MOVED: [865PE/G Neo2 Series] Desperation - Help O/C 865PE-NEO2-LS w/2.8Ghz P4 Northwood - Just won't go

This topic has been moved to Overclockers & Modding Corner.
[865PE/G Neo2 Series] Desperation - Help O/C 865PE-NEO2-LS w/2.8Ghz P4 Northwood - Just won't go

This topic has been moved to Overclockers & Modding Corner.
[865PE/G Neo2 Series] Desperation - Help O/C 865PE-NEO2-LS w/2.8Ghz P4 Northwood - Just won't go

Similar Messages

  • Help! - Can't re-install Tiger, Panther etc.. Just won't start up -

    I have erase my hard drive and tried to re-install Tiger. It successfully installed the 1st time, but every time I tried update, software update quit, and then safari quit when i tried to download the updates manually. Shortly afterwards the Powerbook froze.
    I have tried to reinstall Tiger - then Panther from my original system disks - The hardware test says all is fine. The drive shows to install - but can't find a drive following installation.
    Any ideas?

    RAM failure can lead to kernel panics, unexpected quits, more spinning beachballs than you would expect for specific kinds of processes, and it can potentially cause problems with software installation. Note, if a hardware test reveals bad RAM you can believe it. You can't though believe a hardware test when it says the RAM is healthy, as bad bits can't all be tested in the known age of the universe.

  • P35 Platinum & P35 Neo2 Series

    beta BIOS for P35 Platinum & P35 Neo2 Series(MS-7345, PCB 1.1) ver V1.4B3:
    BIOS Sign-on message: A7345IMS V1.4B3 083107 (Date: 08/31/2007)
    Attachment name: P35 Platinum and P35 Neo2 Series 1.4B3.zip
    Make and ensure PC is stable before proceed. flash BIOS from USB key, by using our Tool(easy & safe way to flash):
    MSI Forum HQ USB Flashing Tool 
    Use Beta or Modded BIOSes at own risk!
    Feeback are Welcome!!! Thanks!!

    Quote from: Jack the Newbie on 25-September-07, 04:00:50
    A new BETA has just surfaced in the German MSI Forum: A7235IMS.151 (09/21/07).
    For anyone interested, here is a Link to the BIOS (use at your own risk!):
    http://msi-forum.de/thread.php?threadid=31968&threadview=1&hilight=&hilightuser=0&page=3#post281405
    Changelog will follow shortly.  The admin did not find the time yet.
    The changelog did not follow that shortly after all, but it goes like this:
    Quote
    Fix some DDR can not boot issue
    There seems to be a new beta (1.5b2) around. Unfortunately I don't have a link to it, but here is the changelog:
    Quote
    Fix Smart FAN Fail from S3 wake up issue
    Here it the Link to BIOS 1.52 BETA.  The BIOS was just uploaded.  Use it at your own risk!!
    http://www.msi-forum.de/thread.php?threadid=31968&threadview=1&hilight=&hilightuser=0&page=4#post283564

  • Can't install C:\AS10gNT_Disk1 on windows-desperated--Help .

    Can't install C:\AS10gNT_Disk1 on windows-desperated--Help .
    hello forum it seems as if i have miss understood something about installing C:\AS10gNT_Disk1,2,3.
    1: i have unziped all the 3 zip files in there respectivelly folders.
    for examples.C:\AS10gNT_Disk1\Disk1.
    i have oracle 9is db installed on my pc,
    so in a previous maill somebody adviced me, plus the installation errors showed me that i could't installed it in C:\oracle\ora92 witch is where I have oracle9is db installed.
    Then I was told that I could just give any new oracle_home and path.
    but this is not working for me.
    when I run oracle universal installation.
    destination.Then
    Enter or select an oracle home name and its full path.
    as i have to enter a different name from my previous one where oracle9isdb is installed,
    then I write
    name oracleServer,
    path c:\oracleServer when i do that i get the following errors.
    There was a problem in accesing the staging area.
    Pleased make sure the specified values for source and destiantion are valid

    Hi,
    actually I can only tell how it worked for me. I unzipped all zips into teh same directory and ended up with
    d:\stage\disk1
    d:\stage\disk2
    d:\stage\disk3
    Then I started the installer from disk 1 and follwoed all teh instructions. I did specify an Oracle Home as OracleAsInfra for the infrastructure to be in d:\OracleAsInfra and similar for teh Midtier OracleAsMidtier to be in d:\OracleAsMidtier
    The rest ran smoothly
    Frank

  • [Athlon64] HyperX and Neo2 Series Compatibility?

    Hey, I recently got a 1gb set of PC3200(KHX3200AK2/1G)  for my K8T Neo2 Series Board and they don't work.  The system stops at early chipset initialization.  I talked to Kingston and MSI, hey both gave me things to try; changing the CAS latency to 3, Enabling the IT timing; and still no luck. They both said they should work.  Any ideas or things I'm doing wrong?  Cheers
    System- VIA K8T800 Pro Chipset Based- K8T Neo 2 series
              - AMD 64 3000+
              - 512 PC3200 400mhz Kingston  (trying to get the hyperx to work)
              - ATI 9550 AGP Graphics Card

    https://forum-en.msi.com/index.php?topic=84584.0
    https://forum-en.msi.com/index.php?topic=84599.msg603441#msg603441
    https://forum-en.msi.com/index.php?topic=88896.0
    Sticky posts contain a lot of superb info. One only has to click and read...

