MOVED: Building my own PC - preparation for attempt 2!
This topic has been moved to Anything Under The Sun.
Building my own PC - preparation for attempt 2!
You realize this isn't the MacBook Pro forum, right?
Similar Messages
-
After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?
Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
I backed up my iphone 3 in preparation for moving to iphone 4S and before i changed the sim card I discovered my notes had been wiped! It looks like this is quite common but can anyone tell me where the notes I backed up on itunes would be???
In the iPhone backup. Right click on the phone in iTunes and choose "Restore from Backup".
-
ITunes Connect: Can't get out of "Prepare For Submission" state
My app is currently stuck in "Prepare For Submission" state.
I click "Submit For Review", then answer the 3 questions, then click "Submit".
Then it just spins for 5 minutes or so and reloads and I'm back where I started. "Prepare For Submission" again. I have already uploaded a binary and everything seems good to go.
The previous version of my app was rejected, so I updated the version number and am attempting to resubmit a new binary on top of it. Perhaps this is related to the issue? I tried this in Chrome as well as Safari with the same result.
Any help would be greatly appreciated.
Thanks!Update: I created a new build, bumped the version and tried again. This time it worked. Who knows...
-
Preparations for Consolidaton Group Chanes Process
Hi all
does any one ran Preparation for Consolidation Group change task @ Consolidation Monitor where moving OLD CONS GROUP to NEW CONS GROUP with mimimal changes in other words, as it is to NEW GROUP( change in PARENT UNIT)
my questions:
1. do we need to make any adjustment entries until AFD? think no Change except Parent Unit will change from OLD to NEW
2. Ending period is NEW CONS GROUP Creation @ CG master data level because the same period for PREP Cons Group task
3. how to handle Goodwill in this process where subs were 100% owned by parent units.
appreciated your comments/suggestions/help in advanceHi Dan
item No.2 is I have made ending period as 006/2009 for OLD CONS GROUP for all CONS UNITS
Yes, New CONS GROUP is 006/2010 to 012/9999
Please clarify one more thing:
CG1 001/2008 to 006/2010
CU-1 -> PU
CU-2
I....... CG21
CU - 2 ..> PU
CU-220
CU-221
I..... CG2210
- CU -221 ..> PU
CU -222
CU-3
new group: 006/2010 TO 012/9999
CGA 006/2010 to 012/9999
CU - A ...> PU
CU-2
I....... CG01
CU - 1 ..> PU
CU-220 A
CU-221A
I..... CG2210A
- CU -221 ..> PU
CU -222
CU-3
Question: Now in New CG01, CU-1 is no longer TOP PU and its CU-A ( which exist in 006/2010)
What is the process now? still need a transfer and or just ending for CU-1 as 001/2008 to 006/2010
appreciated your comments/help -
I have completed the installation of Windows 7 Ultimate (64 bit) using Boot Camp Assistant on my MacBook Pro (MBP) 13-inch with 250 GB HDD (stock) and 4 GB DDR3 1067 MHz (stock), which I got in June this year (2010). So, when installation is complete, the setup asks you to restart.
So, I restarted my MBP and booted into Windows 7 Ultimate. The Windows symbol came out and after that the screen changed to the screen with the words "Setup is preparing for first use" and a bar that glows beneath it (with the glow moving from left to right and changing color through the spectrum of light). However, the setup hangs or freezes in the middle of this. This mean that the glow doesn't move and the screen does not change.
Can anyone help? Thanks in advance.I don't know the particulars of the MBP but there should be other threads and users. It does not seem to be normal.
This is retail DVD and not an ISO downloaded and burned that came from school? otherwise you may need to re-burn the DVD.
See if it loads in Safe Mode
Reboot from Windows 7 DVD
May need to uninstall a device driver
After Windows is installed you'll need your OS X DVD to install/add Apple drivers and services
One you do have Boot Camp 3.x installed on Windows,
Boot Camp Update for MacBook Pro (13-inch, Mid 2010) (Windows 64 bit)
http://support.apple.com/kb/DL1044
http://ourcoffeestops.com/2009/01/guide-windows-7-x64-build-7000-on-a-macbook-pr o/
http://blog.andersonshatch.com/2008/04/13/macbook-pro-and-vista-64-bit/
http://www.apple.com/support/macbookpro/
http://www.apple.com/support/bootcamp/
It could be a disk error, in which case CHKDSK or start over and when you format NTFS, instead of quick format, use full format with option to map out bad blocks. And that is IF it is disk drive error.
I had an error once but it was after I had been using Windows, and I had a 2nd user account I could login and correct the problem with the first account (folder needed was read-only and likely disk I/O error).
