MOVED: cannot overclock H55M ED55 with i3 540

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=146235.0

henry,my CM psu is fine, its been running a heavly overclocked [email protected] on a abit IP35 with 4gb of A-Data 1066+ running at 2.35v@1200mhz for 3 years,so i doubt a i3 540 and 4gb of ddr3 is going to really cause it that much of an issue but just to be on the safe side i borrowed a thermaltake toughpower 750 psu and still ran in to exactly the same issues. Also on your advice i borrowed 4gb of crucial ballistix tracers and again same problems i've been having? However on the advice of another H55M ED55 user ive downgraded the bios to 1.3 and used the o.c genie button it'll run at 3.7ghz but i cannot get it to run at that manually? i feel that the board may have a faulty/damaged ram socket because out the 12gb ive tested none will run without bluescreens when socket 1 and 2 are filled but when i only put 2gb of ANY make of ram in socket 1, it will overclock automatically with the BLUE button as i call it(i normaly would never ever use anything like the o.c genie but i'm so tired and p$%ed off with the whole thing!)
if that reply sounds arsey, it really isnt meant to be but nearly 3 weeks 6 forums 200+ views no answers kinda gets to you after a while? and i appreciate everything you've suggested and help you've offered, i'm open to anything else if you have any,no matter how daft the suggestion!
andy

Similar Messages

MOVED: cannot overclock my card any more...

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=120331.0

I use the same driver from Nvidia. It oc´s without proroblems. I use the EVGA Precision. Works realy good. For normal OC!

MOVED: Athlon 3000 + K8N Neo Runs Fine but cannot overclock......

This topic has been moved to Overclockers & Modding Corner.
Athlon 3000 + K8N Neo Runs Fine but cannot overclock......

Hi Turfman, go to the end of this mile long thread:
https://forum-en.msi.com/index.php?topic=80211.120
Or take this shortcut:
http://www.madshrimps.be/?action=gethowto&number=5&howtopage=145&howtoID=58
Let us know what you got...if this becomes more of an OC thread, it may get moved...

Excel 2013 - Cannot complete this task with available resources

We were getting this error message when we first updated to Excel 2010. A user would select all of the cells in a workbook, try to do something with them (sort, copy/paste, etc), and Excel would crash or give the above error message about available resources.
I quickly found and applied a hotfix that addressed the issue, and that was that.
Now we're having the same issue in Excel 2013 (specifically, Office 365 ProPlus click-to-run installation). Only this time, there are not hotfixes available (because it is click-to-run?) and I'm not sure where to go from here. I have a user who is selecting
all of the cells in a workbook choosing the option to "Merge and Center", and Excel either freezes at that point or gives the above error message. This is a task he has done daily with these particular workbooks for the last several years without
issue, that is until moving to Excel 2013.
Excel was crashing on him regularly after updating to 2013 version, so I replaced his machine with a brand new one and brand new Office installation. He has plenty of memory (machine has 6GB of RAM) and the workbook is not particularly large (a few hundred
rows and few dozen columns). I do notice that when the error occurs, the memory in use by excel immediately balloons from 80MB to 1.5GB. However the machine is still using less than 50% of its available 6GB at that point.
I've disabled all add-ins, made sure we're on the latest Excel build (15.0.4517.1005). Not sure what else I can do. Any thoughts?
Shaun

Hi,
Does it happen with a particular file or with all the files?
Is this a shared file? If yes, have you set any password?
Create a new file and check if it works. If it helps, then copy the contents of the file to a new file and check if it helps.
Also, here's a similar case for you to refer:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-cannot-complete-this-task-with-available/4861a69a-6ce0-4c74-ad45-9012d5edf9f1?msgId=95b69652-0902-4564-9884-952e0ba54e15
Jaynet Zhang
TechNet Community Support

Excel not even open - "cannot complete this task with available resources" and then VBA run-time error randomly appear!