  • Msi 865 neo2 series - only green or blue light work constantly

    msi 865 neo2 series - only green or blue light work constantly or no light at all on the NB MSI's light fan....
    and the pc stucks in different places
    what does it mean ?

    Hi, we simply need more info from you on your system to narrow down the problems. Please simply post your full system specs and full PSU specs for us.
    All the Best... :D!!!

  • Creative M series 30GB help

    C? I have 2 of these units and I'm about to smash both of them into 000 pieces and buy something else.
    One of them was working fine and the other one was just clicking when plugged into the USB. Would not turn on and I tried the resets.
    I took the clicking one apart, unplugged the ribbon cables, and put it back together and it came back on without any of my stuff on there as if it were new. This was fine, but when I plugged it into the USB it did not recognize. I tried the repair tool on the Creative site and it won't recognize the unit, so it won't give me any feedback on repair.
    For some reason, I decided to plug in the working unit to "upgrade the firmware". I figured Why not? Well, after going through a bunch of stuff now that one is frozen and says"Firmware Problem". Tried to reset it and it goes back to "Firmware Problem" and it will not be recognized either.
    Any ideas?

    Re: Creative M series 30GB help?
    creativePOS wrote:
    I have 2 of these units and I'm about to smash both of them into 000 pieces and buy something else.
    One of them was working fine and the other one was just clicking when plugged into the USB. Would not turn on and I tried the resets.
    I took the clicking one apart, unplugged the ribbon cables, and put it back together and it came back on without any of my stuff on there as if it were new. This was fine, but when I plugged it into the USB it did not recognize. I tried the repair tool on the Creative site and it won't recognize the unit, so it won't give me any feedback on repair.
    For some reason, I decided to plug in the working unit to "upgrade the firmware". I figured Why not? Well, after going through a bunch of stuff now that one is frozen and says"Firmware Problem". Tried to reset it and it goes back to "Firmware Problem" and it will not be recognized either.
    Any ideas?
    Well what O.S.,SP,version of Windows Media Player are you using? Did the firmware update file recognize the device when you executed the file?

  • K8T Neo2 Series bios v3.2 released

    MSI has posted bios version 3.2 for the K8T Neo2 series of boards.
    Update description:-
    -Support USB devices under DOS mode.
    -Update CPU Microcode (3000+, 3200+, 3500+)
    -BIOS reported incorrect CPU temperature.

    Hi
    Had opposite prob.
    ATI radeon is iffy, so I was configing it, there are 2 settings in AGP 66 and 75 MHZ, mine works on 66 by ' default', but if I try 75Mhz, its a reset cmos jumper job.  I assumed the monitor driver is at 66Mhz, and that was the root of problem, as Monitor runs on 4 rigs, have not bothered altering display settings.
    cheers
    jocko

  • Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him mine. Want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address.

    Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
    Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!

    Hey Fagen!
    You will want to see the following article for guidance on achieving the result you wish to achieve:
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5661
    I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • My ipad just won't let me enter my apple password on FaceTime or iMessage, it works fine on my iPhone, I have tried numerous things but nothing works, can anybody help please, will a bug fix sort this out when they finally make one

    My ipad just won't let me sign in with my apple password on FaceTime or iMessage since updating to ios7 it says check my network connection, even though my iPhone works fine with the same password, can anybody help please, I have tried numerous things but nothing  works.  Will I have to wait for a bug fix to sort this? I hear they are working on one a the minute, I hate ios7

    Try a Restart.
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
    Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
    Here is a link to their contacts with most of the information below.
    http://www.apple.com/contact/

  • I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

    I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

    Go to Settings > Privacy > Location Services.
    Turn off SnapChat.
    Go to Settings > Notification Center
    Turn off SnapChat.
    Restart the device.
    Go to Settings > Privacy > Location Services.
    Turn on SnapChat.
    Go to Settings > Notification Center
    Turn on SnapChat.
    Test the issue.

  • HT204266 I erase all application of my iphone 4 with erase restore and now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file i just want my i phone ok and work smoothly as new p

    Hi,
    I erase all application of my iphone 4 with erase restore without any backup & i also lose the product serial number. Now it's in restore mode. Now is there any way to restore my iphone without backup. Please help me. I have no need my previous file I just want my iphone4 ok and work smoothly as like new ipone justlike i bought it at first time. I can't restore it. So Please help me to solv this proble.

    See Here  > without the Backup  >  http://support.apple.com/kb/HT4137

  • My ipod shuffle 1st generation won't restore. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?

    So it's the little thin ipod with no screen...that has the usb thing and the landyard. Whenever I try restoring it it tries to restore and then a message pops up. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?. I have literally tried restoring it like 10 times and nothing happens. When i connect headphones it does not hear and that little light think happens....which i had never seen happen before. I need to fix it. ....please help....if i take it to an apple store....will it cost alot to fix that?

    reset utility should help...for mac
    http://www.apple.com/support/downloads/ipodresetutility103formac.html
    for windows
    http://www.apple.com/support/downloads/ipodresetutility104forwindows.html

  • TS1702 My iPod Touch 4th generation just won't download apps. I have tried everything I can think of. Please help!

    My iPod Touch 4th generation just won't download apps. I have tried everything I can think of. Please help!

    Hi, when you say you have tried everything... I presume you have gone into Settings > Store and logged out and back in with your account details?
    You could try purchasing an app via iTunes to see if its an issue with the device or the account you're using.
    Hope this helps.

  • I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

    I am not able to open my 'system preferences' it shows up on top, but the window just won't open. I haven't installed anything new, I have also restarted my computer, but still encounter this problem. Help?

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

Maybe you are looking for