MOVED: 785GM-E65 and IOMMU for Xen virtualization

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=135607.0

Or maybe a dead mobo.
Is the Power Supply able to feed a fan for more than 30 minutes ? It can happen the PSU to start up and because of a failure capacitor to shut down itself after 5-10 minutes by it s own.
You ll need to swap mobo ,CPU and PSU to see what happens.RMA the 3 hardware pieces and see what the reseler tells you.
I would recheck the PSU too having in mind the failure even if it looks good.
When you get all back working stay with the multimeter connected and see if there are any spikes when you boot or when you load heavy aplications.
Any overclocking on the machine ?
Have you tryed with the mobo outside of the case on some wooden surface ?

Similar Messages

  • 785gm e65 and ssd

    Hi, i have the msi 785gm-e65 moptherboard and i would like to ask if it supports ssd drives and trim.I am interested in installing an samsung 830 ssd.

    Quote from: Fredrik on 19-January-12, 06:30:30
    A bit off: Does anyone know why they call it IDE mode? Whether a hard disk uses "AHCI" or "IDE" mode it is still usually an IDE sized disk.
    Sorry Fred, it's actual a reffering to the circuitboard on the drive, nothing more.
    In the old days they used to have "smart" controllers and dumb drives.
    Now they have dumb controllers and "smart" drives, as such they moved the electronics to the drive.
    The protocol the drive uses is ATA or AHCI, funny is that RAID isn't a protocol for the drive to use

  • MOVED: MSI 785GM-E65 Voltage Settings for AMD Phenom2 x4 955 BE C3 125w/TDP CPU

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=136371.0

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=136371.0

  • 785GM-E65 and video out

    I am looking for an analog video out solution for this mobo. I bought a VGA to component video cable and that gets me an output with jiberish. I'm aiming for s-video or component. I read that some mobo's support s-video out through the VGA port. Does anyone know if MSI has included this feature on this mobo? I have not found any materials that indicate one way or the other.
    Thanks for the help.

    This board doesn't support that kind of video output. You could get a video card with super video out or get something like this converter.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16815158142&cm_re=vga_to_composite-_-15-158-142-_-Product
    Good luck!

  • MOVED: Sos Voltage Settings on MSI 785GM-E65 Help Help SOS

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=136226.0

    Actually it concerns the Voltages.
    When I installed this CPU in this board everything was AUTO, in Windows the Voltage read 1.4v.
    This 955 Black Editions has Stock Voltages of
    CPU VDD 1.35v
    CPU-NB VDD 1.25v
    HT Link 1.2v.
    However because the BIOS does not output all these voltages in the Right Column as to what they are set to reflecting realtime measures, one has to 'boot' into Window to look at the readout. 
    BIOS Terminology is my main concern so I can set them appropriately to 'stock' first then raise them.
    It seems with this board because it has the several different methods to OC that some voltages cannot be adjusted properly so they are already preset to certain stable measures pre-thinking someone will OC.
    This not good.  Since if the Processor for the CPU VDDC voltage is set high the VCORE get hot quick.
    So, I'm asking for the correct stock voltages for the above for this 955 Black Edition CPU RB-C3 125w/TDP
    on this MSI 785GM-E65 Board.  Don't care about OC at the moment. 
    I need to know from MSI what the stock voltages are for Each Option.
    Lastly, the NB Chipset voltage is set at 1.3v from the Factory along with the HT Link.  When I lower the HT to 1.2 the SB voltage activates and these two move in unison. Which is very uncool and odd.

  • I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    Did you try to change the location  in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?

  • Firefox constantly tells me it is updating to next version, and shows the dots moving, but it goes on for hours and does not download--what should I do?

    Please see above--I don't know a better way to explain it.
    * Mac OS X 10.6
    * Firefox 3.6.13
    This happened
    A few times a week
    This started when...
    A couple of months ago.
    More Information
    Firefox tells me an update is being installed. I see the dots moving. I exit everything else and wait for the update to complete.
    It goes on for several hours showing the dots moving. Apparently, nothing is really happening. I shut the computer down when I go to bed. When I reboot, I see the same thing, and get the same results. I've checked the help database, and the previously asked questions, but can't find anything. Any suggestions?
    Here are my system details:
    Installed Plug-ins
    * Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Java Information.
    * Gecko default plugin
    * iPhoto6
    * Netscape plug-in that plays Rhapsody content
    * Unity Web Player lets you experience dazzling interactive 3D right in your browser. For more information, visit Unity .
    * The Flip4Mac WMV Plugin allows you to view Windows Media content using QuickTime.
    * Adobe Shockwave for Director Netscape plug-in, version 11.0.3
    * DivX Web Player version 2.0.2.39
    * Shockwave Flash 10.1 r102
    * The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
    * 3.0.50106.0
    * Version 1.9.2.1599
    * Google Talk Plugin Video Accelerator version:0.1.43.4
    * Java Plug-In 2 for NPAPI Browsers
    User Agent
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.13) Gecko/20101203 Firefox/3.6.13

    i tried restoring itz saying error occured 2008 :-(

  • I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it show

    I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it shows in LR under folders as the F drive and the little green light is on, but LR is showing only the first 6 files and not the remaining 200 or so. How do I expand the F folder to expose all files?

