Moved from DC to NC now smtp authentication with Cox won't work on roadrunn

I just moved from DC to NC. I have a cox.net email I prefer to use. Cox allows smtp authentication over other ISPs. I had RCN in DC and it worked perfectly. But now, with Time Warner (RoadRunner), it doesn't work. (Incoming still works fine, this is just about outgoing/smtp.) The smtp authentication is set up EXACTLY as it was in DC, but the connection just times out. Oddly, it works fine when I am connected directly to the cable modem. BUT, it does not work when I am connected to my wireless network using an airport extreme. I have deleted the smtp server a hundred times. I have selected SSL and unselected SSL a hundred times. I have tried no authentication. I have tried removing the "cox.net" after my name in the outgoing mail settings. I have reset the airport extreme to factory settings and set the network up again. NOTHING is working. Why would this work directly connected to the modem but not through the EXACT SAME WIRELESS NETWORK and settings I had with RCN??? Any tips/help is greatly appreciated. Oh, and all of my other non-RoadRunner smtp authentication accounts work fine. And my me.com email works fine.

Thanks again, Bob! Here is the error I'm getting for all three usual ports (25, 465 & 587):
CONNECTED Apr 07 08:26:51.776 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:smtp.west.cox.net -- port:465 -- socket:0x116c00450 -- thread:0x116f54800
READ Apr 07 08:26:52.090 [kCFStreamSocketSecurityLevelNegotiatedSSL] -- host:smtp.west.cox.net -- port:465 -- socket:0x116c00450 -- thread:0x116f54800
554 fed1rmimpo03.cox.net bizsmtp connection refused from 71.77.138.209
It looks to my untrained eye that the cox servers are refusing me. Is that correct? So I should call cox, right? And how do I find the IP address that I'm being refused under?
Sorry to be so ignorant, but your help is greatly appreciated!

Similar Messages

How do I change my iPad/iPhone to new region. Moved from Australia to HK now cannot use App store. Any ideas?

How do I change my iPad/iPhone to new region? Moved from Australia to HK now cannot use App store. Have changed regional settings on both. Any ideas?

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore.

Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore. I restored it, I backed it up and I held the power and Home buttons for the reboot and still nothing. I've been looking to see if any one had the same problem and one guy did but they tOld him it was his hardware, but I don't think it was because my friend was able to get it working but it would stop working again like in 10min. So, has anyone had the same problem and can help? Please, I will greatly apretiate it. :)

What do you mnean that the screen does not work?
When you touch the screen the iPod does not respond?
Nothing shows on the screen?
Or what?

HT203180 shows (I already of 5 of them) now it says they can't be played on my ipod, and I purchased them from Itunes? I don't understand why they won't work?

I purchased the remainder of shows (I already of 5 of them) for a TV series now it says they can't be played on my ipod, and I purchased them from Itunes? I don't understand why they won't work? I tried the conversion but it's greyed out and not chooseable. But again purchased from itunes so they should work according to the above article. Can anyone help me?

Dracwolley wrote:
They can. The video needs to be converted, though. If it's in your library, just go to Advanced (in the top menu), then click on "Make iPod/iPhone Version." Wait a while, and when it's done, click and drag. Or for a quicker alternative and less space lost on the iPod, download Handbrake here.
Yep.

Broken SSL/TLS SMTP authentication with Outlook Express

Hi All,
I've created two ports for SMTP-Authentication with required SSL/TLS : port 25 and port 587. Everythings work fine on port 25 (both smtp-auth and ssl/tls works).
But when using Outlook Express with port 587, the problems happens:
Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.cbn.net.id', Server: 'smtps.cbn.net.id', Protocol: SMTP, Port: 587, Secure(SSL): Yes, Error Number: 0x800CCC0F
I've already disable windows firewall, Desktop Antivirus etc. but still not works.
Does anyone has the same problem? Thank you.

