MOVED: Got NX8400GS TD-256E video card and it conflicts with onboard video

This topic has been moved to VGA products.
https://forum-en.msi.com/index.php?topic=141769.0

Similar Messages

Drivers assistance required for graphics card and fingerprint reader with W8 & Pavilion DV7-6B01ED

Hi - I own a HP Pavilion DV7-6B01ED and recently upgraded from W7 Home Premium to W8 Pro. Everything appeared to work fine except for the graphics card I have which now seems to always be on with the fan running, getting hot and running down the battery much more than before. I can not confirm what was reported as the graphics card in W7, but it is reported as the AMD 7000M after the upgrade. My invoice reports that it is a HD6490. Further to this, W8 reported an issue with this device in Device Manager.
Due to another issue (not hardware related) I decided to do a clean install of W8 which would also let me clean things up and to re-partition my disk.
In doing so I deleted the HP_TOOLS and the Recovery partitions. I'm not against recreating these but needed to delete them as I had 4 primary partitions and could not work within the restriction that comes with this. I understood from reading online that these can be recreated and the necessary tools re-installed (or another solution with DVD / USB employed). If the solution to my problems requires these to be installed, I'm happy to do so.
After the clean install, I continue to have the graphics card issue (same details as above) and the other issue I have is with the fingerprint reader. It shows up as an unknown device after W8 install (it did not have any issues after the initial upgrade I performed though).
So I've done plenty of things to try to rectify the issue and this includes installing the HP Support Assistant in the hope that this would help with the drivers. Instead of going through all the steps I've undertaken (I've read plenty in this HP forum and outside of the forum) and used certain W7 drivers, installed this that or the other program but unfortunately to no avail. I cannot get the fingerprint reader working and I still have a very hot and noisy laptop.
I'm good enough with OS and device driver installations and happy to get stuck into some unorthodox solutions if needs be. What can I do to resolve these issues?
Regarding the graphics card - is it a case that AMD have yet to release an updated driver? If so, I can live with that but in the meantime I would like to turn off the AMD card and work only with the integrated Intel graphics. Disabling the device in Device Manager does not seem to work. How do I do that?
The fingerprint reader is no big deal, but ideally I would like it working. What to do here?
If I need to do a re-install of W8 again and then get stuck into the driver installations I'm good with that, but would like to do it in a manner that will let me resolve these issues in the future without too much hassle.
The spec of my machine is: HP DV7-6B01ED 17.3FHD / i5-2430 / 8GB / 750GB HDD / HD6490
Thanks!

Hello AttackofZaq....
Thanks firstly for your reply. I re-installed W8 to start from scratch.
OK, so I thought the AMD driver worked. I had installed it before I posted to the forum but then the problem seemed to have returned. I'll have to play with the settings because just as I type this the fan has started for no reason, same problem as before. Is there any chance Windows Updates in interfering?
Regarding the fingerprint reader - it hasn't helped. In Device Manager I now see Biometric Devices > Validity Sensors (WBF) (PID=0018). Is there some further software I require in order to use the device. I'm going to install SimplePass to see if that's needed.
I'll be back with an update.
chemus79

I preordered album weeks ago with a $25 card and was left with $10. But why do I have to purchase it again?!

I preordered Lana Del Rey's Ultraviolence album weeks ago with a $25 card and was left with $10 in my account. So I get an email saying that Ultraviolence was ready download. I go on iTunes and I have to buy it again, wth?!?!?! I have the receipt number and everything. Why do I have to buy it again? I signed in and out of my account to see if it would make a difference but nothing changed. Oh and this wasn't the first time this happened. I was jus dumb enough to purchase the album again when it came out. Did I just get ripped off?

What happens when you try to download the album, and how are you trying to download it ?
You aren't charged at the time of pre-ordering, only when it is released - you are only charged for items when they become available (e.g. if tracks were released ahead of the actual album then you would be charged for those tracks), between pre-ordering and release you could cancel the pre-order so you can't be charged until release.
Have you checked the purchase history on your account : http://support.apple.com/kb/HT2727 ?
If the album shows on your purchase history then does the Store > Check For Available Downloads menu option on your computer's iTunes download it, and/or does it show in the Purchased link under Quicklinks on the right-hand side of the store homepage for downloading ?

I got the new ipad this weekend and had problem with apple ID - thus resulting in 13 charges to my credit and debit card with itunes and nothing loading onto the ipad - does anyone have an idea as to how I can get this credited back to my accounts?

I bought the new ipad this weekend and had £15 credit. For some reason it charged 13 items to be credit and debit card and did not load the item onto the ipad- does anyone know how I can get this credited?

