Move transport request toone landscape to another

move transport request toone landscape to another.
Thanks In advance.

hello ,
To move transport to on elndscape to another you can login at OS level in source system at /usr/sap/trans/data & /usr/sap/trans/cofile directory. Find the name of the transport request in data & cofile directory. Then you can copy the corresponding request file from there & save it locally.
Now Login to target system & copy these transport file in the same target directory.
Now you can import the corresponding transport request to the target system.
Hope this will help you..
Regards
Anju

Similar Messages

Move transport requests from one landscape to another

HI Gurus,
   I am facing a situation where i need to import the Transport Request from one landscape to another.
    Consider i have two landscapes DE1 TE1 PE1 and DE2 TE2 PR2. and both the landscapes are on
    different release.
     I have created a Transport Request DE1Kxxxxxx.
     And now i want to use this transport request in the other landscape of DE2 TE2 PR2.
   How can i do that. Is there any process in using the Transport Request created in another landscape of different release.
Please guide me.
Thanks in Advance,
Sachin Kumar.

Hi,
Just do manual copy of both data and cofile to second landscape...there you need to change the naming conventions(SID)....But it will works only that is a customizing request...cause developments will depends upon installation nubers....
warm regards
Harish K Reddy

Move Transport request to target with different Sps

Hi All,
This is a very basic question. Just want to clear myself.
We have released some transports after applying NW 700 Ehp1. Can we move these transport to systems with NW 700 Sp16 (ie, w/o Enhp1) ?
Thanks!

Hi,
Such transports are technically possible, but inconsistencies can occur between the versions of the transported objects.For example if you first import the Support Packages in the development system and then change an object with a transport request, the version of the transport request is valid there.If you first import the transport request in the subsequent system and then the Support Packages, the version of the Support Packages is active there.
Jusy giving another small illustration
As an example, your development system is running a higher support package level then your acceptance and/or production. If an ABAP developer creates or modifies a function which uses functionality (pieces of code) brought into the system by a support package which is not available in the acceptance or production system, this function is no longer going to work after it has been transported to those systems.
THanks Debdeep
Edited by: Debdeep Ray on Jul 18, 2009 5:53 PM

Change object from one transport request to another

Hi,
I have a requirement wherein i need to change the object from one transport request to another. The thing is that i have saved
one in one transport request and when i am trying to transport it , it is not allowing me to transport as this transport request
contains some inactive object. I have also tried to delete that object from this transport request and put in another one
but when i tried to do that i was only allowing me to create sub task within the same request .
Kindly suggest me
Thanks
Parag

Hi,
you can either just delete the object from the object item list of the first transport request (just click away all warnings and hints). Then put it into a new request, lock it and transport it. You might ned to overtake the responsibility for the first request but with the appropriate authorization this should be no issue.
Other solution is using a transport of copies. This will tell you the object is locked in another request when you release it but still allow to transport it.
In all solutions you have to be sure that transporting the object without all other stuff in the request is possible as the objects are independent from each other. Otherwise you will not be able to import the request in the destination system.
Rgds.
Roman

Copy transport Request from Devlopment to Sand Box

Hi All,
Is there any way to move transport request from one system i.e. Development to Sandbox system(another system) without release.
Regards,
Manmohan

Hi,
If you do not want to release your actual transport request. Alternatively you can create transport of copies, release that, and test it on dev system.
In case testing is successful, you can release your actual transport and move it across.
If it is not, make the necessary changes and still you can record the changes in your actual transport request as you haven't released yet.
cheers !!!
Ashish

Transport Requests

Hello Experts,
I am facing couple of issues in transporting the requests from Dev to QA environment.
Firstly when trying to replicate DS in QA, DS is replicated but it is in MOdified status (and Cannot activate because QA system is non modifiable status) . I just right click on the appln component & then replicated metadata . Is ther any step I'm missing or can be taken so that DS can be activated ?
Secondly when trying to move transport request for transformation between InfoSource & DS getting this error message "Message no. R7501"
"Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)"
Also along with this message also getting message :-
Source RSDS ZQMNOTIFICATION_STATUS2 SD2CLNTXXX does not exist
Above mentioned source SD2CLNTXXX is dev DS and transport req is only for transformation .
I'm not able to understand why transformation req b/w IS & DS is including source system name.
Please advice if anybody has faced this situation.
Thanks,
Murtuza.

