MOVED: Audio Problem with MSI G45

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=175822.0

Quote from: mistell on 01-January-14, 00:00:33
Found a fix for me, rolled back the bios and used the built in mobo utility to flash it. Seems to work perfectly now.
Thinking it may be the latest bios release that is has an issue or two.
to which BIOS you have flashed back?
Quote from: snou on 01-May-14, 16:46:12
I update latest version 1.7 still nothing cannot fix it...
Any solution?
your images are not showing, i dunno what is your issue.
have you seen the sticky? https://forum-en.msi.com/index.php?topic=175472.0

Similar Messages

Audio Problem with MSI G45

Hello, i have read all of the posts there about the same problem but doesn't help me to solve it..
When i try to install Realtek drivers then the Audio Service doesn't work
example :
and the Realtek Audio Manager is empty
example :
so i try to solve it by its default windows settings when i press the audio device icon and its show me this one
example :
after this my Audio Service and Realtek Manager change to normal
example :
example :
when i try to load a sound nothing working.
Both Realtek and Audio Service settings disabled again and so on the same loop. What can i do for this one?
Thank you for every answer :D

Quote from: mistell on 01-January-14, 00:00:33
Found a fix for me, rolled back the bios and used the built in mobo utility to flash it. Seems to work perfectly now.
Thinking it may be the latest bios release that is has an issue or two.
to which BIOS you have flashed back?
Quote from: snou on 01-May-14, 16:46:12
I update latest version 1.7 still nothing cannot fix it...
Any solution?
your images are not showing, i dunno what is your issue.
have you seen the sticky? https://forum-en.msi.com/index.php?topic=175472.0

MOVED: Sudden problem with MSI K8N DIAMOND - urgent help needed

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=93490.0

Quote from: Tricky78 on 10-February-06, 07:00:58
lDaGGerl my friend , it worked !!! i don't know why but i did what u are saying and the PC booted normally !!! i didn't left the battery for a whole day but for 3 hours and it worked ...
anyway , after arriving at the welcome screen of Windows (it was such a sweet image !!) , the same thing happened.The pc froze and after restarting then it doesn't post again ... the proccessor is ok , the mobo was showing bios version 1.8 , so i guess it is an issue with the RAM ... I will run a test with different ram and let u know ...
Billy
It should be related with your Maxtor SATA-II HDDs. You might connect them to SATA1/2/3/4,which are controlled by nForce4 chip. So first set them as SATA-I mode and update their firmware. You need to contact Maxtor Technical Support and get the latest firmware. Check Maxtor's knowledge and you can find the correpsonding information.Also you can also find the related in this forum such as the following thread.
https://forum-en.msi.com/index.php?topic=93492.0

USB problem with msi (nforce 1)k7d420

USB problem with msi (nforce 1)k7d420
i encountered problem when using my apacer audio steno mp3 player with my nforce(which i don`t hav any problem when using with any VIA chipsets)
it detects and install the device automaticly but when i want to access it,it just gives me error msg
windows xp pro service pk1
nforce nvidia drver v2

http://www.nforcershq.com/forum/viewtopic.php?t=30003
may be ive not loaded it yet

