and i want the final result in best quality HD too. PLEASE Help!

If you are working between After Effects and Premiere Pro but with versions that are not the same number, you need to just work with movies rendered and exported as intermediate, lossless files.
Dynamic Link only works between After Effects and Premiere Pro of the same version number, and only when they are installed as part of the same suite.

Problem with screen size in Premiere Pro CS5?

I'm making a movie in Premiere Pro CS5 and I've ran into a problem with the screen size. The source screen shows my footage in widescreen (16:9) but my project screen is playing the widescreen footage in standard size (4:3) so it is cutting off some of the footage from the screen. I would like to make my entire project standard size so how do I do that? (Most of the chopped off footage was adjusted in After Effects so does that have anything to do with it?)
Thanks for any help you can give!

The properties of the footage are:
872 x 486
00;00;25;00, 29.97 fps
48000 Hz - 32-bit Float - Stereo
The properties of the sequence are:
Editing Mode: DV NTSC
Timebase: 29.97 frames/second
Video:
Frame Size: 720 horizontal 480 vertical 4:3
Pixel Aspect Ratio: D1/DV NTSC (0.9091)
Fields: Lower Field First
Display Format: 30fps Drop-frame Timecode
Audio:
Sample Rate: 48000 Hz
Display Format: Audio Samples
Video Previews:
Preview File Format: NTSC DV
Codec: DV NTSC
Width: 720
Height: 480
I'm also quite a beginner at Premiere Pro and basically all the Adobe programs, so are there any good websites (preferably free) that give good help and information for beginners like me?
Thanks!

Mov files in Adobe Premiere Pro CS5 - XDCAM (MPEG) resp MPEG 1/2 (xdvc)

Problem description:
I got a bunch of MOV files on a HFS+ formated disk for editing on Premiere Pro CS5 (5.0.3). When I import to Premiere, Premiere says "Codec missing or unavailable". Paragon HFS+ is used to handle the HFS+ formated disk. I copied the data to a NTFS formated disk before using.
The reseach I did give the following indications:
I did try to play in Quicktime and Quicktime told that I would need additional software to play the .mov file. But I could execute show movie inspector and it shows "XDCAM EX 1080i 50 (35Mb/s VBR)".
VLC plays (!) and tells that it is a "Mpeg 1/2 Video (xdvc)"
MediaInfo says "MPEG Video (XDCAM)"
Sound is (L)PCM according to the mov inspector programs.
The MPEG2 format seems to be supported by Premiere (also in HD), forum entries tell me I should be at version 5.0.2 as there Adobe supports the MOV container. So now my question: What am I missing?
I have no idea on the Camera used to film, but it could be a JVC, as it is told that the JVC writes mov files.

Hi Colin,
The explanation is quite simple and it appeared to me sometime during the weekend when executing completly different tasks.
The video source is different! The small clips (and your test clip) are what came from the camera and was transcoded to mov, my test clip was the edit out of FCP! It was by chance the only mov-file left, all others have been deleted after transforming to mp4, not to keep the data in double and fill up the disks with unnessecary data. So I tested this clip, which was the mistake!
Testing one of the original input files confirmed your result!
The difference between the files is having indeed 2 mono audio streams (input mov) vs one stereo stream (edit mov), all 3 obviously PCM.
Input MOV
Audio #1
ID                               : 2
Format                           : PCM
Codec ID                         : lpcm
Duration                         : 2s 760ms
Bit rate mode                    : Constant
Bit rate                         : 768 Kbps
Channel(s)                       : 1 channel
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Delay relative to video          : 4h 14mn
Stream size                      : 259 KiB (2%)
Audio #2
ID                               : 3
Format                           : PCM
Codec ID                         : lpcm
Duration                         : 2s 760ms
Bit rate mode                    : Constant
Bit rate                         : 768 Kbps
Channel(s)                       : 1 channel
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Delay relative to video          : 4h 14mn
Stream size                      : 259 KiB (2%)
Edit MOV:
Audio
ID                               : 2
Format                           : PCM
Format settings, Endianness      : Little
Format settings, Sign            : Signed
Codec ID                         : sowt
Duration                         : 9mn 26s
Bit rate mode                    : Constant
Bit rate                         : 1 536 Kbps
Channel(s)                       : 2 channels
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Stream size                      : 104 MiB (4%)
Thanks,
Lucien.

