Move tool issue : Command key + mouse dragging for moving any layer not working in PS CC

I'm trying to move a layer within the document by holding command key and mouse dragging (mouse cursor not above the layer) is not working at all while using move tool. Suddenly this functionality stopped working. Now I have to place my cursor on layer to be move and drag with mouse. Also pressing command key changing auto select option from layer to group.
Please help.

Usually when a tool is not working as expected, a Reset of that tool might be the answer.
Select the move tool in the toolbox,
Go to the move tool icon on the top left of the screen (just above the toolbox in its' Option bar) and Ctrl-click on it to get the Reset menu.
Click on Reset Tool.

Similar Messages

  • Move tool and command key in photoshop 2014.2 is driving me mad

    Hi all,
    I'm extremely frustrated with the new move tool in the 2014.2 update. I can no longer able to isolate a selected layer and move it about by holding down command key. Instead every time by holding down command key (while move tool is selected), it'll toggle between layer and group selection. So when you drag, instead of just moving the isolated layers, it'll toggle group and drag the entire group.
    Does anyone know how can I revert this back to the good old days or how do I revert back to 2014.1 version.
    Many thanks

    I was greeted with the same frustration this morning. Talked to a coworker and found a way around the update.
    Turn OFF auto-select (I know, it’s a bummer)
    Command click layers on your canvas -OR- just select the subfolders and multiple layers in the layers palette.
    Drag those selected multiple layers around (no need to hold any key down or aim mouse over layers)
    To deselect layers, command click outside canvas
    Looks like the update is forcing us to press “Command” PRIOR (instead of during) the move action. Hope it helps, coworker said not using auto-select prevent him to move things by accident.

  • Hot key(Ctrl+F1) for More field help not working

    Hi all,
    I am facing a strange problem. When I have run my WD application there will be some UI elements on the browser say one Input field. If I want to check the More information about this input field, I have to make a right mouse click on it and the More field help appears. By this I am getting the technical information about the UI element.
    The Hot key to do this is Ctrl+F1. It's not working with in my server, it's just open the Internet explorer Help. Although I am able to use this Hot key in an other server to find the More field help.
    Can anyone suggest me why I am not able to get the More field info from the Hot key Ctrl+F1 in my server. Is there any setting which needs to be made in my server.
    I have also tried out to check the HandleHotKeys property of the ROOTUIELEMENTCONTAINER in my view but it's not working for me as well.
    Please suggest what will be the reason.
    Thanks
    Sanket sethi.

    Your right, I was thinking the opposite - that it wasn't working in 7.0.
    Perhaps this change is becuase F1 now launches the Help Center as of 7.01 and higher.
    I'm not sure there is a hot key associated with the more field help any longer.  I checked the javaScript and F1 is tied to the "help" event (the help center).  Alt, Shift or Ctrl - F1 are all routed back to the browser help functionality (bHelp). See this screenshot:
    http://farm2.static.flickr.com/1382/4606421952_5824ee1507_o.png

  • What key(s) do i type to change language from english to other? i am writing s story in dual languages. i was told to click command and space bar together but it is not working.

    what key(s) do it type to change language from english to other? i am writing a story in dual languages. I was told to click command and space bar together but it is not working.

    Command Spacebar opens Spotlight as you have found out. If you want to change languages you need to say what app you are using to write the story in, I'm guessing you are using Pages or MS Word. If that's the case
    Pages: Open Inspector - Click the T tab - Click Language and change your language.
    MS Word: Tools Menu - Language - Choose your language.

  • How do I move aiff files from the viewer to the timeline-it is not working when I try to drag and click or clicking on overwrite or insert in Final Cut Pro 7. Thanks

    How do I move aiff files from the viewer to the timeline-it is not working when I click and drag or when I try to move the files to the overwrite or insert buttons-Thanks.

    hi
    You cannot move audio from the viewer
    Mark your in and out points then in the browser grab hold of the audio tracks icon and drag that to the time line
    PJ

  • Link for territory mgmt is not working

    Hi All,
    We have territory management configured for three custom attributes.
    Link for territory management is not working for territory assignment block on account overview screen.
    Any hint how we can solve this issue?
    Thanks and Regards,
    Gauri.

