MOVED: CX600x Laptop sleep mode problem? Help please

This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=144010.0

i have the same problem, I close the lid to make my macbook go to sleep, but when i open it up even though i hear the sounds it makes when it wakes up, the screen stays black, so i myself have to reboot the system loosing everything i was working in order to log back into the system.
But i have a problem, i dont have apple care! so i cant call apple for support, but i do know that these machines have a one year warranty, so would this problem fall under that category?

Similar Messages

I have an Mac air 2011 and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me

I have an Mac air 2011 and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me

i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

SOLVED : Lenovo X60 spontaneous sleep mode problem.

The problem is the flat panel screen! (either t-conn board and/or backlight). Viewiz HV121X03-100 Part No. 42T0359 FRU No. 13N7205. LCD : Wistron P/N:60.4Q443.001
I have 2 identical of Lenovo X60 laptops, with swivel-type-hinge at center. One has this spontaneous sleeping mode problem. I thought it was the Inverter problem - WRONG. Next some say it's the motherboard, CPU fan & heatsink, BIOS updates wrong also. All of these assumptions and theories are wrong diagnosed.
Solution replace the flat panel screen (very expensive because it has Wacom digitizer glass on top of the screen and board at the bottom.)
Roan
Computer Technician
Chapel Hill, NC

Hello @Tilia,
I have read your post on how your notebook computer is experiencing an issue with waking up from sleep mode, and I would be happy to assist you in this matter!
To further diagnose this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues in Windows 8. This should help configure your power management settings to effectively use sleep mode on your system.
Additionally, you can also restore your notebook's default power schemes by following the steps below:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter
reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

TS1702 my camera is playing up its stuck in negative mode. even when i play a video and on youtube it plays in black/white negative mode. anyone help please?

my camera is playing up its stuck in negative mode. even when i play a video and on youtube it plays in black/white negative mode. anyone help please?
<E-mail Edited by Host>

Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474.

SLEEP MODE PROBLEMS!!! HELP!

Is there ever going to be an update for mac os x v10.6.4 snow leopard that fixes the slow sleep problem? Since the update my macbook takes 45 seconds to go into sleep mode after I click on sleep in the top left corner. Is there any other option other than waiting for a new update?

As I've just learned, this is a matter of what hibernation mode your model uses.
See here: http://www.macworld.com/article/53471/2006/10/sleepmode.html
With this terminal command you can see what your machine uses:
pmset -g | grep hibernatemode
For fast sleep, it should be 0.
My problem is, however, that my Mini Mac keeps waking up from sleep. Very annoying.

Sending a bug report on the OS and a sleep mode problem.

I find the bug button in Safari really convenient for sending Apple bug reports. And when other applications crash, you usually get an error dialog with a button to send a bug report. But sometimes problems arise that require reporting, but which don't fall in either of these categories. It would be very handy to have a bug "button" for the OS, or perhaps just a menu selection in the Finder menu bar that invokes a bug report dialog box. I know you can dig around and find the URL for Apple's bug report web page, but I am always forgetting it -- I suppose I could just bookmark it, but then I'd just have to dig around in all the bookmarks to find it. Better would be a utility built-in to the OS for sending bug reports (like Safari's). It could also automatically transfer necessary info about the OS rev and such.
The problem I had was this. I have a script that puts my iMac to sleep. I put the script alias on the task bar and a single click puts the computer to sleep (easier than using the menu). Unfortunately, I sometimes click it by mistake when I am trying to click an adjacent icon in the task bar, and the Mac starts going through its cycle to enter sleep mode and is impervious to anything I do to try and cancel it. I tried pressing the space bar continuously to prevent it from going to sleep, but that did not work. Worse, when it went to sleep and I woke it up again, the task bar would not appear, clicking on app windows did not activate them, Finder menus could not be selected, etc. The cursor would move, but I could not do anything else. (I wish now I had noted if the clock in the menu bar was still advancing, but I didn't think to do that.) I powered down the iMac from the power key and rebooted. Things are working fine now.
I wanted to send a bug report on this, but realized that unlike Safari, there was no button or menu selection for doing that. So here I am.
Any suggestions are welcome.
TIA,
Drake

[email protected]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My ipad doesn't seem to make a sound when it is closed or in sleep mode to let me know there is an imessage until you see it on the screen that someone has imessaged. When you're taking it makes the swoosh sound, just not when it's in sleep mode. Help

Am having some problems with the sounds on my ipad, specifically my imessage notification sound when your ipad is in sleep mode and someone is messaging you. It seems to work with the swoosh sounds when you are actively messaging back and forth, but as soon as I close my ipad up and is locked or in sleep mode, I don't know anyone is messaging me until I look at my ipad. I've tried a few things.. But nothing has worked so far....Please help!

