MOVED: GX620 problems after CPU upgrade + 1.0S bios request

This topic has been moved to GAMING Notebooks.
[current section is only related to custom modded BIOS/firmwares]
https://forum-en.msi.com/index.php?topic=254370.0

Quote from: chimico_988 on 16-April-15, 16:46:53
maybe they fix something, but insignificant.
I'm just giving my general opinion.
Maybe you're right, but you didn't face the serious problem doesn't mean that there is none.
Quote from: chimico_988 on 16-April-15, 16:46:53
Some time ago there was a user ( Svet ) that mod bios on request
I would be satisfy with the original version
but I can't/not allowed to contact Svet
He's board is still here, so I'm sure it's still possible to reach him.

Similar Messages

Stability problem after CPU upgrade

I just replaced a 2.93GHz celeron D with a 3.0GHz P4 (SL8JZ, prescott core, I believe stepping is G1), on a PM8M-V MOBO. Has 2Gb of Ultra memory. OS is win XP prof, sp1, sp2.
System boots to windows the shuts down with a blue screen, which is in and out to fast to read . What I have done so far is.
1. Mark the drive as dirty and rebooted. Chkdsk ran ok.
2. Boot to safe mode check device manager and system events in the MSC console nothing interesting there and device manager reports all is well with the new cpu.
3. Still in safe mode ran memtest, which failed after only 1.4% and continued to fail.
4. Cleared CMOS, posted and reset BIOS to optimized defaults.
5. System again booted, but again became unstable and shut down.
6. Flashed new bios w7104vms.220 (latest verion @ 2007). Windows behaved similarly after startup.
Not sure what to do next. I once had to up the dram voltage on a newer system, when overclocking a pentium D using PQI memory, before it would pass a memtest audit, but if I remember that system did not fail to a blue screen and if it did i managed to supress the memory. No pun intended.
I would appreciate any ideas or suggestions. At this point I am inclined to focus on hardware things like re-seating the memory, although I never removed it during the operation and the system had been stable for some time before this.

A nice list of specs would be good. Use my sig as an example.
Without much more system info, I am going to guess the memory is not compatible with the board. But i am not sure because I do not know the type of memory. Try using 1 stick of memory or upping the memory voltage 1 click at a time in the bios and see if that helps. Be carefull.

DataSource problems after BW upgrade

DataSource problems after BW upgrade
Upgrade from
SAP NetWeaver 2004s: SAP_BW 700 0012 SAPKW70012
to
SAP EHP 1 for SAP NetWeaver 7.0: SAP_BW 701 0007 SAPKW70107
BW system: PI_BASIS 7.01 SP 6
ECC/source system: PI_BASIS 2005_1_700 SP 11
Problem exists throughout, both with generic and standard DataSources.
Here is one specific example:
Generic DataSource ZXXXXXXXX
InfoPackage "ZXXXXXXXX(ZXXXXXXXX)" does not run. Error:
DataSource ZXXXXXXXX(SOURCESYS) must be activated
Message no. RSDS179
Then followed these steps:
1. Replicate Metadata from source system
2. Report RSDS_DATASOURCE_ACTIVATE_ALL from SE38 for source system SOURCESYS and DataSource ZXXXXXXXX
Errors returned:
Inconsistent user object ZXXXXXXXX SOURCESYS for PSA /BIC/B000XXXX
Error saving DataSource ZXXXXXXXX SOURCESYS
DataSource ZXXXXXXXX (SOURCESYS) could not be activated
When I try to choose "Manage" from the context menu for the DataSource, I see an error:
Invalid DataStore object name /BIC/B000XXXX: Reason: No valid entry in table RSTS
Message no. RSM1294
The following notes have not helped:
https://service.sap.com/sap/support/notes/1377274
https://service.sap.com/sap/support/notes/1383711
https://service.sap.com/sap/support/notes/1489064
https://service.sap.com/sap/support/notes/1056060
And no other SDN threads seem to give fruitful suggestions.
Any ideas?

Hi,
Just to help the folks out here.
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve (you reply was pretty accurate - but dint help me :-)).
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu.

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup.