More update on y situation. Now on both the IPAD and IPAD2 I can not got to view my purchase History, it says it can not connect to the ITUNES store, but yet I can still d/l apps and can view my account etc etc etc.

I got given a $100 gift card and when i enter the code (making sure it is correct) it says its invalid

I recieved a $100 itunes giftcard for my birthday and when i try to enter it, it says its invaled!
ive tried many times making sure everything is correct but it doesnt work????

Was the gift card issued in the same country as your account is based ? They are only valid in their country of issue. If it was and this page doesn't help then you will need to try contacting iTunes support (you will need to give them the serial number and activation code from the card) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

TS3366 iOS 7: Back and Forward Gesture in Safari and Mail conflicts with Panning Gesture

Back and Forward Gesture in Safari and Mail is different than the back and forward gesture used to swipe between Home screens. The simple swipe with the thumb straight does not work in Safari and Mail, it conflicts with the Panning gesture. It should be relatively easy to improve the algorithm to allow for that gesture to work.

Indeed, swiping back from pdf pages sometimes works, but most often does not.
It seems that the swiping gesture has in all cases changed slightly. It is now necessary to swipe a little until a portion of the previous page is uncovered, and only then can one swipe back.
The fact that there is a specific way to swipe back from html pages suggests that there might be an equally specific way to swipe back from pdf pages. I am still experimenting. Meanwhile make sure no one is sitting to your right in case your trackpad flies off during a gesture trial.

After updating to iOS 5, my Iphone 4 is not reading my SIM Card. I went to ATT and got a brand new SIM Card, and it still hasn't worked. Can you help??

After updating my iphone 4 to iOS 5, it refused to read my att SIM Card. I went to the Apple store (Lennox Mall, Atlanta Georgia) for help, they told me that it was an Att problem, and needed me to get a brand new Sim Card from Att. I went to Att and replaced my SIM Card to a new one. I later returned to the Apple store, but the phone still didn't work. The apple techs blamed the att network, and stated I needed to go home and wait for 24-48 hrs, and retry the att network again, and hopefully the phone will work. The next option they gave me was to pay $200.00 to get a replacement because my phone was out of warranty.
So I basically I have a phone which has never been dropped, not abused, no water damage or what so ever. Prior to my IOS 5 update, it worked perfectly without any problems. Now, that its not working as a result of either Apple's or Att's fault, no one seems to be helping or standing behing their product. Both parties are blaming each other for the problem. Can someone help??

I've seen a number of reports of this on here. In most cases where people took their phones in to the Apple store, they were given a replacement, even if the phone was out of warranty.

MOVED: Fastest overclock w MSI Neo2 Digital and AMD64 3000+ with OCZ 512 x 2 premier?

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=123284.0

You should give the full name of your MB in signature, I assume it's a K8N Neo2 Platinum. Same thing for vid card, GTS without number doesn't say much (example of mine: 9600 GT). It's possible as you said to get it to 2.4 but some systems will OC better than others so you just have to go for it and see what you come up with. Keep an eye on CPU temp when attempting any OC.
Read what you can about OCing it and then if any more questions or have any problems post back here and we'll help the best we can.

Can i buy a spain itunes card and use it with a mexican account?

??

No, all iTunes gift cards are country-specific - a Spanish gift card can only be redeemed and used in Spain on a Spanish iTunes account

HT4528 My phone will not allow me to update apps or purchase anything with my itunes card. It tells me that I need a valid card. I do not use a credit/debit card and only purchase with itunes cards.... what can I do for my phone to download?

I cannot download, purchase, or update any apps because it says my credit card is invalid; however, I only use iTunes cards.... how can I correct this problem?

To be exact the error says the iphone could not be restored, an unknown error occured (-1). What is that?

JCAP512 and JCAP6 conflict with concurrent database connectivity

So here is the situation:
Environment:
- We have a production JCAP6 appserver (AIX server 1) running a project pulling data from database A
- We have 4 JCAP512 domains on AIX Servers 2,3,4 running 4 distinct projects pulling data from server A
- All project run on a schedule of 5 minutes and login to the server with the same login
- Database A is SQL Server
- repository based code
Scenario:
- All 5 above processes run concurrently in the greater JCAPS environment.
- When all 5 processes are running, the JCAP6 process runs fine with no issue but at the same time the 4 JCAP512 processes hang on the database side waiting for a resultset with a wait status of ASYNC_NETWORK_IO
- As soon as the JCAP6 process completes, all 4 JCAP512 processes start running with no errors. Once the JCAP6 process starts again, same result.
- We shut off the JCAP6 process and all 4 JCAP512 processes run with no issue
So after my high-school proof setup above my question comes to what is going on??? All of these processes run on their own isolated physical and application servers. Their only commonaliy is the login to the database. Are there any known database connectivity settings that would limit user transactions if another (same) user connection currently exists?
Has anybody seen anything like this? Ay assistance would be greatly appreciated.
Bryan
Edited by: bgrant88 on Jan 29, 2010 2:15 PM

