MOVED: Got some newbie questions
This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=183925.0
Oh well I guess I have to try to figure out what these settings do myself. Seems to work roughly like I thought it would. Although not quite, Override 1,1v turns into 1,12v under load and Override 1,1v + offset 0,02 somehow turns into 1,136v close enough I guess.
Was just afraid I'd enter 1,1v and it would set the voltage to something entirely different. Seems to work roughly like you'd expect. Still don't know what would make the CPU run stable overclocked when idle, have to experiment I guess.
Seems setting the voltage to override and higher than the Auto: 1.05v makes the minimum voltage when idle slightly higher
Similar Messages
-
I'm just confused, I don't really overclock or mess around with my bios settings usually. Although I still want to get a bit more out of my CPU then what it normally delivers.
Got an i5-4670k, just tried to set the clock speed to 4.2Ghz nothing fancy. It ran fine for hours when gaming and running p95 at the same time, but once when I went afk and the CPU was idle it crashed. It drops the VCore to what to me seems rather silly values at times when idle, I mean 0.088V at 3.8Ghz?!? Perhaps CPU-Z is lying
Also it gets rather hot when running p95, at just 4.2Ghz it reached like 78c on hottest core, 74c on the others. (although I do have too hot in the room as well 25c). It also increased the Vcore to 1.304V which is probably kinda high.
I don't really understand the voltage settings, what would happen if one set them like in this pic below (don't worry I didn't save any of these settings). Would the 1.05V + offset be the VCore, 1.25V that is? And the minimum voltage increased by 0.2V? Would be nice to not have it use so high max voltages and not so low when idle that the PC crashes.
Any suggestions are welcome, I don't have a clue. What does Ring voltage mean, should you just leave that alone or set it same as Core voltage or what? Under DigitAll Power there is also something called Vdroop, can you avoid the CPU getting too little voltage by changing that? Or does that do something entirely different. I wish motherboards came with an indepth guide.Oh well I guess I have to try to figure out what these settings do myself. Seems to work roughly like I thought it would. Although not quite, Override 1,1v turns into 1,12v under load and Override 1,1v + offset 0,02 somehow turns into 1,136v close enough I guess.
Was just afraid I'd enter 1,1v and it would set the voltage to something entirely different. Seems to work roughly like you'd expect. Still don't know what would make the CPU run stable overclocked when idle, have to experiment I guess.
Seems setting the voltage to override and higher than the Auto: 1.05v makes the minimum voltage when idle slightly higher -
Trouble backing up Macbook (10.4.11) and some newbie questions...
I am using a MacBook OS X 10.4.11 and do not have Time Machine. I have a couple newbie questions...
What is the best way to back up everything? I am using Disk Utility's Restore tab but it is taking forever. I first tried to do it though Disk Utility's First Aid tab but it wouldn't let me make a New Image because the "source was in use", I think it is because I don't have the Install Disc to begin with (http://support.apple.com/kb/ht1553).
Secondly, does this include everything in "Home" (bookmarks, iPhoto library, iTunes library and so forth), Documents, and Desktop? Or must these be archived and transferred to the external hard drive separately from Macintosh HD?
Thanks in advance for any help!I tried restarting the phone and switching to another USB cable and now it is working so never mind.
-
dear all smart men, i am a newbie in xml domain, there are some quiestions that i can't make sense yet, anyone can help:
1. dose the xml is independent from protocals? we can bind xml to http and sock too, and something this kind of?
2. soap is called a "protocol", but in fact it's a kind of xml application with standard format. we all know that xml is used for describing data, and soap has this functionality too, but why soap is isolatable from common xml? what is its purpose?
3. jxta is a set of protocols used for p2p purpose. most of these protocols are also used in xml, but how they get their goals. For exmaple the ERP protocol in JXTA, it can route the routine the message transimited. but it seems the network protocol can achieve, how the xml can do this? (i have read some docs about this i can't make sense about it yet)
all above are some questions i met by now, for i am a newbie in this field, so i may have some misunderstading about xml/soap/jxta, if any pls feel free to critise, that i can step further =).
