Moved Hyper-V 2012 VM to Hyper-V 2012 R2 long ping respond, slow connection

Hi,
I have two Hyper-V server, one in 2012 and the other in 2012 R2. I use SCVMM 2012 R2 and begins to move all my VM(host 2012) to my new host 2012 R2. Some of the VM begins to have slow network connection. I try to upgrade the integrated Windows services but
not luck, some vm are really slow with the ping respond (over 75ms). Other VM who's been migrated and works well responds in 1ms like the host itself. a new vm directly created on the 2012 R2 host is fine and respond in 1ms. So what can be the problem?
Thanks

Hi GuilaumeCRL,
For troubleshooting please try the following items :
a.  try to add a new NIC for the problematic VM
(In the VM , open device manager --> view --> show hidden devices --> uninstall all devices under networkadapters -- shutdown the VM --> remove the old Vnic --> add a new one --> start the VM try to ping again )
b.  try to  disable VMQ in the properties of  teaming members (physical NIC ).
c.  try to keep the NIC driver up-to-date
Hope it helps
Best Regards
Elton Ji
If it is not the answer please unmark it to continue
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Run hyper-v on physical machine with server 2012

    I currently am running windows 8.1 with several 8.1 hyper-v clients. I am about to have to do a new install of the host os because i am getting a new faster drive. The convenience and speed of backing up and moving hyper-v clients to different systems is
    so easy i was hoping i could take advantage of it for the future. i would also like to use some of the functions of windows only available in the server edition of windows. as a dreamspark student you can get a free copy of windows server 2012. I have not
    set up a windows server, but i have run a Linux and bsd one. I only have 1 physical machine. Does it make sense at all to install windows server 2012 and then have all of my working systems be hyper-v clients? i play games and have a nice graphics card. the
    clients i don't think use them directly, but would use it via the host i think. I also use visual studio for app dev and i beliebe VS installs a Virtual like machine for windows phone. Can i do this? what would it prevent me from doing that i currently
    do? is there a better way to go about this? maybe do the reverse and run the server in hyper-v? thanks

    Personally I'd say it depends mainly on what you want to do with the desktop side of your machine. You certainly could install Server 2012 onto your desktop, and from reviews I've seen it's far more suited to being used on a desktop setup than previous server
    versions. You still have to do some additional work to enable some of the functionality you'd normally have on a desktop, but which would never be found on a server, but it is more plausible now. There's a bit of a discussion here of the possible issues and
    gotchas
    http://www.eightforums.com/general-support/7520-windows-r8-windows-2012-server-makes-great-laptop-os.html which cover some of the main things you'd need to do.
    If you're just looking to play with Windows Server and the functionality you're looking to use isn't Hyper-V related then I'd probably go with simply making the Windows Server 2012 another instance on your existing setup, eg within Hyper-V on your 8.1 desktop.
    There's no real difference between hyper-v on windows 8 and server 2012 so that side of things doesn't make a difference, and windows 8 is quite capable of handling server vm's (I've got 12 VM's running on my windows 8 desktop, and none of them are client
    OS's).
    The main thing which would dissuade me from installing Server 2012 on a desktop is support for other desktop applications. If you're planning to continue using the machine as a desktop, and especially if you play games on it, you're bound to hit issues
    with compatibility at some point. Not legitimate compatibility, more situations where some apps will try to detect the OS you're running, and either not recognise the server OS and refuse to install, or recognise it and refuse to install as they're only designed
    / licenced to be install on a client OS. Some apps which are free to use on a client installation for instance require a licence for use on a server (since it's assumed to be commercial installation).

  • Windows Domain Controller on Windows Server 2012 R2: Hyper-V roaming profiles not loading due to slow connection