Has anyone else seen the "Excel cannot complete this task with available resources" error message appear when Excel isn't even open? It keeps happening to me, and it's the strangest thing.
It seems like interacting with Excel files sometimes prompts it - for example, I just turned on my computer this morning, checked my email, and then opened Google Chrome to upload some Excel files. Excel hasn't been opened at any point since the machine
booted up, but this Excel error popped up while I was uploading the files.
Checked the Task Manager because I was baffled (not that this is the first time it's happened), and there's no Excel application running, just that silly error message. Choose OK on that error and a VBA run-time error message appears (not even sure if it's
Excel VBA or Word/Outlook but I assume it's Excel - it's the good old 1004, application-defined or object-defined error).
Debug is greyed out, so it won't let me debug to see what the problem is. Choosing End brings the "Excel cannot complete this task with available resources" message back for one final performance.
This happens on a not-infrequent basis: Excel isn't open, and I randomly get this set of Excel errors: 1) "cannot complete task", 2) VBA run-time, 3) "cannot complete task" again. Then it's done, until the next time it happens. Weird.
I have 32-bit Windows 7 and Excel 2013/2010/2007/2003/2002 (I know!) but the issue only started after installing 2013. I also get the "cannot complete this task" message regularly when working in Excel (generally with Power Pivot or something legitimately
memory-hungry though), and restarting the application does the trick. I don't mind a heads-up when I'm gobbling up too many resources, but when Excel's not even open, it's a bit ridiculous. It's like I have a zombie Excel! Does interacting with Excel files
via upload/moving around Windows Explorer actually trigger some sort of Excel action in the background?
Any ideas would be most appreciated!! Thank you :)

Hi,
As the memory error messages , it can be very generic and don't always identify the real cause of the issue. We may try to use the KB that Mr. KR mentioned above to troubleshoot it.
On the other hand, if the file is xls format, we may convert to the new file format .XLSM and test.
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Excel/Q_28339883.html
Next, try to disable hardware graphics acceleration from File > Options > Advanced > Display section and disable Aero Themes (if you enabled) to check the results.
For the hangs and crashes issues, we may use ADPlus.vbs to troubleshoot:
http://support.microsoft.com/kb/286350/en-us
http://www.networksteve.com/exchange/topic.php/Excel_cannot_complete_this_task_with_available_resources_error,/?TopicId=39411&Posts=1
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it's helpful.
George Zhao
TechNet Community Support

MOVED: z77 overclocking help

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=162125.0

Quote from: Froggy Gremlin on 22-November-12, 08:44:12
I/O is ridiculously high. I can run Corsair RAM at 2800 on only I/O of 1.09v's, SA 0.970v's. Bernhard is right, '1.52v's' on the CPU is 'Absolute Max.', and the industry recommendation is not to exceed '1.400v's'.
Nominal DRAM V. for the platform is 'not' 1.65v's, but 1.50v's + or - 0.075v's. Your RAM sounds like overvolted, undertimed, overated RAM.
GT is the onboard graphics. GT ratio 32 is about all it can handle on default voltage.
It's your stuff, if you want to test higher, the risk to the components and lifespan is all up to you.
I think Bernhard wanted to link the Gen3 CPU datasheet rather than the Gen2.
I found datasheet for third gen of intel core, exact
G.skill ddr3 pc17000 is delivered with nominal voltage 1.65v for 2133Mhz, where is problem ? I've just made 3 hours of occt at 2600mhz, not tested higher for now
So I/o in auto mode is really too high with 1.25V ? so i took this voltage as nominal reference
Not so easy to overclock ivy bridge, I 'll stop to search highest frequency, 4,6Ghz even with 1.36V is not stable in occt with too high core temps 80°C, so sa xmad sayed, 4.5Ghz is a nice overclock
I'll try to optimise DDR speed and timing now.
Thanks for answers