Importing mov files in premiere pro cs5

I just installed Adobe Creative Suite 5 Master Collection on my machine and now, i have two issues.
1. I do have the latest quicktime installed but when i try to import *.mov files with audio, only the audio is imported and works fine. the video isn't, but I dont get a dialogue error box.
A). if the *.mov file has only video, i get a file import failure message saying " the file has no audio or video streams".
2. the next prob is my dymanic linking does not work.
Help please

Im trying something and I hope you can help me. I have two computers, one dedicated to capturing a event and the other I have is dedicated to playback. They share the hard drive via a network. What I want to know is- is there a way for the dedicated playback machine to access a video file that is still being captured by the capturing machine and play back parts of it in a sequence??
Gosford Lawrence
!https://www3.oovoo.com/oovoocallme/images/btn1.png|height=68|alt=http://webvideocall.oovo o.com/callme/gosford/236|width=123|src=https://www3.oovoo.com/oovoocallme/images/btn1.png| border=0!
Date: Thu, 21 Apr 2011 17:40:14 -0600
From: [email protected]
To: [email protected]
Subject: importing mov files in premiere pro cs5
Zone Alarm, eh? I used to use that program, but it got in the way of almost everything that I did, that I canned it completely.
Glad that removing ZA solved your issue.
Personally, I find MOV Animation CODEC to be quite good, and use that for a lot of work. Jeff Bellune, here, like the Photo JPEG format, but I have not explored that.
Good luck,
Hunt
>

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

Error Importing Premiere Elements project into Premiere Pro CS5

Hi,
I am working on a multi-part video project that I started in Premiere Elements 8. I put in hours upon hours of editing on the first part and I found that the more I edited, the more often the program would crash (infuriating!). So I started using Premiere Pro CS5 to produce the second part, resolving to come back to the first part later. Well, I've come back around to needing this first part done, and it is just undoable in Elements (crashes every 20 seconds!). I'd like to import that project into CS5 if possible. The help documentation says this should be perfectly possible... but I'm having no luck.
When I attempt to open my Premiere Elements project in Premiere Pro, it tells me the project must be converted from Elements .prel to Pro .prproj, and I click through the prompts as normal. But then as soon as it starts trying to open the project, I get this:
"The Project could not be loaded. It may be damaged or contain outdated elements."
I downloaded the Premiere Elements 9 trial to see if it would be less crashy (and it is), but I'd really prefer to have all my video in one program, and CS5 does the best job (and has most of my hours invested). Elements 9 opens the "damaged" project just fine and I can edit and export normally, so why can't CS5?
Am I stuck recreating the project from the ground up in CS5?

In very general terms, a contemporary PrE Project (PREL), will Open in PrPro, with the steps that you outlined.
Now, there are all sorts of considerations, for aspects that will not likely work:
Instant Movie/Themes, as PrPro cannot read those
Some Effects that PrPro does not have, like the NewBlue FX
Some Transitions that PrPro does not have
Some Title animation Presets, that PrPro does not have
Do you have any of the above in your PrE Project? There are probably other circumstances, but those are all that come immediately to my mind.
The simpler the PrE Project, the greater the likelyhood that it will Convert to a PrPro PRPROJ file.
PrE 8 and PrPro CS5 should be close enough to work, again in those general terms. I can Open simple PrE 4.0 Projects in PrPro 2.0, but cannot Open PrE 7, 8 or 9 Projects in PrPro 2.0.
Good luck,
Hunt

Premiere Pro CS5 Playback and Performance Issues

I upgraded (2) separate editing work stations to CS5 from CS4 about a month ago. I moved from 4 to 5 to try and get rid of some problems which both work stations were encountering.
The problems since the upgrade are similiar: playback from timeline has intermittent audio drop out and video going to black during playback, (new one)-video locked up but audio kept playing-system hung and had to be rebooted.
Also, when clicking around on the timeline or scrubbing the timeline, Premiere crashes.
This type of performance on playout or timeline usage is consistent on both machines which have indentical setups and builds. None of this happens all the time but happens enough to causes problems with workflow. We edit on the work stations, dub files to playback system for air, and use a shared server to move files back and forth as needed but files are always stored locally instead of using straight from server.
These machines are:
Premiere Pro CS5.02
OS WIndows 7 Pro 64 bit
12 GB Ram, DDR3-1333 (6-2GB modules)
CPU Intel Xeon Quad Core [email protected] GHZ, 2 processors, 8 MB Cache
500 GB SATA 2 hard drive, 7200 RPM, 32 MC (System Drive)...309 GB of space avail
(3) 1 TB SATA 2 hard drives, 7200RPM, 32 MC (3 TB, RAID0 STorage) 2.16 TB of space avail
Nvidia GE Force 9800 GT Graphics card, DUAL DVI, 1 GB
REaltek High Def Audio, Drivers 6.0.1.5953
(1) monitor in use
output of system runs to ADVC-700 breakout box to feed playback system
I have all of my software installed on C: (309 GB of 500 GB avail)
I have all of my videos files stored on D: (Raid Storage with 2.16 TB of 3 TB avail)
The only changes I've made since installing CS5 would be to change the auto save from 20 minutes to 60 minutes. Don't know if an auto save would cause an issue on playback as I've noted above.
I'm not a computer whiz by any stretch of the imagination but I can follow directions if given for testing/eval.