    I have racked my brain and done everything that I know to do for about two weeks now.  I am setting up a new system at our fire department and I am having the worst luck with getting the workstations to login to the domain controller with roaming
    profiles.  It keeps telling me that the roaming profile could not be loaded because of a slow connection.  These are workstations that are connected directly to the switch that the DC is connected to.  I have tried multiple connections regarding
    the layout (DC into the router, router into the switch).  The router is a Cisco RV220W.  I have two VLANS, one for public and one for private domain.  The Private VLAN has DHCP turned off since I am providing it through the DC.  I currently
    have a connection from the Private VLAN going to the unmanaged switch that the workstations and server are plugged into.
    The server is a Dell PowerEdge R420 that has 6 NIC ports (1 dual port and 1 quad port).  I have a virtual switch setup on Hyper-V for an external port (let's say Card 2 Port 3) that is assigned to the WS 2012R2 Domain Controller.  The DC can see
    the internet fine and the workstations can connect to the shared folders on the server.  I can retrieve files by just using the computer name or FQDN.  The DC is also running DNS and DHCP.  The DNS has the _msdcs setup from when I installed
    the active directory role.  I have attempted to assign static IP addresses to the workstations:
    IP:                     10.0.0.80
    Subnet:             255.255.255.0
    IPV4 Gateway:  10.0.0.1
    IPV4 DNS:        10.0.0.12
    I've attempted "append the specific DNS suffix", I've "registered the connection in DNS", I've used "use this connections suffix in DNS registration".
    The server is assigned:
    IP:                     10.0.0.12
    Subnet:             255.255.255.0
    IPV4 Gateway:  10.0.0.1
    IPV4 DNS:         10.0.0.12
    The DNS entries have forwarders that forward to my ISP DNS servers for lookup
    I've enabled and disabled DHCP, I've installed a new VM just to create another DC to make sure that I didn't goof up when I created it.
    I've lost my patience with this project and am sinking fast.  Can someone please offer some advice as to what I've done wrong?  I've created this exact scenario at work many times but, I've never done it with Windows Server 2012.  Is this
    possibly something to do with the Dell PowerEdge server (Generation 12) with the SR-IOV?  I am going to attempt to work on it some more tomorrow when I get over there.  I think there may be an issue with the SR-IOV not being enabled on the machine
    through the Dell Bios.  Would the SR-IOV really cause the workstations to report a slow connection?  When I login at the domain controller the roaming profiles and folder redirection work fine so, I know the GPO settings are correct.  I don't
    have "ignore slow connections" or any of those GPO's set.  I need to get it working the correct way so, I didn't want to fool the server when there is another underlying problem.  Any help that someone can offer, I am more than willing
    to listen.  If you need more information, please ask.
    Thanks,
    Jay

    So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
    post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
    virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
    Im disappointed in MS right now.

  • How to use Win 2012 r2 Server Hyper-V?

    How to use Win 2012 r2 Server Hyper-V? Can we install Virtual OS in new machines(which doen't have any OS)? OR it required any OS in client machine to access Virtual OS of Hyper-V?
    Regards
    Meer Akbar Ali

    Hi Meer,
    In addition , here is a video link about installing OS in VM (it is 2008 but it is  similar to 2012R2 ):
    http://technet.microsoft.com/en-us/video/hh859745.aspx
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • DPM 2012 R2 Backup job FAILED for some Hyper-v VMs and Some Hyper-v VMs are not appearing in the DPM

    DPM 2012 R2  Backup job FAILED for some Hyper-v VMs
    DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error.  If the backup process is retried,
    the error may not reoccur.
     (0x800423F3))
    All the vss Writers are in stable state
    Also Some Hyper-v VMs are not appearing in the DPM 2012 R2 Console When I try to create the Protection Group please note that they are not part of cluster.
    Host is 2012 R2 and The VM is also 2012 R2.

    Hi,
    What update rollup are you running on the DPM 2012 R2 server ?  DPM 2012 R2 UR5 introduced a new refresh feature that will re-enumerate data sources on an individual protected server.
    Check for VSS errors inside the guests that are having problems being backed up.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • DPM 2012 R2 and Hyper-V Replication, huge conflict and failure to backup

    I have recently created new 2012 R2 servers with DPM 2012 R2 in attempts to upgrade an environment.
    When attempting to create Protection Groups for Hyper-V VM, DPM will consistently omit any VM that happens to have Hyper-V Replication enabled, whether that server is the primary VM instance or a replica VM instance.  ALL other Hyper-V VMs are listed,
    only those with Replication enabled are omitted.  This happens on both DPM 2012 R2 servers, exactly the same results - all VMs without Hyper-V Replication enabled are listed, none of the VMs with replication enabled are visible in the list.
    Obviously we need to be able to backup VMs with Hyper-V replication since replication is only a tiny portion of a DR strategy, it doesn't cover ANY recovery scenario other than the loss of the primary VM - it doesn't allow for restoring any missing or damaged
    files or undoing any other changes to the VM.
    The DPM 2012 R2 server have the latest update rollup (#4) applied and the protection agents have also been updated.
    Looking for some hints since DPM 2012 R2 is supposed to support backing up both the primary and replica VMs, especially when the Hyper-V host if Server 2012 R2.
    Might have to use Windows Server Backup or Veeam's free Hyper-V backup since aside from enabling Hyper-V replication to keep a couple snapshots, DPM isn't a viable backup options in combination with Hyper-V replication.