MOVED: Z77A-G43 no SpeedStep with manually set multiplier

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=165305.0

I was told that Z77A-G43 should be just fine for my needs. Couple years ago I bought high end MB and it was a mistake, they are putting there so many useless stuff for which I need to pay ... (like firewire which I never used).
Z77A-G43 is fine for me but I was not aware before buying about all of its limitations. It is quite ok now when I figured out in UEFI where the needed options are hidden. Probably on better board I would be able to get from 200 to 400 Mhz more from CPU but to do that I would need to take off the IHS and pay almost 2 times more for the motherboard. (and pay for useless stuff like two quick PCIE ports (I am not planning to have a SLI/Crossfire), dozens of SATA ports etc.) If there were good board in decent price I would bought it but I do not need a motherboard for a homemade datacenter
Regarding Lucid earlier I had Abit (also the lower end) and I am not used to be virtually limited by having minimazed bios options or lack of software support. Of course this was different vendor with different business approach.
Asus cheap boards like P8B75-M have support for Virtu MVP ... so it's doable and affordable but MSI wants to have an argument over selling more expensive boards. Now I totally get their marketing strategy.
Thank you all for help, this topic can be closed.

H55M-ED55 Crossfire problem

I have installed two ATI HD5670 1GB on H55M-ED55. On Catalyst it does not show crossfire tab, it shows that secondary apapter is disabled. I have everything installed correctly and crossfire worked on my last Gigabyte motherboard(ga-h55-s2h). I read that the problem may have something to do with the second PCI-E being x4 at speed, when two GPUs installed, but by last motherboard was the same by PCI-E speeds. I know that this topic has been discussed before somewhere but i found no answer. Help?
I have windows 7 32-bit, latest drivers, Intel i3

Quote from: Bernhard on 06-June-11, 04:19:39
How many amps do you have on your PSU 12V rail? Did you use this PSU in your previous CF build as well?
https://forum-en.msi.com/index.php?topic=104805.0
30 if i have read it right. Yes, the PSU was the same on the previous build.

Cannot overclock 875 Neo Fis2R

I just got a Prescott and OCZ memory as gift from a friend. Before this I was using 2.8Ghz CPU at 3.1GHz at 218Mhz with Corsair. I tried to increase my overclock after I got these two items. The results are very annoyingly dispoointing
1) With Prescott I can go to 3.7Ghz at 218Mhz with No increase in Vcor with Corsair. Nothing I do can allow to increase anymore
2) With Prescott and OCZ I cannot above 215Mhz stable unless I boost the Vcor to around 1.6V and vdim to 3.0.... I can go to 230, But it cuases BSOD after 1 hr
3) With Northie and OCZ, I cannot overclock after 215 stable
Anything that I can do? I have tested for a week now and am convined that MSI and OCZ don't like each other. With 5:4 divider, I can get my Precott to go to 4.1Ghz at 1.6Vcor with Corsair..... But The exos cannot take the heat and it crashed after 15 minutes....

Sorry, but there is not any answer to this question. Overclocking is a matter og trying, failing, testing, trying and failing over and over again. You have to have top notch components and a good cooling system to go to the top as well.

Cannot deploy BPEL process with SSO to BPELConsole activated

I cannot deploy BPEL process with SSO to BPELConsole activated. Here is the error I get from JDeveloper (sorry for the french error message):
Problème détecté lors de la connexion au serveur "ssdvoiagu.dev.local.csst.qc.ca" sur le port "7781" : java.security.AccessControlException: access denied (com.collaxa.security.DomainPermission generique read)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
at java.security.AccessController.checkPermission(AccessController.java:427)
at com.collaxa.security.OC4JSecurityService.checkAccess(OC4JSecurityService.java:16)
at com.collaxa.security.SecurityService.checkDomainAccess(SecurityService.java:26)
at com.collaxa.cube.fe.util.ServletUtils.getLocatorWithoutUrlRewrite(ServletUtils.java:162)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:332)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Target BPEL process manager runs under SOA 10.1.3.3. When the SSO to BPELConsole is disabled, the deployment works just fine. Is there any way to make it work with SSO?

Please check:
http://blog.jpoot.com/category/oracle-appserver/oid-ldap/
We had some issues with SSO and SSL but everything is running now.
Marc

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4. However, I cannot record voice memos with my Bluetooth mic.