I favor Windows 64-bit, but you may want to try 32-bit instead, and unless you plan to add more RAM, shouldn't make any real difference. Retail copy comes with both versions on DVDs. -
I want to know what to expect in terms of moving from one OS to another. Having been a Windows guy until last summer, my only experience is going from one version of Windows to another, which is usually a fairly costly purchase. I will want to go to Lion, but as a retired teacher, my income is fixed. I am not looking for a specific price, I am sure that is unknown, but I would just like to know help Apple does these things so I won't be sadly surprised.
Historically Apple has sold OS X upgrades via DVD media however with the advent of the Mac Apple Store that throws another possibility into the mix. That's about as much as I can say as these forums don't allow us to speculate about future products. As for the cost historically Apple has priced OS X upgrades between $29-$129, the last upgrade (Snow Leopard) was only $29 but that was an exception. Again we cannot speculate on these forums about that. The good news is that Apple is unlike Microsoft which makes OS upgrades expensive and complicated. The choice with OS X is do you want a server version (most users don't need one) or a single computer license. The users that buy server versions tend to have a number of Macs they manage from a server, most consumers don't have this issue.
Keep reading the news, as you know Apple has announced a Summer release for Lion.
Upgrades on OS X are usually very simple. I've upgraded from Tiger to Leopard to Snow Leopard and each transition has been very easy. With any major OS upgrade there are some basic rules to follow, for example always, always, always backup prior to any update. When Lion is released to the general public post again for what to do to prepare or even do a Google search on "How to prepare for OS X upgrade" and you will find a number of articles that will provide some suggestions and valuable insight. You can also re-post here and users will be happy to assist. -
Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name: Application
Source: MSExchangeRepl
Date: 28.09.2012 00:37:17
Event ID: 2112
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name: Application
Source: MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID: 2024
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User:
N/A
Computer: Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
- * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
MarkusHi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus -
I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"
Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work. -
Building a budget desktop PC for CS5 (under $1,700)
After reading most of the posts here and elsewhere about building a PC to run Premiere CS5 I decided to take a stab at assembling the components to build my own (keep in mind I have never done this before). Below are the items in my Newegg shopping cart followed by an explanation about why I chose them. Please note the prices are valid as of 8/19/10 and the ones with a * are the prices after rebate so the actual prices may be higher when you read this. I welcome any comments and suggestions:
MOBO: Asus P6X58D-E LGA 1366 - $229.99
I looked at the Gigabyte Mobo but some of the bad reviews really concerned me. The Asus seems to get much better feedback and is only $20 more.
Processor: Intel Core i7-930 2.8GHz 4x256KN L2 Cache 8MB L3 Cache LGA 1366 130W - $289.99
This was the easiest item to choose since everyone seems to like it.
Ram: G.Skill PI 6GB (3 x 2GB) 240-Pin DDR3 SDRAM 1600 - $199.99 - But I'm ordering two (12GB total) for $399.98
I have never heard of G.Skill memory but it seems to be the most popular and highest rated at Newegg.
PSU: Corsair CMPSU-750TX 750W - $89.99 *
Corsair seems to be highly rated although not perfect... several customers reported problems or DOA units. I guess there is no PSU maker that you can really count on.
Case: AZZA Solano 1000 ATX Full Tower - $59.99 *
My alternate choice is the Antec 1200 for $159.99 but the Azza gets very good ratings so with that price difference I am leaning towards trying it. By the way, I was hoping to get a mid-tower case but have concerns about my graphics card fitting so I guess I'll go with the full tower. Like Harm said elsewhere "bigger is better".
Video card: MSI N465GTX - $234.99 *
This was a tough decision because everyone here seems to recommend the GTX 470, yet the 465 is about $100 cheaper. I'm really wondering if I'll see a HUGE difference in performance between the 465 and 470. I may still go with the 470 if I can find one under $300. By the way, this MSI model has dual fans which I read elsewhere is better than the single fans found on most cards. Not sure if it really matters with all the fans included in the case I am getting. If it doesn't, maybe I should get a GTX 470 with one on-board fan?
System Drive: WD Caviar Black 640GB 7200RPM 32MB Cache - $74.99
I read how others recommend a smaller drive with 10K RPM but I may use this PC for other things besides video editing so I think I want the larger drive.
Video storage drive (internal): WD Caviar Black 1TB 7200RPM 32MB Cache - $94.99
DVD/CD Drive: LG 22x DVD OEM - $24.99
I don't have any plans to do Blu-ray anytime soon.
Wireless Net Card: EDIMAX EW-7128G - $19.99
Windows 7 Home Premium 64-bit OEM - $99.99
I haven't been able to see how the higher end versions of Win 7 improve Premiere performance.