Boot problems with Z77A-G45

Quote from: CMaster on 22-June-12, 15:31:08
Processor: Intel i5-3570K retail (new)
Mainboard: MSI Z77A-G45 (new)
Memory: 2 x Corsair 4GB XMS3 DDR3-PC1600 CMXBG3N2A1600C9 (new)
Graphics card: MSI N560GTX-Ti Twin Frozr II (new, currently disconnected)
SSD: Crucial M4 512GB (new, currently disconnected)
Power supply: Antect earthwatts 500W (used, fully functional)
HDD1: WD Velociraptor 300GB (used, rather full)
HDD2: Samsung Spinpoint F3 2tb (used, currently disconnected)
Optical drive: DH-201AS DVD-+RW (used)
Once everything is all connected up, installed in the case, etc etc, upon power up, the fans all spin up, HDDs initialize etc. Then after 10 seconds or so the system powers down again, with the screen (whether on the external or internal graphics) never having been active. There are no beeps from the PC speaker whatsoever, nor do there seem to be any indicator lights as I've had on previous MSI motherboards. The manual is completely absent of any troubleshooting section. So my main question is, is there any way to tell what stage the startup is failing on? Other threads on this forum (here and here) suggest that the problem is due to lack of processor support. As the motherboard was sold as Ivy Bridge ready, I'd like soe way of confirming this as most likely cause before paying for some fix.
Hey I am actaully sharing the similar problem of yours....
I am using MSI H77MA-G43 (BIOS v1.5), and a set of DDR3-1600 4GB RAM x 2.
When i am using both 2 pcs of RAM, i am facing the same problem:
"after 10 seconds or so the system powers down again, with the screen (whether on the external or internal graphics) never having been active. There are no beeps from the PC speaker whatsoever, nor do there seem to be any indicator lights as I've had on previous MSI motherboards. "
When I use 1 pc of DDR3-1600 4GB RAM, it works again.
I just wonder if there is some RAM compatibility problem with MSI motherboard...I have tried below 2 sets of RAM:
AMD DDR3-1600 4GB x 2 (1.5V) (AE38G1609U2K-U)
Kingston HYPER-X DDR3-1600 4GB x 2 (1.65V) (KHX1600C9D3K2/8GX)
Cheers!

Please don't hijack other's topics. >>Please read and comply with the Forum Rules.<<
Your components are not the same, starting with the RAM. >>Posting Guide<<
Please supply your full system spec.
Your RAM is 1,65V overvolted DDR3-1600.
Only add one module as per the instructions. Then do a full CMOS clear with power cord removed. >>Clear CMOS Guide<<
Afterwards go into the BIOS and set that memory to 1333, (ensure that XMP is disabled for now). Set the DRAM voltage to 1,5V. Retest and advise.

Problems with msi p35 neo 2

Default problems with msi p35 neo 2
pc works fine when using windows and the net and emails
only when using 3d mark or games do i ever get problems
just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
temps on the board (from msi dual core center temps cpu 33oc system 47oc)
memory voltage 2.1
any one know the settings for the ram
more details you need
System Details
MotherboardEdit Value
msi p35 neo2 fr
Motherboard BIOSEdit Value
latest
CPUEdit Value
core 2 quad 6600
CPU Overclock SpeedEdit Value
none
CPU HeatsinkEdit Value
standard intel that come with cpu
CPU Idle TempEdit Value
N/A
CPU Load TempEdit Value
N/A
MemoryEdit Value
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Memory VoltageEdit Value
N/A
Video Card(s)Edit Value
ati hd4870
Video Card SpeedEdit Value
N/A
Sound CardEdit Value
onboard
PSUEdit Value
g7 780 watt power extreme
Hard Drive(s)Edit Value
mator dimondmax 21
Optical Drive(s)Edit Value
N/A
Other CoolingEdit Value
3 80mm fans 1 frount 1 back 1 side
ModsEdit Value
N/A
Operating SystemEdit Value
windows 7

Quote
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Quote
memory voltage 2.1
Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x). Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800). The voltage at these settings should not need to exceed 1.95V. So please lower it accordingly. In case the freezes still occure, please run memtest86+ to check your memory for errors.
Quote
msi dual core center
Please get rid of that tool for all further tests. Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

VGA problem with FiFA 2003 and Audio Problem with NHL2003

i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...

Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway......