I can record voice memos fine using the built-in iPhone 4 mic. And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine. I can also use voice activated dialing, although it fails miserably interpreting numbers. However, I cannot record voice memos with my Bluetooth mic. I just get barely audible static. Any suggestions? Thanks.

Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
Thanks!

Cannot login to iCloud with Yosemite

Hi everybody,
a few weeks ago I updated my iMac to Yosemite. It all works fine except that I cannot login to iCloud with my wife's account.
When she logs in into her iMac account it sometimes appears a Mac configuration screen. It seems that everything's ok, because
the configuration finishes without error message, but when I look into the System Preferences -> iCloud her iCloud account is not active.
When I try to login with her ID a message appears "You can't sign in at this time. Please try again later."
It also doesn't work when I go into the System Preferences -> Internet Accounts and try there to login into iCloud.
It really bothers me because I didn't find a solution. And also I don't understand why it works with mit ID on my iMac account.
There is no problem to login with her ID on the Apple page, I've already tried that.
Thanks in advance!

Welcome to the Apple Community.
1. Sign out of your account
(If you are unable to do this because System Preferences has frozen, Force Quit System Preferences and try again)
2. When prompted, opt to delete, contacts, calendars etc from your Mac.
(You are only deleting this data from your Mac, not from iCloud, the data will be reinstated when you log back in. If you need to check that the data is in iCloud before deleting it go to iCloud.com and check each section for data)
3. Having logged out, check that the iCloud accounts along with their data have disappeared from the Mail, Address Book and iCal Applications.
(If necessary, delete the iCloud accounts from each of these application separately from each Applications Preferences)
4. At this point it may be worth trying to log into iCloud from the System Preferences iCloud settings again, if this works, all well and good, if it doesn't continue to step 5.
5. Open your User Library folder in the Finder. (When in the Finder, go to the Go menu, hold down the option key (alt) and choose Library when it appears in the Go menu)
6. Navigate to Library > Application Support > iCloud and drag the iCloud folder to your desktop. (This action only copies the folder and will provide you with a back up)
7. Select the iCloud folder again in Library > Application Support and drag it to the trash, enter your administrators password when prompted.
8. Restart your computer.
9. You should now be able to enter your ID and Password in system Preferences > iCloud and log into your account. Check the services you wish to use and once you are satisfied it's working as it should, trash the iCloud folder you copied to your desktop earlier.

Get parked items moved into a cleared status with out actually posting the

Hi,
I need to find a way to get parked items moved into a cleared status with out actually posting the item for payment. I do not have a PO or goods receipt to post them to. There are some invoicese which we are not paying but we want to keep those items in the history of the vendor. I need to be able to run a parked report of open items and not have these pull into that report. I have a some parked invoices for various vendors that I need to get moved into the cleared status.
Requesting you to provide suggestion on this to proceed.
Thanks and regards,
Rj.

hi,
i dont think there is any suh format.as per my knowledge u have to post park documents then only it would clear.
Regards,
Greeshma

After upgrading to Lion I cannot rewrite CD-RW with my Superdrive. I'm on an iMac24 10.7.1s

After upgrading to Lion I cannot rewrite CD-RW with my Superdrive. I'm on an iMac24 10.7.1

Might be corrupted audio preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following;
/Library/Preferences/Audio
Click Go then move both .plist files from the Audio folder to the Trash.
com.apple.audioDeviceSettings.pllist
com.apple.audio.SystemSettings.plist
Restart your Mac. See if that made a difference ...

I cannot sync my iphone with my computer

I cannot sync my iphone with my computer. The laptop wont even recognise the iphone on itunes. I have had the phone for almost over2 years now. Its a 3GS iPhone. How do I fix this?? I have tried hooking up the iphone to various computers and they also do not catch the iphone on itunes on those computers. What should I do???

If you are using a Windows based computer, try disabling a/v software and turning off the Firewall.
Disable antivirus software
Turn-Windows-Firewall-on-or-off
Then try syncing you iPhone.

MOVED: cannot overclock H55M ED55 with i3 540

Similar Messages

Maybe you are looking for