    How are you resetting the password?
    Resetting User Password in Lion, Mountain Lion & Mavericks
    Boot into your Recovery Partition by hold down the Command and R keys whilst booting.
    When the Recovery screen appears, go to the Utilities menu and open Terminal.
    In Terminal, type:
    resetpassword
    ...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
    Good luck,
    Clinton

  • InfoButton PJC   Demos for Forms (tooltip buttons) - not working

    Hello everybody,
    I am new to using PJC and JavaBeans in forms. I have on my laptop Oracle Developer Suite 10g (10.1.2.0.1) and Forms Demos version 9.0.4.2.0 I downloaded from OTN. I studied InfoButton PJC application (buttons that show tool-tips at mouse-over).
    Now, I want to create in one of my old forms such a button. I followed exactly the steps of the demo, that is:
    1. I created a form with a button TEST_BUTTON for which I set the Implementation Class property to oracle.forms.demos.enhancedItems.InfoButton.
    2. On the form's canvas I also created a text item named INFO with the following properties:
    X Position = 255
    Y Position = 107
    Width = 100
    Height = 100
    3. At form level, I created the trigger WHEN-NEW-FORM-INSTANCE in order to set the button's properties as follows:
    SET_CUSTOM_PROPERTY('CONTROL.TEST_BUTTON',1,'INFOBUTTON_TEXT','This is the tooltip text');
    SET_CUSTOM_PROPERTY('CONTROL.TEST_BUTTON',1,'INFOBUTTON_FIELDPOS','288,128');
    4. I created in my formsweb.cfg file a configuration section for my form.
    [pjc_demos_dana]
    pageTitle=OracleAS Forms Services - InfoButton Demo Dana
    IE=jinitiator
    baseHTMLJInitiator=demobasejini.html
    archive_jini=frmall_jinit.jar,/forms/formsdemo/jars/infobutton.jar
    form=pjclaunch_dana.fmx
    width=675
    height=480
    separateFrame=false
    splashScreen=no
    lookAndFeel=oracle
    colorScheme=blue
    background=/formsdemo/images/blue.gif
    When executing the form, the button has round margins as said in the documentation; at mouse over the cursor takes the form of a small hand but there is no tool tip. I receive no errors, only that it doesn't show the tool tip.
    I don't understand why it's not working, what I did wrong ...
    When setting the 'INFOBUTTON_FIELDPOS' property - input parameter X,Y - the documentation says: "This property should be set to a string containing a X,Y comma separated pair providing the location of the target field in pixels relative to the top left hand corner of the window. The X,Y pair simply has to define a point anywhere within the target field, it doesn't have to exactly define the corner".
    What is the target field? The text item I created at step 2)? The documentation is not clear here ...
    Any help will be appreciated.
    Daniela

    Dear Safwan Bhai,
    As salaamo alaikum Rahamatulla hi burakathu!!
    Actually I'm having a multi record block in which all the emp no., days of attendance, etc will be displayed when I click on the search button. My requirement is when point the mouse over the emp no, the emp name must be displayed as a Tool tip text. My fields are non-editable, so Post-Change is not working. I placed the coding in the When-new-item-instance - in this case the emp name is displayed, but only for the first field, when I move the mouse to second and third fields, the empname of that particulart field is displayed as a tool tip but in the first field only.
    Any other suggestions?
    Anyway I would appreciate your help.
    Thank you.
    With Kind Regards,
    Perumal Senthil Alagu.

  • Drag and drop feature is not working in Maverick?

    what can i do when the Drag and Drop feature is not working in my I Mac Using Maverick 10.9.4, it will not do it at all i must do copy and paste.
    reading from earlier forums this has been a problem in earlier versions for the mac.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

    Since downloading Yosemite Flash Player not working. Have downloaded Flash Player for Mac, but still not working. Is there a fix for this? Thanks.

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button.
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
       Download it first.
       The next step is important.
       Click Safari in the menubar and select “Quit Safari”.
       If it doesn’t quit, Force Quit it.
       Press command + option + esc keys together at the same time. Wait.
       When Force Quit window appears, select the application if not already.
       Press Force Quit button at the bottom of the window. Wait.
       Application will quit.
        Follow the prompts and install it.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.

