MOVED: Can a bad CPU destroy a good motherboard??

This topic has been moved to Off-Topic Technical.
https://forum-en.msi.com/index.php?topic=108152.0

Well here's a new one, but I might be speaking too soon. I certainly hope not!
The AirPort checked out just fine at the Apple Store, and sure enough within an hour back home my connection/browsers crashed. I shut down the computer and unplugged the gateway. It ran smooth for three whole hours before crashing this time (the longest time on record).
There's been one more thing in the back of my mind, and before calling the DSL company to return the gateway I figured I'd give it a try.
I unplugged the KENSINGTON wireless optical desktop for Mac, keyboard and mouse with the RF receiver, and guess what?
I haven't crashed in " 10 entire hours"!!!!!!!!!!!!!!!! BIG RECORD!
Who would know? Not I.
I emailed Kensington Support and asked whether the RF reciever might interfer with a wireless connection via airport, but I don't expect a reply. Niether a reply from the Yahoo!SBC/DSL support, because nothing, i.e. no video works with Mac OSX on their homepage. Bummer! But that's another problem I CAN ignor.
Has anyone here ever heard that a wireless keyboard and mouse can mess around your airport connection?
So for so good.
G5 dual 1.8   Mac OS X (10.3.9)  

Similar Messages

  • MOVED: Can't change cpu multiplier

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=128839.0

    Quote
    I can't change the CPU multiplier in my bios.
    Quote
    I can change it to 6.
    If you can change the multiplier to x6, why do you say that you can't change it?  Everything is okay then.  I don't see what your problem is.

  • On what parameters based an aggragate can be decided whether it is good agg

    Hi,
    On what parameters based an aggragate can be decided whether it is good aggr or bad aggr.
    Regards,
    Siva Thottemopudi

    when i execute the report after 300 seconds it gets terminated due to session timedout.
    my report is based on currency type 10 , fiscal year 007.2010 and comapany code
    I have created an aggregate based on the above parameters and when  i chek in RSRT report is hitting the same aggregate.
    But in maintain aggregate of cube in valuation tab i can see negetive signs ( does it indicates bad aggregte??)
    for small company code report executes in a  short time but not for big company code even though suitable aggregates are available.
    what might tbe the reason.
    Edited by: Siv Kishore on Aug 4, 2010 2:35 PM

  • HP5L prints 2 bad pages before a good one

    I have an old HP5L black and white laserjet printer purchased in ~1997 (maybe I should not be cheap and upgrade!). It has developed an issue printing on the first couple sheets.
    It is a HP Laserjet 5L Xtra, Model C3941A.
    It will no longer print a self-diagnostic sheet. After holding the button, the middle light will light once, then the yellow light will light once, and then the bottom light illuminates again, and nothing happens. I pulled the printer cable and removed the memory card and tried again (after cycling the power) and no change.
    If I send a file to the printer from any application (I'm in Windows 7), it sends out two pages that look similar to what is attached (there's almost a jagged looking attempt at the first line at the top of the sheet), and then will print the file perfect on the third sheet. And by that, it prints all three sheets (the two bad and then the good one) from one print command. It does not need to be resent. Just eats up paper.
    If something else is sent in quick succession, it will also print out fine. It's almost like the printer has to warm up and then it's ok. 
    I happened to decide it was time to reformat and reload everything from setup files on my computer a couple weeks ago thinking maybe a side benefit would be this problem would go away as something might have gotten corrupt after many years and was sending junk tothe printer. Nope.
    The printer is currently connected through a USB to parallel port adapting cable, but did the same thing when using the parallel port.
    Any ideas on what to try? The printer still makes good prints after the first two sheets come out, but it is really annoying.
    Thanks!
    Chris

    Hi George,
    At this stage you have your table across 4 pages. You have not said if you are using portrait or landscape for printing but it doesn't matter.
    When you click on a table it is selected and the ABC and 123 Column and row titles appear, when the table is not selected they disappear. As you seem to have only one table it's going to appear as selected all the time.
    When the table is selected there are tags on the top right, bottom left and bottom right of the table which you can drag backward and forwards to make more or less rows and columns the tag bottom right does both rows and columns at once. You can also select by clicking on the ABC / 123 titles and use > Edit > Delete.
    It sounds far more complicated than it is, remember the tables are graphics not an excel type grid.
    The Inspector and tool bar have all the tools you require although some are repeated on the format bar.
    Numbers is best used for multiple tables on multiple sheets not single monolithic grids.
    The help option is great too.

  • Error:arch: posix_spawnp: osascript: Bad CPU type in executable

    Hi, i am new to these issues
    I use to be able to excute my frank-cucmber on Lion and now when i move to mountain lion and I  get the following error
    error:arch: posix_spawnp: osascript: Bad CPU type in executable
    i read on the interent that mountain lion is not supporting 32 bit
    so how can  i solve the problem so 32 bit will be supported?

    You need a 64-bit version.
    32-bit will never be supported on Mountain Lion.