I've never worked with the old version of the toolkit, so I don't know how it did things, but looking inside the SQL prep VI, it only generates a command, and the the column name VI wants a recordset. I'm not super familiar with all the internals of ADO, but my understanding is that is standard - you only have the columns after you execute the command and get the recordset back. What you can apparently do here is insert the Execute Prepared SQL VI in the middle and that will return what you need.
I'm not sure why it worked before. Maybe the execute was hidden inside the prep VI or maybe you can get the column names out of the command object before execution. In general, I would recommend considering switching to the newer VIs.
Try to take over the world!

Play.this(); and compositionReady conflict with Edge Animate CC

I am designing a website and I have created animation with three images.
At the end of the last image, I am using the play.this()[; symbol to repeat the images that are being played.
When I go to create a composition ready function on the Stage, all triggers on the Timeline start working.
Is there a fix for this or am I doing something wrong?

You must have a code error. When there is an error the whole timeline plays to the end.

CSS backgroundImage and borderSkin conflict with ClassReference

I've spent several hours trying to figure this out. I have a programmatic skin that paints a gradient and sets it as a backgroundImage ClassReference in css. In that same stylesheet declaration I set the borderSkin to a ClassReference of a class that extends border and draws a line. A canvas is referencing the declaration. I'm confused because if I only use the background image style it draws the gradient. If I add the border skin style, it won't draw the gradient but draws the lines in the border skin. The interesting part is if I set breakpoints, I never even hit the breakpoint in the updateDisplayList method for my background image class, only the border class, so all I ever get is a line. Does the borderskin in css override other skins like backgroundImage? Are there documents that explain this somewhere on adobe's site?

I don't think any of those items would affect the behavior of that tabbed region. They are all pointing at some unprotected javascript on the page - ordinarily placing those bits of embedded script between CDATA lines will eliminate these validator complaints. If that were done, this page would probably validate.
As for the original question, I am not sure why the symptoms reported are occurring in IE. Perhaps someone else will spot the reason....

C6 and CC Conflict with deployment

Hi guys,
I currently have multiple users that have CS6 Installed on their macs. When I try to install CC on the computers, it fails. If the computer does not have CS6 already installed, CC installs with no issue. The reverse is the same, if a computer already has CC installed, CS6 installation fails.
CS6 and CC use two separate adobe ID's. Could this be causing the issue? Does anyone know the quickest way to consolidate two accounts?
Any help would be so wonderful.
Thank you

Obiwantrenobi I would recommend reviewing your installation logs to determine the cause of the installation failure. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.
It is likely you will discover a file permission error within your log files which is preventing a file or folder/directory from being updated after a previous Adobe installation has been made.

G4 AGP, problems with Graphic Cards and booting from Install DVD

I bought a G4 AGP (with DVD) on Ebay. It has Mac OS9.2 installed and its working correctly so far. It has an additional GraphicsCard in a PCI Slot, on which the Monitor is connected.
1. The AGP Card doesn't give any output signal... I wondered if this would be the reason that somebody installed the additional Card...
2. The AGP Card doens't show up in the Profiler... is this normal? According to other users this seems to be a common issue...
3. I would like to install X 10.4, but when booting from CD, the process stops after a few seconds... and there is no signal on none of the video cards. I tried to remove one or the other card but no luck...
the firmware is uptodate and the Install DVD is correct aswell, I just bought it from AppleStore...
I don't have any original CDs available, so I cant run a hardware test.
Anybody?
G4 AGP Mac OS 9.2.x

The AGP Card doesn't give any output signal... I wondered if this would be the reason that somebody installed the additional Card...
Probably. I'd take out the bad original card and replace it with the additional card. Then, check and see if that's what caused the problem. Then only other choice is to take it to the Apple store and have them check it out.
I don't have any original CDs available, so I cant run a hardware test.
You can either contact the seller and complain about the missing disks or buy replacement disks for your machine. Give 1-800-MY-APPLE a call. The AHT disk should cost about $20. I don't know what the others would run.

MOVED: Got NX8400GS TD-256E video card and it conflicts with onboard video

Similar Messages

Maybe you are looking for