MOVED: How do I make a raid driver floppy for Vista?
This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=107538.0
I found this txt in the drivers directory: "Please copy all the directories and files in the "floppy" folder to the root directory of a foppy disk
to create a pre-install disk for Win2K/WinXP/Win2003/WinXP 64bits/Win2003 64bits
the total size of the file is around 70kb
no need for disk spanning
Similar Messages
-
I have just bought a Segate 2TB goflex free agent drive with firewire 800. Could I use it as RAID drive ? If so , how could I format as RAID Drive. Please reply at earliest possible.
RAID over FW800 is slower than what your drive can do.
If you want RAID, then go SATA only, with controller and native cases.
My advice, avoid most name brand (WD, LaCie, Seagate) external cases. -
Hey everyone
So i followed Rsheppicks guide for multiple drive arrays and it seemed to work. I got to the point where i had to hit F6 and put in the nvidia raid driver floppy disk in. THen i hit S and it told me to put in the manufacturer supplied ardware support disk in. I put the floppy in and hit enter. However for some reason it wont read the floppy no matter how much i try. ive had this filoppy drive for about a year and it has always worked before. So i dont know whether the floppy drive/mobo combo is one of those unfortunate ones or perhaps the floppy is bad?....i dont know. BTW the floppy drive is that Sony MPF 920 or whatever
thanks
MSI K8N Neo Platinum
AMD Athlon 64 3200+ Newcastle +CoolerMaster Hyper 6
1GB Corsair XMS PC3200
1x 36.7 GB WD Raptor
2x 160 GB WD SATA RAID 0
Antec Tue 550 +12v@30A
Lite-On 16x DVD-ROM
Lite-On 8X DVD-RW Dual Layer
MSI GF4 Ti4200 8X 128MB
SB Audigy 2
2x IOSS RD7-CA Cooling After UnitsIs the avtivity light on the floppy on all the time? If so, you hooked up your floppy drive backward... reverse the cable now. I did the same thing on my setup, the Sony drive I have will allow you to hookup the cable either way. If not, I also had a corrupt NVRaid floppy (took me awhile to figure out both were the problem), just download the correct installs from MSI's website here and make sure your floppy is connected properly... you should have no problems after that. Hope this helps, peace.
-
I got a new computer. How do I make this the primary pc for all of my apple devices?
I purchased a new pc. How do I make this the primary pc for iTunes and all of my apple devices? I need to know how to take all Itunes files off old pc and put on new pc. Also, disable old pc.
Backup your library using this User Tip.
The same tool can be used to backup other important user data.
Deauthorise the old computer
Restore the library into the music folder of your new profile. (Use the same tool as for the backup)
Install iTunes and sign in to your account.
tt2 -
How do I make my computer the primary for my iPhone 3G?
How do I make my computer the primary for my iPhone 3G? I am able to load music from my iTunes library but unable to delete music or create playlists on the phone from itunes. The computer I set the phone up with (primary) was destroyed.
There is no "main" or " primary" account.
Iphone, ipod touch, ipad will sycn with one and only one computer at a time. Syncing to another will indeed erase the current content from the device and replace with content from the new computer.
Copy everything from the old computer or your backup copy of the old computer, to the new one. -
How do I make a table of contents for a collection of six short stories that is after the legal page and NOT in the front on an unnumbered page?
When I first started I made a title page and then pasted in my first story from a .TXT file. After cleaning up I went back to the front a couple of empty lines ahead of the story and typed in the story title. Unlarged the font size and centered it, thenYou can't do that. This is what the Pages User Guide, downloadable from your Pages Help menu, says:
Creating and Updating a Table of Contents
Each table of contents (TOC) you create using a Word Processing template lists only the content that follows it, up until the next table of contents. If you want a master table of contents for the entire document, it must be the only table of contents, and it must be at the beginning of the document.
You can do it manually though. -
How do I make Pages the default program for .doc files?
How do I make Pages the default program for .doc files without having the need to change the default program for each individual.doc file?
Navigate to a .doc file.
Ctrl click the file
Choose Open with and then go down the list, past pages, to other
Navigate to pages
Before you click Open make sure you click the 'Always open with' check box.
You should be okay.
You can do a similar think by selecting the file, Choosing File-Get Info
Then open the Open With Disclosure triangle.
select pages and then click CHANGE ALL
Hope this hleps.
M. -
Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.
Neil from bristol wrote:
… How do you make an image … move across the screen …
by setting KEYFRAMES
(read, what FC/e's built-in Help-feature tells about it)
resize and set pic to start position
set keyframe
move playhead in timeline to desired length
set pic to end position
set keyframe … -
How can I make Adobe Reader 9 open for incoming PDFs instead of Acrobat 5.0?
How can I make Adobe Reader 9 open for incoming PDFs instead of Acrobat 5.0?
Hi,
Assuming that you have Reader 9.3.4 already installed on your machine, you can try the following to make Reader 9.3.4 as the default PDF opening application:
1. Right click on any PDF on your system and click on the "Open With" Option in the context menu that appears. In case you get another submenu, click on Chose Program in that menu. (In case you do not see any "Open With" option, then hold down the Shift key and right click on the file)
2. Click on Browse button in the dialog that appears, and select Reader 9. Make sure that you select the checkbox for "Always use the selected program to open this kind of file"
3. Click on OK.
This will make Adobe Reader 9 as the default viewer for all PDFs on your system. -
How can I make "No Proxy" the default for accessing the internet?
How can I make "No Proxy" the default for accessing the internet?
*Tools > Options > Advanced > Network : Connection > Settings
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can -
:confused2:am i mistaken :undecided:or, am i the only person that didnt get a RAID Driver floppy with their KT6V-LRS>>?