  • Need a Badi to look the good issue status for prod order before good receipt in MIGO

    Hi ,
    Need a Badi to look the good issue status for compoents for prod order before good receipt in MIGO.
    Example : There are 10 comps need to be issued to production order to make any assy but 6 comps were issued
    and remaining 4 comps are not yet issued.,in this situation if I try to do goods receipt for prod order through MIGO.,system should populate the warning
    message saying still goods issue are pending for prod order.
    Please advise .
    Thanks
    Prasad

    Hi Prasad,
    Before trying with a BAdI, have you tried to control this behaviour thru the Order confirmation parameters (OPK4)?
    Note that you can have a termination in case of having problems in the goods movements..
    Take a look of this and the SAP help:
    Termination of Confirmation if Incorrect Goods Movements
    Controls if the confirmation is terminated in the event of incorrect goods
    movements.
    Use
    This enables you to terminate the confirmation in the event of incorrect
    items, for example, to prevent postprocessing records.
    Dependencies
    The indicator is only evaluated if either no process control key or one
    process control key has been stored that enbles the goods movements to be posted
    in dialog AND for which the "provide error handling for goods movements"
    indicator is active. If there are incorrect goods movements, the system behaves
    as follows:
    A log is issued that gives information on the incorrect goods movements
    If these incorrect goods movements are determined by inventory management,
    then the option of correcting these errors is offered in the error handling
    If the correction is not successful, the confirmation is terminated
    Kind Regards,
    Mariano

  • My TX2 suffers from the bad cpu socket syndrome Lawsuit?.

    My TXT does the bad cpu light flash at start up. If I do the "bake" the motherboard thing to reflow the cpu socket, or remove the keyboard and use a heat gun to heat the socket solder, it will work fine. It will last about a week, longer if I don't allow it to shut off. The thermal cycling of the cpu socket is a problem and most if not all the TX2s suffer from this. It was blamed on an overheating gpu byt that is not the problem in most cases. What can be done to get HP to rectify the design/build problem.
    Stew

    Clear CMOS Guide (remove power cord before proceed) and insert memory stick in DIMM slot close to CPU socket.(ensure its filled well too)
    if no go try with different memory stick.

  • Bad CPU cause stop errors?

    Does anyone know that a bad cpu cause stop errors in win2k ect.. or what would cause such errors?  Bad memory?/

    Hi,
    It can be anything:
    Bad CPU
    Bad mounted CPU-cooler
    Light powersupply
    IDE cables wrong used
    Harddisk broken
    Mobo damaged
    Metal standoff's left between the case and the board
    Bad drivers
    Broken videocard
    Bad memory banks
    Bad BIOS settings
    There are probably a few more, but that's about what it can cause it.....
    Start reading the trouble guide.... :D

  • K8T NEO FSR bad bios or bad CPU?

    Hi - I just got a K8T NEO-FSR with an Athlon 64 3000 (newcastle) and 512 Meg of Corsair value select memory.  I installed everything fine and tried to install a fresh copy of windows xp home but I kept getting a blue screen of death and a registry error (from the CD!!).
    I then reformatted my drive and put a copy of windows 2000 pro on it.  After updating the drivers, everything seemed to be OK.  But - I was getting a few random problems (CD stopped working, freeze, etc).  I was going to try to install XP but I thought I should probably upgrade the BIOS first just to make sure that wasn't the problem.
    Well - I followed the instructions for updating the BIOS (I've done it before for other systems) and everything seemed to go smoothly until I tried to reboot.  Nothing - it powers up but doesn't do anything.  I assumed that something must be wrong with the BIOS.  I double checked which file I was using A6702VMS.180.
    I then tried a BIOS recovery.  I reformatted a floppy on a windows XP machine and put a copy of the BIOS that I had backed up before the flash onto the disk named AMIBIOS.ROM.  Then I unplugged the power supply and every piece of hardware except the CPU, reset the CMOS, and let it sit for 15 minutes.  Then I reconnected the floppy and plugged in a PS2 keyboard into the back.  Pushed down CTRL and HOME and turned the power on.  Nothing.  Tried it again with each CTRL key and with the regular HOME key and the keypad.  Nothing.
    The LED's on the back panel show all 4 red which the manual says is a bad CPU.  Could my CPU have died somehow?  Did I miss something obvious?
    My power supply is an Enermax 350W with 32A on 3.3V, 32A on 5V, and 17A on 12V.
    Any thoughts?  I'm a little annoyed that I can't find a definitive source for how many amps on each of the rails the main board and CPU need.  I've found widely varying advice on all of the boards I've read.
    Thanks,
    Ted