Do the PPBM5 Benchmark and send the results to me by PM, in addition to sending the results to Bill as indicated. I'll have a look at what might be going on here.

Premiere Pro CS5.0.4 -Will not play any video- reinstall didn't help

here's my system info -
Model: MacPro5,1, BootROM MP51.007F.B03, 4 processors, Quad-Core Intel Xeon, 3.2 GHz, 16 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5870, ATI Radeon HD 5870, PCIe, 1024 MB
   ----------------I only use one monitor, 1920x1200, 32bit color depth
   ------------------No Capture Card, No Sound Card or I/O box
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Serial ATA Device: HL-DT-ST DVD-RW GH61N
Serial ATA Device: TSSTcorp CDDVDW SH-222AL
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
---------- This 2tb Hitachi is my data drive - there are 600GB free (33%)
Serial ATA Device: OWC Mercury Extreme Pro SSD, 223.57 GB
   ---------This 250gb SSD drive is my system/application drive - 120GB free (50%)
Serial ATA Device: OWC Mercury Extreme Pro SSD, 111.79 GB
------------this 125GB SSD I use as a project-specific drive to serve up video very quickly when i'm generating Video material using the software VDMX
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd300000 / 2
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfd320000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x5a110000 / 3
FireWire Device: built-in_hub, Up to 800 Mb/sec
i've been using Premiere Pro for about a year and a half with no trouble, no crashes that i can remember.   I updated to 5.0.4 when it came out and experienced no problems.
I have not made any changes to my system (drivers, programs, etc.) since the last time i worked with Premiere Pro with no trouble. The only difference is that i generated approx. 52GB of new video files (mov. uncompressed 32bit 640x480 resolution) that i was beginning to edit in to a music video.
My current problem is:: there is absolutely no playback of video in 5.0.4.   not in the tiny project window preview, not in the source preview, and not in the timeline/canvas window.   when i push PLAY, the button turns into a square STOP button, but nothing happens.   this is independent of project or file type. The project i was working on when playback stopped is using uncompressed 640x480 32bit Quicktime files and one 44khz/16bit .AIFF file.   as a quick doublecheck, I just added a 640x480 Apple Intermediate Codec file and it also will not play back.   I opened older projects and none of them will playback.
My problem started while i was working on a project. I was working on the project for probably an hour and a half with no trouble. Then it seemed to get a bit sluggish and i could hear the HD churning a little more.   After rendering out a short section (just under 10 seconds), PPro did not play back the just rendered (now greenline) section. Immediate playback of rendered material was the default behavior, and this was the first time ever that the just rendered section did not play back.   I then discovered that no video would play back at all--in any of the windows.   I can scrub through all the video without any trouble--all the frames are there.
I shut down PPro, & restarted. No change.   I restarted my computer. No change.
Realizing that the problem was likely related to a lack of space on my data drive, i deleted approx. 500GB of files off my 2 TB drive, leaving just under a 1/3 of it free. i checked the drive for errors, and defragmented it. Premiere Pro still wouldn't play any file from any project.
The files are fine, they will playback anywhere else (several different file types involved in different projects). The files are compatible with Premiere Pro (uncompressed VGA resolution Quicktime .mov), i was editing on the timeline with them for hours before all video playback stopped.   All other Adobe programs (After Effects, Photoshop work fine).
I tried to find an answer/solution on these forums, unsuccessfully.   After uninstalling PPro and reinstall (did not help), and entire Suite uninstall, Adobe Clean, and reinstall, neither version 5.0.0 or 5.0.4 will play video --the no playback problem has persisted.
I was running out of HD space --i had less room than i thought -- down to about 7% of free space, a bone-headed move on my part. I'm not surprised that playback performance got compromised due to lack of space.   But i'm shocked that the problem is persisting.   Fortunately, i had just backed up my entire system the day before. (i've backed up many times before and this never affected PPro performance)
i tried to "CLEAN" the media cache for the sequence but it had no effect (in searching the forums, i saw somebody else have their 'crashing Premiere Pro' problem solved by hitting this button). I just took a look in the user/application support/adobe/common/5.0 to look at the "Media Cache" folder and the "Media Cache Files" folder.   Neither of them are empty, even after hitting the CLEAN cache button in the main preferences 'Media' settings window.   I don't know if this is the correct behavior or not.   (i'd expect a "clean" command to empty the folder, but i'm not the programmer)
This does not appear to be the ATI/5.0 problem that so many Mac users suffered (i was lucky to never have that problem).    Again, i've never had any problems with Premiere Pro over the last year and a half, until working on this latest project with the Hard Drive very low on space.   I'm 99.9% positive that's at the heart of the issue.
I don't understand why a clean reinstall did not help in this regard. The problem is clearly PPro specific.   I found one topic in the forum where someone else experienced this same "no video playback" problem, but there was never follow-up from the user saying whether or not his problem was solved (or what was done to correct the problem).
I'd love to get some help--- seems to be a very rare issue, but right now, i can do no video editing. btw, i started a new project as well and imported a .mov file -- same problem, no video playback.
the weird thing is that i can actually still edit video. i just rearranged my timeline assets and rendered out a minute-long quicktime (Apple Intermediate Codec) .mov and it looks and plays as it should.    This is really weird. I'm baffled -- there must be some way to fix this.   I don't want to have to go back to Final Cut, certainly not when i've already paid for Create Suite 5 Production Premium and EVERYTHING works except for video playback in PrPro.
thanks in advance for your help
Message was edited by: magneticjak
Message was edited by: magneticjak

