Moved computer to new desk; now can't connect to internet or network

I moved a computer to another office down the hall and now it won't connect to the internet or office network. Two other computers connected using the same ethernet plug and wire. Repaired permissions. Tried manually entering IP and using DHCP. What else should I try?

I'm no expert but maybe try adding a new location.
Network preferances -> location drop down -> new location
Then try manually entering all the information required.
Just a wild guess...
-Ollie

Similar Messages

  • HT5304 Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet  with cable or wifi ! can see network and router,. Help

    Hi Guys, I'm running snow leopard 10.6.3  recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet  with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !  

    recently had update
    Care to share which update?
    Have tried many things
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

  • Just upgraded iPhone 4 from 4.2 ios to 6.1.3 ios now can't connect to internet

    I just updated my friend's iPhone 4 from 4.2 ios to 6.1.3 ios  --  she had not updated it since she purchased it.  The uploads installed fine but now she can't access safari/internet and can't send pictures via text message.  She is strictly 3g with no wireless access at her home.  Could this be caused by the software upgrade?  If not, how/where do I start looking for the problem.
    Any help will be greatly appreciated.
    chuswysly♥

    Hi chuswysly,
    If your friend if having trouble connecting to her cellular network, the steps below might help:
    iPhone: Troubleshooting a cellular data connection
    Resolution
    Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
    Toggle cellular data off and then on again on the iPhone: Tap Settings > General > Cellular.
    Restart your iPhone.
    Check for a carrier settings update.
    Update your iPhone.
    Remove the SIM Card and reinsert it. Allow the iPhone to reaquire the network.
    If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
    Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPhone as new.
    Contact your carrier to verify that the iPhone is properly set up on the account with the appropriate, current data plan. If you are traveling internationally, you may need to turn data roaming on: Tap Settings > General > Cellular. Check with your carrier first to understand the cost of international data roaming. Also, see this article.
    Note: If your carrier does not appear in this list, verify with your carrier that you are using the correct cellular data settings.
    If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
    Hope this helps ...
    - Judy

  • Formated macbook and now can't connect to internet

    Hello people,
    I just formated my whole macbook because the windows version I installed on it wasn't working well and was actually slowing the mac.
    I remade my disk one ( only 1 partition ), installed everything, but now I can't connect anymore with my ethernet cable. I try to plug it in my normal Computer next to it and internet works. It just only doesn't work with the macbook. It's very strange because before I formated it, everything was working well.
    It cannot find the IP address alone and doesn't recognize the internet.
    Anyone got an idea?
    Thank you very much!
    Chris

    Carolyn!
    I first thought that with the little info I gave no one would even try to answer, therefor my astonishment when I tried to do what u said and internet worked!
    Thank you very very very much for you quick answer. I opened my macbook did what u said and in 2 minutes the problem was solved ( I spent the whole afternoon looking for forums where I could find an answer )
    Thank you! Very much you saved me much time!
    Have a good day!
    Chris

  • T41 re-installed Windows XP, now can't connect to Internet

    I recently re-installed windows XP, but now I can not connect to the internet. I downloaded an Ethernet Intel Pro driver, however when following the steps to complete installation, I do not have any options under "Network Controllers" it says this driver is not found.
    Can someone please advise what drivers need to be installed in order to connect to the internet again via ethernet and wireless?

    recently had update
    Care to share which update?
    Have tried many things
    Care to share?
    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • Swapped out AE for TC and now can't connect to Internet!

    Hello all.
    I just swapped out an Airport Express base station (the square one, not the old spaceship-shaped one) for a shiny new 1-TB Time Capsule. I figured that since 500 GB external hard drive for Time Machine backups is running out of space, so why not just get a TC so I don't have to worry about (a) hard drive space or (b) plugging in external drives again.
    I unplugged the AE and plugged in the TC. Everything else is the same: The TC is plugged into a Verizon DSL modem, and we have two MacBooks in our house. I configured the TC using the Airport Utility. Everything appears to be OK, except that I can't connect to the Internet any more.
    I have tried some of the tricks that have worked for other people on this discussion board -- namely, unplugging the DSL modem and the TC and restarting them. They don't appear to work. When I put the old AE back, everything works like a charm.
    Has anyone run into this problem before? I'd be grateful for advice and ideas. I don't want to use the TC as a secondary wireless network device, like a range extender. It's a pricey piece of equipment and it should do what it says on the box. I'm pretty sure that the fault lies somewhere between the DSL modem and the TC, but I'm not clever enough with these things to figure it out on my own.

    Same problem....3 calls to tech support and almost another one yesterday UNTIL I discovered that re-setting the TC (with the paperclip tool!) worked. The Airport Network, via TC, recognizes my Network and TC pops up into the airport Utility. i kept "losing TC in the Airport Utility page....it only showed AE/Base Station...not waht I wanted.
    I unplugged the Express (previous model,one that was prior to "X" capability, ie b/g) and left it unplugged.....this must be an issue) My ONE TO ONE instructors have offered to have a look at it, the AE,at my next appointment.
    I, too, have a DSL modem (Qwest) that I have unplugged without success (connections) Unplugging the units seems to work for some things but not this particular problem.
    Hope this helps.

