MOVED: A75MA-G55 Static-y, echo-y audio output from local files

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=156801.0

fuser -v /dev/snd/* when chrome is playing an mp3
UTENTE PID ACCESSO COMANDO
/dev/snd/controlC0: gigitsu F.... pulseaudio
/dev/snd/controlC1: gigitsu F.... pulseaudio
/dev/snd/controlC2: gigitsu F.... pulseaudio
/dev/snd/pcmC0D0p: gigitsu F...m chrome
/dev/snd/timer: gigitsu f.... chrome
/etc/pulse/default.pa without comments
.nofail
.fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
load-module module-detect
.endif
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
load-module module-position-event-sounds
load-module module-filter-heuristics
load-module module-filter-apply
And i've not altered /usr/share/alsa/alsa.conf.
libflashsupport-pulse did not work, I've killed and started pulseaudio but nothing. I did not even flashplugin

Similar Messages

Simultaneous audio output from Ipad and bluetooth ?

Is it possible to have simultaneous audio output from IPAD and a bluetooth speaker? At present I can only get audio from the Bluetooth Speaker and nothing from the IPAD's audio out! My purpose is that my Mom will hold the IPAD to listen to her Audiobooks but my Dad who sits across the room and is hard of hearing needs a speaker close to him, so I need simultaneous audio from both devices.
JW

Use this: http://smile.amazon.com/KOKKIA-A10m-MULTI-STREAM-Transmitter-concurrently/dp/B00 69G1SIC/ref=smi_www_rco2_go_smi_1968491462?_encoding=UTF8&*Version*=1&*entries*= 0&pf_rd_p=1968491462&pf_rd_s=smile-campaign&pf_rd_t=201&pf_rd_i=B0069G1SIC&pf_rd _m=ATVPDKIKX0DER&pf_rd_r=1N57Q0YT9QW7Y1K596YD and use two Bluetooth speakers for them. The speaker output on the iPad is pretty limited and your mother will probably have a hard time hearing it. Get a BT speaker for both and the above device and they both can listen from whatever location they want (within 40 feet) and get better sound.

"Could not get the audio data from the file" error

Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.

Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.

Multi channel audio outputs from a laptop such as 5.1 or 7.1

is it possible to get multi channel audio outputs from a laptop such as 5.1 or 7.1 for watching Movies or television while using Windows media Center.

Ok so i order to help anyone who is interested.
The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
i then imported this into premiere pro.
this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
this is the only way i was able to send stems with all the edit points and fades for the sound editor.
If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
Fingers crossed Apple fixes the fcpx xml export.

No audio output from the orange mini j

Hi all,
I am having problem with my Audigy 4.
Hope you know what I mean, there are three 3.5mm mini jacks
of three different colors: green, black, and orange.
I have noticed that there are audio outputs from the green and black mini jacks only, while the orange mini jack seems to be not working at all.
When I plugged an earphone line to the orange mini jack,
I could hardly hear any sound from it.
Any idea?Message Edited by kwfine on 07--2007:03 AM

The orange jack is the center/subwoofer audio jack. If you're using a 5. speaker system. Make sure you have selected 5. speaker setting in the speaker setup software.
Jason

Analogue Stereo Audio Output from the New Mac Pro

Does anyone know what the analogue stereo audio output from the new Mac Pro is? From the specification, there appears to be a stereo output for headphones, but it is unclear what other audio outputs are available and whether a stand-alone amplifier is required to drive small stereo speakers. Yan (UK)

It is line-level. You will need powered speakers or an amplifier.

MOVED: A75MA-G55 - "Lab Burst Mode"?