Thanx, and good luck to you all.Thanx Dodossot =)!
your answers are quite helpful really, now i feel the cloud dispersed already.
about the 3rd question, for you have answer the first and second, the third is not a problem now. what i need is to read more about JXTA protocols. if you are interested about them, you may find some docs at www.jxta.org for more inf.
at last i will say thanx again, and you don't hesitate to say you'r smart =).
best regards. -
Some "newb" questions - Network and BBM
Morning -
I have some questions, I'm hoping someone can answer.
Q1 - Presently the device (Curve 9300) is connecting to the router successfully but not connecting to the internet even though other devices are (the WiFi indicator is dim). Is there anything different you need to do on BB to get it to connect? If it makes a difference, I'd to state that I am currently using the handset without a BB data plan, but I thought connection to WiFi would still have been possible. Any assistance will be greatly appreciated.
Q2 - I will be getting a BB data plan activated shortly, and I have a BBM question. Providers all state that BBM and email are free once you have the BB data plan. Would this usually include when you are roaming as well?Check the below links -
How to connect to a Wi-Fi network using a BlackBerry smartphone
KB13299 How to use the Wi-Fi Diagnostics tool to troubleshoot Wi-Fi issues
KB29087 Unable to browse the Internet over a Wi-Fi connection on the BlackBerry smartphone
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
what would happen to my macbook pro system if i didn't upgrade my OS X to the latest one everytime apple releases new one?
will it get any bug or viruses or something strange?
thx,Installing a newer Operating System is not always an advantage. Newer OS's sometimes will not have all of the Apple applications that you may have been using and occasionally makes some third party applications obsolete.
As a general rule I suggest that if you have a 2010 MBP or earlier, stay with Snow Leopard 10. 6.8. It is the most efficient and stable OSs to date. If you have a 2011 MBP, Snow Leopard, Lion or Mt. Lion will operate satisfactorily on those MBPs. For 2012 MBPs, you will be restricted to Mt. Lion only since it is the OS that comes with the MBP.
To date there have been no viruses for MBPs for any of the OS's and there are security measures incorporated within the OS, thus no AV software is essential. Malware has been evident from time to time, but it requires user cooperation to install it. If something looks suspicious, don't install it and you should have a malware free OS.
Ciao. -
[urgent] some newbie questions about Sun application server
thank you for reading my post
1-what is equivalant folder in suna pplication server which act like Tomcat_home\webapps
its name -i think- is autodeploy folder
2-how i can mark a context as a "cross Context" cross context are acceable from outside web application context.Your first question:
drop your file under s1as_home/domains/domain1/autodeploy.
For cross-context, see you need to add the property in WEB-INF/sun-web.xml:
http://docs.sun.com/source/819-0217/dgdesc.html#wp135273
table Table A-120 sun-web-app Properties
Hope that help.
-- Jeanfrancois -
SGA Size for 8.1.7.4 32 bit? , some Interview Questions
Hi buddies,
I got some interview questions, might be simple for geeks in DBA. I am in need of answers. Could anyone help me.
Thanks,
Raaj
1) Does windows NT support direct I/O?
Answer: Choose one of the answers that apply
A: No, only AIO
B: Yes, depending on hardware.
C: Yes.
D: No.
2) Can you take a coldbackup from solaris and use it on windows NT?
Answer: Choose one of the answers that apply
A: Yes.
B: Yes if RMAN backup performed from NT server.
C: Yes, after running RMAN convert.
D: No.
3) All of the following will alter the number of checkpoints that occur in one hour on the database, except one. Which is it?
Answer: Choose one of the answers that apply
A: Decreasing tablespace size
B: Decreasing size of redo log members
C: Setting LOG_CHECKPOINT_INTERVAL greater than the size of the redo log file
D: Setting LOG_CHECKPOINT_TIMEOUT to zero
4) The DBA is attempting to back up the Oracle database control file. After
issuing the ALTER DATABASE BACKUP CONTROLFILE TO TRACE command, where can the DBA find the backup control file creation materials Oracle created for him or her ?