TOTAL: $1,619.88
(I already own a monitor, keyboard, mouse and Premiere CS5. I'm also not including liquid cooling until the system is up and running and I see if I really need it.)
I had hoped to stay under $1,500 but I don't see how that is possible.
What do you think? I won't pull the trigger on this system until the end of August so feel free to offer comments and suggestions. This will be my first ever PC build and I'm kind of nervous about it but also excited about getting a system that will be a high performer for many years to come. Now I have to find some good websites that teach how to put all this stuff together!
Thanks!The following table specifies the limits on physical memory for Windows 7.
Version
Limit in 32-bit Windows
Limit in 64-bit Windows
Windows 7 Ultimate
4 GB
192 GB
Windows 7 Enterprise
4 GB
192 GB
Windows 7 Professional
4 GB
192 GB
Windows 7 Home Premium
4 GB
16 GB
Windows 7 Home Basic
4 GB
8 GB
Windows 7 Starter
2 GB
2 GB
465GTX
GPU Engine Specs:
CUDA Cores
352
Graphics Clock (MHz)
607 MHz
Processor Clock (MHz)
1215 MHz
Texture Fill Rate (billion/sec)
26.7
Memory Specs:
Memory Clock (MHz)
1603
Standard Memory Config
1024 MB GDDR5
Memory Interface Width
256-bit
Memory Bandwidth (GB/sec)
102.6
470GTX
GPU Engine Specs:
CUDA Cores
448
Graphics Clock (MHz)
607 MHz
Processor Clock (MHz)
1215 MHz
Texture Fill Rate (billion/sec)
34.0
Memory Specs:
Memory Clock (MHz)
1674
Standard Memory Config
1280 MB GDDR5
Memory Interface Width
320-bit
Memory Bandwidth (GB/sec)
133.9
Notice the Cores and Memory Bandwidth. That is why we recommend the 470GTX.
Eric
ADK -
When I go to share my Imovie to Itunes after a couple of hours I get the following message. "Unable to prepare project for publishing. That project could not be prepared for publishing because a error occurred(disk full)". What does this mean and how do I fix it?
This is the forum for iOS (iPhones and iPads),
I have refered it to get moved to the correct forum.
But my guess is that you have to clear space on your harddrive.
The video gets rendered when you out put it, so you will need lots of space to do so. -
Building an Admin Console Extension for a Custom Security Provider
I am looking for an example or a description how to build an Administration Console extension for a custom Authentication Provider.
Especially the creation page for the provider is interesting because I am not able to create and register the required Authentication Provider MBean.
The call “mbeanHome.getMBeanServer().createMBean(className,objectname)” always throws the following Exception “javax.management.ReflectionException: The MBean class could not be loaded by the default loader repository”
Even if I try the class “weblogic.security.providers.authentication.IPlanetAuthenticator”, that is part of the bea distribution, the same exception is thrown.
It seams that the Problem has something to do with class loaders?
When I use the standard admin console pages to create and configure my provider everything works fine.
The only example “kennedy0208.zip” I found in the net does not deal with the creation of the MBean.
It only customizes the edit pages for the provider and at that point the MBean has already been created by the standard admin pages.
Maybe the author discovered the same Problems and gave up!?
What makes me wondering is that I have to put my MBean Classes to my console extension war file to be able to import the packages in my jsp.
If I not put the classes to my war the compiler throws an exception because he can’t resolve the package.
Because I moved my provider implementation jar to the directory “WLHOME\server\lib\mbeantypes” as described in the bea documentation it should run without putting the classes to the war!?!
I am very surprised that the bea documentation does not provide any example about this topic.Found it. Cut and paste error. I still had one of their example class
names in my code. Oops. -
OS X Panther "Prepares for installation" but nothing happens afterwards.
Hi,
Long story short, I tried updating my computer without checking My computer would actually allow it. Couldn't find my Panther discs so my brother leant me his 10.1 discs and it booted and the installation went fine but now I have the Panther discs i'm having a problem starting up.
It opens in the desktop and tells me to restart my computer, which i do... I hold down C and after a few minutes it shows the loading screen which says it's preparing for installation. Unfortunately that's all it does, the screen goes blue and I am left with the symbol which says it's doing something. I left it for a few hours and came back to find it was still doing the exact same thing as when I left it.
I've also tried starting using the option key and selecting the disc but it goes through the same procedure and doesn't progress.
I know the disc drive works because I checked by playing CDs DVDs (not to mention starting from the 10.1 disc)
It wouldn't be so bad but trying to find all the updates for 10.1.5 is a nuisance and it's strange going backwards from 10.3 to 10.1.
