Moved by Moderator.

Hi I have purchased an online number. I would like to have that number displayed as my caller ID but that number does not seem to be on my 'verified numbers' list and I cannot add it either. Can you help ?

The program a developer writes within development client 1 is only visible to this developer as long as the program is not activated.
[refer this|http://searchsap.techtarget.com/tip/0,289483,sid21_gci1261821,00.html]
Plz search before you make a post.
Regards,
Srinivas

Similar Messages

Moved by Moderator - insufficient information.

i have unlimited skype for $6.99 per month paid for on my credit card

OK that's good. Post back how it goes.
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

If statement is too long in sap scripts.

Hi all,
My requirement is to check vendor and print accordingly, but i am unable to write complete statement in single line. i used page left and right option even though it is not fitting in that line.
please help.
Regards,
Ramprasad
<<Moved by moderator to correct forum>>
Edited by: Matt on Nov 6, 2008 11:48 AM

you can create one loacl varivale and assing your vendor varible to this local varible and check...
Ex : /: lv_lifnr to lifnr.
lv_lifnr = your long variable..
if not lv_varible is initial.
condition
else.
condition
endif.

Values not getting populated in sapscript

Hi,
i have written a subroutine pool with ENTRY form . which is configured in NACE. when i run the T-code VT03N. in debugging mode in the subroutine i am getting the values . But the values are not gettng populated in sap script. open_form , write_form close_form and text elements are all used.
     the same code is copied and put in a report without ENTRY form and run directly then we are getting the values in script.
please let me know for any answers.
Thanks
Chetan
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on May 14, 2009 1:06 PM

H,
    Do as below.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
   form                              = 'ZTEST_SCRIPT'
LANGUAGE                          = SY-LANGU
EXCEPTIONS
   canceled                          = 1
   device                            = 2
   form                              = 3
   OPTIONS                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   OTHERS                            = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Loop at itab .
call function 'WRITE_FORM'
exporting
element = 'LABEL'
FUNCTION = 'SET'
TYPE = 'BODY'
window = 'MAIN'.
ENDLOOP.
Call Function 'CLOSE_FORM'.
In SE71 'ZTEST_SCRIPT' in main window
add a field like &ITAB-MATNR&.
ex:-
/E   LABELS
P1   &ITAB-MATNR&.
Regards
Krishna
Edited by: Bala Krishna on Aug 11, 2008 12:28 PM
Edited by: Bala Krishna on Aug 11, 2008 12:29 PM

How to authenticate userid and password of b2b user in a b2c portal

I am having a reqirement in B2C web portal , where in i have to create two input text fields which will accept userid and password ( the userid and password will be of b2b users)and button to logon and if i click on the logon button, it should take into b2b web portal. Is it possible? if possible please help me in this issue.
Please get back to me if i am not clear in my requirement.
Thanks a lot in advance!
lakshman reddy G.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Oct 6, 2008 6:07 PM

To get an idea check these links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/aaa1a890-0201-0010-eb93-ae3d2bb74a78
BSP/HowTo - Customizing the design of System Logon page in NetWeaver '04
-Aman

Question on ALV report

Moved by moderator to correct forum. Also, please use a meaningful subject in future.
I need to have an ALV report where at least one of three checkboxes need to be diaplayed.
My question is that when one of the checkboxes is selected - it works fine no problem.
How to design it for two or more checkboxes,
I am using I_CALLBACK_TOP_OF_PAGE in FM REUSE_ALV_GRID_DISPLAY, if there are two checkboxes, it should display two reports each with header information et cetera.
Edited by: Matt on Nov 7, 2008 12:04 PM

Hi,
Use the FM
'REUSE_ALV_BLOCK_LIST_DISPLAY'
OR use OO
Custom container with docking container
Regards,
Nandha

.doc File not opening in SAP

Hi,
I am a Network Engineer & i am a noob in SAP.
One of our Customers is implementing SAP in their Enterprise & they are learning it.
Today, there is an error came in the SAP.Some users are not able to open a .doc File from the SAP Window.SAP expert is saying that its a PC Error.We have re formatted the PC & re installed the Microsoft Office in it.Still, the error is coming in 3 PCs.
Due to this, they (Users) are not able to download the reports.
I am attaching a Screen Shot which will give you the exact type of Error it is showing.Please help me step by step if you know the solution.
Thanks in Advance!!
Click on the Link for the Screen Shot:
[SAP Error|http://i357.photobucket.com/albums/oo15/rajeevpayal/SAP_Error.jpg]
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Sep 28, 2011 3:42 PM

Hi,
EXECUTE I18N TRANSACTION CODE--> EXPAND I18N CUSTOMIZING > DOUBLE CLICK ON MS WORD EDITOR--> SELECT BOTH CHECK BOX FOR SCRIP AND SMARTFORMS AND CLICK ON ACTIVE...........
NOW YOUR FILE CAN OPEN IN SAP...
ABOVE MENTION STEPS ONLY WORK IN ECC VERSION...
REGARDS,
KRISHNA

How to print a crystal report in Tally MT691 line printer?

