Move VS Windows App (Access DBS with one to many form)
I have a VS Windows App (forms connected to an Access DBS-including one to many form) and would like to have users access via our SharePoint 2001 site...
thank you.
mjschukas
Hi mjschukas,
This forum is to discuss problems of Windows Forms. Your question is related to SharePoint.
You can consider posting it in sharePoint forum(http://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointdevelopmentprevious)
for supports. Thanks.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
How do I maximize a window to full screen with one click?
How do I maximize a window to full screen with one click? Lion 10.7.4.
If it is a full sceen App, some are some aren't, just click the arrow icon in the upper right hand corner.
-
When an app is downloaded with one apple id and needs update later on then how to change apple id on app store for updting that app???
You can't. All apps are forever tied to the Apple ID used to obtain them, and cannot be updated using any other ID.
-
How do I move all the apps and podcasts from one mac to another mac?
What is the best way to move all the apps and iTunes content (songs, podcasts, etc) from one Mac to another Mac? I am switching to a newer computer. I connect (with cables) an iPhone 4 and an iPad 2 to the old computer for syncing.
Take a look at this.
iTunes: How to move your music to a new computer
When I recently got a new MacBook, I set it up with Times Machine using a backup of the old computer. It could not have been easier. If you use Time Machine - that will copy the contents of the old Mac to the new Mac - iTunes library included. You will have to authorize the new Mac in iTunes - Store>Authorize this computer.
There are ways of copying the purchased contents from the iPad to the new iTunes library as well if you need to do that. But as long as you have the old Mac - copying the library and putting it on the new Mac makes the most sense. -
From MS Access One-to-Many Form to Oracle Express
Hello, hello,
Firstly, I am new at Oracle and interested to really getting into out, however, I am a little ancy to get going. I'm looking for some sharp direction that could direct me to exactly what I need to do right now and then I can do further study, etc.
I have a MS Access database with many tables, queries, etc. But I set up a fancy form whereby I could scroll to the name (let's say EMPLOYEE) and then I have about 10 different forms (a tabbed interface because there were so many) show up where I could input data about that employee specifically. Then when I scroll to the next person, all of the subforms would change accordingly.
Thus, ultimately, what I would like to do using Oracle Express and APEX is to set up a page where I have a region which will pull a list of employees and act as a menu, then when someone select an employee (i.e., not only me) then all information, from numerous different tables pulls up and is visible, editable and can be added to. There could be a region for addresses, a region for links, for notes, for photos, for a list of articles, or whatever.
I hope you track with what I am looking at. In Access I have numerous tables, then I create a monstrous one-many relationship thingamajiggy and ka-boom, things all fit together in a form, and subforms. All editable by me, but hardly available for anyone else. I know Oracle is the way to go, so...
Can you assist me by explaining what I need to implement in Oracle? I am not clear on JOINs and what's the right one to use, how to adequately connect all of the dots, etc. Do I need to set up fancy queries, create SQL statements or what?
Thanks.Thanks. I don't think my question is strictly APEX related.
Rather, I am trying to determine how to create a "one-to-many" relationship (to use MS Access terminology) in Oracle Express. And then solve how to add data to them.
I can create a view which links two tables together where I can add data, but I want to be able to be adding data to several tables all linked together from the same primary key. One row per person (or employee) won't handle this, particularly if you want to add more than one row of data about the person in a table.
For example, if I had a restaurant with four employees (a cook, a waitress, a baker and a cleaner), my employees table would only have four rows. But now if I wanted to record the types of desserts the baker could make, that would take up more than one row. Therefore, from the baker, it would have to link to another table where I could input data about the different desserts. Typical one-to-many relationship. But the baker can also make different kinds of bread, thus another table with several rows. Perhaps the baker is so good, I may want to have yet another table for his different supremely delicious and famous pies (apple, pumpkin, pecan, etc.) which is now another table. The options are endless, but they all connect to the baker.
As a result, someone could come to my application and ask what can the baker do, and it will pull up a table of desserts, a table of pies and a table of breads.