Answer: Choose one of the answers that apply
A: USER_DUMP_DEST
B: LOG_ARCHIVE_DEST
C: CORE_DUMP_DEST
D: BACKGROUND_DUMP_DEST
5) What is the most important action a DBA must perform after changing the database from NOARCHIVELOG TO ARCHIVELOG?
Answer: Choose one of the answers that apply
A: Shutdown normal and restart the database
B: Perform a full logical database backup
C: Perform a full offline database backup
D: Manually switch the log files
6) Which of the following choices lists an ALTER USER option that can be executed by the user herself or himself?
Answer: Choose one of the answers that apply
A: DEFAULT TABLESPACE
B: IDENTIFIED BY
C: TEMPORARY TABLESPACE
D: PROFILE
7) You need to view the initialization parameter settings for your Oracle
database. Which of the following choices does not identify a method
you can use to obtain values set for your initialization parameters?
Answer: Choose one of the answers that apply
A: Issue SELECT * FROM DBA_PARAMETERS; from SQL*Plus
B: Issue SELECT * FROM V$PARAMETER; from SQL*Plus
C: Issue SHOW PARAMETERS from Server Manager
D: Use OEM Instance Manager
8) As a result of a media failure, the current online redo log group is corrupted, the database crashes, as the current online group is inaccessible. Which type of incomplete recovery are you most likely to perform ?
Answer: Choose one of the answers that apply
A: Change-based
B: Time-based
C: Recovery using a backup control file
D: Cancel-based
9) User SNOW executes the following statement: SELECT * FROM EMP. This
statement executes successfully, and SNOW can see the output. Table
EMP is owned by user REED. What object would be required in order for
this scenario to happen ?
Answer: Choose one of the answers that apply
A: User SNOW would need the role to view table EMP.
B: User SNOW would need the privileges to view table EMP.
C: User SNOW would need a synonym for table EMP.
D: User SNOW would need the password for table EMP.
10) Which one of the following statements is true?
Answer: Choose one of the answers that apply
A: The request queue is common, and the response queue is different for all the dispatchers.
B: The request queue and response queue are different for all the dispatchers.
C: The request queue is different, and response queue is common for all the dispatchers.
D: The request queue and response queue are common for all the dispatchers.
11) What is the largest SGA size for 8.1.7.4 32 bit?
Answer: Choose one of the answers that apply
A: approximately 2GB
B: approximately 3.5GB
C: approximately 4GB
D: approximately 8GB
E: approximately 16GB
12) The DBA is about to perform some administrative tasks. Specifying the
OPTIMAL parameter has which of the following appropriate uses?
Answer: Choose one of the answers that apply
A: Limiting concurrent users
B: Limiting concurrent transactions
C: Limiting growth of rollback segments
D: Limiting growth of tables
13) If the DBA wants to find information about how often transactions are
wrapping transaction information between multiple rollback segment
extents, where would the DBA look to find that information?
Answer: Choose one of the answers that apply
A: DBA_ROLLBACK_SEGS
B: V$ROLLSTAT
C: V$ROLLNAME
D: DBA_SEGMENTS
14) You have 30 rollback segments in your database, for which
TRANSACTIONS_PER_ ROLLBACK_SEGMENT is set to 49 and
TRANSACTIONS is set to 1000. During periods of heavy usage, about how many rollback segments will be actively used by Oracle?
Answer: Choose one of the answers that apply
A: 50
B: 60
C: 20
D: 30
15) The DBA has a table created with the following statement:
CREATE TABLE EMPL
(EMPID NUMBER(10),
LASTNAME VARCHAR2(40),
RESUME LONG RAW);
The DBA attempts to issue the following statement:
ALTER TABLE EMPL
ADD ( PERF_APPRAISE LONG);
What happens?
Answer: Choose one of the answers that apply
A: The statement succeeds.
B: The statement succeeds, but column is added as VARCHAR2.
C: The statement fails.
D: The statement adds a disabled constraint.