hello.   hey, thanks very much for writing back. i got some good info with a search or two. (info about what regedit is and what corresponds to it in OS X -- regedit allows you to edit "preference" keys for individual programs, OSX's equivalent for these keys are the .plists in User & System: Preferences and Application Support)
what i ended up doing was uninstalling Premiere Pro (not the suite, just PPro).   Then i deleted a few preference files:
from User /Preferences/Adobe:
com.adobe.AdobePremierePro.plist
com.Adobe.Premiere Pro.5.0.plist
and from System Preferences:
the file: Adobe Premiere Pro Prefs
and..
/.../Premiere Pro/5.0/...
AMEPrefs.xml     (i noticed that there's also a preference file in Media Encoder's own folder so i didn't sweat this one)
Debug Database.txt
Placeholder Preset.epr
PostEncodeCmds.pref
PresetCache.xml
Trace Database.txt
NOTE:
of course i don't know if deleting any files beyond the 2 .plist files in User Prefs was necessary, but... it seems to have worked.
I then reinstalled Premiere Pro CS5, and fired up an old project and i've got playback of HD and DV files, and snappy editing and rendering, so hopefully i'm good to go.   I'm just going to stick with v5.0.0 because i actually don't remember ever having any trouble with it, and i don't remember v5.0.4 adding anything i was 'missing' or 'needed'
hopefully, this thread will be useful for any future folks that run into trouble - and it's got a solution for both Windows and OS X
happy editing,
peace

Why does Premiere Pro CS5 eat up space on my C drive when it conforms video files?

Hey everyone. I have Premiere Pro CS5 with the latest update installed. I am running Windows 7 64-bit on a 120GB Corsair SSD drive. I have set my scratch disk video and audio previews to a different hard drive (F: drive). I have three questions:
1. Why does Premiere eat up space on my C drive whenever it conforms the video files I import into my project?
2. Where on my C drive can I find the folder that holds all these conformed video files that are taking up space on my C drive?
3. How do I prevent Premiere from eating up space on my hard drive when it conforms the video files I import into my project? Is there some way to move whatever folder is eating up space on my hard drive when Premiere conforms the video files and tell Premiere to conform the video files on another hard disk so I don't lose precious space on my C drive?
Okay, that's four questions but, can some please help me on this? Thanks.
Okay, that's five questions.

hello,
i think you need to relocate you media cache files to a separate drive other than your c: drive.
in the hardware forum, Harm has done a wonderful job at advising on HDD setup, i think it mentions relocation
of swap file, media cache, etc. all which are defaulted to your c: in your user profile
after relocating to different physical drives (all without partitions) performance usually increases
Generic Guideline for Disk Setup by harm
hope this helps til someone else answers more
good luck...
j

