Moved Graphics Don't Display In Flash Output

Following on from my previous post (re the problems I have
had following an upgrade from v4 to v6) in which I mentioned that
many of my graphics do not display in preview mode, even having
moved the project to my C drive and even though the images do
display in compiled .chm output, they still will not display in
preview mode or in compiled Flash output (have not yet tested
WebHelp).
However, this does not apply to all of the graphics in my
project - It would appear that the problem images are only those
which having opened the project in v6, I moved into a central
graphics folder (using the Project view).
Beforehand, all my images were scattered throughout the
project folders which made it a nightmare to manage so I decided to
move those which were not already located in my 'Images' folder,
into it!
Although the file moves seemed to work without any problems
and the code in the 'True Code' view points to the correct location
(and does not show any obvious differences between graphics which
do display in preview mode and those which don't) - all I get is a
box the size and shape of the graphic containing a small red cross!
Any suggstions gratefully received as always.
Ta much

In dealing with the various problems, did you take a copy of
the project and then open that using the HHP file after deleting
the CPD and XPJ files? Try that on a copy to see if it fixes the
problem. If it does, read my topic on Opening a Project to see if
any of the issues concern your project.
If that doesn't fix it, post back.

Similar Messages

  • Altered graphics don't display properly

    I am running Lookout 6.2 on a small panel pc.
    I am using custom graphics which up to now display properly. I needed to make a couple of changes to the graphic, which was done on another computer then the exiting graphic was replaced with the new one, using the same name.
    Lookout displays the graphic but with messed up colour (greens are reduced to shades of grey) and the image is fuzzy. Untouched graphics remain ok
    Solved!
    Go to Solution.

    Thanks Ryan
    The resolution and colour were all correct, so I had the graphic re-drafted and this time it worked.
    Yet another mystery

  • Graphics don't display in pdf?

    When I view pdf's on my iPad 2, sometimes the graphics are fine, but often there are blank areas where some of the graphics should be.
    I create the pdf's in Adobe Acrobat 8 Professional by printing to a file from a variety of applications (Word, PowerPoint, Publisher, and so on).
    Can anyone suggest settings I can use in Adobe that would make the graphics appear 100% of the time? Trial-and-error isn't working.
    As an aside, I don't want to open these documents in their original format (for example, using Keynote for PowerPoint documents or Numbers for Excel documents). I really need them to be pdfs.
    Thanks in advance for any ideas!

    Are the graphics that don't show up interactive elements?
    For example, when I create files and turn an image into a button, either in the original program or in Acrobat, and neglect to check the "Interactive Elements" box in the "Include" section of the export options before I export, those images will not show up at all on any computer, not just on the iPad.
    You may have tried this already but in the "Options" section of the export panel, under "Export Layers", select "All Layers". Maybe your applications put some of your images on layers that are not accessible to you but it doesn't seem obvious when you're working with them.
    I hope this helps.

  • Graphics don't display in Rich Text

    I'm in the process of migrating from MS Entourage to Mail. For a long time I've been placing screenshots in context within my text and it's worked well for all receivers. Yet now my recipients tell me the graphics are no longer in place, yet they look fine when I'm sending. I've tried by gifs and tiffs; neither works.
    Mail 2.1.3 (753.1). What am I missing?
    Kind regards,

    Mulder asked: What exactly are your recipients seeing, if not the images? Are you actually sending Rich Text email, or is it Plain Text with images attached? More details.
    I'm discussing a software coding problem with a colleague. I enter some text, drag in a screenshot, centre it. Continue with more text, drag in another screenshot. Make some text bold. And so forth. Clearly I'm in Rich Text, and the behaviour is very similar to HTML mode in Entourage.
    I send the eMail. My colleague tells me the text arrives with graphic attachments out of context, separated from the text. He sends me these remarks:
    "I tried to look at your screen shots, but none of my software (preview, photoshop, safari) will open them . The name says 'gif' but it says they are in 'tiff' format."
    I then convert the graphics to TIFF format, place them in context and resend the eMail. He tells me he again gets the same result, plain text files with separated attachments.
    This is most counter intuitive and frustrating.
    Kind regards,

  • Incredible email graphics won't display

    Occasionally I get emails with graphics in the email, rather than attachments.  The graphics don't display, so I have to open the email on my home PC to see them.  On my Droid, I went into email/menu/more/settings/send & receive to find my 'Mail size limit' was set at 5kb, so I changed it to No limit.  I forwarded the email from my PC (same ISP), however only a few of the graphics appeared, most did not.  My wife has the Droid X and we share the same email account, so she also got the email.  She can see all the graphics.  What gives?  We both have the same OS.

    the graphics in my emails are always in the body of the email? i never receive them as attachments? i get many emails with graphics and they always appear in the same manner as when i pull those same emails from my pc. i just checked my settings, but can't find anywhere to change anything that may affect how your emails show up on the device? sorry.