(It's an old grape coloured iMac but it has had memory added and as I stated had previously had panther running)
Help!Leah:
The black ones say Version 10.3
That's great. I will give you step-by-step directions to reformat and erase the HDD, and then install Panther (10.3), then update Panther to 10.3.9. This process will destroy everything on your HDD, so if you don't have an up-do-date backup, post back and let me know. (Question: Do you have an external firewire HDD for backing up?) Otherwise you can just go ahead. It looks difficult because laying it out step-by-step makes it look long and complicated. However, I suggest you first read the procedure through a couple of times, then post back with any questions.
Formatting, Partitioning Zeroing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
Boot from the install CD holding down the "C" key.
Select language
Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select Partition tab in main panel. (You are about to create a single partition volume.)
Select number of partition in pull-down menu above Volume diagram.
(Note: 1 partition is normally better for an internal HDD. External HDDs usually have more than one. See Dr. Smoke’s FAQ Backup and Recovery for tips on partitioning external HDD.)
Type in name in Name field (usually Macintosh HD)
Select Volume Format as Mac OS Extended (Journaled)
Click Partition button at bottom of panel.
Select Erase tab
Optional: (Select the sub-volume under Manufacturer ID (usually Macintosh HD).
Check to be sure your Volume Name and Volume Format are correct.
Select on Security Options button (Tiger) Options button (Panther & earlier).
Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
Click OK.
Click Erase button
Quit Disk Utility.
Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
Check box to install X11 (Tiger) BSD Subsystems (Panther & earlier).
Proceed with installation.
After installation computer will restart for setup.
After setup, reboot computer.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Connect to Internet.
Download and install 10.3.9 Combo Update.
Computer will restart after updates.
Go to Applications > Utilities > Disk Utility.
Select your HDD (manufacturer ID) in left side bar.
Select First Aid in main panel.
Click Repair Disk Permissions.
Good luck.
cornelius -
SEM-BCS Preparation for Consolidation Group Changes
Hi All,
Is the task "Preparation for Consolidation Group Changes" only implemented when Consolidation of Investments has also been implemented?
Does "Preparation for Consolidation Group Changes" have any value on its own?
Any comments, replies or suggestions most welcome.Hi,
I think that prep for cons group changes is independent (but supplementary to) from CoI.
See what is said in help:
"When in the middle of a fiscal year a consolidation unit is either acquired by a consolidation group (acquisition), divested from a consolidation group (divestiture), or <b>changes its accounting technique</b> (method change), the following data must be adjusted:
- Reported financial data
- Standardized financial data
- Consolidated data with posting level 20"
As you can see, not only consolidated data are to be changed, but also Standardized and Reported.
Moreover, as is seen above, changes of accounting technique will also trigger such activities.
So, my answers:
1. No
2. Yes.
Best regards,
Eugene -
Hi :
I want to build a Text Query Application which bases on Oracle interMedia Text. Besides some default languages the interMedia supports (English, French ...), I need index on my own language document. When I refered to the Oracle Text Reference, I saw that I can use the BASIC_LEXER for English and all other supported whitespace delimited languages. My language is Vietnamese which has whitespace delimiter. The question is that can I build my own language dictionary-lexer (similar to some default dictionaries : English, France, German, Chinese ...) to index my document and how can I do that ? In the documents I refered (Oracle Text Application Developer's Guide and Oracle Text Reference) I could'n find direction for doing this.
Thanks.Hi,
In 9.2 there is a new feature: USER_LEXER. The USER_LEXER lets you write and plug in your own lexer to handle
languages or other indexing techniques that Oracle Text does not support. We will be publishing the 9.2 Text technical
overview in a few days that shows you how to do it.
Maybe you are looking for
-
I am trying to put songs onto my brand new iPhone. I have itunes version 10.6.3 and it says that I need 10.7 or earlier in order to sync the IPhone, so I found that download, attempted to download it, but now it says you need Mac OS X 10.6.8 or bett
-
TimeOUT Short dump while accessing WebReport.
A Web Report is taking too much time to open and timing out with a short dump see below details, The Report was working very fine few days back, any ideas please. Information on where terminated The termination occurred in the ABAP program "SAPLR
-
How do I print a list of my channels?
How do I print a complete list of only the channels I can use with my Ultimate HD plan??
-
Transferring photos in iphoto from a G4 to a MacBook Pro
I transferred thousands of photos in iphoto on my old G4 to a new July 2011 Macbook Pro. They all transferred but when I try to enlarge them I get an X, I can only view the photos in the smaller size. Is this fixable, any ideas?
-
Manual update of Forecast/Demand and Stock data in SNC5.1
Can we update the Stock in Hand at customer's place when we receive these values every monday by email? So after getting these figures on every monday we want to update it in SNC5.1 manually. Is it possible? If yes then how? What is the impact? Thx