:cry:I have a new Hitachi SATA i'd love to install however...I have no RAID Driver to format it...lol
Does anyone have one they would be soooo kind to send me....or a link to DL the Proper Driver?
Thanks....
btw....i'm a n00b to sig's however .....this is what i have:
Processor:AMD XP 2500+ Barton FBS 333/Tt Aq.2
Operating System:XP Pro SP2 DX9c
MB: MSI-KT6V LRS
RAM: PC 3200@400MHz:1gig-2x512 Patriot Extreem
Video: Gainward Ultra/880FX5700 256mb, 3D default@425MHz/550MHz
IDE: Storage: Maxtor120gig 8mb Buffer@7200rpm/WD40gig@5400rpm 2mb Buffer
SATAStorage:(Not Yet Installd) Hitachi80gig 8mb Buffer@7200rpm
Optical Storage: Samsung CDRW 48x24x48 8mb Buffer/ LG CDRW/DVD 48x24x48x16 4mb Buffer
Input: Logitec MX1000 wireless Lazar mouse/Logitec wireless Itouch Kebord
Case: EnermaxV770, 1x 120mmEnermax, 3x 80mm Ventec Tornados, 2x 80mm Sunon Tonados
Moniter: POS 'cough' 'cough' I mean, Pritty HP17"viewable Flatscreen MX75
Audio: Creative Audigy Gammer/Altec 4.1/Altec headset
PSU: Power Tek ATX550D,Max output 550watts
+5v =40A
+12v =20A
+3.3v =28A
-5v =0.5A
-12v =0.8A
+5VSB =2A
sheesh...hope i got it all correct..lolthank you for your reply
:noidea:the fisrt download from the MSI link(VIA PIDE/SATA RAID Drivers & Utility), i have already dowloaded & tried all the files in the "RAID" folder (copied onto a floppy ofcorse & pressing "F6"ect ect) & i get an error "no text file something" not found ome.txt or something like that. then after continueing, it says the hard drive isnt there/pluged in & to press F3 to quit.
in every attempt i have made to find a proper diver has been futile
i honestly do apreciate your advise & efforts to help me.
thank you again
Processor:AMD XP 2500+ Barton FBS 333/Tt Aq.2
Operating System:XP Pro SP2 DX9c /VIA 4-1v453
MB: MSI-KT6V LRS
RAM: PC 3200@400MHz:1gig-2x512 Patriot Extreem
Video:Gainward Ultra/880FX5700 256mb, 3D default@425MHz/550MHzDriver71.40v
IDE: Storage: Maxtor120gig 8mb Buffer@7200rpm/WD40gig@5400rpm 2mb Buffer
SATAStorage:(Not Yet Installd) Hitachi80gig 8mb Buffer@7200rpm
Optical Storage: Samsung CDRW 48x24x48 8mb Buffer/ LG CDRW/DVD 48x24x48x16 4mb Buffer
Input: Logitec MX1000 wireless Lazar mouse/Logitec wireless Itouch Kebord
Case: EnermaxV770, 1x 120mmEnermax, 3x 80mm Ventec Tornados, 2x 80mm Sunon Tonados
Moniter: POS 'cough' 'cough' I mean, Pritty HP17"viewable Flatscreen MX75
Audio: Creative Audigy Gammer/Altec 4.1/Altec headset
PSU: Power Tek ATX550D,Max output 550watts
+5v =40A
+12v =20A
+3.3v =28A
-5v =0.5A
-12v =0.8A
+5VSB =2A -
Travel internationally and use my ipohne with wifi, how do I make sure to avoid charges for roaming but still use my internet and messaging on wifi? I have viber app and would like to message also without additional charges. Is there a setting I need to hit to ensure this?
Settings>General>Network>Roaming>Data Roaming>Off. If you really want to be absolutely certain, Settings>General>Network>Cellular Data>Off.
-
How do I make Photoshop 7 my default for viewing photos?
How do I make Photoshop 7 my default for viewing photos?
windows 7
Terry Keiser
<Removed by Moderator> -
How can i make Apple review a refund for a delaminated bottom case of my macbook november 2009 model? They more than implied that it is a design flaw anyway. They make it so hard to send a possible review of such.
http://www.apple.com/support/macbook-bottomcase/
-
In Cover Flow, a compilation album shows different covers for each song. How do I make it show one cover for the whole album?
Also in the first page of Get Info for all tracks set the Album Artist to be Various Artists.
If you select all the tracks and right click to get info then you can do all the tracks in one go
Maybe you are looking for
-
I downloaded Netflix from the App Store and it won't show up on my iPad and when I go into the store it says downloaded and open but it won't open. I tried deleting it and reinstalling it but I can't figure out how to uninstall it either. Please help
-
Error at phase 25 of Solution Manager 7.1
Hello all, Am installing Solution Manager 7.1 on RHEL 5.0. Database is orage 11g Iam facing an error at phase 25 i.e. "An error occurred while processing option SAP Solution Manager 7.1 > SAP Systems > Oracle > Central System > Central System( Last e
-
The MP Role, how many do you need?
On a previous post I was told that the MP role is random and your CM2012 clients can use any MP they find at random. If that is the case is the following scenarios fine to use? We have 1 CM2012 server that is a MP (plus many other roles) We have 6
-
I can't remember the passcode for my iPod touch, what should I do?
I lost my access code of my IpodTouch, what should I do
-
Use APEX_ITEM.SELECT_LIST_FROM_LOV on report
Hi All, I am trying to create a editable report. In this report, I have a few columns that allow users to update information. I have a problem to have my program return the current values of APEX_ITEM.SELECT_LIST_FROM_LOV in the specific ticked rows.