MOVED: [Athlon64] K8nSLI platinum

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] K8nSLI platinum

Kindly gives your full spec's of your pc including PSU so others might help you!! Does your onboard LAN is enable from the BIOS? If it's disable try to enable it. Gd luck

Similar Messages

  • MOVED: [Athlon64] Neo2 Platinum & 4x512 ram

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] Neo2 Platinum & 4x512 ram

    Well you may even get an answer if you post it in the right place.
    Topic Moved

  • [Athlon64] K8nSLI platinum

    I'm having problems with the lan connection on this board. My NTL cable installation disc keeps saying that my network board is not working? Is there a problem or could the board be faulty?

    Kindly gives your full spec's of your pc including PSU so others might help you!! Does your onboard LAN is enable from the BIOS? If it's disable try to enable it. Gd luck

  • MOVED: [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

    First post, whoo hooo   
    So what version of BIOS are u running?  I recently installed the two newest versions 2.0 and 2.1, and they both give me problems.  With the latest (2.1) I'm getting the same error as you.  Returning back to previous BIOS fixed my problems.  Oh yeah, my RAM is Kingston Hyper-X, so i don't think thats your problem.
    Let me know if you fix it, thats why im here, .

  • MOVED: [Athlon64] Annoying little problem! PLease help

    This topic has been moved to Operating Systems.
    [Athlon64] Annoying little problem! PLease help

    Hi Ben.
    Thank you very much vor your replay
    but I still can get it
    Here the code
    on testAlphaChannels sourceImage, cNewWidth, cNewHeight,
    pRects
    cSourceAlphaImage=sourceImage.extractAlpha()
    newImage = image(cNewWidth, cNewHeight, 32)
    newImage.useAlpha = FALSE
    newAlphaImage = image(cNewWidth, cNewHeight, 8)
    repeat with i=1 to pRects.count
    destRect=......
    newImage.copyPixels(sourceImage, destRect, pRects
    newAlphaImage.copyPixels(cSourceAlphaImage, destRect,
    pRects,
    [#ink:#darkest])
    end repeat
    newImage.useAlpha = TRUE
    newImage.setAlpha(newAlphaImage)
    textMember = new(#bitmap)
    textMember.image=newImage
    end
    But the result is not correct. O my example
    http://www.lvivmedia.com/fontPr/Fontproblems3.jpg
    image to the left is
    created on background image, and image to the right - with
    code above
    What is wrong in the code, I quoted above?
    Any help will be appreciated
    Jorg
    "duckets" <[email protected]> wrote in
    message
    news:ekhekq$c6g$[email protected]..
    > I think this is what you'll have to do:
    >
    >
    >
    > Do the copypixels command as per your 2nd result example
    (where "no
    background
    > image is used") using destImage.useAlpha = false.
    >
    > Create a new image as a blank alpha channel image (8
    bit, #greyscale)
    >
    > Repeat the same copypixels commands for each number, but
    this time the
    source
    > image is 'sourceAlphaImage', and the dest Image is this
    new alpha image.
    And
    > the crucial part, use: [#ink:#darkest] for these
    operations. This is
    because
    > you are merging greyscale images which represent the
    alpha channels of
    each
    > letter. The darker parts are more opaque, and the
    lighter parts are more
    > transparent, so you always want to keep the darkest
    pixels with each
    copypixels
    > command.
    >
    > hope this helps!
    >
    > - Ben
    >
    >
    >
    >

  • MOVED: MSI P965 Platinum mainboard, 3 problems, 1 question

    This topic has been moved to Intel Core Duo and Core 2 Duo based boards.
    https://forum-en.msi.com/index.php?topic=104738.0