I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

Check that your computer is compatible with Mountain Lion.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
MacBook Air (Late 2008 or newer) model number 2,1 or higher
Mac mini (Early 2009 or newer) model number 3,1 or higher
Mac Pro (Early 2008 or newer) model number 3,1 or higher
Xserve (Early 2009) model number 3,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable DVD/USB stick to install using this free program.
Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
Mavericks is supposed to be released this fall, so you may want to wait.

Blank screen after CPU upgrade for CQ60-119 series

Hi all.
The model:
I recently decide to upgrade my Compaq Presario CQ60-119TU purchased in 2008.
The upgrades:
My son will use it to play some games on it. Yes I know - it only has an integrated 4500M graphics chip - but this should be fine for Spore.
Apart from changing from 2 to 4Gb of Ram I will swap out the 250Gb to a 640Gb hard drive.The CPU is also being swapped out.
Existing CPU: Intel Celeron T1600 (1M Cache, 1.66 GHz, 667 MHz FSB)
Replacement CPU: Intel Core 2 Duo T9600 (6M Cache, 2.80 GHz, 1066 MHz FSB)
The laptop manual states this CPU as the best spec'ed replacement CPU I can put in the laptop.
Prior to this I upgraded to the lated bios which is F.65. All was working well with the T1600 at this time.
Problem:
After replacing the CPU and pressing the power button the laptop boots up briefly for a couple of seconds and then powers off for a couple of seconds. It reboots and stays on (CPU fan is running) but there is nothing on the screen at any time.
If I replace the old CPU and the machine boots up with the screen displaying text so video appears not to be the issue (well ...not broken at least)
Any suggestions on how to get this CPU to work or is the CPU defective? Thanks in advance.

Have a look here and you'll see that having the wrong mobo northbridge chipset (not compatible with the FSB of the processor) will cause the T9600 not to work. If you have the GL40 chipset forget trying to get this processor to work with your existing motherboard. If you have the GM45 chipset then your issue is probably something else.
Don't know what your chipset is? Download the free utiliy CPU-Z and run it.
FYI - The same model motherboard with the GM45 chipset is a 485219-001.

No output to HDMI (but ok to VGA...) after CPU upgrade

Hi there,
I have a very strange problem... hope you can help!
I wanted to upgrade my Mac Mini to use it as an HTPC, so I passed from 1.83Ghz CoreDuo/512Mb to 2.00Ghz Core2Duo/2Gb.
The CPU and RAM upgrade process went OK, so I tried to connect the Mini to my HDTV (TOSHIBA 37A3030D) via a DVI->HDMI cable, but the screen was blank.
I thought I had somehow damaged the digital video out of the Mini during the upgrade, so I tried to plug a 17" monitor with a VGA-VGA cable and a DVI-VGA adapter: no problem there.
Then I thought about a cable issue, but the very same cable works perfectly when I try it with my MacBook Pro, and in the same TV.
So I played a little with SwitchResX and finally resolved: after few tries and some reboots everything worked.
But then I noticed that CPU temperature was a little too high, so I decided to re-open my Mini and put a better thermal compound.
All went well, or so it seemed: in fact since this last intervention the CPU temperature went ok but I couldn't get HDMI output from my Mini any more!!
Output to VGA still works, tried with the monitor I mentioned before and with my TV's VGA input ... too bad I can't reach 1080i via VGA!.
I tried almost everything:
- Playing around with SwitchResX, with no luck this time...
- Resetting PRAM and NVRAM with various methods (the little button on the motherboard, CMD-OPT-P-RE during the boot, etc... )
- Resetting SMC
- Resetting firmware (keeping the power button pressed when turning on the machine 'till it beeps)
- Reinstalling Leopard
...no results.
The weird thing is that if I VNC to the mini I notice that the TV is correctly recognized (screenshot: http://www.matteo.ge.it/vnc_mini.jpg), and EDID data seems ok (link: http://www.matteo.ge.it/TOSHIBA-TV_macmini.txt)
Do you guys have any idea?
Thank you so much, I'm getting desperate

I tried to connect the mini to the TV just after the upgrade. After some tweaking with SwitchResX it worked. The problems began when i decided to re-open the mini to put some better termal compound over the CPU.
I agree with you, I have probably screwed up something during this operation, but I really can't say what!!! I tried both TechToolPro and the hardware tests from Tiger DVD, and all of the tests were ok...
I phoned to the Apple tech support here in italy, but they proposed me to change the entire logic board, which would cost me almost the price of a brand new machine!!
The ultimate test I want to do is to hook up my Mini to a DVI monitor with a DVI-D cable.
If it doesn't work, It is almost certain that I have damaged digital video out (even if I would like to know how I could did that!!)

