MOVED: GTX570m Timeout detection and recovery [HELP please]

This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=156977.0

Similar Messages

Frequent Display Driver Timeout Detection and Recovery on T410 with Win 7 64

The registered system warning points to:
http://technet.microsoft.com/en-us/library/dd349439%28WS.10%29.aspx
which however is concerning Vista.
Every wakeup from standby dark screen results in this warning. When do you have a corrected graphic driver?

Hi,
Please download driver from this site, totally uninstall current driver then install the downloaded driver.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Error 25014 when trying to install Lenovo Thinkvantage Rescue and Recovery! Please help!

Hi there! I recently restored my laptop with a general copy of Windows 7 pro 64 bit. I had to redo all the drivers and software (of course). I had installed Rescue and Recovery before but had never used it. I tried to reinstall it today and it kicks back every time with the same error message (error 25014 code=6)! I had installed linux but deleted it and installed Windows again. I also have a 21gb partition not even being used ( i have no clue how to combine them). Any advice as to how to get it working will be appreciated! Thanks for your help in advance!
Solved!
Go to Solution.

Error 25014 rc=6 is error installing the RNR boot manager.
Provide some information:
(1)Did your machine ship from Lenovo, with Lenovo factory system? If so what operating system was installed? vista, windows 7 home, pro etc? This would install with 3 partitions: system_drv, Lenovo recovery, (C).
(2)you state: I recently restored my laptop with a general copy of Windows 7 pro 64 bit
Does this mean you DID not do a Lenovo factory restore, but actually installed a retail version of win7 pro?
I will assume win7 pro retail for now.
(3)you state: I had installed Rescue and Recovery before but had never used it.
Was this in the past, lets say, on a factory shipped Lenovo system?
(4)you state: had installed linux but deleted it and installed Windows again. I also have a 21gb partition not even being used
===
It appears to me, your HDD had a system on it. I see Ubuntu mentioned in your other posts. Your HDD had multiple parttions on it, including the 21GB partition. Then you decided to install a retail version of windows 7 pro.
During a install of retail windows, you have to pay close attention as to where it will install.
http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html
Note steps 7 and 8.
It appears you did the windows install ON TOP of existing HDD, with preexisting partitions.
===
Rc=6
The simple answer is RNR is already installed. Did you uninstall RNR before the install?
The complex answer:
When RNR install went to add its entries to boot manager,BCD (boot control data), it did NOT like the contents of the BCD, ie other entries parked in the BCD,ie, Linux. It expects to have 2 BCD slots used, windows and windows RE.
===
Give this some thought. See if it matches your situation.
==
I would erase the HDD via a standalone utility, then install win 7 pro retail, and all issues should clear up.
This Erase/delete can be done during windows install. see steps 7 and 8 above.

Macbook Pro Recovery Help please!!!

I have a Macbook pro i am trying to restore. I have been trying since i got up yesterday. I backed up all my stuff on an external drive, restarted, went into disk utilities, erased Macintosh HD, quit disk utilities, went into OS X Mavericks recovery. It downloaded all my stuff and it went to install. Got a huge Yellow triangle with a "!" in it. Said it couldn't install and to contact the software manufacturer. Tried it again many times, but to no avail. Restarted it and got a folder with a question mark in it, blinking over and over. Restarted again and it went into Internet recovery. Got stuck a few times, but finally downloaded. Now it starts up as Mountain Lion Recovery instead of mavericks. (Was shipped with ML) I have tried to download many times but it starts off as the download being 5H 30Min then gets to 2H 13M and then shoots up to 9H 59Min, then up to 12H 56Min. My internet is not that slow. My connection is (as of typing this) 4.91 Down and 0.68 Up. What just happened is i tried it again. Recovery download got until 2H 18Min and went back up to over 6H. I then quit it, and restarted. Reset the PRam and booted up. Now internet Recovery is my only option. I put in my WiFi password and now it has the loading bar that isn't moving, and shows no time limit. I have restored this same mac before on the same network and it restored without a problem. I do not have disks, nor do I have the OS on a flashdrive. I have googled for hours on end trying to find answers to no avail. Help please!

The nearest Apple Store is 6 hours away from me and it ran out of warranty a month ago (of course ) so i don't know what to do. Just checked my computer and i got the 5010F error. Yay..

