MOVED: How do i set the PCI-E Frequency on P45 Neo-F?

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=137087.0

Check it with Everest http://www.lavalys.com:8081/beta/everestultimate_build_1999_asoy5dkl1gx.zip
"Mainboard", "Chipset", then from right pane "South Bridge" and look below for Clock Generator

Similar Messages

How do i set the PCI-E Frequency on P45 Neo-F?

Hey guys, i'm been overclocking my system the last couple of weeks and i am getting instability with my graphics card.. i have a Core 2 Quad Q8400 processor, i read a tutorial that said to set the PCI-E Frequency manually to 100Mhz, but i can't find PCI-E Frequency anywhere in the BIOS set up of the P45 Neo-F board.
Could someone please direct me to where i might find it?
Thanks

Check it with Everest http://www.lavalys.com:8081/beta/everestultimate_build_1999_asoy5dkl1gx.zip
"Mainboard", "Chipset", then from right pane "South Bridge" and look below for Clock Generator

How is to set the input range of PCI-MIO-16E-1 (6070E) to be 0 to +5V?

How is to set the input range of PCI-MIO-16E-1 (6070E) to be 0 to +5V? Thank you very much.

Hi x2am,
Here is a link to a document about setting input range limits.
DAQ Input Limits
Hope this helps!
Jeremy L.
National Instruments
Jeremy L.
National Instruments

How do I set the master clock output frequency on the PCI-1424?

I want to use the master clock to generate the pixel clock to the imaging chip.

Hi,
We have tried everything to be able to set the Master Clock Frequency (please confirm pins 89 and 90 on the 100 pin connector). Everything we try including opening NI supplied camera files sets the Master clock to 40MHz.
You're code however does do something, the Master clock frequency is set to 5MHz when we open a camera file with your code included. All the attributes show up in MaX but changing the values from Max has no effect, and the frequency remains at 5MHz. We undertake an apply and snap after each change of value with no effect.
Am I missing something as the command OnBoardClock is supposed to be used to set the Master Clock Frequency, but you don't use that in your text at all. I would appreciate an explanation of the text yo
u use, if you have the time, as I cannot find any reference to how the software knows what "Frame Grabber Clock" is.
Thank you in advance for your help.
Andy

The default disk that itunes saves videos onto is full. How can I set the default to the other disk I have installed?

When adding a video onto iTunes I get the error message that my disk is full. I am aware of this. I have another disk(Actually same disk but it's split into two parts under computer). It has plenty of space(629 GB free). How do I set the disk that itunes downloads onto as the second disk?

Hi o0OZACO0o,
Thanks for visiting Apple Support Communities.
If you have iTunes set to organize your files, you'd need to make the other drive the default location of your iTunes library. See these articles for more information:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
iTunes: Understanding iTunes Media Organization
http://support.apple.com/kb/ht3847
Best Regards,
Jeremy

How do i set the size of 3d picture control

dear sir,
I have attached my vi.I have one doubt ie I have used translate object. vi in my vi to move my picture according to the value set by the y position.This y position indicates depth my object.this is sample object insteat of i am going to update my underwater vehicle.
What my problem is when i chnage the y value beyond 200 I can not see my picture.so how do i set the size of the 3d picture control size.
I have to see my picture within the 3d picture control eventhough i change the y value between 0-500,how do i solve my problem.
Another my doubt is how do i show the depth value (ie y value in translate object .vi) in 3d picture control ie while the picture is moving in a 3d picture control at the same time i want to display the corresponding depth rating in the 3d picture control
Pls anyone suggest me as soon as possible.
Thanks and regards
jayanthi.k
Attachments:
Untitled 1.llb ‏67 KB

Jayanth,
Take a look at the attached example. Alternatively, you can search for it in NI Example Finder by going to Help>>Find Examples in LabVIEW, click on the search tab, and search for meshes. I had difficulty reading your code, but I believe you need to position your lighting source in the optimal location to get better definition. And the example shows how to bind a color to the object.
Trey B
Applications Engineering
National Instruments
Attachments:
Using Meshes.vi ‏76 KB