Once I figure that out and can link many tables together using one primary key, then I presume I can easily move into the web application aspect. But for now, I am not quite there yet.
If someone can at least direct me as to what this is called in Oracle and give me a little direction, then I will feel more confident in moving forward. Thanks again! -
SSAS 2008 snowflake - dimensions with one-to-many relationship (NOT fact table) and hierarchy?
Hi, below is my data model for SSAS 2008 on snowflake schema.
Below is SQL Server DW tables:
DimStudent - StudentID [primarykey], StudentName, DateOfBirth, AddressID
DimStudentAddresses - AddressID [primarykey], StudentID [foreignkey], ddressLine1, AddressLine2, AddressType
FactEnrolment - StudentID, EnrolWeek, EnrolFees
So here FactEnrolement.StudentID is joined to DimStudent.StudentID column,
and relationship between DimStudent & DimeStudentAddresses is one to many I.e. one student can have multiple addresses like primary or secondry address.
To design snowflake schema in SSAS 2008 BIDS project :
[Question-1] how to join one-to-many dimensions (NOT fact table) Like DimStudent & DimAddresses?
[Question-2] At the end I want to have a single dimension only I.e. Student which should have both DimStudent & DimStudentAddresses tables attributes init. So I can create hierarchy from these two table into a single dimension? How
to do this?
Please reply with feedback particular to my above scenario as I refereed other MSDN forums but nothing solid I found.
Any STEP-BY-STEP guideline please. Many thanks.Hello KM,
Have you solved this issue after refer to Bill's suggestion? Please let us know how things go.
If you have any feedback on our support, please click
here.
Best Regards,
Elvis Long
TechNet Community Support -
Controlling Delete Order with One-To-Many
I have a class that has six 1-M mappings. All of them have a 1-1 back reference. I would like to control the order of deletion to ensure that one of the child collections is always deleted last.
It was suggested to me to use an after-load method to call addConstraintDependencies on the parent descriptor to control the order. This method is being called (before login) but it did not change the order. I added the after-load to the parent descriptor, adding the constraint dependency of the class I want deleted last.
I also tried using "multi-table info" (in addition to the regular one-to-many mappings) but that seems to cause the valueHolder to retrieve the items from the table twice, giving me a list with "doubles" of every item.
What can I do to control the order of the deletes of the children?
Thanks,
AllenHi Don,
This is with reference to your comments on the following oracel forum query "http://forums.oracle.com/forums/thread.jspa?messageID=508819��" regarding 1:M mapping insertion problem.(Same one)
Actually I also have the same kind of scenario but the data in not getting inserted to the detail table. It always gives ORA-1400 error as it is unable to populate the foreign key of parent in child table.
Can you suggest if I am missing something.
Your quick response will be appreciated.
Message was edited by:
user466708 -
TopLink11 Tutorial problems with one-to-many relation
Hi,
I installed TopLink 11 and the related tutorial to work in a simple Eclipse project.
Everthing works fine except for the storing of the one-to-many relation in the database.
The tutorial works with employee, address and phone tables/classes. Plain Objects can be stored and one-to-one relations too. However when trying to store a one-to-many relation not the key of the related object (which is at that tome well known) but the object is tried to be entered
in the Logfile I find:
[TopLink Fine]: 2008.01.10 10:27:28.748--DatabaseSessionImpl(12916846)--Connection(9550256)--Thread(Thread[main,5,main])--INSERT INTO EMPLOYEE (EMP_ID, L_NAME, F_NAME, ADDR_ID, VERSION) VALUES (?, ?, ?, ?, ?)