JSP and Servlet - help please

Hello,
I am making this feedback for fun and a bit of learning too. I have an INDEX.JSP page, where the user selects the very first option. Depending upon the selected option he is moved another page PRODUCTFEEDBACK.JSP (so far I have completed this). Here as usual there are many fields to be filled in. As a spams protection i have done this;
I have a AdditionClass, which is a seperate class where two number are generated at random. This numbers are called by PRODUCTFEEDBACK.JSP. The user is then asked to perform the addition. The completed form is then sent to ProductFeedback servlet.
When I compile my PRODUCTFEEDBACK.JSP I get this error. Can you please tell whats wrong?
PRODUCTFEEDBACK.JSP
      *<td>Please help us to prevent Spams by performing this simple mathematical Calculation. We appreciate your effort </td>*
    *</tr>*
*</table>*
*<jsp:useBean id = "AddTest" class = "go.AdditionClass" />*
*<table width="53%" border="0" align="center">*
    *<tr>*
      *<td><div align="center">*
*<input name="textfield8" type="text" size="3" value ="<jsp:getProperty name="AddTest" property = "randNum1" />">*
* + *
*<input name="textfield9" type="text" size="3" value="<jsp:getProperty name="AddTest" property = "randNum2" />">*
* = *
*<input name="_total" type="text" size="5">*
      </div></td>
    </tr>
    <tr>
      <td> </td>
    </tr>
</table>
<br>
<table width="37%" height="23" border="0" align="center">
    <tr>
      <td width="33%"> </td>
      <td width="67%"><input type="submit" name="Submit" value="Click here to send us this form"></td>
AdditionalClass.java
* To change this template, choose Tools | Templates
* and open the template in the editor.
package go;
import java.util.Random;
* @author MAC
public class AdditionClass {
    Random generator = new Random();
    int randNum1; // First Random Number
    int randNum2; // Second Random Number
    public void SetNum1(){
        randNum1 = generator.nextInt(10); // Generate First Random Number
    public int getNum1(){
        return randNum1; //Return First Random Number
    public void SetNum2(){
        randNum2 = generator.nextInt(10); // Generate Second Random Number
    public int getNum2(){
        return randNum2; // Return Second Random Number
    // send the Random Numbers to ProductFeedback class
    public void productFeedbackRandNum1(){
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber1(randNum1);
    public void productFeedbackRandomNum2(){
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber2(randNum1);
}Erros that I am getting:
org.apache.jasper.JasperException: Cannot find any information on property 'randNum1' in a bean of type 'go.AdditionClass'
C:\Documents and Settings\MAC\My Documents\NetBeansProjects\FeedBack\nbproject\build-impl.xml:462: The following error occurred while executing this line:
C:\Documents and Settings\MAC\My Documents\NetBeansProjects\FeedBack\nbproject\build-impl.xml:440: Java returned: 1
BUILD FAILED (total time: 1 second)

Thank you for replying. I modified my Bean class then what is posted above, so thought to repost the code again and seek help. There seems to be no error now but it just dont generate any random numbers, All i get very time is 0. I am wondering, is my code generating 0 as random number, every time :-)
package go;
import java.util.Random;
public class AdditionBean {
    int randNum1; // First Random Number
    int randNum2; // Second Random Number
    public void generateRandomNum1(){
        Random generator = new Random();
        int num1 = generator.nextInt(10);
        SetRandNum1(num1);
        // Send num1 value to ProductFeedback.java
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber1(num1);
    } // End of generaeRandomNum1
    public void generateRandomNum2(){
        Random generator = new Random();
        generator = new Random();
        int num2 = generator.nextInt(10);
        SetRandNum2(num2);
        // Send num1 value to ProductFeedback.java
        ProductFeedback productfeedback = new ProductFeedback();
        productfeedback.randomNumber2(num2);
    } // End of generateRandomNum2
    public void SetRandNum1(int num1){
        randNum1 = num1;
    public int getRandNum1(){
        return randNum1; //Return First Random Number
    public void SetRandNum2(int num2){
        randNum2 = num2;
    public int getRandNum2(){
        return randNum2; // Return Second Random Number
}// End of classThank you,

After effects and photoshop ,,,help please

hi all
can anybody help please.
ive been making a short film with my son and putting some basic effects in, just for a laugh.
i noticed an effect on ADOBE TV that was done by Gareth Edwards in his movie MONSTERS which i thought would be good to try out in my film but i carnt get it right,,
here is the link to that effect... http://tv.adobe.com/watch/customer-stories-video-film-and-audio/monsters/
its the effect where he changes the menu board in a cafe to one of his infected area signs, he allso changes a few other signs.
in the video he say that he exports a still frame from after effects into photoshop and puts on his image {with a few tweaks her and there}, when hes got it ok in photoshop ,it some how updates in after effects??
can any please help ,thank you

It's a simplified explanation of the process. He left out explanations of motion tracking and perspective matching that were most certainly required for the shot being discussed.
If you are doing the same process to a static, locked off shot, with no foreground objects passing in front of your sign, it would be very possible to create a single frame in Photoshop and just layer it over your scene in AE. But once the camera moves, you will need to understand Motion Tracking. If objects pass in front of the replaced component, you will need to understand Masking.