Firewire audio problems with OS X 10.5.6

Hello,
I’m experiencing audio problems with Firewire 400 on my Macbook running Mac OSX 10.5.6.
I’ve got a 2.4Ghz IntelCore 2 Duo with 4 GB RAM and 59 GB available on the internal HD.
It’s hooked up to a brand new Mackie D.4 mixer with 2 Firewire outputs. The problems occur on both Firewire outputs.
I’ve installed automatically from the software update (which I will never do again) to 10.5.6. I never tried the D.4 with 10.5.5 so I can’t tell if the problems occur there also.
The main problem is that after a couple of minutes of recording the sound starts to break up and get really distorted. After a while the sound comes back again.
The second problem is that Soundtrack Pro or Audacity don’t get any audio input from the D.4, although audio input is clearly visible in System Preferences – Sound.
The only sound program that works with all 14 Firewire channels is Ableton, but also in Ableton the distortion occurs.
An example of the distortion can be checked here:
http://media.kaalslag.com/firewire-distortion-problem-mackieD4+Macbook.mp3
I’ve roamed several forums and sites to solve the problem and I tried these solutions:
I updated again to 10.5.6. with the full combo download from the Apple site. Restarted. Problem still there.
I shut Airport off, because lots of sites mentioned problems with Airport conflicting with audio/firewire. Didn’t work.
I did the work around with shutting the Macbook off, disconnecting the D.4, restarting the Macbook, opening Audio/Midi Setup, connecting the D.4 again, toggling the format frequencies a couple of times. Again, no use.
Right now I’m using my “old” Macbook again to record from vinyl. This one is still running on OSX 10.4.11. No problems so far.
I’ve had the distortion problems occuring before with an USB interface. Hoped that the Mackie Firewire would solve the problem, but it seems now that there’s a serious audio Firewire problem which is still not solved in OSX 10.5.
Any help, tips and/or a work around would be much appreciated. Thanks!

You could try using another computer in Target Disk mode (as an "external HD"), or you can connect the firewire cable and disconnect all other network cables (turning off airport). Then on each computer go to the "Network" system preferences and select "Built-in Firewire" from the list of ports and choose "Manually" from the drop-down menu next to "Configure". Enter the following IP addresses and subnet masks, apply the changes.
_Computer 1_
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
_Computer 2_
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
After those ip addresses are entered and you've clicked "Apply", ensure that for both computers you have file sharing enabled (done in the "Sharing" system preferences), and then check the Finder sidebar to see if the computers can see each other (their names should appear under "Shared" in the sidebar--if not, try restarting).
If the computers dont appear (even after restarting), using the "Connect To" option that's available in the Finder's "Go" menu. In there, to connect to another computer enter it's IP address as follows:
afp://IP_ADDRESS
If you're on the computer with the ip address of 192.168.1.1, you would enter 192.168.1.2 as "IP_ADDRESS". The "afp" is the protocol (just like "http" for web), and stands for "Apple Filing Protocol"...Apple's file sharing protocol.

USB audio problems with 2013 iMac

I'm having a strange audio problem with USB microphones and headsets. The issue with my Logitech H650e is shown in this screencast I recorded. In the first part of the screencast, I am not speaking into the mic—yet you can see the levels fluctuating as if there is static playing (not in a natural pattern that you'd see when someone is speaking). In the next part of the video I demonstrate that selecting the built-in iMac mic for input, and then re-selecting the Logitech headset temporarily solves the problem. You can see the input start to fluctuate normally as it should when I am speaking. But at 0:31 in the screencast, you can see the input levels freeze and stop registering anything. I continued to speak until the end of the screencast, but no input was detected. For this screencast, I was on a Go To Webinar call, but the problem occurs regardless of whether I'm using Skype, Go To Webinar, GarageBand or any other software.
The problem with my Blue Yeti USB microphone is also different. In that case, the input does not freeze as it does with the Logitech headset. The levels appear as you would expect, and it seems to work. However, the person on the other end can hear static in the background, even though I don't hear it in my own headphones. I learned this because I just tried to do a Skype interview with the Blue Yeti, and the interviewer told me they could hear static. We closed Skype and called each other back twice, but the problem persisted. Then, suspecting the problem was related to what I described above with the Logitech, I unplugged the Yeti and then plugged it into my Macbook Air 2013 (also running Mavericks). Lo and behold the static completely disappeared.
My Griffin iMic and Audio Technica lavalier mic (attached to the iMic) behaves similarly to the Yeti, except in this case I can hear the static when I speak with my monitoring headphones. The input works but I get a lot of cracking and static in the background. This was confirmed by calling the Skype Test Call number and recording a message, which is then played back.
Here are the facts:
All 3 of my USB audio microphones/headsets do not work with my 2013 iMac running Mavericks
All 3 of these microphones/headsets worked fine with my 2008 Mac Pro running Mountain Lion
All 3 of these microphones/headsets work fine with my 2013 Macbook Air running Mavericks
In this other thread, several people are reporting similar issues with the iMac 2013 and Mavericks. At least two people did not have the issue when the iMac 2013 was running Mountain Lion. This of course suggests the issue is the combination of the iMac 2013 and Mavericks.

Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.

Audio problems with Droid/X

When sending voice messages using Cloudtalk, the recipient hears only garbage. I contacted Cloudtalk technical support, and it appears that the 3gp file sent by the phone is not recognized. This problem is known by them, and happens only on Droid/X.
Anyone else is experiencing audio problems with the droid/x?

That doesn't sound like an audio issue with the X, it sounds like a compatibility issue between the X and the service.

Audio problems with CHS 435

Hello all, I'm having audio problems with my FiOS set top box. When I start to change channels I lose audio and can't get it back unless I turn the TV off/on or I change the HDMI source on my TV . Seems after changing a couple of channels the problem happens. I've tried the in home agent auto correct, and different HDMI cables. I have a Westinghouse TV and I'll try a firmware update for the TV and see if that fixes it. Any fix for this and the possibility that it might be the set top box ? I just got FiOS and all is going well besides this issue. Seems that the other STB that are model # 335 aren't having this problem.

Some TVs have had issues with the HDMI handshake and the Audio. You may be required to use the separate bulkier HD Component cables with separate audio cables. Or try it as a solution on that TV.
I have CHS 435 DVR on a Samsung, and 2 CHS 335s on different model Vizio TVs, all with HDMI, and no issues. Others have reported different issues. I did a search here with the following results. Perhaps this information will help.
http://forums.verizon.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3AFi...

Audio Problems with some HD channels (HBO mostly)

I'm experiencing sporadic audio problems with a handful of HD channels. Most noticably on HBO.
When the audio is output through the television itself, it sounds OK... however if the audio is output through my home theater receiver and speakers, I can hear a lot of static and "crackling" on certain movies and shows.
The issue isn't the home theater setup, as I have several other components that use it (AppleTV, Bluray, Xbox, etc.) and the audio sounds perfect from them.
The only device that displays that poor audio is the FiOS Set Top Box and even then it's only on a few channels.
I thought maybe that the optical audio cable between the set top box and the receiver may have been bad, so I replaced that. Same problem even with the new cable.
The problem is either with the Set Top Box itself or the audio levels on the stream from the channel provider.
Has anyone experienced anything similar to this, and if so... did you resolve it somehow?
Any help you could provide would be most appreciated.
Thanks!

Check the following.
Help & Settings > Settings > Entitlement Information
Here are possible entitlements mapped to channels.
101 - 104 : PSB HD
407 - 433 : Essential Extra / Unlimited Extra
446 - 453 : HD Extra
501 : Sky Sports 1
502 : Sky Sports 2
507 - 509 : BT Sport SD
510 - 512 : BT Sport HD
513 - 514 : Essential Extra / Unlimited Extra
530 - 540 : Sky Movies
555 - 563 : Kids Extra
You need 'HD Extra' for channels 446 - 453. I have the free 'BT Sport HD' but that does not cover entertainment HD channels. You need to subscribe to the HD Extra bolt-on for £3 for them. Have you ordered HD Extra (it only became available from last Sunday)?

I have a small problem with MSI GF4 MX 420

Hi,
I have a small problem with MSI G4MX420-T(S+C) ( MS-8878 ). Exactly with nVidia WDM Video Capture (universal), which " can't be turned on " by Windows XP.
I have also new drivers ...
Could someone help me?
Asus A7V333
Athlon 1700+
128 MB RAM
Thanks !!!

If you only have 10 seconds of content in a 15-second composition, then you need to either add more content or shorten your composition.
You can shorten the composition by changing the duration in the composition settings.
Since you're obviously very new to After Effects, I very strongly recommend that you start here to learn After Effects.