bind => [1501, Pascal, Blaise, 2252, 1]
[TopLink Finer]: 2008.01.10 10:27:28.748--DatabaseSessionImpl(12916846)--Connection(9550256)--Thread(Thread[main,5,main])--commit transaction
[TopLink Finer]: 2008.01.10 10:27:28.748--UnitOfWork(14858725)--Thread(Thread[main,5,main])--end unit of work commit
[TopLink Finer]: 2008.01.10 10:27:28.748--UnitOfWork(14858725)--Thread(Thread[main,5,main])--release unit of work
[TopLink Finer]: 2008.01.10 10:27:28.748--UnitOfWork(14858725)--Thread(Thread[main,5,main])--release unit of work
[TopLink Finest]: 2008.01.10 10:27:28.748--UnitOfWork(18511661)--Thread(Thread[main,5,main])--Register the object Employee: Blaise Pascal
[TopLink Finest]: 2008.01.10 10:27:28.748--UnitOfWork(18511661)--Thread(Thread[main,5,main])--Execute query DoesExistQuery()
[TopLink Finer]: 2008.01.10 10:28:58.370--UnitOfWork(18511661)--Thread(Thread[main,5,main])--begin unit of work commit
[TopLink Finer]: 2008.01.10 10:28:58.370--DatabaseSessionImpl(12916846)--Connection(9550256)--Thread(Thread[main,5,main])--begin transaction
[TopLink Finest]: 2008.01.10 10:28:58.370--UnitOfWork(18511661)--Thread(Thread[main,5,main])--Execute query UpdateObjectQuery(Employee: Blaise Pascal)
[TopLink Finest]: 2008.01.10 10:28:58.386--UnitOfWork(18511661)--Thread(Thread[main,5,main])--Execute query InsertObjectQuery(PhoneNumber[desk]: (603) 123-4567)
[TopLink Fine]: 2008.01.10 10:28:58.386--DatabaseSessionImpl(12916846)--Connection(9550256)--Thread(Thread[main,5,main])--INSERT INTO PHONE (P_NUMBER, EMP_ID, AREA_CODE, TYPE) VALUES (?, ?, ?, ?)
bind => [1234567, {Employee: Blaise Pascal}, 603, desk]
[TopLink Warning]: 2008.01.10 10:28:58.511--UnitOfWork(18511661)--Thread(Thread[main,5,main])--Local Exception Stack:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Technology Preview 3 (11.1.1.0.0) (Build 071214)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: Ungültiger Spaltentyp Error Code: 17004
the highlighted section should be 1501 (the key of the employee record)
Any ideas how to fix this?
Thanks ErikaErika,
You need to specify the other side of the relationship (on the PhoneNumber side), which is done by putting a @ManyToOne annotation on the "employee" attribute in PhoneNumber. That will cause TopLink to know that it is a relationship and not a basic mapping.
-Mike -
Post Author: Don
CA Forum: Formula
Hello Everyone,
I need some assistance. I have a one to many relationship...
Example...
TABLE 1
FieldName = RecordID
DATA, RecordID= 10
TABLE 2, linked one to many to RecordID in TABLE1
FieldNames = RecordID, Name, ContactType
DATA, RecordID= 10, Name= Tom, ContactType= Sales
DATA, RecordID= 10, Name= Dan, ContactType= Service
DATA, RecordID=10, Name= Jon, ContactType= Sales
What I am looking for is to create a formula that would return something that looks like this....
Sales Contact Name
Tom, Jon
So... I want to grab all the "Contact Types" of "Sales" from TABLE 2 then pass in the "Name" field from TABLE 2 and if there is more then one "Name" of the sames "Contact Type" then comma seperate it.
And... I don't want to do this in a sub report. I do know I can make a sub report and return both values but to my knowledge the values would be on top of one another and not beside each other comma separated.
Ideas?Post Author: Don
CA Forum: Formula
That may work using a subreport...
I think the root of this my problem is the fact I have a table relationship, left outer... one to many join. So even if I drop your suggested formula in my report I still get repeating record details with blank names where all the other contact types would be.
Ticket Number Contact Name Contact Type
111111 Dan, Jim Sales
111111 <---- where the other contact type appear
111111 <---- where the other contact type appear
I was trying to avoid having to create several subreports for each data field I need on the report. However, I think I can use your formula in a subreport to allow the data to display in a comma separated row rather then a vertical list.
I thought about suppressing but that won't work because I have other contact types I need to list.
Thank you for responding. -
Select with One-to-Many and Many-to-One without repeating
Hi
I have a customer who needs a report two sides left and right, but allowing for One-to-Many and Many-to-One relationships in the one report.
