Move Tool (Selection) is Selecting Layers that are Inside of HIDDEN GROUPS. Major Bug. Needs Fix.

I've been begging Adobe to fix this bug, but I've received no response.
Here is a video that describes the problem. http://youtu.be/woMEI29gn_8
If you have any suggestions, or if I have a setting wrong, PLEASE let me know.
I've been trying to get this answered for MONTHS.
All the best,
Jeremy

How have you been
begging Adobe to fix this bug
– with a bug report over at http://feedback.photoshop.com/photoshop_family/ ?
Anyway I can’t reproduce the issue.
Are you fully updated, what’s your OS, …?

Similar Messages

  • I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11:  the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, howev

    I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11:  the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK.  Also I cannot drag the selection to another photo in the photo bin as before.

    Hi,
    Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
    Thanks,
    Anwesha

  • Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

    Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

    Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player.  It may supply the codec it needs.
    Not sure why you wouldn't be able to play straight avi files though in quicktime.

  • How can I read and write text in rings that are inside an array?

    Hello All!!!
    How can I read and write text in rings that are inside an array?
    Regards and thanks in advance.

    Use a Property Node linked to the Ring inside the array.
    Of course, all elements in the array will have the same text values.
    B-)
    Message Edited by LabViewGuruWannabe on 12-13-2007 09:47 AM
    Message Edited by LabViewGuruWannabe on 12-13-2007 09:48 AM
    Message Edited by LabViewGuruWannabe on 12-13-2007 09:49 AM
    Attachments:
    Strings-BD.PNG ‏17 KB
    Strings-FP1.PNG ‏23 KB

  • 4 days ago NBC announced that hackers can intercept email and other communications that are meant to be encrypted. What update fixes this issue?

    4 days ago NBC announced that hackers can intercept email and other communications that are meant to be encrypted. What update fixes this issue?

    First, I would avoid listening to NBC as a source for tech news. They've proven that they are not a responsible source for that kind of thing. See:
    NBC severely overhypes Sochi hacking story
    Second, the SSL issue is solved by upgrading to iOS 7.0.6, as Allan points out. Plug in your phone, open the Settings app and go to General, then Software Update. Download and install the update from there. You can also download it on your computer, in iTunes, and install through sync, but that download will be larger, since it's not specific to your device.
    Finally, note that you still cannot trust e-mail... anything you put in an e-mail might as well be put on a postcard. SSL encryption only protects the transmission of username and password, when it comes to e-mail... the contents of the messages sent and received are not encrypted, and can be read (or even modified) by anyone between you and the sender/recipient. The only way to protect your e-mail is through some kind of signing and encryption, such as S/MIME.

  • I have 7 users that are interested in ExportPDF. Do I need 7 separate licenses?

    I have 7 end-users that are interested in ExportPDF. Do I need 7 separate licenses or just one since the service is cloud based?

    Hi candanceh48631207,
    Your assumption is correct. Each subscription is tied to a unique Adobe ID/email address. So, you'll want to purchase a subscription for each user, and have that subscription tied to their Adobe ID/email address.
    Please let us know if you have additional questions.
    Best,
    Sara

  • Users in an OU that are members of a group (CMD, not PS)

    Hi,
    I need help finding the users in an OU that are in a specific group.  What I have so far is:
    dsquery user "ou=users" -limit 300 | dsget user -memberof 
    This happily shows the lists of groups each user is in, but provides no identifying information to each list.  It would seem that using dsget user -memberof and -fn -ln are mutually exclusive.  This is unfortunate.  Is there an easy way to
    do this?
    Please don't suggest powershell.. while I would love to use it, my current domain admins think powershell is of the devil. I'd love to use foreach but I'm a bash/tcsh scripter, not cmd.

    Hi,
    In addition to others’ suggestions, we can also try running a script to achieve our target.
    Regarding this point, the following script can be referred to for reference.
    List Group Memberships for All the Users in an OU
    http://gallery.technet.microsoft.com/scriptcenter/5e389d97-285d-4398-ab01-38a841d7adb8
    In addition, we can also try asking the question in the following scripting forum.
    The Official Scripting Guys Forum
    https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
    Hope it helps.
    Best regards,
    Frank Shen

  • Can I disable photo stream from select devices that are connected to my iTunes account?

    Hello,  I was wondering is there any way to do this because I have three iPads connected onto my account, one is in another country and one my parents own, but for my personal one, I would like to disable this feature so my pictures don't get uploaded. My parents like to see the photos being taken by family in another country and I would like those two devices connected only. 

    You can turn off photo stream on one device without effecting the others.  If you want to keep the photo stream photos on the device you are going to turn it off on, you will need to same them to your camera roll before doing so.  To do this open the my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll.  Then go to Settings>iCloud>Photos and turn off My Photo Stream.  This will delete the photo stream photos from this device, but not the others (and you already saved copies of these photos to your camera roll so they will still be on your device).
    The other two iPads that are signed into your iCloud account with photo stream enabled will still be sharing the same photo stream but you will no longer see it, and your photos will no longer be added to the stream.  They can still share photos with you by adding them to a shared stream and inviting you as a subscriber (as explained here: http://help.apple.com/icloud/#/mmc0cd7e99). 