16) The primary key of the EMP table has three columns, EMPID, LASTNAME,
and FIRSTNAME. You issue the following SELECT statement:
SELECT * FROM EMP WHERE LASTNAME = 'HARRIS' AND FIRSTNAME = 'BILLI'
AND EMPID = '5069493';
Where would you look to see if this query will use the index associated
with the primary key?
Answer: Choose one of the answers that apply
A: DBA_IND_COLUMNS
B: DBA_TAB_COLUMNS
C: DBA_INDEXES
D: DBA_CLU_COLUMNS
17) You are configuring your index to be stored in a tablespace. Which of the
following storage parameters are not appropriate for indexes?
Answer: Choose one of the answers that apply
A: OPTIMAL
B: INITIAL
C: PCTINCREASE
D: NEXT
18) You need to set up auditing in an order entry and product shipment
application so that when the ORDER_STATUS column in the ORDERS
table changes to SHIPPED, a record is placed in a special table associated
with a part of the application that gives sales representatives a daily list
of customers to call on a follow-up to make sure the customer is satisfied
with the order. Which of the following choices represents the best way
to perform this auditing?
Answer: Choose one of the answers that apply
A: Statement auditing
B: Object auditing
C: Audit by access
D: Value-based auditing
19) Information in the buffer cache is saved back to disk in each of the
following situations except one. In which situation does this not occur?
Answer: Choose one of the answers that apply
A: When a time-out occurs
B: When a log switch occurs
C: When the shared pool is flushed
D: When a checkpoint occurs
20) In order to allow remote administration of users and tablespaces on an Oracle database, which of the following types of files must exist in the database?
Answer: Choose one of the answers that apply
A: Password file
B: Initialization file
C: Datafile
D: Control file
E: Nothing, SYSDBA privileges are not required for these actions.
21) You are planning the storage requirements for your database. Which of the following is an effect of maintaining a high PCTFREE for a table?
Answer: Choose one of the answers that apply
A: Oracle will manage filling data blocks with new records more actively.
B: Oracle will manage filling data blocks with new records less actively.
C: Oracle will leave more space free in data blocks for existing records.
D: Oracle will leave less space free in data blocks for existing records.
22) You manage database access privileges with roles where possible.
You have granted the SELECT_MY_TABLE role to another role, called
EMP_DEVELOPER. To view information about other roles that may be
granted to EMP_DEVELOPER, which of the following dictionary views
are appropriate?
Answer: Choose one of the answers that apply
A: DBA_ROLE_PRIVS
B: DBA_TAB_PRIVS
C: USER_SYS_PRIVS
D: ROLE_ROLE_PRIVS
23) In order to set your SQL*Plus session so that your NLS_DATE_FORMAT
information is altered in a specific way every time you log into Oracle,
what method would be used?
Answer: Choose one of the answers that apply
A: Setting preferences in the appropriate menu option
B: Creating an appropriate LOGIN.SQL file
C: Issuing the ALTER USER statement
D: Issuing the ALTER TABLE statement
24) You create a sequence with the following statement:
CREATE SEQUENCE MY_SEQ
START WITH 394
INCREMENT BY 12
NOMINVALUE
NOMAXVALUE
NOCACHE
NOCYCLE;
Two users have already issued SQL statements to obtain NEXTVAL, and
four more have issued SQL statements to obtain CURRVAL. If you issue a
SQL statement to obtain the NEXTVAL, what will Oracle return?
Answer: Choose one of the answers that apply
A: 406
B: 418
C: 430
D: 4421.-
2.c
3.a
4.a
5.c
6.b
7.a
8.d
9.b
10.a -
11.a
12.c
13.b
14.d
15.c
16.a -
17.a
18.d
19.c
20.a
21. -
22.d
23.b
24.?
hope it helps u.
Thanks
Kuljeet -
Some quick questions before I purchase LE8..
Hi all,
I'm a longtime mac user and I just got into music production. I plan on mainly making Hip Hop beats and also record me playing bass on sampled tracks. I have already purchased an audio interface( PreSonus Firebox 6x10) and some monitors (KRK RP5's). I'm going to be purchasing LE8 and a MIDI keyboard soon, as well as a turntable for sampling vinyl sometime this week.