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can’t hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
 Cheers, Tom

T400 sleep mode problem

Hi, I got my new T400 last week, prett happy. However, I found an annoying problem with T400 entering sleep mode. Randomly, it fails to go into sleep mode. It just hangs there with no response at all from keyboard and mouse, the "sleep moon" light doens't turn on either. I have to hold the power button to forcely shut it down and reboot. Quite annoying.
I did some research on this forum, somebody suggested reinstall the Power Manager and its driver, I tried that and the problem remains. BTW, My video driver is also up to date.
Then I called Lenovo/IBM Atlanta support team, and was told to try to update my BIOS. So I preceeded with that too. Because I have Vista64, I have to download an iso image and burn a bootable CD with Roxio Creator (preinstalled on T400), and changed the BIOS startup sequence to boot from the internal CD drive. Somehow, T400 couldn't boot from the CD I burned with the BIOS update iso image. So I am back to suqare one.
Someone in this forum also suggested it might be a motherboard problem, but the tech rep I talked with didn't mention that.
Any suggestions on this sleeping mode issue? Or if you could help with the bootable CD with BIOS update? Thanks in advance!
(The BIOS update iso image is here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70351)

svchw wrote:
Then I called Lenovo/IBM Atlanta support team, and was told to try to update my BIOS. So I preceeded with that too. Because I have Vista64, I have to download an iso image and burn a bootable CD with Roxio Creator (preinstalled on T400), and changed the BIOS startup sequence to boot from the internal CD drive. Somehow, T400 couldn't boot from the CD I burned with the BIOS update iso image. So I am back to suqare one.
Any suggestions on this sleeping mode issue? Or if you could help with the bootable CD with BIOS update? Thanks in advance!
(The BIOS update iso image is here: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70351)
Sorry, I have to ask the usual iso burn question: are you burning it as a file, or as an image? If your cd is readable under windows (or whatever) and has a file on it called xxx.iso, you probably used the wrong burn option.
No offense, but this is the usual problem. If you are already handling this, sorry about the noise...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Closed laptop sleep mode

Is it safe to just close the laptop and put it in sleep mode for moving it around o taking it to work?, some people say is unsafe because the hard drive, as the only moving mechanical part, can get damage because of this movement. I think it`s safe because the hard drive shuts down completely. It is common for me to use the laptop this way, I mean not shuting it down always, I prefer just to closed it, how about you?

JETOBAR,
My Macbook Pro has never been shut down. Never. And, it has traveled with me, more than twice, all the way across this country (US). I figure it has traveled around 25,000 miles, just since this past March.
It is perfectly safe to simply sleep your Macbook Pro.
Scott

[M73-SFF] - multiple sleep mode problems

My new ThinkCentre M73-SFF will not enter into sleep mode. It also will not stay in sleep mode when I manually put it into sleep mode. It regularly would go into sleep mode when I first purchased it but not so now. I have searched on the net but cannot find any solutions. I have disables the screen saver thinking this was a problem but it did not solve the problem. Anyone know of a solution?
Moderator comment: Subject edited to match content.

THANK YOU @someotherguy for explaining the problem. This solved all my issues, also for a newly bought laptop. The more recent Windows 7 updates solve the issue by subsuming the fingerprint manager update under the system updates. I know this because it's definitely a different version of fingerprint manager from when I first bought the device last week.
Nevertheless, this is far more useful and informative than the helpdesk chat support personnel I spoke to.
Internetz wins again.

G4 sleep mode problem after latest update (10.5.8 build 9L30)

Hi,
My 'old faithful' 17" G4 PowerBook 1.67GHz behaves differently after the latest SW update to 10.5.8 build 9L30:
When ordered to go to sleep mode (german: "Ruhezustand") either by Apple-menu command or closing the display does no longer result i slowly flashing white standby-LED but the LED remains dark and the PowerBook will not resume when the display is flipped open again or the power-button is pressed.
It can only be reactivated with <ctrl><apple><power-button>.
Before that, it behaved as expected i.e. resuming operation after flipping the display open again or pressing any keyboard key when in power save mode.
The behaviour is the same if operated without attached power supply.
Any idea?
Thanks in advance
Ulrich
update log:
2011-06-24 16:56:41 +0200: Installed "Sicherheitsupdate 2011-004" (1.0)
2011-06-30 20:52:43 +0200: Installed "Java für Mac OS X 10.5 Update 10" (1.0)
2011-08-04 12:06:12 +0200: Installed "iTunes" (10.4)
2011-08-04 12:07:41 +0200: Installed "QuickTime" (7.7)
2011-08-04 12:08:33 +0200: Installed "Safari" (5.0.6)

O.K., after some more tries I toggled all settings in the power management.
Even the settings are now exactly the same as before, this solved my problem!
Maybe this info can be helpful to other MAC users in the future...

