MOVED: bios change history neo k8n v2.0

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=140626.0

From the link u posted:
Quote
PS-CM-450Wpad $14.99, 2 for $27.98, 10 for $109.90
I think u just set a new record for the cheapest PSU ever used on this forum 
Get a decend one  !!!
Why do you think most exprienced members here have a PSU that costs at least 4 times the amount u paid ?
Here is mine:  http://www.newegg.com/Product/Product.asp?Item=N82E16817151023
I gladly payed them 100 bucks for the efficiency, stability and safety features on it, cus i don't want my valuable gear to get demaged (again !!) by some crappy PSU.

Similar Messages

  • MOVED: BIOS Updated: P45 Neo 3 (MS-7514) cycling shutdown after start

    This topic has been moved to BIOS.
    https://forum-en.msi.com/index.php?topic=141869.0

    Quote from: colonel_butt on 22-July-08, 19:52:57
    just FYI
    My board came with bios 1.1
    I swapped if out with my old gigabyte, also upgrading the CPU to a Q9300.
    I reused everything else, including my nvidia 8800GT and corsair memory.
    I also have 4gb corsair (2x2gb sticks), but they are corsair value sticks
    I had vista x64 installed on the harddisk.
    when I switch on everything went fine. I installed the vista intel drivers off the supplied CD and it restarted and everything worked fine.
    So sounds like your MB may be faulty, or there is something touchy about your RAM.
    (note: i upgraded to 1.3 and switched to Sata and it stopped recognising the nvidia graphics driver. SO I flashed back to 1.2 and IDE and it all worked again).
    PS: I can swap out my RAM fine with the graphics card in, its a tight squeeze, but there is no extension on value ram.
    Your observation about BIOS 1.2 versus 1.3 makes me wonder, even though you're running Vista and I'm using XP, BIOS issues are BIOS issues, regardless of the OS. My Corsair memory works perfectly now that I've re-flashed the BIOS to the same exact version, and this system is now 24 hour Prime95 stable. I can't figure out what the heck is up with the Nvidia drivers and my 8800 GTS 512, though. Maybe it's a BIOS issue? I could always try flashing the 1.2 and see if the system will stop black screening as soon as it attempts to load any Nvidia driver higher than 169.06.

  • Bios from my Msi k8n Neo Platinum (socket 754)

    Wich is the last beta bios  from my Msi k8n Neo Platinum (socket 754) ?
    And where download?
    Thanks

    A thread here , from when 1.56 appeared:
    MSI K8N Neo Plat Beta Bios 1.56
    and when 1.55 appeared:
    New Bios For MSI K8N Neo Platinum [ 1.55]
    Seems to me that the 1.5x series were focused on chipset timings and ram .
    Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
    Beta bioses don't come with a changelog , they leak out . So any complete
    list of changes is not possible to provide.

  • MOVED: Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

    This topic has been moved to AMD64 nVidia Based board.
    Best BIOS setting for MSI K8N Plat + AMD 3000+ Venice + Geil Value RAM

    If you want SSE3 support and you do not overclock, Bios 1.4 is the only one officially available (1.41beta is not official).
    Try to upgrade to 1.4 and see it for yourself, do the upgrade with floppy in DOS so that you can save your old Bios.
    I would rather wait till mid June when a less troublesome new bios is suppose to be availabe for NEO4 MBs.

  • LiveUpdate broke the bios on a MSI k8n neo v2.0, need bios and recovery files.

    LiveUpdate broke the bios on a MSI k8n neo v2.0, it need bios and recovery files. I do not know the serial number. The ERP is 070.  Its a "k8n neo v2.0" "ms - 7030 ver: 20c" mainboard.  I don't know the previous bios version.  The computer prompts for a recovery disk during an AWARD BootBlock BIOS v1.0 initialization.
    Thank You.