    Here are some more specs regarding my configuration:
    POWER SUPPLY
    SilverStone Zeus ST65ZF 650W SLI Power Supply
    Specs info here: http://www.3dgameman.com/forums/showthread.php?t=35458
    CHASSIS
    Thermaltake Armor VA8000BWS
    Specs info here: http://www.thermaltake.com/XaserCase/armor/va8000bws/va8000bws.htm (bottom of the page)
    PROCESSOR
    Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA 775 Processor
    Specs info here: http://processorfinder.intel.com/details.aspx?sSpec=SL9S8
    MEMORY
    OCZ 2GB (2 x 1GB) PC2-6400 Dual Channel Platinum Revision 2 XTC Series DDR2 (OCZ2P800R22GK)
    Specs info here: http://www.overclockers.co.uk/showproduct.php?prodid=MY-072-OC
    VIDEO ADAPTER
    ASUS Extreme N7800GTX 256Mb
    Specs info here: http://www.superwarehouse.com/Asus_Extreme_N7800GTX_256MB_Video_Card/EN7800GTX_2DHTV_256M/ps/666522
    HARD DISK
    Seagate Barracuda 7200.10 ST3320620AS 320GB Hard Drive (Serial ATA-300, 7200 RPM, 16MB)
    Specs info here: http://www.pricegrabber.com/search_techspecs_full.php/masterid=19777096
    DVD-RW
    LG GSA4040B - 4x DVD+/-R/RW/RAM IDE
    Specs info here: http://www.digit-life.com/articles2/lg4040-multi/
    I hope this is enough information

  • MOVED: [Athlon64] tv out problem

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] tv out problem

    Oh my God! 1 mth still no reply from ppl?   

  • MOVED: [Athlon64] MSI Diamond-D and OCZ memory compatibility

    This topic has been moved to Overclockers & Modding Corner.
    [Athlon64] MSI Diamond-D and OCZ memory compatibility

    More imortant than the brand are the types of chips used.
    Winbond Bh6 and -Ch5 overclock poor on a AMD64 system, or u need to set the vMem redicoulisly high.
    With Samnsung and Micron chips u can get the same timings @normal voltages (2,7v).
    Here is a list of chips, icw brands:
    http://www.techpowerup.com/memdb/
    Make sure u get Micron 5B G or Samsung TCCD chips !
    Agree with Stick about the amount of memory. First of all: Windows XP (32bit) cannot adress more then 3 GB, furthermore, no way in the world u are gonna use that memory. Stick to 2GB which is more then enough, heck, 1GB is allready more then enough 99,9999% of the time.

  • MOVED: K8N Neo2 Platinum resets overclock....

    This topic has been moved to Overclockers & Modding Corner.
    K8N Neo2 Platinum resets overclock....

    Sorry about asking a stupid question.
    Quote from: the_cultie on 25-May-05, 17:50:12
    Are you using CoreCenter to overclock? What version is your BIOS? Post system specs.
    Quote from: tahuru on 25-May-05, 14:24:45
    the overclocking is done solely in bios.
    Anyway, there seems to be different problems relating to waking up from sleep, I know that Cool'n'Quiet would stop working when I would wake up from sleep. I'll try overclocking mine a bit and I'll get back to you.
    Also, check that the Save/Clear CMOS jumper is in the right position.

  • MOVED: [Athlon64] Failed Bios update with both Live Update and Dos version = badchecksum shutdown

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] Failed Bios update with both Live Update and Dos version = badchecksum shutdown

    Sometimes bios recovery is a long shot .
    But the award bios v.6 is supposed to be able to do it if the bootblock is still intact.
    Best way seems to be to strip it down to minimal configuration , disconnect all drives except floppy , one ram module , perhaps without video card also .
    Look here :
    http://pages.sbcglobal.net/jefn/bootblock.html

  • MOVED: [Athlon64] Delayed Boot time

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] Delayed Boot time

    Quote from: emtownsend on 01-November-05, 14:20:57
    The long boot... Does your system POST just as fast with or without the drive?  Or, are you talking about the OS loading, like when the bars cross the XP startup screen? (for lack of better description)
    In OS loading, i can see only 1 bar crossing without DVD connected and 4 with it. DVD is set to Master and Maxtor 120 too.

  • MOVED: [Athlon64] Should I use the 24 pin PSU converter ?

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] Should I use the 24 pin PSU converter ?

    I've heard that most 24 pin boards run just fine with just the 20 pin plug... just has long as your PSU has enough amps on the 12v for proper function. Might be a different story if you have a fully populated SLI setup though.
    I don't see why they wouldn't as most new PSU's come with a plug that is essentially a 20 pin that just has a detachable 4 pin add on. Of course if you need the PCI-e power plugs and don't have any adapters for those, you may as well upgrade anyhow.