  • Reset e3000 now can't connect to internet

    i was having issues with one of my devices after a power outage.  all my other devices worked (laptops, xbox, iphones, etc)
    i thought doing a reset on the router would get the odd device working again but all it did was mess up my internet.  i don't have the key or cd any longer from when i set it up.
    i get internet just fine when i plug directly into the modem with a cable.
    thanx

    possibly.... but it does see our network name at times (and others in the area at others).... it was a beast to connect the first day but finally did (we didn't do anything except keep telling it to connect over and over til it finally did).... and it kept connection except for one other power outage it didn't want to connect but finally did and had remained connected since (til the other day).... since then we've has a couple short outages and it just connected itself back again?
    and the same thing with my printer:  it didn't want to connect back again but finally did... and it's doing the same thing (and the printer is on a surge protector)  so far after changing the IP in the router everything else is connected without doing anything.... just automatic like it always is!
    the fridge is the samsung with wifi apps.... more of a gimmick, i guess... you get twitter (rolls eyes), pandora, weather (which i think is cool to have our weather/outside temp right there on the screen), some recipe app, and pictures (which again is cool on the screen saver!) oh... and AP headline news... 

  • Pressed reset button on Tomato flashed WRT54GL , now can't connect to Internet

    Hi everybody. I couldn't connect to the Internet yesterday and so I pressed the reset button on my WRT54GL which I flashed with Tomato firmware. This is the first time that I lost connection. I can access the http://192.168.1.1 site but I don't know what it the right configuration for my WRT54GL to be able to access the Internet. Did I bricked my router because I pressed the reset button? I can access the Internet when I plug the ethernet directly to my laptop. Any ideas? Thanks in advance. 

    You have to ask in a forum for tomato firmware. They should know what happens if you press the reset button. Here, in this forum, we usually deal with Linksys firmware.

  • Deleted Internet Explorer after installing Firefox and now can't connect to internet.

    Windows7 Network Adaptor - error code Ox80070426 -troubleshooter won't start. Windows security center won't start.
    Do I need Internet Explorer as well as Firefox?
    I'm posting this message from a windows XP PC as netbook won't connect to the outside world.

    Carolyn!
    I first thought that with the little info I gave no one would even try to answer, therefor my astonishment when I tried to do what u said and internet worked!
    Thank you very very very much for you quick answer. I opened my macbook did what u said and in 2 minutes the problem was solved ( I spent the whole afternoon looking for forums where I could find an answer )
    Thank you! Very much you saved me much time!
    Have a good day!
    Chris

  • Ox s lion reinstall now can't connect to Internet

    Reinstalled os x lion once finished I was no longer able to connect to the Internet! click on safari icon warning comes up immediately saying safari quit unexpectedly.  Click reopen to open application again. And it just brings up another warning box??

    What version of Safari do you have? Are you able to access, for instance, your email accounts? Or is the problem just Safari?
    Clinton

  • Can't connect to Internet or network and have a strange ip. Century link says its my iMac

    Does anyone have a clue about this. I've tried all the basics.

    Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
    Configure IPv4
    IPv4 Address
    Subnet Mask
    Router

  • I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help

    I have the new IPad and can't connect via bluetooth to any of my apple devices (IPhone 4s and appleTV) neither from my new IPhone 4s. When I turn the Bluetooth on, both devices keep in searching mode... I don't know what to do now... Please help... I can't pair any device because they can't find whitin themselves.

    Wmorlac wrote:
    I have the new IPad and can't connect via bluetooth to any of my apple devices...
    Correct... See Supported Bluetooth Profiles Here...
      http://support.apple.com/kb/HT3647
    Suggest you check the User Guides of your Devices to find the Method of what you are trying to do

  • After deleting files to clean my computer I now can"t connect my camera to my iphoto

    After deleting files to clean my computer I now can"t connect my camera to my iphoto  did I delete something and how can I add it back?

    Good idea from Klaus1!
    1058 Combo Update, 10.5.8...
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

  • I need to deactivate CS4 on computer that can't connect to Internet in order to install on new computer

    I need to deactivate CS4 on computer that can't connect to Internet in order to install on new computer..what steps can I take to remedy this problem?

    Since your computer cannot connect to the internet you may have to talk to a support person. See this page
    Contact Customer Care
    You can always install on a second computer without deactivating

Maybe you are looking for

  • How to pass value in Table import parameter of an RFC

    Hi all, I have an RFC in which import parameters are in the form of a table so now when i imported that RFC in my webdynpro application and Apply Service Template to it, it created the structure but when i applied form template to it all the inputfie

  • Confused about accounts

    We are trying to set up security using account but i'm a bit confused about it. We have for example a structure like this: * Company ***** Section 1 ********* subsection A ********* subsection B ***** Section 2 ********** subsection A ********** subs

  • Performance Analysis 怎么用collect -j 收集tomcat上的web项目的性能数据?

    Performance Analysis 怎么用collect -j 收集tomcat上的web项目的性能数据? How to user Performance Analysis  collect -j to collect web apps data on tomcat? Thank you!

  • Keep Item in Dock

    Hi Community, I read the Thread "Keep Item and Delete Item in Dock" but I didn't found a solution how I can integrate a similar feature in my Apple Script. I have a script with an if then else directive and my goal is that the Automator program icon

  • The Foxclocks 2.9.35 icon does not appear in status bar

    Recently I installed Firefox 9.0.1 and Foxclocks 2.9.35, but I cannot find the Foxclocks icon in the status bar. I have checked Options.