MOVED: Big problem with the bios

This topic has been moved to BIOS.
Big problem with the bios

You're not alone... https://discussions.apple.com/thread/3391947?tstart=0

Similar Messages

K8N Neo2: Another problem with the BIOS 1.9

I flashed my K8N Neo2 with the BIOS 1.9, I lost the MAC address of the NVIDIA NIC. I fixed the problem reflashing the BIOS with the /nvmac:XXXXXXXXXXXX /wb options. Loaded the default settings and set the boot priority, the new BIOS is unable to boot from my Adaptec 19160 SCSI controller: it try always to boot to the NVIDIA NIC. It seems that the NVIDIA NIC has a higher boot priority than other external boot devices and it's impossible to change it.
The settings are:
First boot divice: Floppy
Secind boot device: Hard-Disk
Third boot device: CD-Rom
Hard disk boot priority:
1. Adaptec SCSI
2. NV RAID
3. Other boot device
I reflashed the BIOS with the old 1.8 and now the system works well ...
Thank you for the attention

See Thread this index called "Neo2 bios flash to 1.9 = dead nvidia lan"

X100e problems with the BIOS update

Hello, this is my first message and my english is not so good.
I have a problem on my X100e to make a BIOS update.
I download the newest update from Lenovo and burn a CD.
At next i boot from this CD with the X100e and the update starts.
But after a few second comes the message the file is damage.
So i try this with different update versions, but it is still the same result.
My BIOS version now is 1.04
What is my mistake?
Best wishes
deti330

Thanks for your quick response.
Quote
Originally posted by wonkanoby
is cmos jumper on keep and whats vbat showing in pc health
Should`nt the jumper be on keep by default?
vbat(is that the same as battery in the pc health menuP): 2.96
Dacourt

Problems with the BIOS clock

Hey,
I`ve just purchased the MSI 875P mainboard. The board is running smoothly with bios version 1.4, but there is this small and anoying problem; The bios clock will not work. I set the time and date in the bios and when I go back in five minutes later the time and date are exactly the same.
Anyone else have this problem and is there a sollution for this?
Dacourt
Raidmax case
P4 2,6HT 800 mhz fsb
MSI 875P Neo-FIS2R
Geil 512 DDR ram 400 mhz
Creative Riva TNT2 which will be replaced with the Sapphire Radeon 9700 on monday
Samsung syncmaster 172t LCD

Thanks for your quick response.
Quote
Originally posted by wonkanoby
is cmos jumper on keep and whats vbat showing in pc health
Should`nt the jumper be on keep by default?
vbat(is that the same as battery in the pc health menuP): 2.96
Dacourt

MOVED: big problem with K8n neo 4 platinum

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=96767.0

That battery deal is so freakin' weird...
I've had my Neo4 Plat for about 3 months & the batt. reading in the BIOS says the same thing as the day I installed the mobo.
Very strange, that it's so "hit & miss".

Lion: big problems with the network!

Since updating to Lion, I am experiencing difficulties with the network. My Kyocera task alfa 2500 cannot communicate properly with the Mac: it does print but cannot send scan to the Mac, it is just impossible for the printer/scanner to find the Mac. I hear it could be a problem with FTP which is not supported by the new OS Lion. How can I solve the problem?? Or is Apple going to resolve this problem????

Well, the problem relates to the Rosetta program eliminated by Apple in the Lion OS. When you try to rum the KM Scan to Mac.app you get:
"You can't open the application KM Scan to
Mac.app because PowerPC applications
are no longer supported."
So, I guess we (I encountered the same problem) will either have to wait out Kyocera-Mita for a scanner driver app, attempt write a new KM Scan to Mac.app for the Intel Macs; wait for somebody else to WRITE a new KM Scan to Mac.app for Intel Macs or just ***** about it.
Not a rosey situation.

HT6195 Big problem with the last security update, how can I solve the problem?