  • MOVED: [Athlon64] Keyboard Recognization issue...

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] Keyboard Recognization issue...

    Quote from: dacull on 11-September-05, 06:06:15
    So seems this keyboard issue remains nearly a year after i first reported it atleast..
    https://forum-en.msi.com/index.php?topic=61832.0
    I managed to find one PS2 keyboard that gave me enough functionality to be able to turn on the USB, then switch to a USB keyboard that solved any instability problems, no problems since then.
    The only advice i can say is completely remove power, when you switch power on all the LEDs on your PS2 keyboard should flash. if they dont, switch off and then on again until they flash, then press the reset button to startup your computer.
    as you know USB is disabled by default :(
    I completely unhooked every component, making my case just as empty as the day I got it. Every single part detached from one another...
    I then hooked up all the absolute bare minimum components, and on power-on, and after several power-ons, the PS/2 keyboard did NOT flash, unfortunitly. However, I noticed the USB keyboard hooked into the USB slots DOES flash. I have decided to juist pay the shipping fee and have newegg replace the mobo. Better safe than sorry. I am sure if my PS/2 slot wasnt defective, the mobo wouldn't have given me a single problem and would be easy as pie to set up for my first build. I am confident however that MSI does make great stuff. I hope my replacement works as smoothly as MSI has a reputation for. Thanks for all your help.

  • MOVED: [Athlon64] Clear PnP Data Pool in K8N Neo4 running xp64

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] Clear PnP Data Pool in K8N Neo4 running xp64

    Hello !
    Strange Problem..... 
    You mentioned Problems with your boot-sequence and your Raid Setup. I don´t know exactly but it think this is connected with your SLI Problems. Which Bios Version are you using ? Did you try to make a CmosClear for reinitialising PNP and DMI stuff ? You should also check your Cmos onboard Battery, perhaps its empty.
    I have heard about a Problems with this some revisions of this Board, Onboard Battery is emptying very fast sometimes.
    Good Luck
    Greetz MurdoK   

  • MOVED: [Athlon64] K8N Neo4 Bios ver 1.50 eats batteries

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] K8N Neo4 Bios ver 1.50 eats batteries

    Hi, Takesix.
    Unfortunately, you are not the only person with this problem.  I purchased a non-SLI version of this board about 6 weeks ago and am on my third battery, all from different manufacturers.  The board was originally flashed with V1.50 but I flashed it to v1.30 because I had read that it was a better version.  This has not stopped the draining battery problem.  Have e-mailed MSI and Monarch Computer tech support hoping to get an answer but haven't received any replys yet.  To read others strories go to the following link.     https://forum-en.msi.com/index.php?topic=84120.0  Incidentally, how old is your board?  Wonder if it was a specific lot?

Maybe you are looking for

  • Fixed asset import

    Hi, I understand the FA import only allow us to import starting from the beginning of the financial year (e.g. Jan 2010). My question is what about fixed asset purchased after Jan 2010. My customer is going live on 1 Jul 2010. Does it mean they have

  • Printing from Reader XI crashes HP 2605 printer, please help

    Hello all, My HP 2605dn printer reboots whenever trying to print PDF files.  Here are the steps I’ve performed to determine that the issue is with printing PDF files only and not other file types: Mac OSX 10.7.5, HP 2605dn, Apple HP driver v19.6, HP

  • Renewed Cert, now http redirect for OWA no longer works

    From this previouse thread, where I was discussing cert issues, I renewed my cert (to expire in a few days) from my third party (GoDaddy).  I installed the new Cert via teh GoDaddy instructions: http://support.godaddy.com/help/article/4877/installing

  • Date issue - month converting to date and date converting to month

    I've got some data in a text file for SQLLDR from an SQL SERVER. The date columns in it are in YYYY-MM-DD format eg- 2011-01-03 00:00:00 but in oracle we are using MM-DD-RRRR. Don't know why DD and MM are getting interchanged. Please help. This is my

  • Quake 4 Will not start with USB Audigy 2 NX Connec

    Anyone playing Quake 4 successfully with the USB Audigy 2 NX installed? Will there be a driver update so this game will play? Activision was no help. When I disconnect mine I can play the game fine... other than no sound. How about a driver update Cr