    Quote
    1) The PSU that you have is quite weak on the +12v Rail & could be the cause of your problems, most people on here recommend 20a on the +12v Rail.
    I've seen people on various boards throw numbers anywhere from 15A to 30A for the 12V rail.  However, I haven't seen anyone quote any hard sources.  My back of the envelope computations:
    CPU: 89 W (max power from AMD's web site)
    MEM: uses 3.3V
    Floppy: uses 5V
    CD: 20W
    RAM: uses 3.3V
    HD: 15W
    Geforce2 GTS graphics card: 8W
    which gives me about 132W on the 12V rail at maximum power usage (which - since I haven't done anything I doubt I've hit).  This would be about 11 amps which is easily covered by my power supply.  And - the 89W number form AMD is for all the Athlon64 chips of which the 3000 is the very low end so it's probably less than that.
    Quote
    2) You may have faulty RAM & i would recommend running a memory testing program just to check that is ok.
    Could the RAM be faulty even though I had a windows 2000 setup running reasonably well?  The BIOS did do a memory check on each startup (I turned that on when I first installed the board).
    Quote
    As for the system not booting now, sounds like you have a bad BIOS flash & that you will need to get the BIOS reflashed or RMA your motherboard.
    I don't think this board supports reflashing - the chip is soldered onto the board.  Any idea why the rescue procedure isn't working?

  • Can anyone direct me to a good overview of the new features of iOS 6 (I use an iPhone 4S) so I know what I've got and how to use it?  Thanks!

    Can anyone direct me to a good overview of the new features of iOS 6 (I use an iPhone 4S) so I know what I've got and how to use it?  Thanks!

    http://www.apple.com/ios/

  • "Bad CPU Type In Executable"

    After upgrading from an eMac to an Intel Mac Mini, I noticed that I needed to reinstall Xcode. Once I reinstalled Xcode (v2.4), I made some changes to one of my applications. After testing it fully on my new Mac, I copied the .app file to my old eMac and attempted to re-run. In doing so, I received the following error message:
    "You cannot open the application 'NAME OF APPLICATION' because it may be damaged or incomplete."
    So, in Terminal, I navigated through the Package Contents to the actual executable and tried to run it. I, then, received the following error:
    "Bad CPU type in executable."
    How do I correct this error, so it will run on both of my Macs??
    THANKS IN ADVANCE!!
    WBELL
    eMac Specs:
    1GHz, 768MB DDR, OSX 10.4.x
    Mini Specs:
    1.5GHz Core Solo, 1024MB DDR2, OSX 10.4.x
    Mac Mini Mac OS X (10.4.7) 1.5GHz Core Solo

    Here are a couple of things to check...
    First, from your screen shot it appears that the main.m file is from an older AS Studio application (ie is this a project that was originally created some time ago... perhaps under Project Builder?). The main.m file that gets included with relatively new AS Stdio apps looks like this:
    <pre>
    extern void ASKInitialize();
    extern int NSApplicationMain(int argc, const char *argv[]);
    int main(int argc, const char *argv[])
    ASKInitialize();
    return NSApplicationMain(argc, argv);
    </pre>
    So you may want to copy/paste the main.m code from a newly created AS Studio app into your (older?) existing project. I'm not sure the above problem would cause the failure to build a Universal app, but changing code in main.m may get rid of the warnings you're seeing.
    But also, the screenshot made me wonder if your target(s) needs to be converted to the newer "native" target format (this is different from the "conversion" that Xcode does to an older project file). With your project open click on Xcode's "Project" menu... is the option "Upgrade 'YourTargetName' to Native Target" or "Upgrade all Targets in Project to Native" available? If so, I think you must convert to native targets in order to build universal binaries.
    Hope this helps,
    Steve

  • Can the badi of MIRO be used to add/delete the material documents in MIRO?

    Hi ,
    Can the BADI of MIRO be used to add/delete the material documents in MIRO? As I use call transaction to call 'MIRO' , during I fill in the bdc tab of the MIRO, I want to use its badi to delete/add some listed material documents in the items of the MIRO.
    If you have solution, please let me know. Thank you very much.

    Thank you for your reply.
    Yes, I have finished the call bapi code. But the users want to change some post date, tax, amount and some account values
    during MIRO. So I tried to use call bdc.
    But when I call bdc to run miro, I need to update the material documents reciords which are choosed according to some specific logic.

  • Can a BAdI (RSR_OLAP_BADI) be implemented in BI 7.0?

    Hi,
    I have seen some examples of implementing BAdI in BW 3.5 for creating virtual key figures in InfoCube, ODS etc.
    Can a BAdI (RSR_OLAP_BADI) be implemented for virtual key figures in BI 7.0 also (InfoCube & ODS)?
    Thank you,
    Sekhar

    no, i think  we cannot impliment for that particular RSR_OLAP_BADI badi because of this version change

  • Can you convert this file into good searchable pdf file: Medical Terminology- A Short Course.azw4

    Can you convert this file into good searchable pdf file: Medical Terminology- A Short Course.azw4

    I don't think that Adobe offers any software to convert .azw4 files.  Search Google for alternate converters.

  • Can you please let me know good institute to learn SAP GTS Module , Now I am working SAP MM module .

    Can you please let me know good institute to learn SAP GTS Module , Now I am working SAP MM module and I would like to learn SAP GTS module .
    And also request you share me any documents you have with you ..
    Srikrishna

    Hi Krishna,
    please find the below URL
    http://help.sap.com/saphelp_gts70/helpdata/en/1d/8082ab7248f74ca09861d9713b9a52/content.htm
    Balaji

Maybe you are looking for