MOVED: How to use onboard VGA on 945GM2 with RX1300Pro graphics card plugged in?
This topic has been moved to Intel P4 & Celeron P4 based board.
https://forum-en.msi.com/index.php?topic=97199.0
Richard, 945GM2 doesn't have AGP bus anymore. It's PCIe.
However, it's a chipset "feature" that if you had a PCIe external display card hooked on, the chipset will disable the integrated graphics. There is no workaround.
Similar Messages
-
HP Pro 3130 MT Windows 7 How to use onboard VGA
There's got to be a simple solution to this. Our company recently took over another office and acquired several used PC's from them. Three of them are HP Pro 3130 MT workstations with Windows 7. These units have a built in VGA port and a DVI port. In addition they all have a separate video card installed, the HP 584217-001 ATI Radeon 4550.
I need these PC's to talk to "normal" VGA monitors, but since the onboard VGA will not work I presumed this was due to the ATI Radeon being installed and overriding the onboard VGA adapter. So, I removed the ATI Radeon card. Now the PC just beeps when it is booted. Still no VGA output. The HP 584217-001 also has a cable that converts it into two VGA ports. No luck when using this cable to connect with a VGA monitor, either.
How do I re-enable the onboard VGA adapter? I cannot see the BIOS as the display (VGA) will not work, so I can't make any BIOS setting changes. At this location there are no DVI capable monitors so I haven't tested whether or not the onboard DVI adapter is working.Just so everyone knows...
Please take note of the specific processor which is included with your HP Pro 3130 MT.
HP Pro 3130 MT motherboards with specific processors do not have any onboard (integrated) graphics, although they still have the VGA and DVI connectors. This means that although you may remove the PCIe Graphics Card, you will not be able to be able to use a monitor with the onboard VGA or DVI (because there is no integrated graphics). This also means that you will not be able change your bios to onboard graphics (because there is no integrated graphics).
"NOTE: HP Pro 3130 with Intel Core i5 750 processor or any Intel i7 processor has no integrated
graphics."(1)
(1) Source: http://h18000.www1.hp.com/products/quickspecs/13640_ca/13640_ca.PDF
If you would like to know why, let me know. Thanks!
-Dave -
Can i use a iMac from 2008 with broken graphic card as extra monitor
Can i use My Old iMac as a extra monitor. My Old iMac from early 2008 has a broken graphic card nvidia 8800 gs. When I start it up I hear the bong and see the symbol spinning then the screen goes black from right to left the computer is running but I can't use it. I assume it's the graphic card. Can I use this iMac as an extra monitor to my other iMac.?
No sorry.
-
I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie. Any ideas on how to get around this - how to revert to the previous version??
Look in your Applications folder. If your system behaved as expected, you should have an iMovie 9.0 folder in your Applications folder. Apple moved the old version there as even they suspected the new versions was a train wreck.
-
Does anyone kwow how to use the Korg M50 editor with garageband?
does anyone kwow how to use the Korg M50 editor with garageband?
Moved from the Creative Cloud to the Photoshop forum. They will be able to help you here.
-
How to use the same OC4j server with different port number
How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh GIn the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle -
How to use "Notes" on my iPad with my existing iCloud address?
How to use "Notes" on my iPad with my existing iCloud address? It asks me to create a new one...
Did I overlook some critical info here? I'm having the same problem described by Henry5, but I'm signed in to iCloud with my AppleID which is not the same as my Mobile Me/iCloud email. I keep being asked to create an account (which it won't allow me to do since the account already exists) but no where do I see an option to use the existing account. I also tried logging out with my AppleID account, and using the iCloud email, but that doesn't work.
I just want to sync my notes and mail... this is really irritating! -
Does anyone know how to use the earphones( plugs) that come with iPhones?
Mine is still fairly new and I am just learning how to use certain things.They're pretty straightforward. You plug them into the headset jack (the hole on the top left of your phone). You put the buds in your ears. All sounds, except for the phone ringing will now come through the earbuds.
-
How to use FM SO_DOCUMENT_REPOSITORY_MANAGER send mail with CC.
Dear Experts:
Please help me. How to use FM SO_DOCUMENT_REPOSITORY_MANAGER send mail with CC.
My Program code is as follow:
*Send the mail.
tb_receipients-recnam = 'BAITZ'.
tb_receipients-recesc = 'B'.
tb_receipients-sndex = 'X'.
tb_receipients-att_fix ='X' .
APPEND tb_receipients.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
EXPORTING
method = wa_method1
office_user = wa_owner
ref_document = wa_ref_document
new_parent = wa_new_parent
IMPORTING
authority = wa_authority
TABLES
objcont = tb_objcnt
objhead = tb_objhead
objpara = tb_objpara
objparb = tb_objparb
recipients = tb_receipients
attachments = tb_attachments
references = tb_references
files = tb_files
CHANGING
document = wa_document
header_data = wa_header.
endform. " send_mail
By the why, tb_receipients-recnam = 'BAITZ'. What's the meaning of 'BAITZ'? Thanks!you can use FM SO_NEW_DOCUMENT_SEND_API1
WA_RECV TYPE SOMLRECI1,
IT_RECV TYPE STANDARD TABLE OF SOMLRECI1.
wa_recv-receiver = 'TO email address'.
wa_recv-rec_type = 'U'.
wa_recv-com_type = 'INT'.