Mail and password: Help please!!!

I have changed my password and on my iPhone and iPad there is no problem. However, on my iMac, 10.8.2 every time I put the computer to sleep and then wake it up again Mail tells me to verify my password. I press OK but it refuses to accept and I am forced to go to System Preferences, then mail where I press OK for the same password and the whole thing then works.
In Yahoo it works perfectly!
What is happening in Mail. I have deleted the account in preferences and set it up again but all to no avail.
Help please!!!

You might try the following steps:
Restart the device by holding down the on/off button until the power down slider appears.
Try entering your password in another location (i.e. when you are using a different wifi network)
Reset all settings (settings > general > reset), this resets some of your settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It does not remove any of your data.
Try signing out of iCloud and back in (only if find my phone is disabled)
If this doesn’t help your best option may be to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.

My iPod touch has no sound from music and videos help please

My iPod touch has no sound at all, help please guys.

- The restore from backup
- If still problem restore to factory defaults/new iPod.
- Last, make an appointment at the Genius Bar of an Apple store.

HT5622 After installing iTunes Match I have lots most of my iTunes songs and albums help please

After installing iTunes Match I have lost most of my songs and albums help?

iTunes Match on the computer will not change the library content. The iTunes Match 3 step process must complete on the computer based library before being associated with any IOS devices.
It is always important to make a secure backup of your Song files prior to these activities.

Stuck in Recovery - Help please

Just recieved ipod nano today.. connected to itunes (was fine), updated software (was fine). Now i connect my ipod to my PC and itunes displays
"iTunes has detected an iPod in recovery mode. You must Restore this iPod before it can be used with itunes."
Clicked ok then clicked restore.
After restoring ipod message is displayed.
"iPod has been restored to its factory settings. Please leave it connected and it will appear in itunes source bar."
- Ipod is Left connected -
itunes then displays the original message -
"iTunes has detected an iPod in recovery mode. You must Restore this iPod before it can be used with itunes."
It keeps going round in circles.
Any ideas????

Try assigning your iPod a different drive letter. This recurrent message about "iTunes has deteced an iPod..." could possibly be caused by Windows drive letter confusion.
Follow these instructions:
Log off of any other users on your computer (and disconnect any iPods that are currently connected to your computer, as well)
Then, put your iPod into Disk Mode, then follow these steps:
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left panel area.
4 - Now, with "Computer Management" and Control Panel windows opened, connect your iPod to the computer.
5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
For more details, see this article:
Windows confuses iPod drive letter / Changing drive letter
I hope that helps you.
-Kylene

I'm new to java and need help please(repost)

