MOVED: 975x PUE and Vista start up problem

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=108609.0

Hello mscott48, From your description, it appears that Vista may have become corrupted.
I'm surprised it lasted as long as it did before becoming corrupted.
If this is the case, you would beed to perform a clean install of Vista to resolve the issue.
I'm not sure if your system will boot from a USB device, but if it will, you would need to enter the BIOS and make sure the first device is set to a USB device and then try and boot the Vista DVD from your external DVD drive.
This may create issues with the boot loader for your Linux distro, and if it does, you would have to deal with that as well.
Just some thoughts.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Similar Messages

HT1430 My ipad2 shut down randomly and than start. Problem is remain after reset. Please help!

My ipad2 shut down randomly and than start. Problem is remain after reset. What is the solution.

You can try restoring your iPad as new using iTunes on your computer. This will load a new copy of the iOS software onto your iPad.
If this doesn't work you may have a hardware problem and will need to contact Apple Support.

Airport Extreme, Airdisk, and Vista - large file problem with a twist

Hi all,
I'm having a problem moving large-ish files to an external drive attached to my Airport Extreme SOMETIMES. Let me explain.
My system - Macbook Pro, 4gb ram, 10gb free HD space on macbook, running latest updates for mac and vista, external hard drive on AE is an internal WD in an enclosure w/ 25gb free (its formatted for pc, but I've used it directly connected to multiple computers, mac and pc, without fail), AE is using firmware 7.3.2, and im only allowing 802.11n. The problem occurs on the Vista side - havent checked the mac side yet.
The Good - I have bit torrents set up, using utorrent, to automatically copy files over to my airdisk once they've completed. This works flawlessly. If i connect the hard drive directly to my laptop (macbook running bootcamp w/ vista, all updates applied), large files copy over without a hitch as well.
The Bad - For the past couple weeks (could be longer, but I've just noticed it recently being a problem - is that a firmware problem clue?) If i download the files to my Vista desktop and copy them over manually, the copy just sits for a while and eventually fails with a "try again" error. If i try to copy any file over 300mb, the same error occurs.
What I've tried - well, not a lot. The first thing i did was to make sure my hard drive was error free, and worked when physically connected - it is and it did. I've read a few posts about formatting the drive for mac, but this really isnt a good option for me since all of my music is on this drive, and itunes pulls from it (which also works without a problem). I do however get the hang in itunes if i try to import large files (movies). I've also read about trying to go back to an earlier AE firmware, but the posts were outdated. I can try the mac side and see if large files move over, but again, i prefer to do this in windows vista.
this is my first post, so im sure im leaving out vital info. If anyone wants to take a stab at helping, I'd love to discuss. Thanks in advance.

Hello,
Just noticed the other day that I am having the same problem. I have two Vista machines attached to TC w/ a Western Digital 500 gig USB'd. I can write to the TC (any file size) with no problem, however I cannot write larger files to my attached WD drive. I can write smaller folders of music and such, but I cannot back up larger video files. Yet, if I directly attach the drive to my laptop I can copy over the files, no problem. I could not find any setting in the Airport Utility with regards to file size limits or anything of the like. Any help on this would be much appreciated.

Time Capsule and Vista (HD connection problem)

Hi, I've read all posts with lots of people trying to use TC and Vista, tried all suggestions, but still stuck.
The "router" part is working great, I have TC connected to my desktop (Vista Ultimate 32bits) wired, and wireless working fine.
But for some reason I can't connect to TC HD. it says I have to enable NETBIOS. I already did this (properties on tcp/ip), but no luck.
any other suggestion?
tks.

Hi All, just to contribute here my solution for this.
after making sure the computer browser services was up, I opened the networking and sharing center, clicked on the "view status" of the connection, and then on the "properties" in the new window that opened.
Then I added 3 things there (was not there by default, don't know)
+ Link Layer Topolgy Discover Mapper I/O Driver
+ Link Layer Topology Discover Responder
+ Client for Microsoft Networks
After that, worked like a charm. Now I'm trying to use TC with Account Access, w/o success (if I put disk password goes fine).
hope this helps

