MOVED: Did MSI posted wrong specs for the 965 neo chipset ?

This topic has been moved to Intel Core Duo and Core 2 Duo based boards.
https://forum-en.msi.com/index.php?topic=99397.0

Quote from: Maesus on 08-August-06, 23:17:20
it's only 1GB for DDR2800 per DIMM, don't go for 2GB DDR2-800 per DIMM. ok. So either you have 1 stick of 1GB DDR2-800, no problem, 2 sticks, 3 sticks or 4 sticks, no problem. Just that you cannot have 2GB of DDR2-800 per DIMM. Hope you understand.
Hey, I could use some help.
Here's what I got:
E6400 Allendale (333MHz FSB x 8 = 2.664GHz this was with the 256MB Corsair stick)
MSI P965 Neo F
X1800XT
Seasonic S12 600 watt PSU
I can't get any RAM to work with this thing. Here is what I've tried:
2GB (2 x 1GB) OCZ DDR2 PC2-5400 (667MHz) Gold GX XTC RAM
- No post. Fans on, but nothing else. Used a spare 256MB DDR2 533MHz Corsair stick of memory and everything worked.
- Tried increasing vdimm up to 2.2V still wouldn't work
- Tried using only one stick, and tried using different slots.
- RMA'd back to OCZ (per their request)
Next I tried:
2GB (2 x 1GB) Team Xtreem DDR2 PC2-6400 (800MHz uses D9 Micron chips)
- No post. Fans turn on, but I get nothing else.
Both sets of RAM have been tested on an Intel P4 540 system and work fine.
Any help would be very much appreciated.

Similar Messages

Did MSI posted wrong specs for the 965 neo chipset ?

i notice some mistake maybe MSI mods could verify.
1) on the site it mention it will only support up to 2GB of DDR 800 rams
i think it should be 4GB of DDR 800 rams instead/
2) in the manual page 2-7, they mention it cannot support 1GB of DDr800 module
but it should be 1Gbit, i think it created some confusion.
Can anyone from MSI verify and update the site/ manual if possible
Thanks

Quote from: Maesus on 08-August-06, 23:17:20
it's only 1GB for DDR2800 per DIMM, don't go for 2GB DDR2-800 per DIMM. ok. So either you have 1 stick of 1GB DDR2-800, no problem, 2 sticks, 3 sticks or 4 sticks, no problem. Just that you cannot have 2GB of DDR2-800 per DIMM. Hope you understand.
Hey, I could use some help.
Here's what I got:
E6400 Allendale (333MHz FSB x 8 = 2.664GHz this was with the 256MB Corsair stick)
MSI P965 Neo F
X1800XT
Seasonic S12 600 watt PSU
I can't get any RAM to work with this thing. Here is what I've tried:
2GB (2 x 1GB) OCZ DDR2 PC2-5400 (667MHz) Gold GX XTC RAM
- No post. Fans on, but nothing else. Used a spare 256MB DDR2 533MHz Corsair stick of memory and everything worked.
- Tried increasing vdimm up to 2.2V still wouldn't work
- Tried using only one stick, and tried using different slots.
- RMA'd back to OCZ (per their request)
Next I tried:
2GB (2 x 1GB) Team Xtreem DDR2 PC2-6400 (800MHz uses D9 Micron chips)
- No post. Fans turn on, but I get nothing else.
Both sets of RAM have been tested on an Intel P4 540 system and work fine.
Any help would be very much appreciated.

RAM clarification for the P965 Neo F...

I was constructing my first build today, when I came across an interesting note in the user guide for the P965 Neo F. It stated:
Important:
1GB DDRII 800 SDRAM memory module not supported.
Yet on the MSI site it states (for the P965 Neo F):
Supports up to 8GB memory size (with DDR2 800, memory only up to 2GB)
I've bought http://www.newegg.com/Product/Product.asp?Item=N82E16820145590 for this build so I hope I haven't wasted my money...
Contradictory?
Does anyone have the bottom line for this?
Thanks guys.

Quote from: NovJoe on 17-August-06, 14:24:00
It is true that the board only supports up to 2Gb of DDR 800MHz RAMs. I'll let you guys know about whether it is true on the 1GB RAM not supported.
So... 2Gb of DDRII 800MHz would be supported, but possibly not 1Gb, correct?

HT3215 Does anyone know the best (or acceptable) outputs (v and mA) for AC-USB chargers? I have a few post-market choices, and I can't get the specs for the bona fide Apple $29 charger.

Does anyone know the best (or acceptable) outputs (v and mA) for AC-USB chargers? I have a few post-market choices, and I can't get the specs for the bona fide Apple $29 charger. Thanks; no hurry.

Does anyone know the best (or acceptable) outputs (v and mA) for AC-USB chargers? I have a few post-market choices, and I can't get the specs for the bona fide Apple $29 charger. Thanks; no hurry.

My ipad is in recovery mode that failed,it shows the progress bar but is frozen. Itunes shows the wrong name for the Ipad but the correct account.

my ipad is in recovery mode that failed,it shows the progress bar but is frozen. Itunes shows the wrong name for the Ipad but the correct account.

You're gonna have to restore the iPhone from your last backup with iTunes. You did do a backup before you attempted to update the software didn't you?

TS1702 I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck.

