MOVED: Can't go higher than 225 fsb

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=110234.0

Quote from: BOSSKILLER on 07-August-07, 08:28:28
nice
Yep. Thanks BK.
Seem to be getting good results so far. I dropped the cpu multi to see how high the htt would go and was able to pass 300 htt quite easily, whether or not this makes things run faster I don't know. HT is at 3x, ram running 7% over spec.

Similar Messages

P45 Platinum Owers. Can you go higher than 450MHz FSB with v1.5 or v1.6 BIOS?

I like to know who can overclock FSB to higher than 450MHz if you are with v1.5 or v1.6 BIOS.
I could do over 500MHz FSB with v1.4. Unfortunaetly, it has vCore bug, so I couldn't adjust core voltage.
according to my personal experience, there was overclocking wall around 425MHz with v1.5 and v1.6.
I, actually, was expecting v1.6. But that problem was still there.
I guess MSI blocked overclocking feature on purpose due to reduce damage of there board.
That's why they have perfomance BIOS on there beta BIOS site.
I like to know anyone have same problem as me or all this thing happened to me only.

Quote from: Kingnemesis on 13-March-09, 00:24:29
Well I have this Problem too, I can't get the System Stable above FSB400 with the Q9550 on Bios 1.5 or 1.6.
With the E8400 it was possible to get the FSB to 450 by Jumper OC but this doesn't help with the Q9550.
Code: [Select]
MSI has a solution about the problem, will post here once i have it too.
Do they have a new Beta Bios to get higher FSB ?
In fact some people on the German MSI Forum asked MSI for help but didn't get an heplfull answer.
Quote
Do they have a new Beta Bios to get higher FSB ?
Yes, can reach 500FSB {maybe more}
Will have it tomorrow probably and will upload it.

Resolution can't go higher than 1280x1024 - native is 1920x1080

This seems to only be a problem in Snow Leopard, as it works fine as a display for a Windows PC. I try to attach my Samsung SyncMaster to my mac and the maximum resolution it says it accepts is 1280x1024@60 or 70Hz. Its native resolution is 1920x1080@60HZ. I've tried SwitchResX, and when I try to install this resolution it comes back with "Not activated - Invalid?"
Is there a way by editing a file I can change or force the resolution in terminal or a file to edit the external display's resolution (iMac 2009 Snow Leopard) I've got 10.6.2 ... any help is appreciated!
Thanks in advanced!
This is only the mini displayport to dvi adapter

This is what the file says:
What should I do with it? Edit what and save it where to take effect?
{quote:title=Syncmaster File Contains:}
DDC block report generated by SwitchResX version 4.1.1 for display
SyncMaster
------------------- RAW DATA ------------------------
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 4C 2D 61 01 00 00 00 00
1 | 14 0E 01 03 80 22 1B 78 2A EE 91 A3 54 4C 99 26
2 | 0F 50 54 BF EF 00 81 80 01 01 01 01 01 01 01 01
3 | 01 01 01 01 01 01 64 19 00 40 41 00 26 30 18 88
4 | 36 00 52 0E 11 00 00 18 30 2A 00 98 51 00 2A 40
5 | 30 70 13 00 52 0E 11 00 00 1E 00 00 00 FD 00 38
6 | 4B 1E 51 0E 00 0A 20 20 20 20 20 20 00 00 00 FC
7 | 00 53 79 6E 63 4D 61 73 74 65 72 0A 20 20 00 FD
< 00FFFFFF FFFFFF00 4C2D6101 00000000 140E0103 80221B78 2AEE91A3 544C9926 0F5054BF EF008180 01010101 01010101 01010101 01016419 00404100 26301888 3600520E 11000018 302A0098 51002A40 30701300 520E1100 001E0000 00FD0038 4B1E510E 000A2020 20202020 000000FC 0053796E 634D6173 7465720A 202000FD >
Valid EDID block: checksum passed
------------------- MAIN EDID BLOCK -----------------
EDID Version........1.3
Manufacturer........SAM
Product Code........24833 (6101) (0161)
Serial Number.......00000000
Manufactured........Week 20 of year 2004
Max H Size..........34 cm
Max V Size..........27 cm
Gamma...............2.20
Display Supported Features:
Power Management: Active off
Display type:
RGB 4:4:4 & YCrCb 4:4:4 Color Encoding Formats
Display is non continuous frequency
Default color space is not sRGB standard
Preferred timing mode includes Native Pixel Format
Input signal & sync:
Digital Input
Color Bit Depth is undefined
Digital Interface is not defined
Color info:
Red x = 0.640 Green x = 0.300 Blue x = 0.150 White x = 0.312
Red y = 0.330 Green y = 0.600 Blue y = 0.060 White y = 0.329
Established Timings:
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 67Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 56Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
832 x 624 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
1280 x 1024 @ 75Hz
Manufacturer Reserved Timings:
Standard Timing Identification:
#0: 1280 x 1024 @ 60Hz (8180)
Monitor Description blocks:
Descriptor #0 - Timing definition:
Mode = 1024 x 768 @ 60.004Hz
Pixel Clock............. 65.00 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1024 pixels 768 lines
Front Porch............. 24 pixels 3 lines
Sync Width.............. 136 pixels 6 lines
Back Porch.............. 160 pixels 29 lines
Blanking................ 320 pixels 38 lines
Total................... 1344 pixels 806 lines
Scan Rate............... 48.363 kHz 60.004 Hz
Image Size.............. 338 mm 270 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Negative vertical polarity
* Negative horizontal polarity
Descriptor #1 - Timing definition:
Mode = 1280 x 1024 @ 60.020Hz
Pixel Clock............. 108.00 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1280 pixels 1024 lines
Front Porch............. 48 pixels 1 lines
Sync Width.............. 112 pixels 3 lines
Back Porch.............. 248 pixels 38 lines
Blanking................ 408 pixels 42 lines
Total................... 1688 pixels 1066 lines
Scan Rate............... 63.981 kHz 60.020 Hz
Image Size.............. 338 mm 270 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Positive vertical polarity
* Positive horizontal polarity
Descriptor #2 - Monitor limits:
Horizontal frequency range.......30-81 kHz
Vertical frequency range.........56-75 Hz
Maximum bandwidth unspecified
Descriptor #3 - Monitor name:
SyncMaster
{quote}