  • IE don't display JSP output. It pop up download dialong and open Dreamwea

    IE don't display JSP output. It pop up download dialong and open Dreamweaver.
    I dont' know why, but when run in Netscape is OK
    Anyone please help.

    Looks like your problem lies by the file associations, i.e. extension of your jsp file (.JSP) is associated in your operating system with DreamWeaver rather than with IE. If you are using Windows you should be able to change file associations, so that all web pages including JSP will be opened in your browser.

  • Hi, emoticons in incoming messages to my iPhone 5 don't display as graphics but as keystrokes. Can you help? Thanks

    I should have said that emoticons in incoming messages received using yahoo mail on my iPhone 5 don't display properly

    have you ever thought that the person sending the message to you is sending the emoticons as keystrokes or that emoticons selected in Yahoo mail do not translate as expected to an iphone or that embedded images like emoticons in emails do not come across as you might expect?

  • How to read .xml file from embedded .swf(flash output) in captivate

    I have been trying to read .xml file from the .swf (Flash output) that is embedded within the captivate file but no luck yet . Please if anyone got any clue on how get this thing done using Action script 3.0 then let me know. I am using Adobe Captivate 5.5 at present and Flash CS 5.5.
    I am well aware about how to read .xml file through action script 3.0 in flash but when insert the same flash in captivate and publish nothing comes in captivate output. I would higly appreciate if anyone could help me out with that.
    Here is is graphical demonstration of my query :
    Message was edited by: captainmkv

    Hi Captainmkv,
    Does the information in this post cover what you're trying to do: http://forums.adobe.com/message/5081928#5081928
    Tristan,

  • Previews don't display

    Aperture 3.2.2, MacBook Pro, 8 Gb ram. I keep my CR2 (Canon 60D) RAW photos in Aperture on an external usb 2 drive so my wife can view them from her "user" side of our computer. We are both "admin" users. I know the library can't be shared, so I turn Aperture off on my side before she logs into her user side to see the pics, and vice versa. Yesterday I uploaded some pics to Aperture from my user side and they all appeared as expected in the library. All thumbnails, and full size pics show up fine. When I turn Aperture off on my side, and login to my wife's user side to view the pics the thumbnails don't display in the browser. The pictures are represented by empty placeholders. If I double click on an empty (thumbnail) placeholder, the picture opens and can be seen and edited as usual. Upon closing the image, the thumbnails still don't show.
    When I upload images from my wife's user side, everything shows up fine on her side, as expected, thumbnails and all. But when I switch to my side, the thumbnails don't display, but double clicking on the empty thumbnail placeholder opens the image for viewing or editing. The problem files are all from a single day/event. Pictures shot on later date, but on the same SD card upload and display correctly on both user's sides.
    I have over 5,000 pictures in Aperture, and this is the first time this has happened, all the other pics show up fine as thumbnails on both user's sides.
    Any ideas about this?
    Peter

    >Sorry, but that is plain BS
    Let's try to be a bit less flamey, shall we?
    >For starters, in order to use the laptop's keyboard, the external monitor has to be way too high, or the laptop/keyboard way too low, since the darned laptop screen gets in the way.
    True, but when using an external monitor (in the office) I also have my external keyboard and mouse. The laptop is on the left and behind, sitting on a riser so the bottoms of both screens are at the same level. External display is on the right. Both angled slightly inward towards me. The laptop overhangs the front of the riser (and the external keyboard) so the display is not too far away.
    >Secondly, your scheme underscores the futility of using a laptop and takes away any portability advantage you may have had.
    I don't see that. The screen IS profiled, just not as well as the external screen. It's plenty adequate for sorting/filtering shoots and preliminary editing, with more serious color correction, output sharpening, et. handled when back at the office.
    >Third, you won't be generating much income doing photography or Photoshop work on a lousy laptop screen "in the islands", or at least not for long. You may have earned your vacation, but the laptop sure isn't going to "pay for it". You may permanently lose some clients instead.
    I'll have to tell my clients that one. I'm sure they'll find it worth a chuckle. True the last trip was mostly spent coding and working in Flash, and the more critical Photoshop work I did needed a modest tweak once I got back to the good monitor, but it was pretty close and easy to fix. Technically I suppose working on a trip doesn't mean the trip is paying for itself, but rather than bleeding twice (traveling AND not working for a week) I'm only bleeding once. And I happen to enjoy work, so it's not a vacation killer.
    > I stand by my fundamental aversion to laptops.
    And I by my attraction to them.