    Here it is
    [K8N Neo V2.0 series ==> 601-7030-070/080, BIOS 5.xx]
    Sign On: K8N Neo V2.0 Series W7030NMS V5.4 031506 14:55:37

  • Neo Platinum won't post after BIOS change...

    I changed a few BIOS settings in my machine.  Everything was working fine before; all I switched (to my recollection) was changing the boot order and also switching from Manual to Automatic for High Performance Timings (named something like that).
    After doing this, the machine won't even POST; I get a ~2 second long beep shortly after turning the machine on, and this beep repeats with a ~2 second pause between each beep.
    I have tried:
    - taking out the memory in bank 2
    - taking out both DIMMs
    - doing the JBAT1 CMOS reset (pins 1-2 going to 2-3)
    - doing the 'remove the battery' CMOS reset
    - doing both the JBAT1 and battery reset approaches, leaving it in 2-3 and battery out all last night
    After all of these, there was no change -- I still get the beeps.
    D-Bracket seems to have the bottom left light red, and the rest green, if I recall.
    Any guesses?  Thanks.
    Corbett
    MS-7030
    Athlon64-3000+
    1 GB RAM (Corsair Value Select)
    Leadtek 6600GT 128MB
    2xSeagate 200 GB PATA
    NEC-3550A
    Antec Sonata

    Ah, to clarify -- I looked at the Basic Troubleshooting Guide for the exact description of what the D-Bracket is showing. It looks to be "Initializing Keyboard Controller".
    Maybe someone else knows -- in the list of all of the D-Bracket codes -- which are meant to be green and which are meant to be red? (As the page has white and black..so I'm trying to confirm that I'm right in mapping correctly between white/black and red/green; if my mapping is backwards, then it really means "Assign Resources to all ISA").
    As for possible memory issues -- if I hadn't changed anything in the BIOS other than memory timings -- wouldn't resetting the CMOS have gone back to default timings (which were working a-ok until I made that BIOS change).  (Plus, I don't have any other RAM, so I'm looking for other things to also try

  • Table that captures change history of Ownership of Tranport Requests.

    Hello Folks,
                        I have been trying to locate a table that captures change in ownership of requests. I've tried Transport organizer transactions SE01 (extended view), tables E070 and E071 and SE03 but without success. Is there a table which captures change history of ownership?
    Regards,
    Prashant

    Hello Krishna,
                          This option would only work when table logging is enabled. Not otherwise. To give you a gist of my problem, one of the users from the client side created a request (authorization side is in a mess so business users also have access in Dev systems with lots of auths). He later instructed one of out functional consultants to tranfer the request from his name to the functional consultant's name. The request was later released and moved to Production system. Now the user from the client side denies that he ever created a request. (Audit issue now) and its going to snowball.
    Is there a solution.
    Regards,
    Prashant

  • Moving price change

    hi,
    in invoice
    in accounting,
    vendor is credit
    and freight charges is debit
    and also stock account is credit and matl price differnce is credit in same invoice
    then what is effect in moving price

    Hi,
    check the current MAP in table for MBEWH . chk this value and compare to ur mat master a.c 'ing view value
    also check tcode S_P00_0700139 this will give the complete details abt the map changes history
    Regards
    KK

  • Report for Sales Order Change History   CDPOS and CDHDR

    How to take a report of the data for the Sales Order Change history for a particular period of time. It is required to take a report of all the Sales Orders for which the basic price has been changed. Please let me know the procedure. I could not get the data from the table CDPOS and CDHDR
    Helpful answer would be rewarded.
    Regards
    Praveen

    Dear Praveen Kumar
    Have you tried with VBAP where sale order details at item level would be stored.
    Moreover, to my knowledge, there won't be any changes as for as pricing is concerned at sale order level but there is at billing level.  Normally, any price increase / decrease would reflect in billing.  So why dont you to table join through SQVI VBAP (for sale order details) and VBRP (for billing details) so that you can compare the selling price in sale order with billing. 
    Thanks
    G. Lakshmipathi