Hard disk problems after full upgrade [SOLVED]

After a full upgrage (pacman -Suy) last monday, My system denied to boot:D:D:D:D:D.
So to fix it I have to go to /boot/grub/menu.list and change from hda3 to sda3. Everything seems to be Ok but when the system is booting and scan the the hard disk to check bad, It drops me to the shell with the error that there is something wrong with my hard disk and it suggest me to set the superblock to 8139.
So to fix it I boot my PC from Arch live CD, use the following command:
#fsck.ext3 -c -f /dev/sda3
#fsck.ext3 -b 8139
Everything seems to be Ok, there is no bad in my hard disk.
When I boot my system again, I got the same error again, I came back to live CD, check the hard disk, set the superblock as It told me and again, I got the error when I boot from the hard disk.
This is the second PC with the same error.
Three months ago, I upgraded my Server and got exactly the same problem. Because this is the server, I need it run ASAP, so I modified the rc.sysinit script so that the system will not check my hard disk when It boots. :P:P. And my Server can run without any problems since then.
I don't have time much to spend on this error and my PC is in the Lab now so I can't provide the detail of the error until next Monday. Sorry for that.
Any idea how to fix this error?
Cheers.
Last edited by hungsonbk (2008-06-25 10:26:35)

tigrmesh wrote:Did you review and merge any .pacnew files after the upgrade?
:D:D I am a kind of lazy guy so when I did pacman -Suy, I just leave it running without reading information on the terminal.
milan wrote:I guess you didn't change entries in /etc/fstab (hda->sda).
Yes, you are right. I changed from hda to sda in /boot/grub/menu.lst but I forgot to do the same in /etc/fstab files. On Monday I will check again if it is set correctly or not
:D:D. I have just taken a quick look into the fstab file in my Server, The One with the same problem three months ago, and the fstab file is set correctly with sda partitions. I don't want to touch this server again or my services will be down. So this seems not the correct solution, but anyway, I will take a look at it next week.
Thanks for your replies.

Satellite M40x will not boot up after CPU upgrade test

I have an M40x Laptop. I took the CPU out of it to replace it with another to test the computer booted up fine so I shut down and took it out and put it's original CPU back in, and it would not boot. Now it will not boot up at all with either of the CPU's all. When I turn on the power all I get is a white screen for a few seconds and the laptop shuts itself back down. Both the CPU's are good because I have since tested them in other computers to make sure that was not the problem.
Anyone have any ideas on what is causing this??

Im not surprised.
As far as I know Toshiba does not support any CPU upgrades and it's not advisable to do something like that.
Its a fact that the CPU replacement on the notebooks is not easy and mostly not recommended.
The processors used in portables are connected to the system board using a process called TCP (Tape Carrier Package). This is a permanent connection method and is used in the interests of miniaturization and heat dissipation.
Did you assign the new heat paste? Its necessary and important if you want to connect the CPU again.
So possibly this is a reason for the no booting.
I think more details you will get from the service guys in your country

External monitor problem after Lion upgrade

Hi,
I have a 20" iMac which has a screen resolution of 1680x1050(ATI Radeon HD 2600 Pro 256 MB). I have been using an additional 168x1050 monitor(Dell 2009W) in dual screen mode. This was working fine with Leopard, Snow Leopard, but it does not work after I upgraded to Lion. The screen appears to look fine for a few seconds then blanks out for a second and repeats. The only way I can use my extra monitor is by reducing the resolution to 1360x768.
Does anyone know of a fix or if apple is working on a fix. I called apple support, but all of their suggestion (fix disk permisions, reset PRam) did not help.
Thanks for any help.
Paul