  • Some graphs don't display in OEM Grid Control 10gR5 (10.2.0.5)

    A number of the performance graphs (e.g. Top Activity) don't display i.e. there is nothing but if if you right-click in the empty area you get a small pull down with Print, Settings, About Adobde Flash 10.
    This has all happend after upgrading to 10.2.0.5. OMS and client environment is:
    Windows 2003 SP2 (32 bit), IE 6 with Flash ActiveX 10, Flash Player 10.
    Anyone got any ideas or anyone got it working fine.
    Thanks.

    Windows Server 2008 OEM 11g Performance graphs do not display.
    Click OEM Performance Tab and IE7 information bar displays message:
    "Your security setting do not allow websites to use ActiveX controls installed on your computer. This page may not display correctly."
    Workaround: Disable Internet Explorer Enhanced Security Configuration in Windows Server 2008
    Unlike with previous versions of Windows Server in which you could disable Internet Explorer Enhanced Security Configuration by removing the component in Add/Remove Programs, Windows Components
    the Windows Server 2008 implementation of Internet Explorer Enhanced Security Configuration is configured through Server Manager.
    Select the root of the Service Manager navigation pane, and under the Server Summary click Configure IE ESC, which is part of the Security Information section.
    A dialog box appears, letting Internet Explorer Enhanced Security Configuration be enabled/disable separately for normal users and administrators.
    See YouTube video:
    http://www.youtube.com/watch?v=OO3PPN1olHY

  • BPM Workspace can't display the flash movie with IE

    Hi
    We have the following problem, we have a BPM project with a flash screen, when we execute the project in the workspace of BPM studio we can see the Flash, but when we published the project in BPM Enterprise , the workspace can't display the flash movie, it just display the panel without buttons and fields. This happen just in Internet Explorer, in other browsers we can see the flash.
    Any idea or solution ??
    Thanks in advance

    Actually, I got it working now...
    It seems that I have to have all the files in the same folder
    as the page it displays on!
    Historically I would dump a standard flash clip (not a
    converted movie with buttons) into the /images folder.
    I tested this intitally in a /video folder (just to keep all
    the files in one place) which would display the clip but not the
    buttons but as soon as I moved the files in the same directory as
    the page itself (which is the main index.html) it worked fine!
    So if anyone does read this is there a reason for that as I
    would like to keep everything in separate folders!
    Cheers, J

  • Problems with Flash output using Safari

    Hi All,
    does anyone know the solution to getting the flash output to work with safari?  The project plays properly on Firefox and Chrome.  On safari, my custom menus come up just the same as on the DVD version of the project, but the flash videos do not play - just a grey screen.  Interestingly, the duration of the clips is set correctly in the player, it just doesn't start the video. The flash files play correctly when loaded directly into Adobe flash player, so I am assuming there is a compatibility issue with the generated XML files or index.html.  The code inside the index.html seems very old and refereences macromedia.com and a windows .CAB file.  I have shortened the file names and eliminated any offending characters (all are in the form "Chapter_1").
    Anyway, this is stopping me delivering a project on USB stick for a client - seems to be a common issue when searching the web, but no solutions.  Any assistance or ideas would be greatly appreciated.
    I have the full CC (2014), but still have Encore CS6 installed for DVD production.
    Regards,
    Mark

    I read the thread you mentioned and all others relating to this issue - seems to be a number of people having the same issue over the last 3 years, but none have posted a successful conclusion.  I did see the post about strange characters in file names causing issues in the XML - I did also look at this and change all my content file names to innocuous "Chapter_X" & etc.  The paths to the "Sources" directory are all relative and the project works correctly on Chrome and Firefox.  Just safari is not working.  Agree, it could be permissions, but I have checked all security settings and the Abobe Flash player (with is called up by the script to display the videos in the browser) is specifically permitted to "Allow Always" in the security settings.  I can't help thinking there is a problem with the generated XML that safari is not behaving correctly - it wouldnt be the first time that Apple doest things using their interpretation of a standard. 
    However, after all that, the generated code from Encore doesn't result in a working local project that I can send to a client and expect to work.