APPEND wa_recv TO it_recv.
CLEAR wa_recv."To Recipient
wa_recv-receiver = 'CC email address'.
wa_recv-rec_type = 'U'.
wa_recv-com_type = 'INT'.
wa_recv-copy = 'X'.
APPEND wa_recv TO it_recv.
CLEAR wa_recv. "CC Recipient
wa_recv-receiver = 'BCC email address'.
wa_recv-rec_type = 'U'.
wa_recv-com_type = 'INT'.
wa_recv-blind_copy = 'X'.
APPEND wa_recv TO it_recv.
CLEAR wa_recv. "BCC Recipient -
How to use the eventing and databag with a WAS 6.20 ?
How to use the eventing and databag with a WAS 6.20 ?
Is what there is a good guide for these services?
Thank'sIn the raise event you can pass the value
like below.
<SCRIPT>
function raiseEvt(value1){
if(window.document.domain == window.location.hostname){
if ( document.domain.indexOf(".") > 0 ) document.domain = document.domain.substr(document.domain.indexOf(".")+1);
EPCMPROXY.raiseEvent( "urn:com.sap:BWEvents","BWiViewevent", value1, null );
// alert('tree domain'+document.domain);
</SCRIPT>
and in the
subscribe event you can get the values like below.
<script language="javascript">
if(window.document.domain == window.location.hostname){
document.domain = document.domain.substring(document.domain.indexOf('.')+1);
EPCMPROXY.subscribeEvent("urn:com.sap:BWEvents","BWiViewevent", window, "myreceiveEvent");
function myreceiveEvent( eventObj ) {
document.forms[0].gp_hidden.value = eventObj.dataObject;
</script>
Also look at the following link for a complete documentation.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Enterprise%20Portal%20Client.pdf
Regards
Raja -
How to use warn about changes property with page menus
how to use warn about changes property with page menus
Hi,
If u will enable this property, then u will get warning message as a popup in case of change of state of VO.
Regards,,
Gyan -
ANyone know how to use an Apple keyboard A1359 with a MacBook Air?
Does anyone know how to use an Apple Keyboard A1359 with a MacBook Air?
I'm going to ask the hosts to move this to the macbook forum since you're more likely to get answers there than in the iPad one.
-
HT4623 How to use epson iprint after connected with iPad help
How to use epson iprint after connected with iPad help.
When you open Epson iPrint, you will see the various options of ways to proceed, e.g., Photos (to print photos), Maintenance (for printer maintenance). Scan (to perform scanning).
-
How to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud
how to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud
Get a vpn router.. I have no idea where you are in the world but you can find reasonable stuff for not too much money or even a general router that takes third party firmware like dd-wrt can run openvpn.
Set up the vpn router in place of the TC, as the main router in the network. Simply bridge the TC and place it behind the router. It will be accessible as part of the network via the vpn.
This is the only safe way to do it via windows.
http://www.dyncommunity.com/questions/18132/accessing-time-capsule-from-windows- 7-over-the-int.html
If you google around I have seen posts about how to access TC by port forwarding SMB on the TC.. using a different port.. To me this is going to slow down the hackers by a day or two.. then they will discover the open port and access your network.. not just the TC.. they now have SMB access to everything. Don't do it. There is very little security on SMB. -
how will i increase the shared memory of the graphic card of macbook pro 13-inch, early 2011 from 4gb memory?
The current version of Mavericks is 10.9.4. To update yours download and install OS X Mavericks 10.9.4 Update (Combo).
You can upgrade RAM to the maximum your model will support. That would be:
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
About OS X Memory Management and Usage
Using Activity Monitor to read System Memory & determine how much RAM is used
OS X Mavericks- About Activity Monitor
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs.
Maybe you are looking for
-
How do I access my "old Mail" account in my AOL mail folder?
When I access my AOL account from my Ipad, the folder for "old Mail" doesn't appear as a selection. How do I access this folder?
-
Can I still buy a Ipad2 in the apple store or only online
Within 3 weeks I'm leaving for a holiday to the USA and want to buy there a Ipad2. Can I still buy one in the Apple Stores or do I need to order a Ipad2 online and then pick it up in the store near where I stay? Because if You look online at the stor
-
When opening the version of Iphoto i have an error message appears that says; You can't open your current iphoto library using this version of Iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use th
-
A better project management calendar
I prefer iCal to Entourage but like how I can manage project in Entourage. I'd like to manage a project with multiple calendar dates and its own to-do list so when I open iCal, I can just click on the project and see all associated files, upcoming da
-
A/C Entries for MVT 701 & 702
Hi All, Please tell me A/C entries genertaed while posting physical entries documents(MVT 701 & 702). Regards Pavan