Windows Vista start-up problem

Please help!!! I have hp pavilion p6152f with vista 64-bit. I used windows 7 upgrade program to upgrade to windows 7. After several OS freezing i decided to recover to Vista using hard drive partition. So i did it but vista never started. I am unable to run it. I haven't any access to safe mode. It redirects me to startup repair but it is unable to repair computer automatically ant it give me that:
Problem Event Name: StartupRepairV2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6001.18000.6.0.6001.18000
Problem Signature 03: 5
Problem Signature 04: 196611
Problem Signature 05: CorruptRegistry
Problem Signature 06: CorruptRegistry
Problem Signature 07: 2
Problem Signature 08: 3
Problem Signature 09: RollbackRegistry
Problem Signature 10: 0
OS Version: 6.0.6001.2.1.0.256.1
locale ID: 1033
so please help

Hi,
This process will allow you to make a Vista Repair Disc. This is not an installation disc but will allow you to use the Vista Recovery Console that is available on retail versions of Vista.
Download the file on the link below.
Vista 64 bit
This is a zipped file. If you don't have an extraction utility installed, download and install 7-Zip which can be used to open this file. Simply right click the zipped file, select 7-Zip, select Extract Files and then click Ok. You should now see another folder containing the ISO file.
You will need software to burn the ISO to a CD. If you don't have this type on software installed, download and install ImgBurn and use this to burn the ISO to a CD.
Once you have created the Vista Repair Disc, follow the guide on the link below to see if this will repair your installation. If the initial startup repair doesn't work, try running windows System Restore from the Advanced Options as this may correct the registry corruption.
http://www.bleepingcomputer.com/tutorials/tutorial148.html#
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

MOVED: K9A2 platinum and Vista x64 unsigned drivers

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=114418.0

Quote from: Fredrik Åsenius on 06-April-08, 02:55:35
No, that is not what I said. VistaX64 supports a lot of memory. Remember you have also a lot of memory on the video card. Your configuration might not, if the combination of the four sticks - of two different models - makes the system freeze.
Mixing memory is never good because it makes things harder for the processor (and it's memory controller).
You could still try reducing the speed of the memory, and/or increase the memory voltage a little bit.
I have 4 same memory moduls. I didn't mix modules. I just say, that same happens with my OLD 4 memory moduls(worked fine in my old motherboard Asus m2n-e sli), and with my new 4(exact same) modules.
Memory is on default speed....btw. These memory modules are DDR2-1066, but running on 800. Where should I lower speed more?

MOVED: MSI P35 Platinum + Vista x64, weird problems (random lockups) + unable to update

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=111652.0

Quote from: AaronYuri on 22-November-07, 03:28:52
Well it's simple. Use the BIOS that works best for you. Anyone here will tell you that.
Yeah, I didn't think on that...
Quote from: AaronYuri on 22-November-07, 03:28:52
This is a User-to-user Forum. You will find no MSI employees here.
It's really a shame, because the domain is from MSI, the forum use official MSI brand, the host is payed by MSI, so any moderator here is representing indirectly the company and MSI is responsible of all the forum content and his representatives.
Quote from: AaronYuri on 22-November-07, 03:28:52
EDIT: Just so you know, MSI don't go for bleeding edge. MSI go for the server and OEM market, where there is more money to be had. Asus, Gigabyte and DFI target the ethusiast market. But as ethusiasts only make up <5% of the market, your opinion won't sway that many.
Yes, you're right! Like any customer here I'm no one and nobody gives a about my opnion and my money wasted on a MSI product because the company only gives a on OEM market!
Wonderful tought! God bless you soul and from MSI.
I'll need it because only money it's the important, the company image not. Isn't that right?
Quote from: AaronYuri on 22-November-07, 03:28:52
But as for the rest, it's down to your opinion. I recommend all my customers MSI hardware, because you get quality support (this forum) and a fast & friendly RMA service.
A company is as good as it's support.
Wonderful support.
I imagine if I am a president of a big brazilian PC manufacturer, because the sells of computers in Brazil in that year beats any market in world, and then I see all this bullshit happening from MSI side, then I turn my attention on Gigabyte or Asus (they too act on OEM market and give more attention to your customers).

