MOVED: A75MA-G55 - "Lab Burst Mode"?

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=153182.0

I checked the changelogs for the standard BIOS release series of the A75MA-G55. There are two references to "Lab Burst Mode".
The first appears in the changelog for the E7696AMS.138 [v1.3b8] release:
- Change setup item "Enhanced Spread Spectrum" to "Lab Burst Mode".
The second reference appears in the changelog for the E7696AMS.139 [v1.3b9] release:
- Fixed Lab Burst Mode always enable when OC more than 133Mhz successful then load default.
That tells us three things:
1) The option should be available be available in the E7696AMS.130 final release under the name "Lab Burst Mode" and as "Enhanced Spread Spectrum" in all final releases before that.
2) The "old name" for that option suggests that it has to do with "clock modulation" (because that is what Spread Spectrum generally does).
3) Spread Spectrum probably may need to be enabled first in order to get access to the "Lab Burst Mode"/"Enhanced Spread Spectrum" option.

Similar Messages

A75MA-G55: Lab Burst Mode temp sensor bug

Me and a friend were on a quest to find the best BLK frequency on stock voltage and finally arrived on 153MHz to be the max possible on stock voltage.
We went some benchmarking on 7-zip, GTA4 and wPrime without problems, only we can't measure the cpu core temperature because of that no software can't give us an honest result.
Then our heads came up with an idea, howbout 2hours Prime95 then quick reboot and check temps from Bios.
2 hours later quick reboot, enter bios and there we almost passed out... CPU temperature: 128 degrees Celsius but case temp on 27degrees C.
We left the system off for 3 hours then checked again from a cold boot, 128 degrees C again! then we changed to default settings and there we go 25 degrees C, we switched back to LabBurstMode and temperature showed us again 128 degrees C.
Maybe this was a planned Helloween trick from the MSI team But this have to be looked at.
System:
2x A8-3850 chips
2x 1866MHz Kingston 4GB
2x 1600MHz OCZ Gold 2GB
MSI A75MA-G55
Asrock A75Pro4-M
500GB WD Black
2x 500GB WD Green
Corsair TX650

I checked the changelogs for the standard BIOS release series of the A75MA-G55. There are two references to "Lab Burst Mode".
The first appears in the changelog for the E7696AMS.138 [v1.3b8] release:
- Change setup item "Enhanced Spread Spectrum" to "Lab Burst Mode".
The second reference appears in the changelog for the E7696AMS.139 [v1.3b9] release:
- Fixed Lab Burst Mode always enable when OC more than 133Mhz successful then load default.
That tells us three things:
1) The option should be available be available in the E7696AMS.130 final release under the name "Lab Burst Mode" and as "Enhanced Spread Spectrum" in all final releases before that.
2) The "old name" for that option suggests that it has to do with "clock modulation" (because that is what Spread Spectrum generally does).
3) Spread Spectrum probably may need to be enabled first in order to get access to the "Lab Burst Mode"/"Enhanced Spread Spectrum" option.

MOVED: A75MA-G55 and memory Problem

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=152324.0

1866 is a multiplication of something. Do not set it to 1866!!
I do not know your motherboard, but your processor would probably like something that add up to 1333 MHz.

MOVED: A75MA-G55 oc genie 2

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=152929.0

Geez... You Too?
Plus RAID issues
Plus Crossfire issues
This is my first new build in a while.
MY initial overclocking experience involved a #2 pencil and a 750mhz AMD Duron,
after that it was more like microsurgery with magnified optics, soldering traces.
I haven't done much since AGP got phased out by PCI.
What sounded like, in the initial reviews, to be a Board "Sent by the Gods"
I bit... I bought...
and now I'm finding that there is no documentation anywhere on
initializing any of the features that I bought it for in the 1st place.
Sure, I can Convert(x) 2 .avi movies per DVD in 20 minutes instead of 2 hours...
But I'm walking around feeling like I just PAID to be a BETA Tester.
LiveUpdate5 keeps telling me "Your Drivers are current, You have nothing to update'
When I KNOW there are more current point releases. I've SEEN them.
I make $10 an hour... after taxes and child-support payments, that leaves $195 a week.
Any ideas on How Long you have subsist on Ramen Noodles and multi-vitamins to do this?
I've got about a month's pay sunk into this system
New Coolermaster HAF case w/ 200mm red led fans
It Looks good... It LOOKS like it wants to run
4G of 1600 mhz Corsair VENGEANCE RAM
and another 4G in reserve for Win7 (current XP)
MSI R6670 Graphics Card
a Terabyte of Fresh Barracuda's...Raid 0 would SO pump out those GB/s
Half the frustration was that my 1st 7696 had a bad RAM slot #2
5 hour round-trip to MICROCENTER on public transportation- THREE TIMES
only to find out that it WASN'T the RAM being quirky.
Once I figure this thing out...and I will figure it out
I'll post my findings.
I just don't get it though...
in the reviews... snip, snap, plug, power... bada-bing bada-boom
... HUMMING!!!
and I wonder if I'm too stupid or too smart to solve the problem.
I'll be in touch