I got some quick questions though. If I'm loading samples off vinyl into the ESX24 sampler in LE8, what program can I use within LE8 to cut the desired parts of the sample? Then assign them to my MIDI keyboard or Akai MPD24.
I plan on hooking everything up to my 2.16ghz w/2MB Macbook and was wondering if it could withstand Logic. Also, will I need to update any drivers for the firebox? I remember reading problems about it working with Logic.
Any help would greatly be appreciated. If any Hip Hop heads here have any tips/ suggestions, lemme know!
Thanks,
JC
Message was edited by: sonofabassI'm not a big expert on audio recording, but other than the video card (which would not be a big factor for audio) you can't really upgrade it to much further than what you specified. You could increase the internal storage, but I've always been inclined to keep most of my personal files (things I am not actively working on now) on an external drive, and keep the OS, applications, and my current ongoing work on the internal drive, along with plenty of free space. I think that improves performance. If you did get the larger internal storage option, you might consider partitioning it into two volumes. You could keep your OS, apps, ongoing work, and that free space on one volume, and use the other volume for the long-term storage of your user files. Or maybe for your audio work, it is better to have a separate volume that is a dedicated +scratch space+, so if you had the larger internal drive, you can use that space more flexibly.
One other consideration is the CPU speed. There is really very little difference between 2.93 GHz and 3.06 GHz. It's about 4%, but in the real world, the performance difference is probably even less. So you could trade the $150 for the slightly faster speed and get the extra internal storage for $100, saving you $50.
Also, the online store has a page for clearance and refurbs (Special Deals). For example, this one is currently listed
http://store.apple.com/us/product/FB419LL/A?mco=MjE0NDk5Mw
It is the current gen iMac model. Note: Many of the items on the Special Deals section are previous generation Mac models (so keep that in mind if you look at other listings). My current iMac is a refurb. In my experience, the one Mac and two iPods I have purchased as refurbs have looked new. They just come in a plain brown box instead of the fancy retail packaging. The warranty is the same as new. -
HT5577 why i have some security question that i never seen before?
I tried to change my password on apple id and i got some security questions that i never seen before..what can i do in this case?please help me
Welcome to the Apple Community Helen.
If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
i recently found my ibook and decided to see if it would still turn on. it did but i got this flashing question mark, i did some research into this and found out that the hard drive is the cause. so i opened it up replaced the hard drive and closed it up, booted from the disc and crossed my fingers but it did not pick up the hard drive. i thought it might not have been installed properly, so i opened it up to check the connections to make shure they were secure and closed it back up but now it wont even boot from the disc. so dose anyone know whats wrong with it because i really don't just want throw it away if its a simple fix. please if anyone know i would greatly appreciate it.
<Re-Titled By Host>There often were more than one build of Apple computer per model number designation...
In the instance of iBook (white dualUSB) there appear to be two with number A-1007.
And both of these were 14-inch display models.
•iBook G3/800 14-Inch (32 VRAM - Tr) 800 MHz PowerPC 750fx (G3)
•iBook G3/900 14-Inch (Early 2003 - Op) 900 MHz PowerPC 750fx (G3)
•Apple iBook Specs (All iBook Technical Specs) for entire series - everymac:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
There are a few fairly good repair guides online, some on http://iFixit.com site.
Here's the link to the early iBook G3 series, includes color + white dualUSB.
If your iBook is a 14-inch G3 white dualUSB model that one is there, too:
•iBook G3 Repair guides - iFixit:
https://www.ifixit.com/Device/iBook_G3
Either of these may be able to run a system no later than OS X Tiger 10.4.11.
So a system install disc set could be used to troubleshoot, install, restore &
prepare a replacement hard drive for a new system.
Not certain what the issues are behind your situation, there may be more than
meets the eye. Some models of iBook were more prone to hardware problems
and as they age, fewer opportunities to affordably repair them exist.