I have an assignment involves modifying a previous assignment. the code for the previous assigment is shown below.(it was required to be done as an applet this assigment can be an application or an applet) I'm trying to modify this code to read a text file (items.txt) that looks like this:
item # description price(this line does not appear in the text file)
001 shaving cream 400.00
999 razors 30.00
I need to load the item# and price from the text file into arrays(I have no clue how to use multi-dimensional arrays in java and would prefer not to)
I need to search the arrays based on the values entered by the user (item # and quantity) calculate the total for that item then create a new text file which has each line item for that order in the form:
item# quant price per item total(price per item*quant entered)
also also I need to be able to display the four items listed above after each loop as well as all the previous item number and quantities they selected until they indicate they don't want to select anymore.
I've been working on this for days and it seems like nothing I try works. My major problems are:
1. I have no idea how to read the text file and load those 2 items into their respective arrays
2. I can't seem to create a textfile that looks like text for the output file.
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.text.*;
import java.util.Locale;
public class arraySelection
    extends JApplet {
//Initialize the applet
private Container getContentPane=null;
public void init() {
       String string_item, string_quantity;
       String output = "";
       String description= "";
       int counter= 0;
       int itemNumber= 0;
       double quantity = 0 ;
       double tax_rate=.07;
       double total= 0, price= 0;
       double tax, subtotal;
       double Pretotal= 0;
       double priceArray[] = {1, .5, 3.65, 0.02, 0.09};
       String descriptionArray[] = {"salt", "pepper", "paprika", "garlic", "thyme"};
     // create number format for currency in US dollar format
     NumberFormat moneyFormat = NumberFormat.getCurrencyInstance( Locale.US );
     //format to have the total with two digits precision
     DecimalFormat twoDigits = new DecimalFormat("0.00");
     //Jtextarea to display results
     JTextArea outputArea = new JTextArea ();
     // get applet's content pane
      Container container = getContentPane ();
      //attach output area to container
      container.add(outputArea);
     //set the first row of text for the output area
    output += "Invoice\nItem#\tDescription\tQuant@Price\t Line Total" + "\n";
    do //begin loop structure obtain input from user
           // obtain item number from user
           string_item = JOptionPane.showInputDialog(
               "Please enter an item number 1, 2, 3, 4, or 5:");
           //obtain quantity of each item that user enter
           string_quantity = JOptionPane.showInputDialog("Enter the quantity:");
           // convert numbers from type String to Integer or Double
           itemNumber = Integer.parseInt(string_item);
           quantity = Double.parseDouble(string_quantity);
             switch (itemNumber) {//Determine input from user to assign price and description
                case 10: // user input item =10
                  price = priceArray[0];
                  description = descriptionArray[0];
                  break;
                case 20: // user input item =20
                  price = priceArray [1];
                  description = descriptionArray[1];
                  break;
                case 30: //user input item =30
                  price=priceArray[2];
                  description = descriptionArray[2];
                  break;
                case 40: //user input item =40
                  price=priceArray[3];
                  description = descriptionArray[3];
                  break;
                case 50: //user input item =50
                  price=priceArray[4];
                  description = descriptionArray[4];
                  break;
                default: // user input item is not on the list
                output += "Invalid value entered"+ "\n";
                price=0;
                description= "";
         //Calculates the total for each item number and stores it in subtotal
         subtotal = price * quantity;
         //display input from user
         output += itemNumber + "\t" + description + "\t\t"+ quantity + "@" +
                   moneyFormat.format( price) + "\t" + moneyFormat.format( subtotal) + "\n";
         //accumulates the overall subtotal for all items
         Pretotal = Pretotal + subtotal;
        //verifies that the user wants to stop entering data
        string_item = JOptionPane.showInputDialog(" Enter a positive integer to continue or 0 to stop. ");
        itemNumber = Integer.parseInt(string_item);
      // loop termination condition if user's input is 0 .It will end the loop
   } while ( itemNumber!= 0);
    tax = Pretotal * tax_rate; // calculate tax amount
    total = Pretotal + tax; //calculate total = subtotal + tax
    //appends data regarding the subtotal, tax, and total to the output area
    output += "\n" + "Order Subtotal" + "\t" + moneyFormat.format( Pretotal) +
              "\n" + "Tax" + "\t\t" + twoDigits.format( tax ) + "\n" + "Order Total" +
              "\t\t" + moneyFormat.format( total );
     //attaches the data in the output variable to the output area
     outputArea.setText( output );
} //end init
}// end applet InvoiceAny help or sugestions would be greatly appreaciated. I've been working on this for over a week and everything I try goes nowhere.

First answer: You shouldn't ask multiple questions in the same thread. Ask a specific question, with an appropriate subject line (optionally, assign the number of Dukes you are willing to give for the help). When question #1 is answered and question #2 arises, it's time for a new thread (don't forget to give out Dukes before moving on).
Second answer: I think you need a Transfer Object (http://java.sun.com/blueprints/patterns/TransferObject.html). It's whole purpose is to hold/transfer instance data where it is needed. Create a class something like this:
public class ItemTO
    private String _number;
    private String _description;
    private double _price;
    public ItemTO( String number, String description, double price )
        _number = number;
        _description = description;
        _price = price
    // Getter/Setter methods go here
}then, in the code where you read in the file do something like this:
BufferedReader input = null;
try
    input = new BufferedReader( new FileReader( "c:\\a.txt" ) );
    List items = new ArrayList();
    String line;
    String itemNumber;
    String itemDescription;
    double itemPrice;
    while ( (line = input.readLine() ) != null )
     System.out.println( line );
        itemNumber = // Parse it from line
        itemDescription // Parse it from line
        itemPrice = // Parse it from line
        items.add( new ItemTO( itemNumber, itemDescription, itemPrice ) );
catch ( FileNotFoundException fnfe )
    fnfe.printStackTrace();
catch ( IOException ioe )
    ioe.printStackTrace();
finally
    try
        if ( input != null )
            input.close();
    catch ( Exception e )
        e.printStackTrace();
}As for how to parse the line of the file, I'll leave that to you for now. Are the three values delimited with any special characters?
jbisotti