While importing clip getting error "The file contains too many audio channels" in premiere pro cs5

Hey,
I am using video clips from sony digital hi8 camera and trying to import video clips (.mov) 720*480 fps 29.97 .But unable to get into premiere pro cs5.System configuration:
MAC 10.6.4
2.66ghz intel core i7
4gb ram
nvidia geforce gt 330 mn.
Error :
Actually ,i have checked the inspector panel and i found same infomation in
in this panel for both clips .please check these clips screen shoots seprately .
Actually i have a long video clip and i have scatterred this clip into 6 diffrent portions
where i am not able to import the last video clip.It is giving me same error "file contain too many audio channels"".
Regards
Manoj

I too am getting this error in Premiere CS5. I was digitizing a Broadcast VHS and since I did not have a breakout box, I hooked it up to a Sony DV deck so I could connect via firewire and capture inside Premiere. I was able to capture and import 1 of the 3 clips and it did have 4 audio channels attached to it. However, upon closer inspection only 2 channels had a waveform. I captured the other 2 clips the same way, but this time, Premiere give the error "The file contains too many audio channels."
Any ideas?

Adobe Audition CS5.5 with Premiere Pro CS5

Hello everybody.
I am considering downgrading from Master Collection CS5 to Adobe Production Premium CS5.5
But quite frankly it's just because of one application.
Though, i am in doubt if i'll actually going to make the downgrade.
And as you could and might have guessed it is the Adobe Audition CS5.5 Application.
Though really the whole pack has a GREAT improvement overall, I just actaully want to mix SEAMLESSLY with Premiere Pro and sound editing application (Audition).
Which leads me to my next question.
Now with Adobe Soundbooth CS5 closed off (by April 24th), and an UPGRADE for Soundbooth CS5 users to Audition CS5. Does this mean that Audition CS5.5 works SEAMLESSLY with Premiere Pro CS5?
Is there a dynamic link between the two applications? (Audition CS5.5 and Premiere Pro CS5)
AM i able to send mixes between the two? I really don't want to loose any Audio data, such as 5.1 channel mapping, volume mixing, denoising, general mixing etc.
All i really need is some good quality sound editing which works seamless, as After Effects and Premiere Pro has proved to me can be done.
Just want to know if it is possible. Or if I REALLY have to upgrade in order to get the sweet apples.
Best
Lucas

Hi _durin_
Thanks for your quick response.
But I didn't quite understand your answer.
I have seen Jason Levine's video earlier, as CS5.5 was announced and it looks natively good. I understand the mixdown attributes etc.
Please correct me if im wrong HOWEVER this workflow and settings applies still to ONLY the new CS5.5 Version?
Im currently using Master Collection CS5.
Instead of getting either the Production Premium, or Master Collection I am strongly considering updating Soundbooth CS5 to Audition CS5.5 (the option is there as i can tell by SoundBooth's website, though i get a weird error message when I click the update link...)
However I need to know, IF Audition CS5.5 works well with the PREVIOUS version (that'll be CS5 not 5.5), of Premiere Pro.
Are there an option to render the reference video, and generate a interchange session from WITHIN Premiere Pro CS5 to Audition CS5.5?
Im sorry if I either sound harsh or "willingly" misunderstanding. But I have only documentation on how the integration works between the current versions (meaning 5.5).
Im as you can guess VERY confused over the move from Adobe to make a .5 version instead of a full-fledged CS6 solution. It causes a stir, cause I then don't know much of the integration between the previous applications.
I have seen as an example that Photoshop CS5 have gotten the update to receive paintings/files made with their new touch API. So I wonder whether integrational features will be a part of the CS5 pack since, as i've mentioned, an application like Soundbooth gets replaced with Audition, with an upgrade option for the Soundbooth owners.
Im confused and hope you can help me clear my mind up, whether to upgrade or not. I will download the trial eventually, but not onto my current CS5 system since I already use this in my daily video work and want to AVOID confusion.
Best
Lucas