Firstly when trying to replicate DS in QA, DS is replicated but it is in MOdified status (and Cannot activate because QA system is non modifiable status) .
I guess, this is due to different versions of support packs in DEV & QA.
After replication of Datasource, now u have to transport the same datasource from BI Dev to BI QA. So, that it should overwrite the replicated one.
Secondly when trying to move transport request for transformation between InfoSource & DS getting this error message "Message no. R7501"
"Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)"
Also along with this message also getting message :-
Source RSDS ZQMNOTIFICATION_STATUS2 SD2CLNTXXX does not exist
Above mentioned source SD2CLNTXXX is dev DS and transport req is only for transformation .
I'm not able to understand why transformation req b/w IS & DS is including source system name.
Since the datasource is not actively present in QA, thats why transportion of transformation throwing errors. to transport Transformation, Datasource & InfoSource must present in QA
Now, in BI Dev u should collect Datasource, Infosource, transformation and transport them to QA.

Transport Request Ended with return code: === 12 ===

Hi
Good day to you.
We are able to move Transport Request from Development BW Client (with respect to an SEM-BCS Configuration) to Quality BW Client smoothly.
But when we move the same TR to Production client, we are getting the following error message. I would be very grateful if somebody could throw light on why it is happening, what could be its implications and what to do to avoid the same
Execution of programs after import (XPRA)
Transport request : DBWK901288
System : PBW
tp path : tp
Version and release: 340.16.37 640
Post-import methods for change/transport request: DBWK901288
 on the application server: sapbwpd
Post-import method FINB_TR_AFTER_IMP_METHOD started for UCREPGROUP T, date and time: 20081029144344
Post-processing taking place in client 300
Import carried out using RFC destination PBWCLNT300
Communication error: Destination PBWCLNT300 -> long text
Errors occurred during post-handling FINB_TR_AFTER_IMP_METHOD for UCREPGROUP T
FINB_TR_AFTER_IMP_METHOD belongs to package FINB_TRANSPORT_TOOL
The errors affect the following components:
 FIN-FB (Financials Basis)
Post-import method FINB_TR_AFTER_IMP_METHOD completed for UCREPGROUP T, date and time: 20081029144351
Post-import methods of change/transport request DBWK901288 completed
 Start of subsequent processing ... 20081029144344
 End of subsequent processing... 20081029144351
Execute reports for change/transport request: DBWK901288
 on the application server: sapbwpd
There are no reports to execute
Execution of programs after import (XPRA)
End date and time : 20081029144351
Ended with return code: ===> 12 <===
Regards
Siddique

Hi Siddique,
Looks like your RFC destination is wrong. The proper syntax is FINBTR@<system>CLNT <client>.
See also the note 644610.

Need TP command for Add Transport Request to import Queue all at a time

Hi SAP gurus,
Can you tell the o/s or TP command to Add Transport Request to import Queue all at a time which are available in co files directory ,
Because I have to add 500- 600 request . For every request I canu2019t do like this STMS_IMPORT -- Extras=> other requests -add--
Thanks and regards
babu

Hi,
You can export list of all transport requests from your DEV system in one shot, from SE09-> Display (provide your required selection criteria) -> Goto -> "Display as List"
You can export these all Transport Requests as Spreadsheet. Then Filter out all your required 400 to 500 Transport Requests.
Now,use another excel sheet to create a file with the list of required transport request Nos only, then concatenate all of them to generate the required TP commands as mentioned below.
The syntax will become as follows:
column1 column2 column3
tp addtobuffer DEVK900123 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900124 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900125 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900126 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp addtobuffer DEVK900127 <SID> pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900123 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900124 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900125 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900126 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
tp import DEVK900127 <SID> client=### pf=<Drive>:\usr\sap\trans\bin\TP_DOMAIN_<SID>.PFL
-> Open Notepad and Copy+Paste these three columns & save the text file in the <Drive>:\usr\sap\trans\bin\ folder.
-> Then rename this .txt file to *.bat.
-> open a command prompt and change to the <Drive>:\usr\sap\trans\bin\ folder and run the .bat batch file.
Make sure that object lists of all the Trans. Requests are checked and confirmed for the transport to avoid data incosistency in target system. (e.g. Number Range Object)
Regards,
Bhavik G. Shroff

Transport request's

hi Frds,
plz light on the transport request purpose, importance and procedures in sap implementations, if any doc available with screen shots plz mail to [email protected]
thanks in advance and good day guys
thanks
mohan.m