Adobe Programs: Conflicts and Networking help please

I don't know if this is the proper place to post but this is what I'm looking for. Any suggestions, thoughts or help would greatly be appreciated.
We are researching the possibility of using an outside IT Consultant for our computers and Adobe Software. Our IS team (about 10 people), while very good with networking PCs, are not familiar with Adobe software and how they interact with the hardware/computers and networks.
We have been struggling for a few years to get our machines to be at their best performance and efficiency, especially on large tradeshow graphics. We have had crashes and glitches since CS3, but we understand that their are many variables and they are not just Adobe product issues.
We are a large company but have only 3 designers. So we are trying to find our own help and do some of our own research on a resolution.
We are looking for someone who is PC mainly, but if you have a recommendation for anyone that networks macs also that would be great. We are currently on PCs with hopes of someday moving to macs.
If anyone knows of any business or independent contractor in the North Central Florida area please let me know.

We contacted Adobe but they said they can only give over the phone help and will not refer us to anyone.

Routes, gateways, and networks -- Help Please

Hi Linux gurus:
I have a problem that I know you will help me resolve...
I have two network cards in my Linux box.
1. public network:
10/100
192.168.1.102
default gw: 192.168.1.1
netmask: 255.255.255.0
I want this one routed to my router for internet/public use
2. private network 1000mpbs
192.168.2.181
default gw: none
netmask: 255.255.255.0
I don't want this one routed at all. It is used for backups, moving files, etc and is called by individual servers using /etc/hosts.
Now problem is that I can't get out and/or in to the box. It appears as though the default gateway on this system is 192.168.2.254. I set up the network via the gui and it appeared to be working, but alas it is not. It looks like things are only talking via the 192.168.2.X network, and that is not what I want...and from the outside world, nothing at all is talking to it.
Below is my ifconfig -a and my netstat -rn
Please help!
eth0 Link encap:Ethernet HWaddr 00:18:F3:E8:29:2A
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:193 Base address:0x8000
eth1 Link encap:Ethernet HWaddr 00:90:27:AC:7C:4D
inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5339 errors:0 dropped:0 overruns:0 frame:0
TX packets:1891 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:588251 (574.4 KiB) TX bytes:530473 (518.0 KiB)
eth2 Link encap:Ethernet HWaddr 00:0F:B5:43:16:D0
inet addr:192.168.2.181 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:300106 errors:0 dropped:0 overruns:0 frame:0
TX packets:617831 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:28009736 (26.7 MiB) TX bytes:585354764 (558.2 MiB)
Interrupt:217 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:816528 errors:0 dropped:0 overruns:0 frame:0
TX packets:816528 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:102034952 (97.3 MiB) TX bytes:102034952 (97.3 MiB)
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 192.168.2.254 0.0.0.0 UG 0 0 0 eth2

Ok...I did the following:
route add default gw 192.168.1.1 eth1
route delete default gw 192.168.2.254 eth2
I am able to get out to the outside world and it seems to work fine, but just curious:
1. How do I keep this from reverting again? (I could put this in my own script, but would rather not hack it, but do it right)
2. Are my routing tables below correct now (it works I understand, but want to ensure it is done correctly).
3. What is this route for (in the below table) and is it needed?
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
4. Since i'm relying on /etc/hosts files for the systems on the 192.168.2.X interface should there even be a route for this subnet?
updated routing table:
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

Ipad 4 stuck in recovery.Help Please

So I`ve got an iPad 4 decided to update to ios 7 and i got to recovery mode,now i cant even use my ipad cuz im stuck there and it says couldnt recover ipad error 3004 help me please im so mad

Please search the internet for steps to get ipad out of recovery mode and follow them accordingly,will solve your problem
Thank you

ITunes won't open after moving to external HD...HELP please

Needed more room on my Mac HD so I moved iTunes to an external disc. That freed up a lot more space however iTunes won't open! I get error #13014. I downloaded a new version(9.1) onto my Mac and that one won't open.
Can anyone help me with this?
thanks in advance!
I'm running 10.6.3, MacPro

I moved the app and Library; I ended up removed all iTunes stuff(except) Library and reinstalled it. It now starts fresh....transferred stuff over however......I can't sync my iPhone...it says there another Library already synced....how do I know which one, I have a few(my fault).
Can I get these cleaned up somehow?
thanks!

MOVED: GTX570m Timeout detection and recovery [HELP please]

Similar Messages

Maybe you are looking for