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=153182.0

I checked the changelogs for the standard BIOS release series of the A75MA-G55. There are two references to "Lab Burst Mode".
The first appears in the changelog for the E7696AMS.138 [v1.3b8] release:
- Change setup item "Enhanced Spread Spectrum" to "Lab Burst Mode".
The second reference appears in the changelog for the E7696AMS.139 [v1.3b9] release:
- Fixed Lab Burst Mode always enable when OC more than 133Mhz successful then load default.
That tells us three things:
1) The option should be available be available in the E7696AMS.130 final release under the name "Lab Burst Mode" and as "Enhanced Spread Spectrum" in all final releases before that.
2) The "old name" for that option suggests that it has to do with "clock modulation" (because that is what Spread Spectrum generally does).
3) Spread Spectrum probably may need to be enabled first in order to get access to the "Lab Burst Mode"/"Enhanced Spread Spectrum" option.

Help!! No AUDIO output from iMac through FW to mixing board (zed r16)

With my system stated below, I run an Allen-Heath ZED R16 board via FW. PROBLEM: I get NO Audio output to the R16 when I play iTunes or DVD/CDs in the iMac.
I DO get audio feed when I playback projects from Logic.
I have checked all System Prefs on the iMac (cahnged to the ZED); on Logic (changed to the ZED). I tried all different channels, routing, etc. NOTHING.
Can someone help?

Well, the Allen-Heath support site had the answer... quite surprised and pleased!!
Have to reconfigure the iMac speakers in the Audio/Midi preferences. The details are found in this URL:
http://allen-heath.helpserve.com/index.php?m=knowledgebase&a=viewarticle&kbarticleid=238
The ZED R16 is a great board but certainly not Plug' n Play.

Can MainStage split the audio outputs from a plug-in to separate busses/out

Take EXS24 or Battery 3 or Kontakt as examples
Only one plug-in instantiated but each drum 'hit' sent to separate outputs from within the plug-in/VI and brought into the mix on Audio/Aux channels for separate processing.
It's easy to set up in ProTools and Logic.
(I don't want to send the output of the channel strip to a bus - I know how to do that)
I've read the manual so many times and can't find any answers.
Does MainStage actually allow this routing ?
Thanks for any help
Lee

As far as I know, the only way to do what you want in MainStage is to set up an EXS24 for each output.
The EXS24 does have an option to load with multiple outputs, but I haven't found a way to make it work on my set up.

HT4437 using airplay from my ipod touch 4th gen. no audio output from the tv. on the ipod it shows that it is streaming to the apple tv. whats the problem

i get the air play icon on my ipod touch. when i click it the output from my ipod stops but i dont get any audio from my tv. whats the problem?

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Audio Output from Mac Mini 2010

Hello -
I purchased a mac mini 2010 this weekend for use as a home theater PC. I've got it connected to an Onkyo tx-sr604 a/v receiver via HDMI. I then pass the HDMI signal from the Onkyo to my hdtv, so I think it just passes through. For audio, I use a surround sound system. And, in case it matters, I have a second tv connected via the DVI output on the mini.
The Onkyo indicates that the audio input signal on the HDMI is PCM Multichannel. When I play movies (e.g., Netfix or DVD) or music (e.g., pandora) on the mini, I don't get any sound on the center channel in multi-channel mode. In direct mode, I only get sound in the front left and right speakers. I'd like to have normal surround sound.
Is there not a way to get 5.1 surround sound from the mini? Or, am I missing a set up or something? If I connect my receiver to the mini with the digital audio output, will I then receive digital audio?
Thanks.

Welcome to the Apple Discussions!
Mike it is my understanding that if you want 5.1 Surround sound that you must connect the mini directly to the SS system and not pass the audio signal through another device.
Dah•veed

Simultanious audio output from both mini Displayport and Audio Output port?