A little background:-
This has do do with listings on land and buildings.
One building can be built on a few pieces of land.
Similarly, there can be several buildings on one piece of land.
What is required is a listing of buildings on the left, land on the right, but without repeating the "single line entries" either left or right.
For example Building1 is on Land1 and Land2, and Building2 and Building3 are built on Land3.
We need:-
Building1 Land1
________Land2
Building2 Land3
Building3______
The ___ just used for spacing so you get the idea ;)
Essentially - a "break by" on columns on the left and right.
The Buildings and Land are in different tables, with a link table - one row for each link.
Any ideas?
Thanks
MikeTo jitu.jk - first, this is not in SQL*Plus - its a report in APEX - second, I see no way to break on the left and the right in the same select.
Maybe there is a way.
To Etbin
This is a very inovative solution - I've tried it out and the result is:-
BUILDING LAND
_____Land 4
_____Land 3
_____Land 5
Building 2 Land 4
Building 3 Land 1
_____Land 4
Building 4 Land 4
Building 5 Land 3
_____Land 4
(The underscores I put in for spacing - not perfect but you get the idea - hard whe you write the reply in a fixed space font and it's displayed in the forum in variable space font!! ;)
9 rows selected.
This is not quite the desired result - in your list of associations, we have Building1 associated with Land 3,4, and 5.
So for Building 1 we should have:-
Building 1 Land 3
________Land 4
________Land 5..........
But your result doesn't include Building 1 at all.
The other requirement is that no building or land is ever repeated - so I came up with the concept of "groups".
Starting with one building - I find all pieces of land that are associated - listing them on the right (without repeating the building.
I then find any other buildings asociated with any of the land records that the first building was associated with.
These are listed on the left - without repeating the land records on the right.
This group is given a unique identifier of the minimum association ID (my associations have ID's).
This all done, I use the unique ID as a break column ans summarise additional columns (area, value etc) below each group.
Because of the summaries - adding area and value etc, I can't have any building or land duplicated as I would then "double count" the area, value etc.
Maybe you method can be made to work with some tweaking.
Very clever indeed - forums need great answers like this - it keeps us going.
Thanks again
Mike -
Insert with one-to-many mapping
Hi,
I've got the following situation:
- an object A with a vector of object B
- I defined a one-to-many relation in the descriptor of A referencing a collection of B using indirection through valueHolderInterface, the "private owned" is also checked
- I defined a one-to-one relation in the descriptor of B referencing the object A using indirection through valueHolderInterface
- the bidirectional relationship is maintained.
I try to insert a new object A with a new object B inside. The code is as follows:
A = new A();
B = new B();
// ... set the A attribute values
// ... set the B attribute values
A.addB(B);
UnitOfWork uow = session.acquireUnitOfWork();
uow.registerNewObject(A);
uow.commit();
where addB(b) is as follows:
((java.util.Vector)bvector.getValue()).add(b);
b.setA(this);
Executing this code, the object A is inserted in the database but the object B is not. And I would like that the object B is also stored in the database. Do I really have to register it? I want to make the insert in just one transaction. Have anyone an idea? I tried a lot of different configurations and just one SQL insert order is generated by Toplink.
Thanks,
FrédéricHi Don,
This is with reference to your comments on the following oracel forum query "http://forums.oracle.com/forums/thread.jspa?messageID=508819��" regarding 1:M mapping insertion problem.(Same one)
Actually I also have the same kind of scenario but the data in not getting inserted to the detail table. It always gives ORA-1400 error as it is unable to populate the foreign key of parent in child table.
Can you suggest if I am missing something.
Your quick response will be appreciated.
Message was edited by:
user466708 -
Confused with one to many relationship
Hi Masters ,
Reading about one to many : i came across this
Each row in Table A can have many (zero or more)
matching rows in Table B but each row in Table B
has only one matching row in Table A.