How can i set the number of results that can be displayed on the page

hello im just wondering how i can set the numebr of results that can be dispaleyd on the jsp, when the there are more than 5 results i want the suer to press more
how is this odne could anyone send me a example code?
and also how can i get results from the query displayed as select list options, so that when they press one of teh results it goes to correspnding page
Thank you

Hi,
I assume that you have the connection to the DB.
You can try this code.
Statement stmt = con.createStatement();
String sql = "<some sql code for selecting>";
ResultSet rs = stmt.executeQuery(sql);
rs.last();
int count = rs.getRow(); // this is the number that shows how many numbers you have after select query
rs.first(); //we moved cursor again to the begining of the results.
if (count > 5) {
for (int i=0;i<5;i++) {
//as an example
rs.getString(0);
rs.getString(1);
rs.getString(2);
out.print("<a href='morePage.jsp'>More</a>");
else {
for (int i=0;i<count;i++){
//as an example
rs.getString(0);
rs.getString(1);
rs.getString(2);
rs.close();
stmt.close();I hope this would help you.
If you have problems let me know..
Ismail TURK

How u will set the external parameters like packet size and number

How u will set the external parameters like packet size and number of parallel process.

Dear Karthik,
ALE:
Use Transaction UPSC02 - ALE Distribution Unit: Packet Types.
Performance Optimization for ODS Objects:
To ensure a good ODS object loading performance, take the following into account:
 1. Creating SIDs
The creation of SIDs takes a long time and can be avoided in the following cases by:
 Not setting the indicator for BEx Reporting if you are using the ODS object only as a data store. If you do set this indicator, SIDs are created for all new characteristic values.
 If you use line items (for example, document number or time stamp) as characteristics in the ODS object, in the characteristic maintenance, indicate these as Attribute Only.
SIDs are created in parallel if parallel activation is switched on (see last point). They are then created with the same number of parallel processes as created for the activation.
However, if you specify a server group or a special server in customizing, these specifications are not only valid for the activation, but also for the SID creation. The creation of SIDs runs on the application server on which the batch job also runs.
 2. DB partitioning in active data tables (technical A table)
By partitioning by database level, you can delete data from the ODS object much more quickly. As a partitioning criterion, choose the characteristic by which you want to delete. For more information on partitioning database tables, see the database documentation (DBMS-CD). Partitioning is supported by the following databases: Oracle, DB2/390, Informix.
 3. Indexing
Use selection criteria for queries for ODS objects. If the key fields are specified, the existing primary index is used. The more frequently accessed characteristic should appear on the left-hand side.
If you did not specify the key fields completely in the selection criteria (visible in the SQL trace), you improve the run time of the query by creating additional indexes. You can create these secondary indexes in the ODS object maintenance.
 4. Activation of data in an ODS object
To improve system performance when activating data in the ODS object, you can make the following entries in Customizing under SAP Customizing Implementation Guide -> SAP NetWeaver -> Business Information Warehouse -> General BW Settings -> ODS Object Settings:
 the maximum number of parallel processes when activating data in the ODS object as when moving SIDs
 the minimum number of data records for each data package when activating data in the ODS object, meaning you define the size of the data packages that are activated
 the maximum wait time in seconds when activating data in the ODS object. This is the time when the main process (batch process) waits for the dialog process that is split before it classifies it as having failed.
 the server group that needs to be used when activating the data in ODS objects in parallel You have to create the server groups beforehand using the following path: Tools -> Administration -> Network -> RFC Destination, RFC -> RFC Groups. If you do not specify anything here, then the activation runs on the server on which the batch process was started for activation. If a server from the server group is not active, then the activation is cancelled.
 5. Loading unique data records
If you only load unique data records (meaning data records with nonrecurring key combinations) into the ODS object, then the loading performance is improved when you set the indicator Unique Data Records in the ODS object maintenance.
The records are then updated more quickly because the system no longer needs to check whether the record already exists. You do have to be sure that there duplicate records are definitely not being loaded, because this will lead to termination.
Regards,
Naveen.

How do I set the default time for calendar alerts?

How do I set the default time for calendar alerts? I always want to have an alert 15 minutes before my appointments. I don't want to have to manually set it each time I make an appointment (I just moved to iphone from a windows mobile where this was basic stuff so I apologise if this is a noob question).