Yesterday I installed the last system update in my secondary computer, a Macbook Pro (OS 10.8.5, if I remember well), from that moment is impossible to restart it. How can I solve the problem?
Today Apple is worst than Windows, but is considerably more expensive! I am seriously considering to change to Windows, in less than 3 months I had serious problems with two Apple computers and I changed 4 computers (always Apple) in less than 6 years.

tmjavier,
feel free to use whichever operating system best suits your needs. Since this is a user-to-user forum, whether you use OS X or Windows will affect no one’s bottom line here.
Regarding your MacBook Pro, you can try booting it into Recovery mode by holding down a Command key and the R key as it starts up. Once the OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to reach the login screen now?

Big Problems with the Serial Port

I'm Spanish and my English is not very good, I'm sorry but I need your help.
I want to connect two computers (my desktop and my handbook) with the serial port (COM2 in both sides).
I have the cable.
I have installed JBuilder 7 in both computers.
I have installed "commapi"
I'm running SimpleWrite.java (the example from Sun) in one of them and SimpleRead.java in the other.
I don't get in any moment receive any data.
I execute first SimpleRead and I can see what this process is waiting something. After, I execute SimpleWrite (many times), this process star and stop correctly but never the first aplication receives nothing.
I am trying for four days, I am desespereted.
I need your help is very important to me. I don't understand what is happening!!!!. This is my e-mail: [email protected]
Thank you very much.
NOTE: my handbook has just one serial port, before had a winmodem but it was eliminated.

hi,
when your notebook has only one port, how do u know that this port is COM2? I think u gave a wrong parameter for the SimpleReader or SimpleWriter so one send data to a port (say COM1) but the other receives data from another port (say COM2).
regards,
eedych

Problems with the postal code in address iview ESS.

I would greatly appreciate if someone answer this threat. I am having this big problem with the address iview. It is not possible to change the postal code in the address iview.

Can you explain the issue? Means for which country this issue is coming. We faced similar issue. There is some bug in ESS/MSS package itself. You send me details of issue at [email protected] I will reply you back with OSS message answered by SAP if that is a bug.

Problem with the synchronization by Desktop Software (6.1.0.35)

Hi, i have a big problem with the synchronization by Desktop Software (6.1.0.35).
When I installed DS i set to folder sync photos not as
... Documents / BlackBerry / photo (created by default),
but i chose
... Documents / Pictures / Photos from the BlackBerry (created by me).
Basically now I try to change the import folder of images, but it appears the error that is
"Can not set a folder to import to a higher level of import folder"
I tried deleting / Photos from the BlackBerry, and not finding my DS it says:
"The import folder is not available ... etc.." and tells me to change it or with the button or the Media tab of the Device menu> Options.
I do it but the message is always the same: "Unable to set a higher level of import folder to import folder"
I find it an absurd bug and ask to help me solve it. Thanks

Well folks. I've had enough.
The 9780 is a great phone, it's easy to use, practical and dependable. However, the Desktop Manager software has been giving me too many sleepless nights. On two occassions I must add: once at the end of last year when I bought it and only managed to solve it by myself after 4 weeks of trawling through online forums, blogs and other BB help sites and the recent one was last week when I tried to install it on my new Windows 7 notebook.
I know this is not entirely the fault of RIM, Microsoft also has a part to play. But considering the state of technology these days, it shouldn't have to be so difficult. I want a phone and software that makes my life easier and not have to be a slave to it by trying days and nights to solve its problems.
Hence, I have officially decom my phone and gotten an iPhone 4 instead. The switch ain't that difficult for me as I have always been platform neutral. As long it fits my needs, does it job well and doesn't give me too much headache, I'm cool with it.
Ciao folks!

A big problem with using endnotes in Pages 5

Unlike Pages 09 which worked flawless with endnotes functionality, Pages 5 has a big problem with the feature that maybe been addressed.
When I insert an endnote, I am prohibited from clicking the citation number at the end of the document which is supposed to take me back to the inserted citation.
Am I doing something wrong here or this is just another invaluable feature removed by Apple?
Please help!!!
Thank you.