I have recently developed a crystal report with version 8.5 in windows-based operation system (windows xp). My client today told me that the report has to be able to print to a network printer - line printer (Tally MT691); otherwise, the crystal report I developed becomes useless. I have no experiences with line printer. Could you please give me some instructions on how to make it happen?
Any help is greatly appreciated. Thanks again.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on May 7, 2009 11:05 AM

Hi
Unfortunatelly you need to worry about the printer, please don't consider the last replies.
As far I can see this model is a dot matrix printer, only the following models are supported for SAP B1:
For 2005A those are the supported models:
- Citizen PROdot 300
- Epson FX-880
- OKI MICROLINE 320 Elite
- Epson FX-890
For the 2007
- Citizen PROdot 300
- Epson FX-880
- OKI MICROLINE 320 Elite
Please note that some workaround can be found to use different printer but only the mentioned devices are supported. Those workarounds may work in one patch but may stop to work after patch or version upgrade.
Also a multipurpose (combine fax, printer, scanner) devices are also note supported (SAP Note 925841).
Paulo Calado
SAP Business One Forums Team

Print a PO from a HP laserJet printer.

Hello All,
Could you please help me in finding out the solution for below issue.
" We have a requirement to print a PO from a HP laserJet printer. This has to come in Landscape. For that we have copied a device type HPLJ4 and a formato type as Z_LEGAL. We are un sure how to maintain the device type. Like the entried added for Printer Initialization, Reset after Exit, End of page, End of line etc. Who is supposed to maintain the same. Is it ABAP or who?. Is there any note to know how to maintain the format type and can we raise a ticket with SAP to provide the same.
Thanks,
Nikhil
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Oct 7, 2009 2:57 PM

Thanks.

How do I compensate for only one ADDT ' tNG_config.inc.php file with many Registration pages to build?

My dynamic site has a lot of different languages funneled into one website, using various cookies, url params, php includes, etc. all to obtain similar info in different languages. Thank you David Powers.
It is working really well and now I’ve come to the Registration section. Okay, so registration isn’t all that hard; I could do most of it with the standard Dreamweaver set of tools. Alas, I really like much of what ADDT has to offer with welcome email messages and activation and such.
Here’s the setup: Obviously, with many different language people, I have many different databases for them. I did that becuase we’re expecting a big audience and I really don’t want to have all those different language names in the same table. Furthermore, these tables, whereby the students will login, will also contain a lot of information about their work so again, don’t want to have one massive table. I’ve divvied them up into tables by language and I’m using those tables to keep track of them and their work.
I want to use ADDT’s User Registration Wizard and I have looked at all the neat stuff in the Control Panel/Login Settings.
Here’s my situation: I notice that when I’m done with the configuring of one of the registration pages, I’m asked if I want to upload the tNG_config.inc.php page and that it has changed since the last upload. I saved a copy of the _config.inc.php and did a new registration form with the same info and when done, I compared the two _config.inc.php files. As one would guess, there is a small difference in the Connection string to the databases $tNG_login_config["connexction"] = "connString_Ital_db".
My problem is that I have 13 of these registration pages to do but ADDT only has the one tNG_config.inc.php. That’ll work great for the one with which it is associated, but the others will obviously break. I’ve looked through the code in the Registration pages, to find the ADDT link to the tNG_config.inc.php file hoping to rename it Italian, Spanish, etc, but the name of the file does not appear in the Registration page. I realize that ADDT Control panel is designed for use on one site, and can then be used on others, with the changes etc. But my site seems a little unique since so many sites are actually in one.
Has anyone whipped this problem before? I just don’t understand why there is no link in the head code of the Registration page to let me change it and to create more config files with different names. Thanks for you help!
[Moved by moderator to appropriate forum]