How can i make the end of a text higher than the rest in 3D?

I'm designing a 3D text for the outlet store of www.badkamermarkt.nl/ and would like to know how I can make the end of the text higher than the rest in 3D.

Hi,
Can you attach a comp of what you're trying to accomplish, instead of a live link to a commercial home page?
Are you wanting to make the country code of the url bigger like this?
regards,
steve

Why can't I get an update higher than OS X 10.6.8?

I am new to this whole thing but... Why won't my computer update past/higher than 10.6.8 (I ran the software update and it said I'm up to date)? I need at least 10.7 for an application I'd like to download...

Which model MacBook Pro do you have? 10.6.8 is the last version of Snow Leopard - you would have to purchase Lion or Mountain Lion but, if your machine will support Mavericks (http://support.apple.com/kb/HT5842), you can update to that free.
Purchasing Lion or Mountain Lion requires a call to Apple - you can't buy it directly from the Mac App Store.
Clinton

Scxi 1112 can not acquire correct data at high temperature(higher than 700C)

A scxi-1112 module in scxi-1001 chassis is used to acquire oven Temperature. Software is LabView 8.5. when oven is ramping higher than 700C, the module gets wrong data, the data acquisition VI shows random values around 700C.It seems the scxi-1112 module "reaches" its maximum setting, which actually is 1000C. Can Anybody explain what's happening to me? Thanks.

Hi gq,
Could you please provide a screenshot of the
way you are configuring the task, as well as what the data looks like
that you are seeing when it behaves incorrectly? If you just perform a
voltage reading (instead of a temperature task), what values are
returned, and does it show the same behavior of reaching a certain
voltage and not ramping any higher? Also, how do you have your
thermocouple attached to your oven; is there any possibility that the
connection is conducting at that temperature? Also, regarding the use of different measurements in the task, are you using different modules in your system or are the measurements being done on the same 1112 module? Additionally, have you tried other channels and received the same problem? I look forward to reading your response.
Regards,
Daniel S.
National Instruments

Can i update any higher than 10.4.11

can i update my powerbook g4 any higher than 10.4.11

*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

HT4623 How can I update my original iPad to an iOS higher than 5.1.1? It says my software is up to date, but how can it be if it is still iOS 5?

How can I update my iPad to an operating system higher than 5.1.1? It says software is up to date, but I'd like it to be iOS 7, or at least 6!

The original iPad is incapable of running iOS 6 and newer. Therefore, it's up to date with 5.1.1.
(100683)

HT4623 Why can I not update my iOS 5.1.1 to anything higher. Apps I had that worked, no longer work because they require higher than 5.1.1

I have an iPad with ISP 5.1.1 which I can not seem to update to anything higher than 5.1.1.... The apps that we're working on 5.1.1 but are upgraded to ISP 6 and/or 7 will no longer work. When I try to open them I get a message saying App expired. Wth??? Help plz... ( first apple product)....

I Don't understand why the apps would expire. Apps that work in iOS 5 should still work on your iPad. Did you try updating these apps and it was unsuccessful?
And and I've never heard of apps expiring.

How do I update my cinema 4D lite to one higher than 11.5? Can I?

I have cinema 4d lite 11.5 that came bundled with the AE installer, but have since updated AE and cinema 4d has not. When I try and open the C4D file in AE it says I need higher than 11.5 c4d lite. Any idea?