It's not a feature I use much, so haven't worked at finding the flaws in the Pages 5 version, but going on just how badly Apple has done everything else in Pages 5 I am not at all surprised. It had problems from the beginning and Apple has take over 15 months to do frankly very, very little to fix anything.
There was much heated debate by certain people on this site who swore blind that Apple would fix everything.
Just remember the definition:
Pessimist: n. Optimist with experience.
Peter

I need your help with the Bios password!

Hi,
I'm using a satellite l305D-S5895 and i have a problem with the bios password. I was setting a password in the Bios or CMOS ( i don't know exactly). Every time i start up my computer, a blue box appears and ask me for the password. I know the password but I think it complicated and i want to take it off, and clear it. Please help me with that. If you guys have a way by turn of the battery or push the reset key inside the laptop, please give me some pictures to show that. Thanks a lot.

This does not sound like a Toshiba Bios password. The Toshiba passwords come on a black screen with white writing and say "Password =". Toshiba Service Centers have the tools needed to remove the password. provided that you can prove the computer is yours. So bring a proof of purchase and be prepared to pay, because password removal is not covered under warranty.

Big problem with photos after update to iOS 4.3

Hi everyone,
I have a big problem with the photos on my iPhone 4 after updating to 4.3
There is not enough space for them, anymore. Before the update I had about 9000 photos synced with iTunes -and I had about 10 GB free. Now, iTunes can't sync the photos anymore because there is not enough space on the iPhone??? The same amount of photos does not fit anymore. I suppose there is an error in the Itunes photo compression module. Anybody else with the problem? Any suggestions for a workaround?
Thanks, Olaf
Update: The same number of photos is taking up three times as much space than before.
Message was edited by: olafoio

Me too, but I have the solution.
There seems to be 2 problems. First, for some reason your data is taking up more space post update, so if you were close to filling your device, you now overrun. This isn't well handeld by iTunes, but doesn't seem to be the biggest problem as I'm sure that would sort itself out if you could just get it to sync.
The root problem is the 2nd one - the missing file. Mine was a photo, but it took me ages to find it and you're not going to like how I did it. I started to untick things to sync one by one (music first) and attempting the re-sync. I found that it was a file in my photos that was causing the problem, so I removed those and then re-loaded everything back up and I'm now OK again. I use Aperture to sync with.
I had the same problem with the last OS update and it's a pain because it takes ages to sort with a nearly full 32G device.
Now onto my iPad for an update, but that's proving to be a non-starter as the thing wont back up due to "another session in progress". More rooting around to solve that I guess......

Big problem with KT3 Ultra (ms-6380e v1.0) after flashing the BIOS (de

Hello out there.
I have a real complicated matter with my Kt3 Ultra board.
Used to work fine, but after I flashed it with the latest BIOS (5.7), the board has this strange behaviour: when I clear the CMOS, the board boots up, when I change & save the settings, the board does not "come to life"(black screen & beeper silent).
It has also this weird problem: it shows garbage charaters on the voltage setting of the CPU. Instead of voltages (i.e. 1.750 etc. etc.) I have only "scrambled" strings.
I had MANY difficulties in upgrading the BIOS because the AMI-flashing utility kept telling me "bios protection enabled) (but there was NO bios-protect setting in the previous bios - I checked a zillion times)...but after trying with different revisions finally I made it.
I already tried everything (re-flashed older bios-es etc. etc.)and I'm starting to feel beat ... if you have any advice, please le me know.
It would be really SAD to put this great board in the garbage-dump....
Bye,
Wyk'03

im having problems with this board as well,
i had no problems with the flash,
i did this...
boot to win me floppy,
copy the flash files to ramdrive, flashed to latest bios..
now windows hangs when i have my ac97 audio enabled in bios...
I WANT MY AC97!
hmmm can you get to a dos prompt from a boot disk?
try re-flashing with 1.0 again and then disable the cmos virus protection thingy, and yes it was there it was in the 1.0 bios on the main screen.

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

MOVED: Big problem with the bios

Similar Messages

Maybe you are looking for