Sorry I'm a little late to the party.
This is a bug in OE. It is attempting to do an SSL negotiation immediately when the connection opens, like what a web browser does for HTTPS connections, rather than using the STARTTLS mechanism to start TLS in the middle of the connection. In other words, it's attempting to use the old, never actually standardized SMTPS protocol if you attempt to do secure SMTP on any port other than 25. When we deployed mandatory SSL/TLS here, we had to deploy an SMTPS server on port 465, just for OE users (our mail relay server is not an IronPort).
SMTPS was never standardized, never even made it past one Internet-Draft. It's allocation of port 465 was later revoked by IANA and reassigned to another protocol. Yet it was treated as gospel by many mail client authors. I refused to support it on our mail server until it became obvious that OE simply wouldn't work otherwise (getting correct STARTTLS operation by using port 25 is not always available because of ISPs doing port 25 blocking). I don't blame IronPort in the least for not supporting it, although it does make this situation harder to resolve.
I have learned to hate OE.

I had to get a new ITouch and now my app Tempo Magic won't work. It allows me to do evertyhing but play the music. When I hit play it kicks me out - any help would be appreciated. Thank you

I had to get a new ITouch and now my app Temp Magic won't work. It allows me to select the temp and music I want but when I hit play it kicks me out. Can someone please help me resolve this? Thanks!

Try here:
iOS: Troubleshooting applications purchased from the App Store

I recently upgrade my mac air to maverick and now my version of iphoto won't work. What can I do??

I recently upgrade my mac air to maverick and now my version of iphoto won't work. What can I do??

This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1
OT

So, now my CD/DVD drive won't work

I made the BIG mistake of upgrading to LION last week.   Up until that moment, EVERYTHING was working fine on my MAC.   I downloaded the software just fine but when I went to install it I received a message saying my hard drive was full.   I'm sure that I had plenty of room left and would have thought that if it was full I would have received that message PRIOR to the download.   Nevertheless, I tried it again. This time I received a message saying that there was something wrong with my hard drive and it needed repairing.   I did the verification and tried to do the repair but it wouldn't work.
Made an appointment with the Apple Store, (at least I live near a store), and they went through all the diagnostics and said, "There is nothing wrong with your hard drive yet we are unable to install the upgrade ... meaning that my computer will not function. I had to buy a new hard drive and have them install LION on it.   Before I left the store I told the tech guy that I'd like to turn it on to make sure it would work ... guess what ... it wouldn't.   "I can't understand it", he said, "It was working just fine a few minutes ago."   I had him try it a few more times and then he advised me that they'd have to do it again and for me to come back (again).
So, now I have a new hard drive and a new operating system ... but I had to pay for it in cash, frustration, time, and lost data (my email archive mostly) ... BUT ... now my CD/DVD drive won't work.   I've had to reload software with an external drive.
What the **** ????
Anyone with some thoughts on this?
(Plus I've had to create a new MAC ID?   Why won't it accept my old account ID?)

Thank you again ... I wasn't aware of that bit of information.
I've never used Toast before but have heard of it. I just went to their website and watched a quick video. I'm a tad confused though ... is Toast able to rip movie DVD's before burning a copy?   I used to have some software that could do this but, of course, it's now gone with my new hard drive.

I bought an unlocked iPhone 5s from USA and travel back to my counry but won't work in my country

I bought an unlocked iPhone 5s from USA and travel back to my counry but won't work in my country

Well, there is nothing anyone here can do for you. Did you actually purchase it at an Apple Store, or at another retailer like BestBuy, HH Gregg, a mall kiosk, T-Mobile, AT&T, etc?
The ONLY source for unlocked iPhones in the US is Apple. If you purchased it anywhere other than at an Apple Store, you purchased a locked phone.
You can call AppleCare and give them the serial number of the phone to confirm the status of the lock.

Updated to 7.7 - now youtube and flash games won't work

I upgraded to 7.7 a while back and ever since then I can't get youtube videos to load or play flash games online though safari. Any idea what could be causing this problem. Please let me know!

shakejke wrote:
i updated to maverick and now my toshiba hard drive won't work
whats the format on the external HD?
verify same on another Mac, its likely a dead SATA card inside the external enclosure.
One assumes you arent referring to a 2012 Air with a Toshiba SSD, since the Air contains no hard drives, only a SSD.
2013 Air use Sandisk or Samsung SSD.