Andrew Sones wrote:
I've tried updating AE, but it just updates AE and does not update cinema 4d. Does that make sense?
No.
Look at some tutorials for using AE with Cineware. http://greyscalegorilla.com/cineware

MOVED: Can't overclock e8400 on an MSI P7N 780i mobo

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=115136.0

Pchas,
If by what you mean is being able to run RAM at a 1:1 divider with your FSB, then you are absolutely correct. When overclocking, this is well known to be the most desirable means in which to run your RAM, as slower RAM can bottleneck performance, while faster RAM won't result in any realized, every-day-use performance benefit (with a Core 2 system.) Therefore, a 500mhz FSB (2000mhz rated, quad pumped) would pair best with RAM running at 500mhz (1000mhz DDR2, hence, double data rate.) However, whether or not the memory is SLI enabled has nothing to do with how fast your RAM can run.
I'm not sure I see the value in finding max FSB by reducing the processor multiplier to its lowest value. It doesn't reflect any real world usage scenario, and it greatly reduces the amount of stress placed on the FSB, such that you'll be able to bench quite a bit higher than what can be obtained when tuning for an overall overclock. As such, it really doesn't tell you anything useful about the boards capabilities. M goal is to see whether or not the board will support a stable 400-450fsb with my Quad running at a full x9 multiplier, hence resulting in a 3.6-4.05ghz quad. I know that the reference boards have no problem doing this, and I'm hoping the MSI will pull through, if not with the latest BIOS, then with one coming down the road. Being able to support my overclock while providing a superior power-phase & delivery system would make this the hands down, unqualified best high-end nForce board (680i or 780i) yet released.
Mark.

I am looking at the TB dashboard having just opened TB. On the left I see folders. The "sent" folder, lets say, is higher than the "outbox" folder. I want to

I am looking at the TB dashboard having just opened TB. On the left I see folders. The "sent" folder, lets say, is higher than the "outbox" folder. I want to put the "outbox" folder above the "sent" folder. How so I make that happen?

I know the addon will allow you to reorder the accounts, so you could put 'Local Folders' above another mail account.
It will also allow you to resort the folders within an account.
So if you have a Pop mail account that uses the 'Global Inbox' setup, then it should allow you to move the Outbox position within that special account.
But as the 'Outbox' is a 'Local Folder' folder, I'm not certain that you can move it out of 'Local Folders' and reposition into another account.
The method of moving folders is done via the Menu Bar.
'Tools' > 'Manually Sort Folders'
Select the folder and use the 'Move up' or 'Move down' buttons.
Then click on the 'Refresh folderpane' button to display the new sort order.

[915 Series] sata II and DDR2 higher than pc4200...2 questions.

Can i put sata2 on my MSI 915 G COMBO ?
What's the differenc betwin pc4200 (533) and pc4300 (533)? Looks like the 4300 is a ddr 538!???
If i try a memory higher than PC4200(533) on the same MB(915g) it will reconize it as a 533 or 400?
cheers

Quote
Can i put sata2 on my MSI 915 G COMBO ?
SATA2 is supposed to be backwards compatible.
Quote
What's the differenc betwin pc4200 (533) and pc4300 (533)
A typo?
Quote
If i try a memory higher than PC4200(533) on the same MB(915g) it will reconize it as a 533 or 400?
It might run it at 533, but as the natural FSB for that board is 800, the probable (and desired) result is it will run at 400, leaving lot's of room for overclocking at a 1:1 ratio.

MOVED: Can't overclock MSI 660 TI power edition

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=167176.0

Quote from: hurricane28
I know that no card is the same that's not the issue and like i said this card is a great card.
But can you tell me than why is it that when i looked at reviews they get 150+ on the clock and mem +600 when people who bought this card only manage to get in between +20 to +50? they did not use the aux voltage.
Quote from: flobelix on 10-March-13, 21:40:22
Overclocking is a matter of the individual sample. Some cards of the same model might clock great while others won't.
Quote from: hurricane28
I heard that the first cards would be able to put more volts but the later cards having volt locks because its high potential?
If so could i get the older bios versions of that card or get another bios on my card?
It just don't seen fair that the first cards could overclock way better than the latest cards.
and it is not that some cards are better ans some are not because this is my second card i get because i was thinking it was broken because of my problems.
Nvidia forced all card manufactures including MSI to remove GPU overvoltage above 1.175v. It has nothing to do with potential but Nvidia dictating to stop overvoltage. MSI is therefor not allowed to offer unlocked versions. Again overclocking is a matter of the individual sample and your 660ti PE is already higher clocked by default than most other manufacturer cards could do with manual oc.

When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?

When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
I've tried rebuilding the thumbnail database, but that hasn't helped.

What version of iPhoto and system are you running?
Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left. Does that let more than one photo display in the window?
OT

MOVED: Can't go higher than 225 fsb

Similar Messages

Maybe you are looking for