  • My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

    My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

    Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

  • In iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work.  Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8

    in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
    Tom at the Genius Bar told me that Option Delete would work. It does not.
    I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
    This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
    When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.

    Hello Achates:
    I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    In that way, you will have a fresh copy of OS X and your current settings will be preserved.
    Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
    Barry

  • Why negative stock is possible for Moving avg price & not standard price?

    why negative stock is possible for Moving avg price & not standard price?

    Hi,
    Negative stock is available for both MAP as well as Std. price.
    Eg.
    MAP-->
    1. Mtl with MAP 1 Rs/pc & stock of 10qty.
    2. GI done for 15 pcs. Each pcs evaluated with 1Rs (MAP). Stock value reduce by 15Rs. Offsetting entry takes place in consumption account of 15Rs. The stock and stock value is -5 each.
    3. Post GR of 10pcs with PO price 3Rs/pc.
    Now GR/IR should credited with 30Rs.
    Negative stock (which issued) with 1Rs. But incoming mtl. is of 3Rs/pc. So difference of 2Rs for Qty 5 (Neg. stk) of 10Rs. will posted to Price Difference account. And remaining 20Rs posted to stock account.
    Std. price.--> step 1,2 remain same
    3. Post GR of 10pcs with PO price 3Rs/pc.
    Now GR/IR should credited with 30Rs.
    Durin GR Stock account posting will be 10Rs but due to negative stk value the net stock value will be 5 Rs. Remaining 20Rs posted to price difference acct.
    Regards,
    Sandeep

  • New Release QuickVPN client 1.4.0.5 for windows 7 does not work????

    New release of QuickVPN client version  1.4.0.5  for windows 7 is not working properly.
    We can not connect; instead we receive this message:
    "Remote Gateway is not responding, do you want to wait?"
    Dear Cisco,,,,
    Your release is not complete; please correct issue and advise after it has been tested.
    Rgds, EM

    Hi, first disable this POLSTORE.DLL again in your QuickVPN-Folder. Then start in this folder IPSEC.MSC and than IPSEC.EXE. You should get from IPSEC.EXE  the error above. If not, than any other problem you have. Follow all the hints here in this thread.
    If you get the same error above, than enable this POLSTORE.DLL again and start the IPSEC.EXE. You get the full info what has been gone. And within the IPSEC-Window for Local Computer you may find this FREESWAN-setting.
    B.t.w. before I went this way I did export and import the IPSEC-settings from the XP-machine, as it was hinted some posts earlyer. But the way I have gone, works also with manualy deleting the FREESWAN config. With the IPSEC.EXE it will new generated in any case.
    When you start via QuickVPN you may monitor also what happens within this IPSEC for Local Computer. Press F5 to keep it aktual.
    From time to time the connection gets only succeeded after the second and more times. I have a very slow UMTS Internet-Access.
    Juergen
    Adding: These effects, getting not connected, first and during the VPN-Tunnel exists, has not changed since the top-first Version of Quick-VPN.
    Dear customer, be patient, don't care about these stupid messages, click again or when the connection allready has succeeded through the VPN-tunnel do what you did like to do.
    ...... and again, with which configuration-scenario do the guys at Cisco test and develop .....
    Fortunately, I never was a Cisco partner, only a poor user ;)

  • My ipod 3 generation,Keys of volume up and down are not working..What can i do?

    My ipod 3 generation,Keys of volume up and down are not working..What can i do?

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • 6 keys "5tgb-[" on mac air keyboard do not work or act up

    6 keys: "5tgb-[" on mac air keyboard do not work or act up. No known damage.

    I took it to the Apple store and they checked it for free. They stated that they found liquid inside (to my great surprise), which costs $800 to fix. I declined, since a new one costs $1100. Even AppleCare would not have covered it, so it was not a problem that my 3-year AppleCare just expired.
    I find it quite a coincidence that 2 of us had exact same problem within a week and we both posted it.

Maybe you are looking for