  • Why some sites don't display pictures on my IPod Touch?

    When I surf the web on my IPT(IPod Touch)some sites don't display pictures....Instead there is a kind of blue Lego cube with a question mark on it...
    Thanks,
    JF

    The most common cause is that the site uses Flash. Currently, the Touch doesnt' support Flash. If it's not Flash, it may be some other protocol or app that the Touch doesn't support.

  • High Resolution Photos Don't Display

    Hello,
    We have a fully patched Lync 2013 installation with a fully patched Exchange 2013 installation. We've moved all users to the Unified Contact Store, and have had all users upload high-res photos. I can test this via the URL like this:
    https://server/ews/Exchange.asmx/s/GetUserPhoto?email=[email protected]&size=HR648x648
    I can definitely see high-res photos. Unfortunately, Lync doesn't display them! We get the old, low res AD photos that are horrible. I have read through everything I can find to ensure high-res photos are enabled in Lync, but they just don't display.
    Any ideas on how to fix / troubleshoot this?
    Thanks!
    Nolan

    Hi, depends what constitutes everything you could find =)
    Can you confirm that the 'DisplayPhoto' attribute of your associated client policy is set to allow ALL photo's, and not just those from AD.
    Use the below from Lync Management shell to query the attribute status against your client policies.
    Get-CsClientPolicy | Select Identity, DisplayPhoto
    Kind regards
    Ben
    Blog:www.gecko-studio.co.uk/ 
    Twitter:
      LinkedIn:
      Facebook:
    Note: If you find a post informative, please mark it so using the arrow to the left. If it answers a question you've asked, please mark the thread as answered to aid others when they're looking for solutions to similar problems
    or queries.

  • IE does not display my flash movie

    Hello fellows, I am having a huge problem with MIE. It does
    not displays the flash object embed! Firefox works fine, but IE
    doesn't!
    Here are the codes:
    quote:
    Code made by me:
    <object width="757" height="153">
    <param name="movie" value="/script/top.swf"> <param
    name="quality" value=high>
    <param name="play" value=true> <param name="bgcolor"
    value=#0000000>
    <param name="wmode" value="transparent">
    <embed src="/script/top.swf" width="757" height="153"
    wmode="transparent">
    </embed>
    </object>
    The funny thing is that I use almost the same code to display
    another flash movie and it WORKS for the second!!! Why is that? The
    Firefox displays both of them fine.
    I tried a second code:
    quote:
    Code generated by Flash itself:
    <object
    classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" odebase="
    http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0"
    width="757" height="153" id="top" align="middle">
    <param name="allowScriptAccess" value="sameDomain" />
    <param name="movie" value="script/top.swf" />
    <param name="quality" value="high" />
    <param name="bgcolor" value="#000000" />
    <embed src="script/top.swf" quality="high"
    bgcolor="#000000" width="757" height="153" name="top"
    align="middle" allowScriptAccess="sameDomain"
    type="application/x-shockwave-flash" pluginspage="
    http://www.macromedia.com/go/getflashplayer">
    </embed>
    </object>
    When I use the code above it returns to me an error on line
    215, but my file has only 196 lines! And if I count the included
    javascript, the possible lines are commentaries. The Firefox works
    fine.
    What is wrong with IE?
    See ya!
    Augusto

    > <object width="757" height="153">
    All the essential stuff is missing form the <object>
    tag .. so it will fail
    on IE (firefox doesn't use the object tag)
    > odebase="
    http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#v
    "odebase"? should be "codebase"
    Use the tags generated by Flash when you publish to HTML and
    things should
    be fine. Don't try to do it yourself unless you are an expert
    (and even
    experts don't just typ in tags themselves .. they copy and
    paste from
    previous html they have that works)
    Jeckyl

Maybe you are looking for