MOVED: A75MA G55 default memory frequency

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=152729.0

yes that's true. memory doesnt support jedec at higher level than 666 Mhz. just XPM is 1k MHz
It is not such a big problem to owerlock the memory to get it work on that frequency, but more, what i dont understand is, why i cannot get change the NB frequency to this 993Mhz.
I tried to overlock it also, i have movedl bus speed to higher level, but also max cannot give me this number and of course computer is than very unstable ( problems to start etc. )
I would like to have this overlocked frequency supported also by mobo and CPU and it looks like i'm not able to get it in any way :D or better :(
maybe im missing some point here.

MOVED: A75MA-G55 UEFI boot entries disappear

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=153411.0

Quote from: flobelix on 14-April-13, 04:12:52
And boot order is set to boot from SSD?
Yes, but it forces it to boot to EFI Shell. When I press F10 on startup there is no other option to boot from than EFI Shell. I had this mobo working for about month and half with Windows 8 without any problems. Now after I flashed it to v 2.0 (Which is not reverse downgradeable to older 1.xx version) whole system started to act strange, display resolution can not be set properly, sound card stopped working. I wonder if its really final or only unstable beta version of this bios file.

MOVED: A75MA-G55 Static-y, echo-y audio output from local files

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=156801.0

fuser -v /dev/snd/* when chrome is playing an mp3
UTENTE PID ACCESSO COMANDO
/dev/snd/controlC0: gigitsu F.... pulseaudio
/dev/snd/controlC1: gigitsu F.... pulseaudio
/dev/snd/controlC2: gigitsu F.... pulseaudio
/dev/snd/pcmC0D0p: gigitsu F...m chrome
/dev/snd/timer: gigitsu f.... chrome
/etc/pulse/default.pa without comments
.nofail
.fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
load-module module-detect
.endif
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
load-module module-position-event-sounds
load-module module-filter-heuristics
load-module module-filter-apply
And i've not altered /usr/share/alsa/alsa.conf.
libflashsupport-pulse did not work, I've killed and started pulseaudio but nothing. I did not even flashplugin

BETA UEFI Releases for the A75MA-G55 [MS-7696 PCB v1.0]

I am uploading the latest BETA Release for the A75MA-G55 [MS-7696 PCB v1.0] mainboard.
Currently, the latest version is E7696AMS.13A [=v1.3b10].
E7696AMS.120 ---> E7696AMS.13A
- Fix ps2 kb/mouse issue when WHQL test.
- Update Llano-AGESAMSI module.
- Update VBIOS to AMD_SUMO_GENERAL_100.
- Update Llano-AGESAMSI module.
--->Fixed DRAM Timing incorrect when DRAM insert DIMM3 or DIMM4.
------> a) When OC Genie Enable and insert 1600Mhz Memory, system will reduce Memory frequency to 1333Mhz, but work timing still use DDR1600. DRAM Timing mode must be set to Manual at this moment.
------> b) When OC Genie Disable, above setting have be set to Auto.
- Add CPU FAN 3/4 PIN ITEM and System FAN1 SMART FAN Support.
- Fixed select RAID mode and SATA decive plug on SATA1 or SATA2, system will hang CP#B2 issue.
- Fixed AMD USB3 yellow mark issue in WHQL test.
- Patch System FAN1 SMART Fan Support.
- Fixed CPU/System1 SMART Fan cannot work on first setting.
- Patch two Memory fail issue.
----> G.Skill F3-1066CL7T-3GBPK
----> G.Skill F3-1066CL7T-6GBPK
- Patch TL-584 and RST.
- Fixed when Enabled TPM support, system will hang CP#4F 40 Sec issue.
- Update TMP patch.
- Update Llano-AGESAMSI module.
- Update SB module to 4.6.4.1_AMD_SB900_017.
- Update AHCI module to 4.6.3_AhciSrc_017.
- Update CSM function.
- Update PEI Ram Boot module to 4.6.3_PEIRamBoot_10.
- Update smiflash module to 4.6.3.6_SMIFLASH_19.
- Update shell module to 4.6.3_SHELL_20100528_01.
- Update fixedbootorder module.
- Update post time tune module to 4.6.4.0_PTT_06.
- Update to 4.6.3.7_AgesaV5_039.Modified AGESAMSI setup menu for OCICC.
- Show cpu ratio in cpuz module.
- Add ukey function.
- Add VGA display rule.
- Adjust Initiate Graphic Adapter default to PEG.
- Fix some time will hang 0Dh by fixbootorder function.
- Fix plug PCI/PCIE lan card can't boot issue when the "Lan Option ROM" item set disabled.
- Fix mflash boot issue.
- Change setup item "Enhanced Spread Spectrum" to "Lab Burst Mode".
- Fix memory-z part string issue for some memory.
- Enable C'n'Q function as default and C1E item.
- Add clear cmos function.
- Adjust VGA display rule.
- Fixed Lab Burst Mode always enable when OC more than 133Mhz successful then load default.
- Fix bev device cannot boot.
Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results. Do NOT use the BIOS/UEFI integrated M-Flash Routine.