I updated to maverick and now my toshiba hard drive won't work

i updated to maverick and now my toshiba hard drive won't work

shakejke wrote:
i updated to maverick and now my toshiba hard drive won't work
whats the format on the external HD?
verify same on another Mac, its likely a dead SATA card inside the external enclosure.
One assumes you arent referring to a 2012 Air with a Toshiba SSD, since the Air contains no hard drives, only a SSD.
2013 Air use Sandisk or Samsung SSD.

Best practice for moving from a G5 to a new Mac with SL

I am receiving my new iMac today (27") and am very excited
However I want to move over using the best practices to assure that I remain excited and not frustrated
My initial thoughts are to boot it up and doe the initial set up - to move my iPhoto library over and to use migration assistance to move the rest of my data files
Then to install all of the extra software that I can find the packages for from the original installation disks
And then finally to use migration assistant again to move over any software that I can not find original disks for (I've moved from Mac to Mac to Mac over and over and some of the software goes back to OS 9 (and won't run anymore I guess)
Is this a good way
OR
will I mess up doing it this way
OR
am I spending far too much time worrying about moving old problems over and would be better off to just turn MA loose and let it do its thing form the beginning?
BTW - mail crashes a lot on my existing system - pretty much everything else seems ok - except iPhoto is slow - hoping that the new Intel dual core will help that
LN

Migration Assistant is not a general file moving tool. MA will migrate your Applications and Home folders transferring only your third-party applications. MA will transfer any application support folders required by your applications, your preferences, and network setup. You do not have a choice of what will be migrated other than the above. MA cannot determine whether anything transferred is compatible with Snow Leopard. I recommend you look at the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009
In general you are better off reinstalling any third-party software that is PPC-only. Otherwise update your software so it's compatible with Snow Leopard.
Do not transfer any OS 9 software because it's unsupported. You can transfer documents you want to keep.
Buy an external hard drive to use for backup.

CFMAIL SMTP authentication with CF5

I need to use CFMAIL to send email notifications via an
exchange server. The issue: the server is running CF 5 and the
exchange server requires SMTP authentication. As you may all know,
there's no way to pass a username and password in CF5.
So my question is, is there a module available for CF5 that
will achieve similar results.
Sadly I can't upgrade to CF MX 6, 7 or 8.

It's been quite a while since I worked with CF 5, but you can
try setting up the mail server address like this:
username:[email protected]
On a side note, is there any reason why you (or the client)
are not considering an upgrade? I mean, I think HTTP 1.1 was still
the standard when 5 was released - it's about 40 "
technology years" old now. *just wondering*

When I try to download the latest version of itunes to my i phone, I get a message saying songs I have purchased on the phone need to be moved from "purchased" to a Library before continuing with the download. How do I do this?

When I try to download the latest version of itunes on my computer, which is tethered to my iphone, I get a message saying the music on my phone needs to be moved from "purchased" to a Library. I search and can't find instructions on how to do this. Please help!

Transfer Purchases = iTunes > File > Transfer Purchases
http://support.apple.com/kb/HT1848

How do I delete zibzoom toolbar from my computer. It says its experimental and won't work with 5.0.

I joined the Zibzoom.com company they were encouraging everyone to download the zibzoom toolbar so I did but it don't look like it all installed properly. So I want to remove it and nothing I've trie has worked. Finally I looked it up under firefox add ons and it shows that it is experimental and says it won't work with firefox 5.0 it will work with 1.0 trough 4.0 this company should not have been trying to get people to signup for this stupid thing. Now I can't get it off.

You should be able to find it in the Extensions menu if it's been installed. Click the orange Firefox button, go to Add-ons, then Extensions. Remove it from there.
See also: http://kb.mozillazine.org/Firefox_:_FAQs_:_Uninstall_Extensions
But it does clearly state on the Add-ons site that it's not designed to work with Firefox 5.0.1 See screenshot.
If this answers your question, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same subject.
Thanks.

Moved from DC to NC now smtp authentication with Cox won't work on roadrunn

Similar Messages

Maybe you are looking for