Adobe Premiere Pro CS5.5 crasing from ripple delete and copy

I've been using Adobe Premiere Pro CS5.5 for several months now and it's been working with next to no problems and I've been very happy with it until today.
As I've neared the end of a recent project, after doing nothing different than usual I went to use ripple delete and every time I try it I now get this error message:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\Action\ClipTrackRippleAction.cpp-56]
Then:
Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.
Then:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program…
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.
Then:
Adobe Premiere Pro CS5.5 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
Then if I try to copy clips or move multiple clips this error message shows up:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\Action\SequenceAddTransitionAction.cpp-57]
Then:
Premiere Pro Debug Event
Premiere Pro has encountered an error.
[..\..\Src\Sequence\TrackItemTrack.cpp-639]
Then:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program…
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application’s support team for more information.
Then:
Adobe Premiere Pro CS5.5 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
[Close program]
I am, however, still able to move single clips, adjust the length of individual clips and able to watch my project.
I've tried two different computers and restarted one and nothing has changed.
Is there an explanation as to why this is happening? Is there anything I can do to get around this or make it stop?

Lord Nelson here.
I've reverted back to 5.5.0 as I was experiencing lock-up problems with the BM Intensity Pro.
Unfortunately I haven't found a way of simply uninstalling the update and reverting back to an earlier version. Win 7 Sytem Restore wouldn't, so I had to uninstall Premiere Pro, apply the Adobe Clean Install utility (or whatever!) and then reinstall PP CS5.5. Trouble was that it reinstalled the whole suite, not just PP - so I lost all custom workspaces across the suite.
Grrrrr!

Why does Premiere Pro CS5 process audio source before exporting clip in AME CS5?

Hello everyone, my first post here. I am currently trying out the trial CS5 Master Collection on my MacBook Pro. I've been using Premiere Pro CS5 to put together family videos. I select a certain portion of a sequence and queue it for export in Media Encoder CS5 in the format H.264 for iPod with video and audio.
Now in AME I have a queue list of about 5 clips from the sequence. But when I hit the Start Queue button, the bottom left of the progress bar states "Adobe Premiere Pro processing audio source from [then file name]" for all 5 clips from the sequence then creates the first output file.
Then it moves to encode the second and again states "Adobe Premiere Pro processing audio source from [then file name]" for all 5 clips of mt sequence then spits out only the second output file.
This continues for the remaining 3 output files. The total sequence length is ~32 minutes with transitions and it takes about 35 minutes to export which is all consumed by the process audio source of the 5 clips in my sequence for 5 separate times.
Is there a certain reason why Media Encoder or Premiere Pro does this process of audio source? Is this process necessary or needed? I experimented with choosing different output formats but the results are the same. Any help would be appreciated, thanks.

Now that's pretty good follow-up to your first post, and quickly too! Nice detective work.
As you have found, there is basically a Render/Replace operation going on in PrPro, to get the material in the correct form for AME.
Thank you for reporting, as it saved me, and others, from basically saying what you said.
Good luck, and sorry that you beat us to the punch.
Hunt

Maximum File Size of .dv Import File to Premiere Pro CS5?

Hello Community:
I searched this forum and Google in general, but could not find an absolute limit on the media file size I can import into a Premiere Pro CS5 project. I'm scheduled to process the ".DV" recording from a conference, which could go on for hours. I have asked the camera man to break up the recording in one-hour segments, but I'm getting some push-back.
Is there a specific size limitation on importing an NTFS file structure .dv file in Premiere Pro CS5?
Thanks,
Rich Locus

Same issue. I previously used NeoScene to convert .mov files from a Canon 5d mark ii to the easier to edit with Gopro Cineform .avi format in Premiere Pro CC. They used to work fine but now Premiere only recognizes a very small part of the file. The first 18 seconds of an 8 minute file.
I tried importing the file to a new clean scene and the problem remained.
I need to be able to work with this footage. Somehow Premiere is no longer able to properly read clips it used to be able to read.
I would like to hear something from Adobe on this issue.
EDIT: I just updated my GoPro software to 2.0 and the problem was instantly solved. The same might apply to TechSmith.
EDIT 2: Upon rendering the edit I discovered that while the entire length of the clip was represented it in fact stopped playing new frames at the same frame as it had before. So no luck. Updating GoPro Cineform made the length of the file display correctly (7min) but did not actually let me play the file beyond the first 18 seconds - it just showed the same frame.
I deleted all preview files and cleaned Media Cache files (under media/preferences) - this didn't help.
Finally I made the file offline, closed Premiere, changed the file name and re-opened Premiere. Then I right clicked over the file in the Project window and chose replace file to re-connect. The file finally came in correctly. I've now rendered it and it runs through the entire 7 min.
Message was edited by: ereitz

Move to Premiere Pro CS5.5?

Similar Messages

Maybe you are looking for