Moved CS4 files from WinXP to new Win 8.0 computer but get Licensing error. Now what?

Tried to move my CS4 Suite from Windows XP to new computer running Windows 8.0 and now receive Licensing for this product has stopped working, Error Message 5. I no longer have the disks for this program. Help!

Hi lcinlalala,
I would just like add that you can refer to this KB too:-
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
Prior to it, it will be best to check the technical requirements for CS4 at
http://www.adobe.com/store/en_gb/popup/software/creativesuite/mastercollection4/systemreqs .html
or
http://helpx.adobe.com/creative-suite/kb/system-requirements-cs4-point-products.html
You can also try changing the compatibility of the Windows8, please refer to :-
http://windows.microsoft.com/en-in/windows-8/older-programs-compatible-version-windows
http://www.eightforums.com/tutorials/6832-compatibility-mode-use-windows-8-a.html
Hope it assists your issue.
Regards,
Rajshree

Similar Messages

My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1). I was able to restart ok after installation; I even moved some files from my Galaxy 3 to the imac. But on the next (and all subsequent) restart attempts,

My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1).
I was able to restart ok after installation; I even moved some files from my
Galaxy 3 to the imac.
But on the next (and all subsequent) restart attempts, it hangs on the spinning wheel.
How to fix? Thanx in advance.

Mac OS X: Gray screen appears during startup

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Just moved CS4 Web from old mac to new using time machine. Apps won't launch. Help?

Just moved CS4 Web from old mac to new using time machine. I get an error when I try to launch a program on the new computer (150:30). After contacting live chat about the issue and providing all serial numbers etc. I was directed to a download. The download was a .dmg file that my computer did not recognize. It was suggested that I ask the experts on the forum how to resolve the issue. I have all the discs and serial numbers but the new macbook pro doesn't take discs (I guess they think all apps are downloadable now). Any ideas?

Hmm... I don't know why they sent you here... CS4 is not part of the Cloud
I have some download links for earlier versions of Premiere Pro and Premiere Elements, but not CS4 Web
My best idea is to take a LARGE USB memory stick to a friend with a DVD drive and copy your DVD over to the USB memory stick
Or, ask in the forum for your program(s) to find out if anyone has CS4 download links
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Lcat wont work - moved from winxp to NEW win7 64 bit (lr 3 to lr 3.2)

I'm moved my entire LR cat and images from winxp system to win 7 system. I installed 3.2 on to the new system as well as a drobo. All my images are on the drobo and LR 3.2 is on the internal solid state drive.
I copied the lcat onto an exteran drive and put it on SSD all by itself, but when i try to "launch" it it wont activate. I've tried to doubl click it and I've tried to go into the catalog from within LR 3.2.
My question is does anyone know why the cataglog wont work on the new system? I've tried the most recent lcat, and one saved a week before and both will not work on the new system.
Does the lcat have to go into a specific folder, or is there a problem that I've created by saving it to an exteran portable drive that I'm un aware of?
Any thoughts or advice would be much appreciated . . . thank you!
Tony Bynum

When you installed LR on the Win7 system it would have created a Lightroom sub folder in your my pictures folder. see the attached screen shot. The lightroom catalog from your previous system needs to be put into this Lightroom folder. I am using win7 64 bit also so the default location of the Lightroom sub folder should be the same as the screen shot.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

HT4527 I recently moved my files from windows xp to a new windows 8.1 pc using PCMover Express. When I open up a file within itunes, the music doesn't start in itunes, it starts in xbox music player. How do I move my itunes file so it opens in itunes?

I recently moved my files from a windows xp pc to a new widows 8.1 pc using PC Mover Express. When I open up a file within the itunes folder, it opens to the default player xbox 360 media player. How do i transfer my itunes folder so it opens up in my itunes account?

Hi kozzie17,
If your music is no longer opeing in iTunes by default on your Windows machine, you may find the following article helpful:
iTunes for Windows: How to make iTunes the default application for music and audio files in Windows Vista and Windows 7
http://support.apple.com/kb/HT3202
Regards,
- Brenden

How do I merge TB data from a dead Win 7 computer to a new Win 8.1 computer with TB installed?? The old HD is good and old files are available.