  • BP telephone and mobile change history report

    Hi,
    Requirement: We have a new requirement to create a new report that will display the change history of a customer who has done changes in their mobile or telephone number during a specific period.
    My approach was:
    Read the cdhdr data based on the objectclass objectID and udate.
    Read data from cdpos for all records from cdhdr.
    Consolidate and display the report.
    All data is coming correct except the type of telephone.
    I am not being able to distinguise between the telephone type ( mobile or telephone) using the fname field of table cdpos.
    When we insert mobile/telephone thru XD02/XD03, the entries in fname field in cdpos are as TELF1 for telephone and TELF2 for mobile. But when we modify or change the telephone or mobile, each entry of table cdpos in field fname is TELF1 or TEL_NUMBER.
    How can we differiantiate which type of telephone number is there in table cdpos? Is there any other change document table we can read to differiantiate between telephone types?
    Please suggest. Thanks.

    Dear Hemanth,
    It does not appear in CDPOS because Data element /SCMTMS/INVOICING_STATUS_CODE does not have CHANGE DOCUMENT enabled.
    I have also seen there is no such field to determine invoice status in /SCMTMS/D_TRQROT  or  /SCMTMS/D_TORROT tables. But we have appended customer specific fields to update the Invoicing status. You will have to do the same if you want.
    For quantity, Distance and duration, yes they appear multiple times.
    However, the only way is to reduce the number of records is to put a filter on CDHDR-UDATE (Creation date of the change document).
    You can also add Change document number additionally to your report selection criteria to improve the result.
    Thanks,
    Bharath.K

  • Long time to open tab "change history" of  business partner in Web_ui.

    Dear experts!
    Long time to open tab "change history" of  business partner in Web_ui.
    4 records were opened for 10-20 seconds
    http://imglink.ru/show-image.php?id=22083a6a576f78c66c86863bf6b0573b
    1. In what may be the reason?
    If the records are many, the discovery may be more than a minute.
    2. Is There a report for the purification of the " Сhange history" over a period?

    Hello Dilip,
    One more alternative would be to increase the time out parameter in ABAP environment.
    The steps to change this parameter:                                                                               
    1) txn: RZ11 -> enter the variable name rdisp/max_wprun_time                      
    2) Display -> Change value -> Then input the value you would like        (ideally 3600)                                                                               
    PS:                                                                          
    1) Don't set this value too big, otherwise general performance will be       
    influenced, since lots of dialogue process will be occupied for a long       
    time                                                                         
    2) This parameter can be changed dynamically                                                                               
    Once the parameter is set please test again. You can try incremental         
    values and test which one does not give timeout error.                                                                               
    please refer to the note 25528 for more details about RZ11.   
    Hope this helps!
    Thanks and Best Regards,
    Shanthala Kudva.

  • Report for PO Change History

    Hi All
    Is there any standard report for getting the change history of PO's?
    Regards.

    Hi U can use this FM.
    ME_CHANGES_READ
    and ME_READ_CHANGES_EINKBELEG
    example
    call function 'ME_CHANGES_READ'
      exporting
        document_category = it_ekko-bstyp
        document_number   = it_ekko-ebeln
        date_of_change    = it_nast-datvr
        time_of_change    = it_nast-uhrvr
      tables
        xcdhdr            = it_cdhdr.
    кu03B1ятu03B9к

  • How can I display append changes history of a multiline textbox in custom form?

    I want to display changes history of multiline textbox in custom aspx form as normally display in standard dispform.aspx and editform.aspx page.
    How can I do this?

    Hello
    It seems you want to get the versions of multiline textbox, see following article, may help you
    http://www.mtelligent.com/journal/2007/10/17/the-insanity-of-getting-versions-of-a-multilinetext-box-set-.html
    Keep us  updating.
    Ashish Kanoongo, MCP, MCSD, MCTS

  • How on earth do I update my Apple ID to my new email address? I keep getting moved to 'change my password' sites, but I have a new email address and  need to update my Apple ID.