E7696AMS.146 ---> E7696AMS.140
- Add UEFI_Driver module for doing raid and installing UEFI OS.
E7696AMS.140 ---> E7696AMS.150
- Add Agesa MSI Source safe version 4.6.3.7_Llano-AGESAMSI_040-4.
- Modified AGESAMSI Adjust Ratio function incorrect.
- Support CMOS bad flag in AGESA Platform Configuration.
E7696AMS.150 ---> E7696AMS.162
- Fix USB keyboard and mouse would useless after using m-flash boot function.
- Fixed system can't boot up when press 'Del' or 'F11' key with using AMD A4-3300 (AD3300OJZ22GX/HX) sometimes.
E7696AMS.162 ---> E7696AMS.163
- Fixed clear coms or use M-Flash update bios "Windows Boot Manager" will lost.
- Fix windows boot order will be disordered after clear coms or load default.
Please note that flashing this release occurs entirely at your own risk!
>>Use the MSI HQ Forum USB flasher<<, Method II for best results.
Do NOT use the BIOS/UEFI integrated M-Flash Routine.

BF3 w/ A75MA-G55 OCed

I have my llano(16-3650) clocked to 140+ bus clock with lab burse mode enabled, it runs everything great and passes all benchmark tests except for BF3. With lab burst mode enabled and base clock above 133, BF3 has weird problems(you dont run as fast and people warp all over in multiplayer. Once base clock is put under 133 it runs great again(yes i tested on the same server). Anyone else had this problem and have any suggestions/solutions? I hate to put it back to near stock speed but thats the only way it will run the game right currently.

Quote from: oldvikingschool on 30-October-11, 06:15:21
I tried A8-3850 on 150MHz BLK and play Dead Island, no problems(In fact it was smoother than ever!). League of Legends... everything went in slow-motion and speeds up randomly similar to a overly spec'd HD-TV. I think it's depending on game when overclocking a bit too much. (But damn 150MHz on 1.376v is pretty damn impressive, GJ MSI engineering team!)
Ya, it works fine for some games/apps(SC2 works great) but with BF3 it does weird stuff similar to what you are describing. If I put it at stock clock it runs bf3 fine.

MOVED: Found issues on A75MA-G55

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=152752.0

Quote from: HU16E on 05-October-11, 01:17:33
No need to clutter up the beta thread with final releases when it is readily available at the MSI Global Website for the mainboard; http://eu.msi.com/product/mb/A75MA-G55.html#/?div=BIOS
Don't use Live Update. For flashing, use the forum's USB Flashing Tool found here, along with instructions how to use it; https://forum-en.msi.com/index.php?topic=108079.0
Like I said earlier, I can't download the 1.3, it says my bios is the latest. And if MSI could be sweet and put a download link instead of pointing to Live Update.

Burst mode photo incorrect orientation (outside Album)

When I use burst mode in portrait, all photos are shown oriented correctly in "Album", but when viewed with any other photo app (Google+, Google Photos, Cyanogen Gallery etc) have actually been saved rotated in landscape. Single shot without moving the position of the camera is correctly taken and saved in portrait.
Detail of images that should be portrait show dimensions for landscape.
This does not affect photos taken as landscape photos, only portrait.
Can someone else test this and let me know if everyone is affected?

I'm trying to help you out but not with that attitude, contact your local Xperia Care
http://support.sonymobile.com/global-en/contactUs/
good luck
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Lack of burst mode in N8?