Dear Mohan.M,
For more information about the SAP Change and Transport System (CTS), visit the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/57/38ddff4eb711d182bf0000e829fbfe/frameset.htm
Transport Request is generated in following scenarios:
1. Customizing Request - When doing or changing some customization.
2. WorkBench Request - When configuration is cross-client. Eg Generating new Table, making changes in access sequence, Abap development, etc.
Transport request is not generated for Master Data. For eg: Customer Master, Material Master, price master, etc.
Benefit of Transport Request:
SAP Landscape normally has 3- Tier system:
Development Server - Where customization takes place. Transport request is generated at this level & then first transported to Quality server for testing whether it meets the requirement or not. Once the requirement is met in Quality server then Request is transported from Development Server to Production Server (Actual / Live System)
Quality Server - Mainly useful for testing.
Production Server Actual / Live server, where the real transactions are created & posted.
Procedure to Release & Transport Request:
1. In development server, go to T.Code: SE10 & select the check box Modifiable & enter
2. In the next screen, you will see list of transport request created.
Note: Transport request consist of main request along with sub request. These sub request hold the object to be transported.
3. Expand the main request & you will be able to view the sub requests attached to main request.
4. First release the sub requests.
Note: To release the request, select the request ni & click on release request individually (Do not select release all request)
5. Next release main request.
6. Once the request is released sucessfully, imform the basis person to import the request to QA server.
or
If the authority is with you, through T.Code: STMS, select development server --> select request no & release to QA server. Here when it pops up client no, user id & password, maintain it of QA server & release the request to QA server.
Hope this will help.
Regards,
Naveen.

Writing objects to a transport request

Hi all,
I generate structures and table types in an ABAP Program and I want to record these objects to a transport request. I use the function modules 'TR_OBJECTS_CHECK' and 'TR_OBJECTS_INSERT' to write the objects to a transport request, but in this case, for each object the dialog for entering the package name and transport request is shown. I want that all objects are saved in the same package and transport requests. Is there another function module by which I can record all generated objects in a transport request after the request and package number is asked only once?
Regards,
Sükrü

Hi Suekrue,
I think 'TR_APPEND_TO_COMM' is the one. We did something similar. First choose/Create the Request, then append objects:
*& Form TR_REQUEST_CHOICE
FORM tr_request_choice CHANGING pv_trkorr TYPE trkorr.
TYPE-POOLS:
 trwbo. "complex types for transport request display
DATA:
 ls_request TYPE trwbo_request_header.
CALL FUNCTION 'TR_REQUEST_CHOICE'
 EXPORTING
* IV_SUPPRESS_DIALOG = ' '
* IV_REQUEST_TYPES =
* IV_CLI_DEP = ' '
* IV_REQUEST = ' '
* IT_E071 =
* IT_E071K =
* IV_LOCK_OBJECTS = ' '
 iv_title = 'Auftrag auswählen, Aufgabe wird gefunden'
* IV_START_COLUMN = 3
* IV_START_ROW = 7
* IV_WITH_ERROR_LOG = 'X'
* IV_NO_OWNER_CHECK = ' '
 IMPORTING
 es_request = ls_request
 EXCEPTIONS
 invalid_request = 1
 invalid_request_type = 2
 user_not_owner = 3
 no_objects_appended = 4
 enqueue_error = 5
 cancelled_by_user = 6
 recursive_call = 7
 OTHERS = 8
IF sy-subrc = 0.
 SELECT trkorr
 INTO pv_trkorr UP TO 1 ROWS
 FROM e070
 WHERE trfunction = 'S'
 AND trstatus = 'D'
 AND as4user = sy-uname
 AND strkorr = ls_request-trkorr.
 EXIT.
 ENDSELECT."rkorr into pv_trkorr
ENDIF.
ENDFORM. " TR_REQUEST_CHOICE
*& Form TR_APPEND_TO_COMM
FORM tr_append_to_comm
CHANGING ps_alv TYPE LINE OF ty_t_alv.
DATA:
 ls_e071 TYPE e071,
 lv.
ls_e071-pgmid = 'LIMU'.
ls_e071-object = 'FUNC'.
ls_e071-obj_name = ps_alv-funcname.
CALL FUNCTION 'TR_APPEND_TO_COMM'
 EXPORTING
 pi_korrnum = p_trkorr
 wi_e071 = ls_e071
 wi_simulation = p_test
* WI_SUPPRESS_KEY_CHECK = ' '
* TABLES
* WT_E071K =
 EXCEPTIONS
 no_authorization = 1
 no_systemname = 2
 no_systemtype = 3
 tr_check_keysyntax_error = 4
 tr_check_obj_error = 5
 tr_enqueue_failed = 6
 tr_ill_korrnum = 7
 tr_key_without_header = 8
 tr_lockmod_failed = 9
 tr_lock_enqueue_failed = 10
 tr_modif_only_in_modif_order = 11
 tr_not_owner = 12
 tr_no_append_of_corr_entry = 13
 tr_no_append_of_c_member = 14
 tr_no_shared_repairs = 15
 tr_order_not_exist = 16
 tr_order_released = 17
 tr_order_update_error = 18
 tr_repair_only_in_repair_order = 19
 tr_wrong_order_type = 20
 wrong_client = 21
 OTHERS = 22
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
 INTO ps_alv-tr_message.
ENDIF.
ENDFORM. " TR_APPEND_TO_COMM
Pleas adapt to your needs.
Regards,
Clemens