MOVED: K9A Platinum and Vista 64 issues

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=109584.0

Quote from: Paul B on 20-March-08, 23:05:39
Hi all,
Ok so I said I'd report back once all working and here i am (touches wood )
So my system is now Phenom less, I'm a bit gutted it's going back for RMA for refund. I have in the mean time replaced it with an x2 5000+ BE.
So just a recap on my spec
K9a2 Platinum
x2 5000+ BE Running stock 2.6Ghz
8GB OCZ DDR2 800 Platinum
2 x 3870x2 in crossfire X mode.
Windows Vista x64 OEM
This OS now installed no issues no BSOD for secondary clock interrupt. But i did have issues installing it on the Promise raid array. Though it was the old more than 2GB ram thing so did the install with one stick and then Patch vista install the other 6GB but no still got system rebooting after the progress bar 9 times out of 10.
So i have the HDDs on the standard SB600 sata ports as individual drives, installed x64 all 8GB still installed. Not knowing yet if it was driver related I let vista install all the drivers, the only other driver my system needed were the cat 8.3s and I only installed the graphics driver and CCC not the IDE or north bridge filter as the system is using vistas default drivers.
I have installed all updates and everything seems rock solid. (touches more wood!!) I have spent the last week relentlessly trying to get this OS installed, but hey I learnt a few things along the way..
Paul
But now it is and I have my 8GB and crossfire X I'm happy and when the good Phenoms arrive I'll get one but I'll read all the reviews on the web first....
Hi,
Right then resurecting an oldish thread, I have just purchased a Phenom 9750 and installed with the new 1.4 bios, and all is well. The same Vista x64 install is rock solid and damn quick now.
Buy the B3 Phenoms with confidence they (AMD) have pulled back some ground and in my case some confidence.
Paul

Iphoto and aperture start up problem with Yosemite

Just found out that after installing Yosemite, both my iPhoto and aperture library took very long in order to show up contents after start up. Not sure what causes the delay, does anyone else experience the same problem? For reference, I am using late 2013 15" Macbook pro.

In the case of Aperture you can open the Activity window and check what Aperture is doing.
From Aperture's main menu bar: Window > Show Activity
When Aperture launched the first time, I saw the following activities, that took a noticable amount of time:
Importing iCloud photos
Scanning faces
Rendering previews for iCloud videos.

Xboard 61 and Vista x64 driver problems

I cannot install the driver for my Xboard 61 without this happening. I've done the following:
-run as administrator
-changed the integrity setting to "ON" using BCDEDIT
-run driver setup in an unpacked driver application folder
-checked to see that emuumidi.sys is installed in system32 folder
-re-checked to see that the same Xboard works on my extant XP x32 system (and it does)
I'm at a loss for what to do. Emu has email support now and its hasn't provided any answers.
Here is a copy of what happens to my system. Any suggestions are welcome.
"Creative Device Driver Installation Program has stopped working."
Problem signature:
Problem Event Name: APPCRASH
Application Name: ctzapxx.exe
Application Version: 0.81.2.256
Application Timestamp: 45f79285
Fault Module Name: StackHash_0e2d
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549d372
Exception Code: c0000374
Exception Offset: 00000000000c87b7
OS Version: 6.0.6000.2.0.0.768.2
Locale ID: 1033
Additional Information 1: 0e2d
Additional Information 2: 543715ab55e3b1a278bfe6a23c62098f
Additional Information 3: 714e
Additional Information 4: 4310375efff8b83f31abee24c8585510

Do you have vista service pack 1 installed? That will do it, I think. http://www.microsoft.com/downloads/details.aspx?FamilyId=C21C3978-3B7D-4D64-873B-3C9D26982D7A&displa...
If the link doesn't work, search the microsoft site for update KB936330 (x64 version).
I had many driver problems with all kinds of hardware on my computer with vista x32. I downloaded SP1 (but for x32 version) and all those problems were solved.

MOVED: 975x PUE & Bios version 7.8

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=118396.0

Quote from: Jack the Newbie on 17-March-07, 09:50:15
Larry Carter, can you provide system specs for users to be able to compare?
What is the amount of memory usable to the system (according to BIOS and according to XP/Vista)?
It now displays all of the 4Gigs durning post test and it shows all 4Gigs in Vista. I'm just tickled that Crossfire works with 4Plus Gigs :D I'm running vista HP X64

Satellite X200-252 and Vista sound mixer problem

Hi,
My Satellite X200-252 is running under Vista Home Premium operating system.
I have strange problem with sound mixer. After (I think) some security patches applied my vista stopped from recognizing the sound device.
The taskbar sound icon on the right side of the screen is marked with red cross and while im clicking the icon the info-window states that there is no sound device connected.
When I select the properties, I see all 3 output devices, i.e. internal speakers, hdmi and digital output. However no icon is displayed in the window. But the configuration is working.
Moreover the keyboard shortcuts as well as touchpad works as expected. I mean I can mute/unmute etc..
But I can not change the volumes per channel. For this I need the mixer app.
What I can do to repair my comp?
/Arek