    I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it shows in LR under folders as the F drive and the little green light is on, but LR is showing only the first 6 files and not the remaining 200 or so. How do I expand the F folder to expose all files?

  • I updated to OS X 10.9.2 and turned on my calendar sync in iCloud, now my calendar is unavailable and shows moving calendar to server acount for 3 days. Not sure how to reset or gain access? Please help!

    I updated to OS X 10.9.2 and turned on Calendar sync in iCloud, now my calendar is unavailable and shows "moving calendars to server account" for 3 days. Not sure how to reset or access calendar. I can only force quit the app and when I restart it, it goes right to the same message. I have also tried turning off the sync in iCloud to no avail. Please help. I need my calendar!

    Try the solution posted by melosaris here: https://discussions.apple.com/message/23475967#23475967.

  • Since moving to Maverick and the new updated of Keynote, I have a constant problem when typing in a text box, the program crashes. Is there a bug fix for this. Drives me nuts.

    Since moving to Maverick and the new updated of Keynote, I have a constant problem when typing in a text box, the program crashes. Is there a bug fix for this. Drives me nuts. Like many who can type quite quickly but at secretarial level, the text box freezes, nothing works and you know what's coming...crash!
    This is most annoying. Is there bug fixes for this. Apparently I have the current updates and this problem still exists. Is it a Maverick bug or Keynote.
    Barry

    How did you install Mavericks, as an update ontop of the previous OS or did you wipe the drive and install clean?

  • Moving Average Price and Total Stock not updated for MTO scenario

    We are using MTO with planning strategy 20, individual collective indicator is 1 (individual requirement only) and price control is V for finished goods. We are facing the following problems after we perform GR of above FG from MFBF (Repetitive -run schedule header):
    1)Total Stock field (LBKUM)in Accounting View 1 remain as blank but the sales order stock is appear in Stock Overview screen.
    2)Moving average price does not updated after periodic settlement is carried out.
    It seem that problem can only be resolved if we change the planing strategy to MTS (ex:40), appreciate that if any of you can provide the solution.
    p/s: on ECC5 system.

    Hi,
    Good morning and greetings,
    The standard SAP says as below
    The Raw Materials should have MAP 'V' and the SFG and FG should have the price control as 'S' basically because the standard costing variant PPC1 uses the sequence of Standard Price as the first update at the time of price update and settlement.
    I presume MFBF is used for Repetitive Manufacturing and not for MTO scenario...Repetitive Manfuacturing is MTS scenario...Goods receipt of production order is normally done through MB31.
    If you still want to use the MAP for FG and SFG then you will have to change the costing variant appropriately to pick the MAP first at the time of goods receipt and settlement.
    Please reward points if found useful.
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • HT4740 i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50

    i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
    I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project  but i dont know what im doing wrong

    masterpieces wrote:
    later moved the events and projects to the FCP events and projects folder .
    Can you explain in detail what you did?
    Do any other shsre destinations complete? If not, do you get the same error message?

  • I have my ACCOUNT in The US, Moved to Chile and wanted to change but since still have US$1.00 in my account can not do it and can't find anything for a buck... What can I do?

    Pls need help I have my ACCOUNT in The US, Moved to Chile and wanted to change but since still have US$1.00 in my account can not do it and can't find anything for a buck... What can I do?

    Changing your iTunes Store country:
    Sign in to the account for the iTunes Store region you'd like to use. If already signed in to an account, from Settings, choose Store and then View Account.
    Tap "Change Country of Region" and follow the on screen process of changing your region. Agree to the terms and conditions for the region if necessary, and then change your billing information.
    This is from http://support.apple.com/kb/HT1311
    If you get an error, then contact: http://www.apple.com/support/itunes/contact/

  • What's that command again for moving a track and the pan automation?

    What's that command again for moving a track and the pan automation together?

    It's not a command but a menu item: "Lock curves to tracks".

  • I have shared my icalendars with family members via icloud and now my calendar on my computer has been stuck saying "Moving calendars to server account" for literally 5 days.  What do I do?

    I have shared my icalendars with family members via icloud and now my calendar on my computer has been stuck saying "Moving calendars to server account" for literally 5 days.  What do I do?

    Hi, Confused As Always CB. 
    Thank you for visiting Apple Support Communities.
    Hopefully I can help resolve this issue for you.  Try removing the preference to sync calendar events in iCloud preferences.  Once this is down enable the preference again and see if this resolves the issue.
    Turn iCloud Calendars off and back on:
    Quit Calendar (or iCal).
    Choose Apple () menu > System Preferences, then select iCloud.
    Deselect the checkbox next to Calendars.
    Close System Preferences and wait about a minute.
    Open System Preferences and select iCloud.
    Replace the checkmark next to Calendars.
    Close System Preferences.
    Open Calendar (or iCal) and test to see if the issue is resolved.
    Restart your computer. This may sound simple, but it reinitializes your network and application settings and can frequently resolve issues.
    If the issue persists, try all remaining steps in the article below.
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/TS3999
    Regards,
    Jason H.

Maybe you are looking for