Was trying to take an image of a moving object today, and when looking in the camera settings I saw that there was no burst mode
This was pretty surprising since all the older nokias I have owned had this including N73, N79, and N86.
Wondering if there was a specific reason for not including this feature, maybe due to the system optics?
Hoping someone on here knows.
Thanks in advance
PS - 1st post, great forum nokia hope to become a regular

@RaYYaN22
Welcome to the forum.
I haven't actually tried it but is the 'sports' setting what you need.
It says it is for fast moving objects.
History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82
Current: Nokia N8 (Anna - I have no intention of going to Belle) - and delighted with it!

Problems new build A75MA-G55

Hi all,
I put together a new system last weekend, which ran for about 2 days, and then it basically stoppedworking properly. The hardware components are:
MSI A75MA-G55 with an AMD A8-3850
2 x G.Skill Ripjaws-X 8 GB, PC3-12800, 1600 MHz, 9, Non-ECC
SSD Kingston HyperX 120 GB, S-ATA III / 600
Seasonic X-400 Fanless 400 Watt
The whole thing is in a Fractal Design Define Mini box, and the OS is Ubuntu 11.10 x64 version. When it was running, it suddenly froze; after I restarted it, it did not boot and crashes with segfaults and kernel panics (both "normal" Ubuntu and the safe-mode). Once in a while it actually boots (both normal and safe mode) but is not stable and freezes after a few minutes. I have tried the following things, with no result:
- ran memcheck for 24 hours; no errors
- used a different harddisk w/ Ubuntu; no boot
- used new Win7 install and Ubuntu Live USB sticks; no boot
- updated bios to v1.3; this went without errors but still no boot (and re-tried the above again as well)
What I will try in addition is to use a different PSU to ensure that is not the problem.
What I would like to know is, if there is a way to test/validate the motherboard and/or APU without an OS (and another board) and if anyone has any idea what the cause of this can be. Any help/input/ideas is much appreciated!
Thansk in advance,
Joost

SafeMode is not a bad test for possible memory problems, but it doesn't seem to run all that well there either?
Ubuntu is not my department. I was considering a mal-functioning memory, too. What other kind did you try with?
You can also try without the hard disk altogether, and see if things keep running well for an hour or so. Try having BIOS hardware monitor visible during that time, to see if temp. keeps climbing. That is usually evidence processor isn't very fond of your memory.
Use a single stick. Set memory speed down. Make sure memory gets the volts it wants, try 1,65 volts for example.

Problem with Bios 2.0 MSI A75MA-G55

hello, I need help ....
A few days ago I did the update the BIOS of my MSI-A75MA-G55, which is 2.0 and he has presented problems. It has a processor (AMD A-8 3870K) before trouble could overclock to 4.0GHz, but now it goes from 3.6ghz: (... By increasing to over 3.6ghz pc does not start and I have to clear the CMOS for reuse ... the second problem is with the GPU hd6550D now I can not run any game at medium quality such as "far Cry 3" or "Bioshock Infinite" and before if I could .... the previous BIOS version was the V13 or 1.3 which everything worked.
The characteristics of my pc are:
- MSI Motherboard-A75MA-G55 (MS-7696)
- 3870K Processor A-8
- 2x 4GB Corsair Vengeance DDR3-1333 (667MHz)
- Hard Drive WD 750GB 64MB Cache
- Thermaltake CLP0575 Frio OCK
Thank you in advance ...!
Sorry do not know much English ...!
Note: I did a BIOS flash, with the tool provided here, to downgrade the BIOS version and I could not because at the end and restart the PC had always the same version.

As the problem is only bios related from your report tell MSI about it so the issue can be fixed: >>How to contact MSI.<<
Quote
Note: I did a BIOS flash, with the tool provided here, to downgrade the BIOS version and I could not because at the end and restart the PC had always the same version.
Downgrading is not possible: Quote from: http://www.msi.com/product/mb/A75MA-G55.html#/?div=BIOS
* There is no way to reflash back to BIOS version 1xx if you already updated to version 2xx

How to get a single pulse Using Burst MOde?

Harlow Peeps! Just want to know how to get a SINGLE pulse generated by the AGILENT 33220A function generator? the results i get it's in the burst MODE and everything is running smoothly and fine! it's just that i want to get a single pulse froM it only and not repeated triggeriong of the pulse...
thanks! ^^
cheers!

hi,
find attached an example, how to set hp33250a ( ag33xxx ) into burst mode.
hope this helps........... - play with it - and change it to your needs.
regards
Werner
Attachments:
hp33250a _burst.zip ‏165 KB

MOVED: A75MA-G55 - "Lab Burst Mode"?

Similar Messages

Maybe you are looking for