Good luck in resolving the iBook G3 issues...! -
I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do
Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
i got a new ipad and went buy music on iTunes and in is telling me that this is a new device on this account and wants me to answer some security questions I dont remember setting thes up and dont know the answers how do i reset the security questions
Click here and search the article for '2 out of 3' without the quotes; this generally involves either a message being sent to your rescue email address or contacting the iTunes Store staff directly.
(74313) -
I put a $15 iTunes card and the money went in but every time I try to buy a game it tells me to answer some security questions and I for got the answers. What do I do?
Hi Dylain,
You can manage your Apple ID account here: https://appleid.apple.com/
Here's an article on how to reset those questions: http://support.apple.com/kb/HT5312
If you have problems, you can contact Apple Support here: http://www.apple.com/support/itunes/contact/
Hope this helps!
~Joe -
Some basic questions from a mac newbie
hi,
i have been using linux and windows all this while, and recently began using an apple too. have some simple questions here that i hope to get some answers for.
1. is there something similar to /etc/hosts in linux where i can add the IP address of a server? this is for me to use the 'ssh' command in the terminal
2. when i open up an application, say safari or chrome, i want the window to fill the entire screen automatically, instead of having to drag the bottom right of the window to fill the screen. how to configure that?
3. when i close an application by clicking on the 'x' at the top left, why is it that it still appears in the list when i press command+tab? to remove the application from the list, i have to right click on its icon on the dock, then click 'quit'. this is rather troublesome.
appreciate any help!1. is there something similar to /etc/hosts in linux where i can add the IP address of a server? this is for me to use the 'ssh' command in the terminal
The /etc/hosts file is there, but the /etc/ folder is hidden. You can use the Terminal (in /Applications/Utilities/) to access it via Unix, or could enter "open /etc" in the Terminal to open that folder in the Finder.
However, I'm not sure how this relates to ssh... I have not needed to modify that file, yet I can ssh all I need to. Are you trying to connect to your new Mac via ssh, or connect to other machines from the Mac via ssh?
2. when i open up an application, say safari or chrome, i want the window to fill the entire screen automatically, instead of having to drag the bottom right of the window to fill the screen. how to configure that?
Just drag the window out to full-screen and the browser should remember and open new windows at that size in the future. There are also some utilities (one called "Right Zoom" IIRC?) that will make the zoom button (green + button) behave more like the Windows zoom button.
3. when i close an application by clicking on the 'x' at the top left, why is it that it still appears in the list when i press command+tab?
Applications shouldn't quit just because you close their last window, unless the application's entire user interface is contained within that window. That is the case with ALL Windows apps, since there's no global menu bar, but only in some Mac apps. This is something that always ticked me off big-time with Windows... there have been times when I carelessly closed a window I didn't need anymore, but wanted to keep using the app, and then had to wait for it to load again. That won't happen on the Mac.
If this bothers you, just use the key combination command-Q to quit apps.
Maybe you are looking for
-
Photoshop CS3 crashes when opening an image
When I open an image by double clicking on it when Photoshop CS3 is either open or closed, it crashes. If Photoshop is open and I attempt to open an image by going to "file" then "open" is still crashes. If I go to "file" then "new" a new doc will op
-
I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor? Or as something else to implement it? My configuration for SLA monitor: sla monitor 123 type echo protoco
-
How do I link my google contacts if I can't get my gmail to connect through the exchange
My gmail account which was connected to the exchange and out of nowhere stop working saying that the server has failed. I have tried several things (deleting and resetting up, etc) and can't get it to work. I need to find a way to link my contacts ev
-
Oracle Alert: Access before and after update values of a table column
We have a requirement where a notification needs to be sent when 'END_DATE' attribute (column in a table X) is set, in an Oracle Applications form. I have defined an Event based Oracle Alert which fires 'On Update' of the table X. Could anyone please
-
Windows 7 Home Premium Peer-to-peer network over a switch
Sorry for asking such a basic question here. I am trying to setup a small office network. There are 5 computers all running Windows 7 Home Premium. Using a switch I want to connect all 5 together. I have a software package running on PC1, which will