  • Selecting pictures that are not in albums

    How do I select the pictures that are in my library, however are part of any album in the same library?

    Hi, Jacek. You can create a smart album with the criteria to contain pictures that are not in any album ("album" "is not" "any"). This smart album will update to remove pictures - that you place in other albums - from itself.
    Hint: In preferences, turn "Show Item Counts" on and see the numbers for yourself to double-check the results of your actions.

  • Move tool? And #of layers?

    Where is the move tool? How can I reposition a selection in a layer? And why can I only have three layers?

    Hi,
    why can I only have three layers: the reason is that you most likely are using the maximum dimension.
    you can then only use three layers. If you would work with smaller dimensions you would get more layers.
    Repositioning the selection - you can do this by pressing on the selection and moving it Or you can use the selection/transform.
    Move tool - if you want to move a selected area use transform (icon that looks like a cross) - note that it can lead to minor artifacts depending on how good your selection was.
    If you want to move all pixels on a layer withuot selection it will do that too.
    thanks,
    Ignacio

  • Swf playing layers that are dimmed out.

    I have been trying to save out an animation in swf.  However for some reason it's playing animations layers that been dimmed out( Which I  didn't want to include in the save swf.)
    I'm not sure what's going on.  I just want the layer "Walk_forward" to animate in the swf and not both "Walk_forward" layer and "Walk_in_place" I could just delete the one layer, but I would like to save them in the same file.
    Any ideas?  Thanks

    Right click on the title area of the layer you do not want in the animation and choose "Guide"  It will still appear on the timeline for you to be able to use as a guide/reference, but will not appear in the published file.

  • BUG: Layers that are turned off show up in published pages

    Layers that have visibility turned off in the timeline still show up in the published page.
    Also, these layers didn't have keyframes, which means they stayed on the entire time once they were instantiated.
    This makes it NOT appear within the program, but DOES appear when publishing. Was driving me crazy, and should be considred a program bug, since turning off visibility should be both in the software and the published page.
    - Ian

    Hi,
    Thanks for the quick response.
    I can't send a link at the moment, but it should be reproduceable by creating a layer on the timeline, clicking the EYE icon to unset Element Visibility, then publishing or previewing. The element will still be visible on the preview and the published page.
    I would expect the behavior of all layers that had visibility turned off to not be visible in the published page or preview.

  • How i can find number of messages that are inside a queue?

    Hi
    Thank you for reading my post.
    Can some one please let me know how i can find how much messages are inside a queue?
    Thanks.

    If you are using < 4.0, no (you will need to exec the command from java)
    If you are running 4.0 or later, you can do this using the JMX api (see the JMX developers guide)

  • Major bug-NEED HELP. Move any audio then no sound.

    Hey..I came across what has to be a bug and it's stopped me in my tracks. I have the latest version Of Logic Pro 8. I laid some guitar tracks but everytime i try to move them to get them in synch with the grid after I move the track, there is silence. No meters visible in the MIXER..NO SOUND will play..I Undo the move and everything plays again. These are continuous audio files. Also, in this particular session now if I move any track at all same thing..All audio stops and it's as if you are looking at a blank session even though you can see all your waveforms in front of you...Now, I have out of time guitar tracks and I'm stopped dead....I tried bounding the tracks to audio and reimporting them but same thing happens...ANY TIME I move any audio, ALL SOUND STOPS.....Anyone have any ideas? Thanks.
    Sean

    I think the song is corrupted...
    try to open a new song and import files and copy channel strips setting.
    G

  • How to select only layers that are both, visible and not blocked in photoshop cc?

    I used to do it in photoshop CS6 without any configuration, but now I can select only "not blocked" or "visible" layers? Can't I select both?

    We will need to reformat your EXT, but it will then work on both Mac and Win
    Connect the drive to your Mac, open disk utility
    Go to the partiton tab and select '1' ... format should be ExFAT ... in options select MBR
    Format the drive
    It should now work on both OSs; report back

Maybe you are looking for

  • Java Stack and Client

    In the ABAP stack "client" is a very important concept. Why there is no "client" concept in Java stack? When I login to java stack, why there is no entry for client?

  • Outlook connector unable to bind to ldap

    We are running outlook connector 7.3.106.4. with a JES 2005Q4 backend. Over the weekend we have restarted the whole environment due to upgrades. no configuration changes where made. Today we have users of the outlook connector getting the message 'un

  • Component -reg

    While making material booking in iw32->components tab,the following error appears; Entry    does not exist - check your entry - Error : 0058. But the matcode is present in the respective plant.so what is the setings to be done to capture the matcode

  • Authorization Check in Ecatt

    Hi Everybody, I need to check the user authorizations for a given tcode in ecatt. That is in the input file I will give three fields :- userid, password, tcode. We need to pick these fields and check whether the given user is authorized for the given

  • RDS plug-in for Eclipse

    I've been using the RDS plug-in for Eclipse 3.1 for a number of months, but now that Eclipse 3.2 is out and so many plug-ins require it (such as SQL Explorer and Quick REx), I really want to switch to it. However, RDS doesn't work on it and I have ye