Hi
In your case I would recommend reinstalling the sound driver.
As far as I know this notebook supports an Realtek sound card.
You could visit the Realtek website and could download the sound driver directly from this page.
You need an HD sound driver.
Greets

MSI 975X PUE + MSI StarHub 7-port USB 2.0 + Windows XP SP3 = Fail

Hi,
today I bought a MSI StarHub and connected it to my computer with MSI 975X PUE and Win XP SP3. But XP does not recognize the hub. On the same computer I have Win 7 installed. There the hub works very well. Any hints to get the hub working on XP? I have same problems with my mouse, logitech G500. It works on WIN 7 and does not work on XP. What can I do?
Regards

There was no driver for the StarHub included and I did not find a driver to download on the msi homepage. When running Win7 the hub is shown as Generic USB Device in the device manager on xp it is a USB 2.0 HUB [mtt] and I do not have the driver for this.
I installed the logitech G500 driver on both, win xp and win 7, but xp does not recognize it.

Whenever I truy to load a picture or video file, it will stall until I start moving the mouse around. When I stop moving the mouse, it stalls again. I am running Firefox 4.0.1 and Vista

Any picture or video file I try to load just stalls (with the exception of sound which works OK). I move the mouse and it plays or loads. I stop moving the mouse it stalls again.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

One year later, I still have problems with the 975X PUE

A year ago, I bought the 975X PUE board and turned out to be one of the biggest mistakes I've ever made when purchasing something computer-related.
To start with, the board didn't recognize the OCZ memory that I had bought, so I had to change it for some gSkill memory. That, however, involved a trip to Argentina since at the time it was very hard to get DDR2 memory @ 800 Mhz here in Uruguay. I had also complained about how the temperature monitor was unreliable and problems booting the computer.
I still have those problems, but I learned to live with it since no major problems arised. Sure, I'd have to boot three to six times just to get it running, but hey, no big deal.
Later, I decided to go for RAID1 and surprisingly, it worked so I had no new complaints.
However, lately something new has been happening. The computer seems to reboot randomly and without warning. This had happened before when lightning struck nearby (I blamed it on electro magnetic something) but now it happens all the time and I can't find a solution. I leave the computer on during the night and in the mornings, I come to find that it has rebooted when I was sleeping.
Here's what I have:
MSI 975X PUE (7.1083006)
INTEL E6600
GSKILL 4 GB DDR2 800 Mhz RAM
WD 320 GB 7200 RPM
2x WD 500 GB 7200 RPM (RAID1)
NVIDIA 8800 GTS
Windows Vista 32 bit
PSU Biswal 780W 30A +12V
I've looked over the latest firmware thread that used to be a sticky on here and noticed that everything else seems to be beta. MSI never released something better for this board? Here's that thread: https://forum-en.msi.com/index.php?topic=99818.0
The only thing that I could think of for these random reboots is that maybe the unreliable temperature sensors fool the computer and make it seem like the CPU is a lot hotter than it actually is. I've fired up Everest and right now, with only Firefox and a couple of IM clients running, CPUs are at 50 and 54 degrees celcius. Taking into account that the case is open and I'm in an air conditioned room set to 24 degrees celcius and that there's a mini Typhoon on top of the E6600 as well as a couple of fans in the case, these CPU temperatures are nearly impossible.
What's going on with this? Can anyone help me out?

Quote from: daiver on 04-January-08, 21:59:50
Ok, lets say my PSU is degraded. That solves my spontaneous rebooting issue. How about everything else?
I still have to boot my PC 3-6 times to get it to start. Temperature monitor still sucks as well.
Is 7.1 the latest official firmware for this high-priced mobo?
Daiver the biswall brand is a very cheap one, I think you should buy a trusted PSU. In Argentina you can find many brands, like Topower and Power Cooler, that are good PSUs and at a fair price.
The latest bios for this mother is 7.7, but some users find it not so good as 7.6. I use 7.6 and works perfect.

MOVED: 975x PUE and Vista start up problem

Similar Messages

Maybe you are looking for