My old Win 7 computer died.
I bought a new win 8.1 computer.
I pulled the HD from the old computer and put it in a SATA/USB case. Everything is there.
I installed T-Bird on the new computer and downloaded current e-mail.
Now I want to merge the thousands of old e-mails that were on the old computer onto the new computer?
What steps should I take?
If necessary, I could live with losing the new e-mails that are now on the new computer.
John

http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird
But first save your new inbox, just make a copy outside your profile of
"profile" \mail\"mailaccount"\INBOX (pop-account) or
"profile" \Imapmail\"mailaccount"\INBOX (IMAP-account)
You can then import or move it to your local folders. (under a new name)

I have over 200 hours of HD video on 5 different TB Thunderbolt GRaid hard drives. I need to reorganize my projects, moving large files from one drive to another. Advice?

I have over 200 hours of HD video on 5 different TB Thunderbolt GRaid hard drives. I need to reorganize my projects, moving large files from one drive to another. Advice?

Do some testing to get your method working right with some less than important footage.
Copy/paste files where you want then.
Use the FCE Reconnect feature to tell FCE where the newly copied files reside.
Make sure the new location and files are working as expected with your Projects.
Delete the original files if no longer required.
Al

I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

It's quite possible, since you are using an MBA without Firewire, that it could take that long.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
>Classic Environment, and subsequently any Mac OS 9 or earlier applications
>Screensavers written for the PowerPC
>System Preference add-ons
>All Unsanity Haxies
>Browser and other plug-ins
>Contextual Menu Items
>Applications which specifically require the PowerPC G5
>Kernel extensions
>Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
>MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
>MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
>MacBook Air- Migration Tips and Tricks;
>MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
>In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
>
>In your /Home/Library/ folder:
>/Home/Library/Application Support/AddressBook (copy the whole folder)
>/Home/Library/Application Support/iCal (copy the whole folder)
>Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
>
>/Home/Library/Keychains (copy the whole folder)
>/Home/Library/Mail (copy the whole folder)
>/Home/Library/Preferences/ (copy the whole folder)
>/Home /Library/Calendars (copy the whole folder)
>/Home /Library/iTunes (copy the whole folder)
>/Home /Library/Safari (copy the whole folder)
>
>If you want cookies:
>
>/Home/Library/Cookies/Cookies.plist
>/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
>
>For Entourage users:
>
>Entourage is in /Home/Documents/Microsoft User Data
>Also in /Home/Library/Preferences/Microsoft
>
>Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M.

Still want a solution for me to use my previous existing SYNC account (from my XP comp., for which I have the security key) on my new WIN 8.1 computer.

My old XP computer died. When I loaded FireFux on my new WIN 8.1 computer, "I never got the option to enter my old security key to activate my existing SYNC account on my new computer."
At this point I am so disillusioned with FireFux' SYNC feature that I won't even try to activate it on my new computer. "SYNC is nothing more than a crutch made of Papier Mache; after you are using it for a while getting around pretty well, it will suddenly become non-functional and be found to be beyond repair."

THanks for your prompt and concise answer. Since i am used to working around to get things done, i can give it a try. after I do this ho do i go about deleting tabs from old computers, which show up in my list of "TABS FROM OTHER DEVICES", on other devices (I NOW have about five old devices)?
or,alternatively,is this all more work than it is worth? --as i noticed tha FIREFOxh as already started syncing up my devicest hat areusingth esame gmAILacco unt?
SORRYfor allthe crap wordbut ith inks hockwaveis having a neardeath- episodei, nsteadofsto ppingas itways doesw hileru nningfire fox.. remindme againw: "H yd o IUSE this browser?"

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

I recently purchased a new iMac with an external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. Comments? Help?

I recently purchased a new iMac with an 1 Terrabyte external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. I have not downloaded the external drive's software onto my old Mac because of this concern. May I simply "drag and drop" the contents I want transferred to the external drive, then set up my new Mac with the drive and download there? or is there a better procedure? Comments? Help?

If your intention is to copy a just documents and data (word processing files and music for example) then yes, you can use drag and drop. If you want to transfer data and applications and permissions, it would actually be easiest to connect the drive to your old computer and turn on TimeMachine. Once TM is finished, connect the drive to your new computer and restart it holding the option key to get into Recovery mode. Then you can use the restore from TM option to transfer your data and programs to the new computer.

Old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

old mac wont boot xcpt via firewire, want to move iphoto files from old to new, where are the pics stored?

Photos are stored in your home folder (~pictures).
Barry

Moved CS4 files from WinXP to new Win 8.0 computer but get Licensing error. Now what?

Similar Messages

Maybe you are looking for