Similar problem here with a 15" MacBook Pro purchased in late 2009. Connected to a new Dell ST2210 21.5" display via a DVI cable and Apple's mini display port to single link dvi adapter. The cable is dual link but seems to work fine the majority of the time.
When I wake my mac from sleep 1 time out of 3 I see black and white static on my external screen that only goes away when I unplug the screen or power it up and down.
I've tested another older MacBook Pro with the screen and everything works fine and when I connect with a different dvi cable I get the same issue.
When I called Apple support, they said it was a software issue and directed me to remove some .plist files in my library. I did what they said on the phone and it seemed to work for maybe 6 sleep cycles but the issue came back again. Since then I've reset the VRAM following their directions in a support article on the subject of external display static. (http://support.apple.com/kb/TS2377)
Does anyone know of a way to fix this or if Apple is actually listening? VGA works fine but I hate the quality of VGA compared to DVI. Should I look into getting an mini display port to dvi adapter from someone other than Apple?
It's annoying to have purchased a perfectly Mac compatible monitor which you really need, just to discover that Apple is having trouble with their mini display port...
Here's another guy with a similar issue and the same monitor (http://en.community.dell.com/support-forums/peripherals/f/3529/t/19330464.aspx#1 9691738). However, from the research I've done, his conclusion about it being the monitor seems to be false, especially with all the complaints here about similar issues regardless of display model.
I need an answer that does not include going back to VGA. What are your suggestions? I do have HDMI but would rather not shell out the money for a cable and adapter...

E52 Font Problem after software upgrade

Hello!
I have a little problem after upgrading my Noki E52 with the newest software version. All fonts are large, even if i set them to be small in display settings. So, my question is if there is a solution of this problem?
Thanks in advance!

i afraid to upgrade.. so many problems with new update.. hmm...
i don't have any idea but gl to find solve!