I have the same issue. I've searched these forums and found lots of people who have asked this same question, but nobody who has received an answer.
About a year ago, I migrated from a Windows PC and a Blackberry (both of which had very simple default alert options) to a MacBook Pro and an iPhone and have yet to find a solution on this forum or from any of my Apple-savvy friends. Very discouraging.

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.
Or how does Premiere 11 determine where to set the image for the video it is exporting?
I already know how to use Freeze frame and save the image to my computer by Publish+Share/Computer/ Immage.
Thanks,
Mike

Mike
This is not Adobe. Rather user to user. We are all visitors here.
Just a bit of history....back in the days of Premiere Elements 4, you could set a "poster frame" in what was called the Project area. You did this by right clicking a blank area there and, from the drop down menu that appeared, selecting View/Preview Area, and using the poster frame feature there.
As I said, when a video imports into Premiere Elements, the thumbnail of the import has been presenting as the first frame of the video. With this Preview area "poster frame" option, you could set the video's thumbnail in the Project area so that the first frame was another frame in the video. But, this "perk" was restricted to thumbnails of the video in Project area.
If you exported to file with the first frame modified video, the export's thumbnail in Windows Explorer would present with other than the real first frame or the poster frame as the first frame.
Also, in more recent versions, I have observed that the export to file does not display the real first frame of the video in Windows Explorer. Seems random, but I have not kept track.
And, remember, at the onset I wrote
As far as I have ever seen, Premiere Elements Windows uses the first frame of the video for its thumbnail in the program.
I know of no way within Premiere Elements to control what the program opts to do in this matter. In some compatibility
issues, it opts to give no image but a generic one.
I did not say that you can expect to have the Premiere Elements' export file's thumbnail in Windows displaying with its real first frame. And, the more you get into this, depending on the versions, more details need to be added to my comment about "...first frame of video for its thumbnail in the program..."
I would have to look into all this further to get perspective on the contributing factors.
ATR
Add On...The Poster Frame feature appeared in versions 4, 7, 8, and 9 by my count.

How do you set the time period on IMAP email accounts (razr maxx)

Hi Guys -
Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
Your help is appreciated!
Best Wishes for the Holiday Season.
-Rich

Hey Rich. Once in 'settings,' there should be a "days to sync' under the 'data usage' section. You don't have that?

How i can set the selected item of a dropDown component from java code

Hi
Thank you for reading my post
How i can set the slected item of a DropDown component from backing beans java code ?
it is binded with a database , so one field determine its display and one other field determine its value , I want to set the selected item of this combobox
In back code i have both value and display values to use them .
can some one give me some help ?
Thanks ,

See code sample 3 at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
See also, the selection components row in the table under http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
It says
One way to preselect items is to call setSelectedValue(Object[]) or setSelectedValue(Object) from the prerender() method. You pass in the return values of the items that you want preselected. Be sure to verify that getSelected() returns null before setting the default options, or you will overwrite the user's selections on a post-back.

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How can I set the page that will open, when I open a new tab, to be the same as the homepage?

How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

How do I set the audience when I'm using Siri on my iPhone 5 to post to Facebook

How do I set the audience privacy for when I’m using Siri on my iPhone 5 to post to Facebook?
When I ask Siri to post a message to my Facebook Siri tells me what I have said and then asks tot post it, I then checked on my computer and the post is visible to "ME ONLY" I can change this on the computer and on my phone via the App but I do not want to be doing that all the time.
If I post to Facebook via Siri on my iPhone 5 I want it at the default setting of friends only.
So How do I change this?
I posted the first one 2 minutes ago then went into Facebook via the App and changed it but did a second one hoping that the default privacy had changed but it was again to me only. As you can see via the padlock. Please help. Thanks

What if you do need help or emergency situation while Posting FB via Siri is the fastest way to show you or someone is in danger, and he/she is dying because the post is Only visible to Me !?!?!?!???
Anyone who uses FaceBook to get immediate help for life threatening emergency is mercifully removing themselves from the gene pool.

MOVED: How do i set the PCI-E Frequency on P45 Neo-F?

Similar Messages

Maybe you are looking for