Hi Brian,
I just tried to check all of ADDT´s "includes" files for any internal references (read: "require" or "require_once" statements) to the file "tNG_config.inc.php". So far I can only see this file referenced in the file "tNG.inc.php" (within the "$KT_tNG_uploadFileList1" array).
So what could this mean ? Maybe you´ll have to make copies of the the original "tNG.inc.php" as well and save them as, say, "tNG.inc_ital.php" file plus make sure that these copies internally point to a different "tNG_config_ital.inc.php" file -- because it´s always the first mentioned file which gets referenced from e.g. an ADDT login page (see the "Load the tNG classes" - part)
I want to use ADDT’s User Registration Wizard and I have looked at all the neat stuff in the Control Panel/Login Settings
The Control Panel will always update the main "tNG_config.inc.php" file, so any further modifications will have to become manually applied to the custom files you´re creating.
Cheers,
Günter

How to Print a Character in Reverse video ...?

Hi Could any one of you help me " How to print a character in Reverse Video " in SMART Forms and in SAP Scripts.
Regards,
Saravanan
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Mar 26, 2009 5:31 PM

deepak_c3 wrote:
Thanks for the info.,
where should the page number n-1-i be returned ?
Which method implementation of Pageable interface should return the page number ?w.r.t. your first question: don't return that number but return page n-1-i when page i is requested; your document will be printed in reverse order. Your class should implement the entire interface and wrap the original Pageable. (for that number n your class can consult the wrapped interface; read the API for the Pageable interface).
kind regards,
Jos

How to prevent a text in script from displaying if its value is zero

Dear all,
How to prevent a text in script from displaying if its value is zero
for eg   Price = 0.00
if price is 0 it should'nt appear in output.
I tried with    if price ne 0.
                   price = &price&
                    endif.
but it's not working.
Regards
Raj
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 20, 2009 8:59 AM

Hello Nagaraju,
                       What you were doing is partially right.
The correct format to write in the script is as follows :
/: if &PRICE& ne 0.
&PRICE&
/: endif.
This should work. Let me know how it goes.
Nayan

How to give constant space in sap scripts.

Dear experts,
In my requirement I am printing invoice line item details. In my program,I am printing 8 columns. How to give the constant space in my output.
My issue.: here am fetching Internal Excise Document Number (DOCNO) item number (zeile) plant (werks) quantity (menge) storage location (lgort) and so on.
when i am fetching the values from the table, the values are different from each and every rows. so nothing would be aligned properly into the column. For example, if the doc no is having 10 char,from item no all the values of the column is getting moved to right side. in my second row doc no is having only 2 chars. in this case every column value is moving left side. its looking like realigned and not good.
How do i give constant space for each and every column. so if the values are more or less it could not be moved to any side.
please hellp me to solve this issue.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Thanks in advance.
Regards,
Sandy.
Edited by: Alvaro Tejada Galindo on Sep 28, 2011 3:40 PM

Hi,
check out ur tab positioning in paragraph format...any misalignment is their or not.
second thing you can do is checkout your printer i.e zebra printer or .matrix etc. your using sometimes misalignment happens
in printer..or print some sample values for verifying the root cause .
regards,
KRISHNA

How to print dynamic images in smartforms?

Hi Guys,
We are maintaining images in QM02 similar to the header or item texts. Those images has to be displayed in smartform.
Can anyone know how to read any image from transaction and display the same in smartform. Those images will be different for different notification numbers?
Please let me know if instead of SE78 we can read the image and display the same in smartform?
Or is there anyway we can achieve the same?
Thanks,
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Dec 28, 2009 2:30 PM

Hi Naidu,
I Have the same problem with you. I Did a program to put all imagens in SE78. After this, you can use a variable to fill out the name.
Example:
Name: &name&
Object:GRAPHICS
ID:BMAP
Regards,
Marcelo

Smart form for Goods issue

I am facing a problem with smartform. I am creating a smartform for good issue
This is the smartform Z_SMB40_MMGI1_L and this is the print program Z_SMB40_M07DR
For ME application i have assigned the output type wlb1 and the above said form in nace.
I am picking the document number from mb51 based on the movement type 309
in mb02 for each document i am trying to assigning the output type wlb1
i was able to assign the output type for only one document number for rest it is showing warnings and also for few documents i am receiving error
Express document "Update was terminated" received from author "xxxxx"
how do i assign for all documents at a stretch (in which t code).
in mb90 i am trying to view the form but it is throwing the error
START_FORM is invalid, OPEN_FORM is missing,
even though i have removed the script name.
can u please help me out by providing the corresponding print program and smartform for above said scenario
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:47 PM

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

Moved by Moderator.

Similar Messages

Maybe you are looking for