[NEARLY SOLVED] font rendering in gtk apps problem after last upgrade

Im' using KDE, cairo-lcd, libxft-lcd... my fonts looked beautifully, but now they look horrible...
After last upgrade my gtk apps (firefox, thunderbird) render fonts in an ugly way...
I've tried to revert to pango 1.16.5 with no lucky result (the same problem)...
here is the log:
[2007-08-19 14:56] upgraded bind (9.4.1_P1-2 -> 9.4.1_P1-3)
[2007-08-19 14:56] upgraded glib2 (2.14.0-2 -> 2.14.0-3)
[2007-08-19 14:56] upgraded gnupg2 (2.0.5-1 -> 2.0.6-1)
[2007-08-19 14:57] upgraded gtk2 (2.10.14-2 -> 2.10.14-3)
[2007-08-19 14:57] upgraded kernel26ck (2.6.22.2.ck1-1 -> 2.6.22.3.ck1-1)
[2007-08-19 14:57] upgraded libdownload (1.1-1 -> 1.1-2)
[2007-08-19 14:57] upgraded libevent (1.3b-1 -> 1.3d-1)
[2007-08-19 14:57] upgraded libxtst (1.0.2-1 -> 1.0.3-1)
[2007-08-19 14:57] upgraded nvidia-ck (100.14.11-2 -> 100.14.11-3)
[2007-08-19 14:57] upgraded sip (4.6-1 -> 4.7-1)
[2007-08-19 14:57] upgraded pyqt (3.17.2-1 -> 3.17.3-1)
[2007-08-19 14:57] upgraded xf86-input-joystick (1.2.2-1 -> 1.2.3-1)
[2007-08-19 14:57] upgraded xorg-server-utils (1.0.4-1 -> 1.0.4-2)
[2007-08-19 14:57] upgraded xorg-utils (1.0.2-2 -> 1.0.2-4)
[2007-08-19 14:57] upgraded xorg-xdm (1.1.5-1 -> 1.1.6-1)
[2007-08-19 14:57] upgraded xterm (225-1 -> 229-1)
[2007-08-21 00:16] upgraded cpio (2.8-1 -> 2.9-1)
[2007-08-21 00:16] upgraded ed (0.5-3 -> 0.8-1)
[2007-08-21 00:16] upgraded initscripts (2007.08-1 -> 2007.08-2)
[2007-08-21 00:16] upgraded intltool (0.36.0-1 -> 0.36.1-1)
[2007-08-21 00:16] upgraded libarchive (2.2.5-1 -> 2.2.6-1)
[2007-08-21 00:16] upgraded man-pages (2.60-1 -> 2.64-1)
[2007-08-21 00:16] upgraded pciutils (2.2.4-2 -> 2.2.6-1)
[2007-08-21 00:16] upgraded readline (5.2-2 -> 5.2-3)
[2007-08-22 00:16] upgraded gdbm (1.8.3-3 -> 1.8.3-4)
[2007-08-22 00:17] upgraded kernel26 (2.6.22.3-1 -> 2.6.22.4-2)
[2007-08-22 00:17] upgraded lcms (1.16-1 -> 1.17-1)
[2007-08-22 00:17] upgraded libice (1.0.2-1 -> 1.0.4-1)
[2007-08-22 00:17] upgraded libxrender (0.9.2-1 -> 0.9.3-1)
[2007-08-22 00:17] upgraded procinfo (18-3 -> 19-1)
[2007-08-22 00:17] upgraded xorg-apps (1.0.2-4 -> 1.0.3-1)
[2007-08-22 23:49] upgraded kernel26 (2.6.22.4-2 -> 2.6.22.4-2.1)
[2007-08-22 23:49] upgraded librsvg (2.18.0-1 -> 2.18.1-1)
[2007-08-22 23:49] upgraded libxpm (3.5.6-1 -> 3.5.7-1)
[2007-08-22 23:49] upgraded libxaw (1.0.3-1 -> 1.0.4-1)
[2007-08-22 23:49] upgraded makedev (3.8.3-1 -> 3.23-1)
[2007-08-22 23:49] upgraded mcpp (2.6-1 -> 2.6.4-1)
[2007-08-22 23:49] upgraded naim (0.11.8.2.1-1 -> 0.11.8.3.1-1)
[2007-08-22 23:49] upgraded nfs-utils (1.0.12-2 -> 1.0.12-3)
[2007-08-22 23:49] upgraded pam (0.81-4 -> 0.99.8.1-3.1)
[2007-08-22 23:49] upgraded pango (1.16.5-1 -> 1.18.0-1)
[2007-08-22 23:49] upgraded sox (13.0.0-1 -> 13.0.0-2)
[2007-08-22 23:49] upgraded xorg-apps (1.0.3-1 -> 1.0.3-2)
[2007-08-22 23:49] upgraded xtrans (1.0.3-1 -> 1.0.4-1)
[2007-08-25 15:25] upgraded glibc (2.6.1-1 -> 2.6.1-2)
[2007-08-25 15:25] upgraded bftpd (1.9-1 -> 2.0-1)
[2007-08-25 15:25] upgraded gcc (4.2.1-3 -> 4.2.1-3.1)
[2007-08-25 15:25] upgraded gtk-doc (1.8-2 -> 1.8-3)
[2007-08-25 15:25] upgraded hal-info (0.20070618-1 -> 0.20070725-1)
[2007-08-25 15:25] upgraded perl-xml-simple (2.16-2 -> 2.18-1)
[2007-08-25 15:25] upgraded icon-naming-utils (0.8.2-2 -> 0.8.5-1)
[2007-08-25 15:26] upgraded kernel26 (2.6.22.4-2.1 -> 2.6.22.5-1)
[2007-08-25 15:27] upgraded kernel26ck (2.6.22.3.ck1-1 -> 2.6.22.5.ck1-1)
[2007-08-25 15:27] upgraded libgnomeprint (2.18.0-1 -> 2.18.1-1)
[2007-08-25 22:41] removed libgnomeprintui (2.18.0-1)
[2007-08-25 22:41] removed libgnomeprint (2.18.1-1)
i dunno what happened...
plz, someone help me
regards
Last edited by saneone (2007-08-30 18:11:32)

Bogart wrote:
I think the spacing now is correct, while before it was wrong. The only "problem" is that you got used to a bad font rendering, and now that it has changed for better you feel like it's different and don't like it.
Really, *most* of the problems that people find in Linux's fonts are just because they are used to the awful default fonts from Windows XP. Yes, people can even get used to those fonts and believe they're good!!! And when they see correct fonts in Linux they think they're bad...
What I would do is remove the MS TTF fonts. They work bad in Windows and worse in Linux. You should use Bitstream Vera or DejaVu if you want good quality fonts (especially in web pages).
But, then again, you might think that they look wrong just because you're not used to it... Oh, well...
What does correct font / correct spacing mean ?
IMO, that doesn't make any sense, because that's a totally subjective matter, like many other things in this world.
BTW, I love how fonts look in Windows, and I think that must be the only thing MS got right. Thus, I'm using ms fonts in linux, and a rendering as close as possible (no autohinting or antialiasing or subpixel rendering).
Similarly, I could find a woman beautiful that you would find ugly or just average. We are all different, and it's better that way