Transport Request import Error

Hello Experts,
When I import transport request SAP system from another SAP system then getting error as "Result of cross-total check indicates a damaged data file (9114)" with the return code 16. Please suggest any one what is problem and how to resolve it?
Thanks.

Hi,
You can generate a transport os copies for the sae request an release it to get a proper datafie and cofile.
Regards,
Nirmal.K

How to move objects from one transport request to another transport request

Hi Experts,
When I am changing the code I selected the wrong the transport request number. I want to move my objects into another transport request number in the same DEV and same client number. Could you please help to move these objects between the transport request numbers.
Thanks,
Chinna.

Hi Chinna,
If you need to change a transport request number, you can use TCODE SE80
Click on Repository Browser tab
Then Select the Object(s) you want to change the Transport Request number
Right Click > Other Functions > Write Transport Entry
After that you will need to specify other existing Transport Request number OR create a new transport request number (F8).
Hope this is what you are looking for.
Thanks
Rohan

Moving object from one client to another using transport requests...

Hi,
If we want to move one object from one client to another, we go to se09 and release it. I know this. But after release what are the next steps to move it from one system to another ?
Regards,
Rajesh

Hello Rajesh
If the two systems share a common transport directory then you can simply go to transaction STMS, double-click on the import queue (target system), then choose menu Extras -> Other Requests -> Add.
The transport request will be added to the import buffer. Next you can import the request.
If the two systems do not share a common transport directory you can use RFC-enabled function module EPS_FTP_PUT to copy the data and cofile from the source to the target system (check for DIR_TRANS directories using transaction AL11).
Regards
Uwe

Move task from transport request

Hi,
I've created a report and I assigned the development to a wrong transport order.
How can I move the task to another transport order?

I think you are meaning workbench transprot request request by transport order. If it is, then yes you can move the task from the wrong transport request. Follow these steps
1. Go to SE10 and find the transport request.
2. Now locate the task under which your report is assigned in the transport request. Now expand the task and right click on your report name and select 'Delete'. It will give some warning message, select yes every time and the report will be removed from the transport request.
3. Now go to SE38 and open your report. Then try to save it. it will again ask for transport request. Now give the correct transport request.
Thanks,
Mainak

No system in the system landscape exports transport requests

Hi gurus,
We are trying to implement the Change Request Management scenario in
Solution Manager 4.0 SP12 in a POC.
The TMS are created with Solution Manager as Controller and with the settings are correct.
We have created a Maintenance Project with the following landscape :
system1 - Client 100 as Development System - Type of Rol "Source System"
system2 - Client 200 as Quality System - Type of Rol "Target System"
system2 - Client 100 as Production System - Type of Rol "Production System"
In the Change Request tab, when we check "Activate Change Request Management" checkbox, the following error is shown:
"System system2-100 is to be changed in a Solution Manager project, but no
system in the system landscape exports transport requests which are
imported into this system."
What is happening? Any idea??
Thanks

The reason may be, that your "POC" is not valid due to the fact, that you use "clients" and not "systems" to transport
What you can try to verify that is - take out the QA client/system out of the transport route and try then to activate just with DEV --> PRD.
We wanted to setup something similar in the past and TMS failed to get configured properly - due to exact that reason.
Markus

Move transport request toone landscape to another

Similar Messages

Maybe you are looking for