[Athlon64] Problem with MSI RS480M2-IL

Hi all,
I have problem with MSI RS480M2-IL. My problem is My temperature is very high... around 55-60c ... i am using AMD 3000+ Venice and no OC... and SpeedFan unable to detect my Voltage usage... Aida32 also same... 1 more thing is when i tried to run SiSoft Sandra 2005... it will take alot of time to load, sometime will just hang. i Test PCMark04 and found only got 3k for average mark... my friend getting 4k+ and we are using same spec... Below is my Spec:-
MSI RS480M2-IL
AMD 64 3000+ Venice E3
Bios Version 3.8
Geil PC3200 DDR400 2.5-3-3-6
Maxtor 60GB HDD 7200RPM 2mb
Verudium Power Vortex 420W
Hope some one can advised me what to do... my score too low and my board detect temperature and voltage is not accurate... Hope MSI Engineer will look thought and help me... Thank for Viewing !

the underlying "Who's fault is it?" question: AMD64 VENICE CORE (E3) PROCESSORS? or MSI RS480M2-IL MOBOS?
so far, ALL users with this proc/mobo combination HAVE the high (or incorrect) temperature issue. replacing the mobo obviously will not resolve the issue but replacing the proc with one that is NOT a Venice E3 core, does the trick. but of course, not everyone will have the privilege of exchanging their damned proce via the retailer specially if it's beyond the first 21 days of purchase.
in my case, my retailer refused to have the E3 proc replaced with the 'corrected' E6 version no matter how hard you explained the known issues with the E3. no chance of AMD recalling the E3 cores since problems with are only isolated to the particular MSI RS480M2 boards.
so for users that are and will be stuck with this combination, what is the solution then to the temperature issue? in my opinion, it's up to MSI to perhaps release a bios update that will correct this. another important thing to consider is the question: IS MY VENICE CORE INDEED OVERHEATING OR IS IT JUST THE MSI MOBO SHOWING INCORRECT READINGS? the proc overheating in actuality is obviously a lot different thatn just having an incorrect bios temp readings.
based on what i have observed, my Venice core displays the correct cpu temps (33-35*C) when being used on a MSI K8 Diamond mobo. placing the proc back to the R2480M2 board shows a very unusual 61-63*C bios cpu temp. furthermore, if i touch the stock heatsink/fan cooler that i have (for both motherboards), it really does NOT seem to be extremely hot to think that the cpu is actually overheating. in addition, my system using the RS480M2 performs well and has no spontaneous shutting down problems whatsoever. of course, my sense of touch is not as accurate as a thermometer but more or less, if you consider all the points i mentioned, most of us can say that the whole issue is just a matter of incorrect cpu reading.
perhaps the ATI chipset is the one to blame since i have notices as well that the Venice core processors do not seem to have this high temp problems with MSI's K8 mobos with the NVIDIA chipsets.
one last question: so do you guys think that this problem can be resolved by a simple bios revision? (as a dell tech guy, i do know for a fact that bios updates resolves overheating error messages in Inspiron/Latitude laptops)

MOVED: Need help with msi mega 180 + athlon xp-m combo

This topic has been moved to Overclockers & Modding Corner.
Need help with msi mega 180 + athlon xp-m combo

AFAIK, you shouldn't need a pinmod for a Mobile Athlon XP CPU to work in a nforce2 mobo
did you have any other CPU installed prior to this one? if so, refer here to clear the CMOS: Clear CMOS Guide
next, refer to your manual, or download from MSI, for location of the FSB jumpers; ensure J8 is shorted across pins 1-2, and J7 is shorted
finally, enter your BIOS setup menu, and under Advanced Chipset Features, set CPU FSB to 133mhz (or even 166mhz if you have DDR333 memory). the only thing i can't see in the Mega 180 manual is where you set the multiplier...
which is where the BIOS has limited overclocking features, and you might have a problem here
i think i'll pass this over to the Overclockers forum, where someone may be able to give a better answer....

MOVED: Audio Problem with MSI G45

Similar Messages

Maybe you are looking for