Smart Playlist problems after iTunes upgrade 10.6.1.7

Hi, I updated my version of iTunes to 10.6.1.7 and since then my smart playlists are not syncing to my iPhone properly. The selection of songs is scrambled, and so I have a variety of my top rated, audiobooks and other random songs. I have tried removing and resyncing the smart playlists to my iphone, but this has the same outcome. Also, the sync doesn't complete all stages so I end up with roughly half of my music from my smart playlist on my iPhone.
Not sure if this is an iTunes problem or iPhone problem, but it definitely only started after I upgraded iTunes.
Any others out there with the same issue or any suggestions?

Yepper.. got the same issue.. it is not sync'ing my Itunes play lists to my I pod touch.

Odd Problems After Leopard Upgrade

I upgraded to Leopard a couple of weeks ago. All seemed fine until I began to notice a few odd things.....
1. Disk Permissions - If I select 'Verify/Repair Permissions' the disk utility began with the blue hatched bar and just stayed like that. I upgraded to 10.5.1 and now it progresses to the solid blue progress bar and says 'one minute remaining' but it makes no further progress. Same happens if I select 'Verify Disk'
2. No volume icon in the menu bar. It was there after the upgrade to 10.5 but yesterday I pressed the 'mute' button and the volume icon disappeared - it's been missing ever since and now I'v no volume.
3. MS Office 2002. I can see MS Office files - I can even preview them, but if I attempt to open them nothing happens. If I attempt to open the relevant MS app the icon just bounces once in the dock and then nothing.
It's worth noting that there are two users on my PB (both have admin status) but problem 3 only occurs in my user profile.
The other user is my wife and she's not the sort to mess with the computer - she just uses it.
can anyone shed any light on this as I'm seriously (and reluctantly) considering downgrading to Tiger.
Thanks in advance,
Seán.

Yo dude!
I think it's time to boot from the start-up dvd, run disk utility repair (always before an upgrade!), re-install (keep previous install just in case), restart, run all updates. Maybe if you have old software, it's time to un-install them and re-stall one by one until something untoward happens. I've been using Leopard on three macs without hitches.. I find it very stable. Current version is 10.5.2, quite soon since last update, so they're (apple) obviously fixing a few things. The only problem I had after upgrading to Leopard was some apps wouldn't hide (command-H) even from the menu, but sorted that by re-installing them after the leopard upgrade,.... hunky dory now.
Don't panic, there is always something silly causing bad **** to happen, 95% of the time it's software..
See you on Wednesday dude...... I'll bring up those disks I borrowed from you.....
dezzzzzzzzzz

8330 - Problem after OS upgrade

Hi All -
I recently upgraded the OS on the unit to V 4.5.0.175. A back up was created prior to the upgrade. After the upgrade, the note pad, task list and brickbreaker were deleted. They are not on the desktop or 'hidden' on the unit. In addition, the unit now makes a chirping sound when on a phone call. The Verizon has unable to help solve the problems. I have tried to download the updgrade to the desktop software from the verizon link in the hopes the missing apps would be included but have been unsuccessful. The download freezes at various points whether I am running it or trying to save it and is the only site/download I am having trouble with.
Any insights or suggestions to resolve these problems would be greatly appreciated. I would be happy to reverse the upgrade of the OS if that would solve the problems but do not know what the original version, where to get it or the best way to do it.
HELP - I need access to the info in the memo pad!!!
Thanks!!

Here's a thread about this issue:
http://community.vzw.com/t5/BlackBerry-Devices/High-pitched-sound-beep-while-on-calls-on-BB-Curve-8330/m-p/168979#M13338
StreetDoc found a solution....and if you PM him I'm sure he'll be more than happy to help you out.

MOVED: GX620 problems after CPU upgrade + 1.0S bios request

Similar Messages

Maybe you are looking for