Windows 7 64 bit, CP1525NW wireless install,laptop sleep mode, now no wireless printing

I installed my HP CP1525 wireless printer through my Windows 7 64 bit computer to run wirelessly on my home network and it seemed to print fine wirelessly for mine and my wife's laptops and my iPad2. I put my computer into sleep mode and now today the wireless printer connection through my computer to the printer cant be found

Yup, with printer sharing, the PC cannot be asleep if the printer is attached to the PC via USB.
Since this is a network (wireless) printer, why not attach the printer to your wireles network direclty? Am I understanding the setup correctly?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Shut down without warning @ 30% , firewire not working , sleep mode problem

Hello!
I seem to have a combination of problems in which I believe that somehow they must be related altogether. I would appreciate any advice you may have on the cause of these problems and/or any solutions. Here's a detailed list of the problems:
1. The computer shuts down without warning at about 30% battery.
2. The Firewire doesn't seem to work when I try to connect my external HD.
3. The firewire Bus data is not shown on the System Profiler.
4. The sleep mode doesn't work; if I press the "sleep" icon, it doesn't respond to it.
5. When I close the lid and open it again, the screen remains turned off which requires me to force shut down the computer every time. Yet, it seems that its only the screen that does not want to come back up, the unit seems operational.
6. The sleep light indicator does not pulse when lid is closed, it stays on.
Actions taken:I have tried resetting the Power Management Unit (PMU) to no avail. Have the battery update. Have reset the PRAM.
Thanks in advance for any help!

Temp: (on start-up in regualr mode, about 2 minutes from boot up)
AMBIE: 25ºC
CPU A Heatsink: 31ºC
CPU A Proximity: 35ºC
CPU A Temperature Diode: 32ºC
Display Screen Proximity: 29ºC
Graphics Processor Heatsink 1: 34ºC
Graphics Processor Temperature Diode: 44ºC
Hard Drive Bay 1: 31ºC
Main Logic Board: 32ºC
Northbridge Chip: 55ºC
Northbridge Heat Sink: 50ºC
Northbridge Position 1: 39ºC
Optical Drive: 26ºC
Power Supply Position 1: 42ºC
SMAR Disk WDC: 33ºC
CPU Core 1: 33ºC
CPU Core 2: 32ºC
less then 5 minutes in the computer shut itself off...
went to safe mode, temp was as follows:
20 minutes running safe mode:
28ºC
50ºC
55ºC
56ºC
50ºC
54ºC - Graphics Processor Heatsink 1
64ºC - Graphics Processor Temperature Diode
47ºC
52ºC
86ºC
81ºC
62ºC
41ºC
74ºC - Power Supply Position 1
49ºC
few hours running in safe mode:
26ºC
49ºC
56ºC
56ºC
52ºC
54ºC - Graphics Processor Heatsink 1
64ºC - Graphics Processor Temperature Diode
50ºC
54ºC
89ºC
84ºC
64ºC
45ºC
80ºC - Power Supply Position 1
53ºC

How to repair sleep mode problem for thinkpad t510

hi, everybody
Recently, I found that the windows was wakeup once I touch the mouse when the laptop was in the lid closing position. A wireless mouse connected into my laptop. After I close the lid, the windows turns to sleep mode. But once I move the wireless mouse, the windows is wakeup with closing lid. How can I fix this problem？ I dont want the window wakeup once I move the wireless mouse. I just simply want windows turns to sleep mode after I close the lid. My operation system is win 7.
Many thank.
Solved!
Go to Solution.

Uncheck the Wake computer checkmarks in Device Manager for your wireless mouse. If it's Bluetooth, disable it for that too.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

New mac user..possible imac problem,help please!

I've had my imac for about 3 weeks and in the last 4-5 days after waking up from sleep mode it has been lagging severly. At first it was for about 15 mins now its been going on for over 45. First of all, applications and anything I click on in them takes a very long time to open and sometimes several clicks. The rainbow ball curser seems to come up for much longer than usual. Then when I type, nothing shows and I have to click on the window to get what i typed to come up. I have plenty of room on my harddrive and 1 GB RAM that was factory installed. Being a new mac user, I really don't know what to do about it. Anyone know whats wrong or what to do?
Thanks in advance.
(sorry if there is bad typing in this post, dealing with the text lag right now)
40GB ipod, imac G5 20 w/isight, Dell XPS Mac OS X (10.4.3)

Hello Christine:
If the logout/restart does not help, call Applecare. Rather than some of us trying to troubleshoot, the Applecare technicians will walk you through the problem identification process. Suffice to say, what you describe is definitely not normal.
Barry

MOVED: CX600x Laptop sleep mode problem? Help please

Similar Messages

Maybe you are looking for