A ZipCode can have many Students but each Student has only
one ZipCode
Theoritically this would be fine but can anyone please make tables for the above so i want to see it pratical work.zip
(zipcode varchar2(6)
, low_street_number varchar2(10)
, high_street_number varchar2(10)
, odd_even char(1)
, city varchar2(30)
, constraint zip_pk primary key (zipcode)
student
(studentno number(10)
, firstname varchar2(30)
, lastname varchar2(30)
, zipcode varchar2(6)
, constraint zip_fk foreign key(zipcode) references zip_pk
Sybrand Bakker
Senior Oracle DBA -
How to create one-to-many form
I have a database that has one-to-many relations. Could
someone give me a good exmaple of how to create a WEB FORM (using
php) that would allow me to for example enter the Name, and then
below ADD as many names of children of this person (each as a
seperate record) as I want, and then sumbit it all together. I have
been strugling with it for a long time, it Access it was so easy,
have no clue how to coded it here. Thank you for anyone;s
response.Get Dreamweaver Developer Toolkit
-
How do you move a file to the trash with ONE keystroke (Can't believe I'm wasting time on this!)
Everytime I want to send a file to the trash, I have to either perform some kind of key combination/shortcut or use the trackpad/mouse, right click and select "move to trash", or drag the file(s) to the trash! This is absolutely ridiculous. Why can't I just press the delete button??? I cannot take it anymore! It's such a waste of time.
After some research, I finally found a post with the answer I was looking for from user par larsson
Re: How delete a file in mac os x?
"You can also go into System Preferences and make a new keyboard shortcut. I turned one of the function keys into a "Move To Trash" key.
1. No need to use the mouse for something that should be simple and quick.
2. Single button press just like in Windows."
Seriously!
Now the problem is how do you do this?
1. I went to the system prefs > Keyboard > Keyboard and checked "use F1, F2, etc... as standard function keys.."
2. Under keyboard shortcuts, I selected "Application Shortcuts" and clicked on the "+" sign
3. I selected the finder application, entered "Move To Trash" in the action box, and F12 as the key (because it's next to "delete")
That did not work. It just opened the dashboard instead.
4. I went back to "keyboard shortcuts" and found F12 was already assigned to open the dashboard. So I unchecked it and tried again.
That still didn't work. I would select the file to be moved to trash, press F12, and after an error "beep" sound, the last file in the folder was highlighted.Duuuuuuuuuuuuuuuuuuuuuuuude!!!!!!!!!!!! YOU DID IT! I cannot believe it!
I changed "Move To Trash" to "Move to Trash" and selected a file. I had lost all hope, so I took a minute to prepare myself for yet another moment of deep frustration. Then I pressed F10, and bang! the file was trashed!!! It took me a couple minutes to actually believe what just happened. Thank you so much! If I could, I would "like" you as many times as I can physically hit the "Liked" button!
PS: what the heck is wrong with Apple though??? Wrong instructions, incorrect help instructions on their own site. The chances of figuring this out before having a nervous breakdown were like one in a million (approximately, I did not actually do the math). Last week, the keyboard and the trackpad stopped responding on my brand new macbook pro for a couple hours. I was not the only one with this problem. Apparently, this was from a design flaw, which means it could happen again at any time. iMovie doesn't work. TextEdit keeps crashing all the time. Emptying the trash can take hours.
Since 2000, I bought a PMac G4 Quicksilver, a used PMac G3 Blue, a used iBook G4, a used Pismo PBook G3, a used Graphite iMac G4, a used iMac G3 (green, 233MHz I think) and I already had more problems with this brand new macbook pro than will all the other macs combined... For such an expensive machine, with 16GB of RAM, that's a little dissapointing, especially from Apple. Maybe I'm just not lucky.
Anyways, thanks again! Best moment of 2014! -
Wrong File(parent, child) behaviour on Windows when child starts with one s
I've sent following problem report:
A DESCRIPTION OF THE PROBLEM :
On Windows when relative path starts from one slash it should be resolved from current disk (not current directory). This behaviour should be preserved for Files constructed with constructor File(parent, child). So results of run "System.out.println(new File(dir, relPath).getAbsolutePath())" and "System.out.println(new File(relPath).getAbsolutePath())" should be identical when running program from directory "dir".