    How on earth do I update my Apple ID to my new email address? I keep getting moved to 'change my password' sites, but I have a new email address and  need to update my Apple. Frustrated!!

    Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
    Create a new email address, for example  at Yahoo or Gmail, or anywhere convenient (or you can use an existing address as long as it has never been associated with an Apple ID).
    Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
    Where it says 'Apple ID and primary email address' and gives your current ID email address, click 'edit'.
    Enter your new address and click 'Save changes'.
    Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
    Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in.
    I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.

  • Toshiba Satellite p75-A7200 stuck on toshiba logo after bios change

    My Toshiba Satellite p75-A7200 is stuck on toshiba logo after bios change.
    entered bios fine changes from UEFI to CSM boot and now i cannot enter bios or boot past toshiba logo.
    Ive tried F2 tapping and holding while powering up the laptop(tried every Fkey,DEL,ESC, with and without FN key)
    cannot re-enter bios.
    Also i tried to run the bios update cd created multiple  1.50 1.40 even 1.00, it doesnt seem to read any media.
    i tried holding C, FN+C and f and just about every key on the keyboard to get something to work. i had dvd as top of boot priority for a while now so i shouldnt have to try f12 or holding C before boot but i tried . it doesnt seem to read any media
    i tried windows 8 install cd, Ubuntu, centos, nothing goes past toshiba logo and no errors, i dont get the non bootable device error so its seems to not be reading the dvd. (dvd does spin and make read noises) im trying to find my usb floppy drive to try a floppy version but it acts like its not reading any media.
    I also pulled the HDD and all usb devices to make the dvd the only media available and with the HDD out it spins then toshiba logo then black screen with solid white  horizontal curser on top left of screen.(only happens when hdd out)
    is there some type of key combination that will force a bios update or a crisis recovery mode for bios.
    I also Pulled the battery for 2 solid days(battery,cmos battery, and power supply and held power button for about 10 mins while watching tx to make sure the thing was drained before the 2 day sit with no power at all.
    this happened the second i changed from UEFI to CSM boot so its not a motherboard problem or anything like that because all was well before this setting change.
    I already pulled the HDD and backed it up to another drive and swapped it to elimiate that.
    any ideas on a secret key combo to force a bios read from dvd or usb or anythng.
    or another combo that im just missing to enter bios after CSM boot.
    UPDATE
    to do a crisis recovery on this laptop
    1 get a usb stick and format it in fat or fat32
    2 download "7zip" and install it if you dont have it.
    3 download bios from toshiba website.
    4 run the installer for bios but dont choose and option just close it we just want to extract the files to the location normally  c:\splnvxxx where xxx is the version number like 150
    5 goto the installed locaion "c:\splnv150" or whatever number.
    6. find file os2014273a_150 or something similar. it will be an application, it will end in version number _150, and it will also have a disc image file of the same name. but we want the app. 
    7. right click on it and you should have an option 7zip then extract
    once extracted there is a folder now archesxxxxxx_bios_v150_win 
    8 copy the bios file located in archesxxxxxblahblah/X64/BIOS.fd , BIOS.fd is the bios and just copy that to a BLANK usb thumb drive that was formatted with fat or fat32.
    9. put usb into your satellite and unplug the power from it.
    10 holding FN + ESC key together plug the power back in and press power button.
    11. release keys FN and ESC if all is right it will have the power button and led on from blink abut every 1 second while it searches for the bios. once its done it will reboot and you should be good to go.
    if it keeps cycling with the power button then the bios is named wrong or something is not right with the usb. try reformatting it again and make sure that the bios file is the ONLY thing on the drive.

    Ok a little research and digging into the bios exe downloaded from toshiba shows this has INSYDE BIOS witch should have a recovery process wich i prepared a usb stick with just the bios.fd on it found some post around toshiba forums with different models using win +B or Fn + F but neither of these worked for me to force bios update
    anyone with this model know the key combo to force recovery

Maybe you are looking for