I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.

What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
 Cheers, Tom

First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longer have access to network settings

First I got a wrong password for the network and the application error after a while that I wanted to enter the correct password no longerhave access to network settings

Unfortunately, it says I can't delete anything without the missing password.

IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball. I almost think it is looking in the wrong place for the pictures. How do I redirect it back to the Mac hard drive?

My iPhoto is not responding. Whenever I click on the iPhoto icon I get a twirling beachball. It is as if the machine is looking in the wrong place for the photos. How can I see where the machine is looking to find out if this is really the problem. How can I see the path?

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
If that's the case Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Using a "Posting Key" relevant for the calculation of sales

Hi All,
if I make a posting by F-02 using a "Posting Key" relevant for the calculation of sales, I wonder: in which table SAP registers the data of sales?
Is there the way to modify the relevance for sales of that posting?
Thanks

Hi
As far I know, sales figures are getting updated in the following summary tables:
KCN1 for Customer related.
LFC1 For Vendor realted.
Regards

Specs for the Credit Release Report ?

Hi,
I need this report urgently, can anyone help me out in creating the specs for the same :-
Fields Of The Report
a) Sr. No.
b) Business Area
c) Sales Representative
d) Customer Code
e) Customer Name
f) Sale Order Number
g) Qty
h) Delivery No.
i) Invoice No.
j) Invoice Amount
k) Reason For Credit Check Release.
If any query has to be run, could u pls tell me how to do the same.
Regrds,
Binayak

Tcode VKM2 (released orders) shows many of the data you need. I think that you can improve this report without modification searching for some note in OSS.
Roberto

Event GR Posted is denied for the DBM Order - External service procurement

Dear Experts,
We are facing the below mentioned issue while trying to perform goods receipt for external service procurement.
Error - "Event GR Posted is denied for the DBM Order -------XXX"
The error message is raised when the tracking number is maintained in the Purchase order of External servce,
If we remove the Tracking order (DBM Job order number) from Purchase order and then perform Goods receipt (MIGO) then the error does not exists.
Request you to help us with suggestion.
Regards,
T.R.S,Praveen

Hi Sachin,
Thank you for your valuable feedback.
Requirement Tracking number in Purchase order item screen. Field name - BEDNR.
Please note that the job order number is not manually updated by us. It is automatically updating in PO line item through Purchase requisition details as per standard behavior.
If we perform goods receipt then we are getting error message as "Event GR Posted is denied for the DBM Order -------XXX".
Goods receipt is working properly if we remove the Job order number in tracking order field in PO.
Regards,
T.R.S.Praveen

WIP Closing entries not posted in FA for the month of March

Dear Team,
WIP Closing entries not posted in FA for the month of March -2010. Please check and revert immediately. Print screen and KKAO -WIP Report given below for your reference. Same issue is there for FISHER also.
Regards,
Suma Nalluri.

thks

Power input specs for the zen x

i need to know the power input specs for the zen xtra, since i need to buy a new charger ASAP. Can anyone help me?

You might want to ask this in the MacBook Pro forums… you're in the MacBook forums.

Hello, I am running a Mac book pro soft. 10.5.8 version. Since june the current year I did not get any updates for the software or any kinds of other application, in my opinion that's weird for such a company.

Hello, I am running a Mac book pro soft. 10.5.8 version. Since June the current year I did not get any updates for the software or any kinds of the other application, in my opinion that's weird for such a company.
The problem that I have now is with the Iphone 5 which is not supported for the current Itunes and I can not download the Itunes 10.7 version. What I supposed to do in this case because I can not syncronize at all.
Please give me a hand as soon as possible.
Many thanks

Mac OS X 10.5.8 is years old, 3 major versions out-of-date and unsupported at this point. You will never get any further updates for 10.5.8, and more and more applications will stop supporting 10.5.8 as time goes on. As mende1 points out, you can buy Snow Leopard (Mac OS X 10.6), which will let you use your new iPhone with your computer, but you need to make sure your computer's hardware is supported. See the system requirements for Snow Leopard:
http://support.apple.com/kb/SP575
If your computer cannot run Snow Leopard, you will need to either buy a new computer or abandon any thoughts of syncing the iPhone with that computer.
Also, note that you'll get far better integration of your iPhone and your Mac if you're using Lion (Mac OS X 10.7) or Mountain Lion (Mac OS X 10.8), which are required to use iCloud. Of course, the requirements of those systems are even steeper than those of Snow Leopard:
http://support.apple.com/kb/HT4949
http://support.apple.com/kb/HT5444

The disc is the wrong type for the operation

Hello!
I'm using DVD Studio Pro 4 and as I try to burn a double layer DVD I get a message saying "The disc is the wrong type for the operation". I've tried several brands, but I get the same message. What can possibly be wrong?
Thanks for helping me!
/Andreas from Sweden

If you are trying to do this on the internal Superdrive they have problems writing to Dual Layer DVD disks of any make and or type.
IMHO the DVD drive Apple uses is not very good.
If this is a fairly new Mac system I suggest you take it to an Apple store and show them that it can't write to Dual Layer DVD discs of any make and maybe they will replace it with on e that will.

MOVED: Did MSI posted wrong specs for the 965 neo chipset ?

Similar Messages

Maybe you are looking for