Hey guys,
I was wondering if someone who already has audio+video output through the mini displayport set up can be so kind and answer the following questions for me:
Can audio be output simultaniously from 3.5mm audio port as well as the mini displayport? That is, if I output both video and audio to my reciever through the 2010 iMac's mini Diplayport, can i use the standard audio output port to provide line input for a further set of (active) speakers (analog would be fine)?
In the case both outputs CANNOT work simultaniously, which one will work if i have both plugged in? If the mini displayport has higher rank (or priority or what whatever i should call the one that works when both outputs are plugged in), and the reciever it is plugged into is switched off, will audio automatically switch to the standard audio port? Same question goes if the standard audio output port has higher rank/priority?
Many thanks in advance!
Just in case you are wondering why the heck i would wanna do that, here's some background:
I am planning on setting up my new 27' iMac on a 'work' desk in my bedroom, where i can comfortably sit and work on the computer as well as use the beautiful screen as my bedroom TV. Since i also wanna use my mac for all my living room multimedia needs (movies, tv shows, music, etc), i plan on running a long (15m) audio+video HDMI cable all the way up to my reciever in my living room. Furthermore, i am also planning on running a USB cable to the living room (through something of this sort: http://www.coolgear.com/images/171632pro.jpg) plugged in to a usb hub mainly for mouse/keyboard availability in the living room, but also for other things such as external hard drives and so on. The problem is that, apart from having my audio play in the living room, i also want to provide line input to my reference monitors that will be located at the iMac desk and i obviously much prefer i get the line input directly from the mac rather than running a third cable from reciever back to the speakers.
Message was edited by: Leeon

Anyone?
Is that so few people are using the new mini displayport for audio, or did i ask the wrong way?
Help will be greatly appriciated as i need this info in order to plan my purchases!

Audio output from dock

I have an amp that I would like to use with the iPad. I used to use it with my iPod and a mini dock with line audio output. Theses docks designed for the iPod, do not work with the iPad.
Is the such an accessory available yet?
Thanks,
Ken

Apple sells official iPad dock.I have it and works really well. It has a line out jack so you can connect it to any kind of amp or speaker.
http://store.apple.com/us/product/MC360ZM/A?fnode=MTc0MjU4NjE&mco=MTc0Njk4NTY

Selecting audio output from iPhone - bluetooth or dock?

Hi
I have a problem selecting audio output on my iPhone 3GS with my incar system
Set up:
Dension ipod dock connected direct to CD changer port on Radio
Bury Bluetooth hands free device.(CC9060)
My preferred option is to have the Dension play my audio.
However when I turn on the iPod function on the iPhone, the audio defaults to the Bury hands free system and tried to stream the audio via bluetooth which the phone cannot do.
On the bottom right of the screen on the iPhone, I see a speaker icon - I click on this and I get the option to select the iPod Dock or the CC 9060 (Which is the Bury Hands free)
I can select the iPod dock and teh audio plays fine, however, how to I force the iPhone to always use the iPod dock and not the Bury hands free.
From what I can tell, its not the Bury which is forcing teh choice - its the iPhone, but I cannot see anywhere where there is an option to choice the iPod dock as the default audio device.
Any one have any ideas?
Thanks
Glenn

Found a quite probable fix.
I've took my dock station under big lens and noticed a stuck contact -- they are supposed to be somewhat movable. So I pick a real small screwdriver and unstuck the contact.
Issue is apparently gone.
Message was edited by: Alex HQuest

Audio output from ATV carries noise/humm when also sending video

I have my Apple TV connected to my LCD TV via HDMI, and I am also sending audio out via the RCA jacks to my distributed audio system (Netstreams Quartet).
The audio signal going to the Netstreams system has a noticable humm to it. The humm goes away if I unplug the HDMI signal to the TV. I have tried using Component video out but that also introduces the humm to the audio.
It seems that having an active video connection add noise to the audio out. Has anyone solved this problem before ?

jeff Stringer wrote:
would a ground loop isolator solve a problem like this ?
Not sure to be honest. May depend on where exactly the problem lies.
I am pretty sure it's not the av system itself, since other inputs sound fine. It is just the combination of video and audio coming out of the ATV that introduces the humm.
Is the AppleTv new, I'd be tempted to replace it if it is, or get it checked over if under warranty, as you really shouldn't be faving noise/hum over analogue audio just from using video.
AC

MOVED: A75MA-G55 Static-y, echo-y audio output from local files

Similar Messages

Maybe you are looking for