STEPS TO FOLLOW TO REPRODUCE THE PROBLEM :
Compile and run from directory C:\temp\relpath following code:
import java.io.*;
public class Main {
public static void main(String[] args) throws Exception {
System.out.println(new File("C:\\temp\\relpath", "\\temp\\relpath\\Main.java").getAbsolutePath());
System.out.println(new File("\\temp\\relpath\\Main.java").getAbsolutePath());
EXPECTED VERSUS ACTUAL BEHAVIOR :
EXPECTED -
C:\temp\relpath>java Main
C:\temp\relpath\\Main.java
C:\temp\relpath\Main.java
ACTUAL -
C:\temp\relpath>java Main
C:\temp\relpath\temp\relpath\Main.java
C:\temp\relpath\Main.java
The answer was:
I have been analyzing your problem and it is not a bug but the intended behavior of the API.
The File(File,String) constructor includes this in the specification:
"If the |child| pathname string is absolute then it is converted into a relative pathname in a system-dependent way."
In the example provided here, the child path is absolute so it is converted into a relative path. This is the intended behavior.
My comments:
First, child pathname is not absolute. Even so, I don't understand why this guy contend that this behavior is correct.
Please comment this!Please comment this!
I've sent following problem report:
A DESCRIPTION OF THE PROBLEM :
On Windows when relative path starts from one slash
it should be resolved from current disk (not current
directory). This behaviour should be preserved for
Files constructed with constructor File(parent,
child). So results of run "System.out.println(new
File(dir, relPath).getAbsolutePath())" and
"System.out.println(new
File(relPath).getAbsolutePath())" should be identical
when running program from directory "dir".
STEPS TO FOLLOW TO REPRODUCE THE PROBLEM :
Compile and run from directory C:\temp\relpath
following code:
import java.io.*;
public class Main {
public static void main(String[] args) throws
s Exception {
System.out.println(new File("C:\\temp\\relpath",
", "\\temp\\relpath\\Main.java").getAbsolutePath());
System.out.println(new
ew
File("\\temp\\relpath\\Main.java").getAbsolutePath());
EXPECTED VERSUS ACTUAL BEHAVIOR :
EXPECTED -
C:\temp\relpath>java Main
C:\temp\relpath\\Main.java
C:\temp\relpath\Main.java
ACTUAL -
C:\temp\relpath>java Main
C:\temp\relpath\temp\relpath\Main.java
C:\temp\relpath\Main.java
The answer was:
I have been analyzing your problem and it is not a
bug but the intended behavior of the API.
The File(File,String) constructor includes this in
the specification:
"If the |child| pathname string is absolute then it
is converted into a relative pathname in a
system-dependent way."
In the example provided here, the child path is
absolute so it is converted into a relative path.
This is the intended behavior.
My comments:
First, child pathname is not absolute. Even so, I
don't understand why this guy contend that this
behavior is correct.
*/
Maybe you are looking for
-
How do I re-install iMovie when it was pre-installed on the iMac and no disks were in the box?
Hi, I purchased my iMac in August 2011. It came pre-installed with iMovie and other iLife applications. Recently I have had some issues with iMovie (it crashes on start-up) and i came to the conclusion to try a re-install. However as it was pre-insta
-
I just bought OS X Lion and now it says I need to go to the App store and pay even more money to get a newer iPhoto for PhotoStream to work between my iPhone and my computer. Is this a rip off to make us pay more $ or is there another way to update
-
Whats the best way to manipulate data using a Form ??
I have a few forms and basic navigation and data manipulation I find are rubbish - cos I am rubbish at making it any better. I have a customer form (layout style of form) and table, I set up 2 buttons (enter_query & execute_query) to retrieve specifi
-
Documentation of a control or indicator
I was documenting a control and indicator using the Properties->Documentation section. In Labview 8.0, you can add new lines into the Description section. In Labview 8.2, I can no longer add new lines in the area. This function fortunately works in t
-
Premiere Pro CRASH when using .M2TS files
I import the files and put them on the timeline. Everything gets very laggy at this point even though my CPU and RAM aren't sky high. Then it crashes when I'm almost finished rendering. Happens every time with .M2TS files.