    As per the following blog:
    http://blogs.technet.com/b/dpm/archive/2014/04/25/backing-up-of-replica-vms-using-dpm.aspx
    you should be able to backup Hyper-V VMs even if they are replica VM.
    When you configure DPM to protect both primary and recovery hosts, VM will appear on any of the Servers as it will have the same GUID.
    So, protect primarya nd recovery hosts using different DPM or if you want to protect both primary and recovery using same DPM, make sure that you check both servers so as to discover VM.
    Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

  • Move a VM created in Hyper-V 2012 to a Hyper-V 2008R2 Server

    Hi Guys
    I'm trying to move an Exchange 2010 server I created in Hyper-V 2012 to a Hyper-V 2008R2 Server. The files are in VHD format and I re-created the VM on the 2008R2 server and did not do an Export-Import.
    Initially the Server would start up fine but I could not get the network card to work at all and the Disk Manager on the server would not display the drives. 
    I then re-inserted the Integration Services disc and it re-applied all the drivers. Now after restarting the server Windows just gets stuck on Preparing to configure windows and doesn't go any further. 
    Any ideas? 

    Hi,
    Have you tried to move the VM back to Windows Server 2012 and then export the VM and import it to Windows Server 2008 R2?
    Your VM OS has Windows Server 2012 Integration services install which is unknown for Window server 2008R2.
    You may uninstall Windows Server 2012 Integration services and then export the VM or VHD.
    Check that and give us feedback for further troubleshooting.
    Version Compatibility for Integration Services
    http://technet.microsoft.com/en-us/library/ee207413(WS.10).aspx
    Lawrence
    TechNet Community Support

  • Can SCVMM 2012 R2 Operate Without Problems If Hyper-V Environment Is Running Windows Server 2012?

    Good afternoon,
    Are there any repercussions to using SCVMM 2012 R2 in a Hyper-V environment that is running Windows Server 2012? My Hyper-V hosts are running Windows Server 2012.
    Thanks,

    Hi,
    running SCVMM 2012 R2 in a Windows Server 2012 Hyper-V environment is fully supported
    best regards Marc Grote - www.it-training-grote.de

  • Clustering Free Hyper-V or Windows Server 2012 Standard with Windows Server 2012 Datacenter

    Hi,
    Is anyone running a cluster which has Datacenter 2012 clustered with either Standard 2012 or Hyper-V 2012?
    I have seen posts here and elsewhere that say it is possible but when I rang Microsoft Licencing team to discuss licensing in this scenario they advised me that the hardware and OS on each clustered server must be identical.
    Now I'm really confused.
    Thanks,
     

    Please repost in the proper forum:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
    This forum is for the product Virtual Server 2005, not Hyper-V.

  • Reports not Generated after moving SCCM 2012 SP1 DB on SQL 2012 SP1 cluster

    Hi all,
    i have moved my SCCM 2012 SP1 DB on SQL 2012 SP1 Failover Cluster,this cluster is a two node cluster.the DB was moved fine and the DB configuration in SCCM Site maintenance was also done successfully.After the migration process,SCCM was working fine created
    few collections & packages, then checked the DB on cluster & they were updated successfully.
    but when i tried to install report server on my SCCM machine,again there was no instance displayed after entering the cluster name.
    I searched this & come across this post :-
    http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/4479e73e-8a19-4c7e-9418-b36770656b9b/
    which says to install report server on the cluster node machine which is currently running the Reporting Service.I tried to install the report server & the instance was detected this time.it was installed successfully.
    But when i tried to generate reports I got this error :-
    Permissions are fine as i have added SCCMadmin & sccm machine in the local admin of both the nodes.
    Please Help.
    Thanks,
    Pranay.

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    If you look at your second screenshot the Remote errors is not enabled. Use this blog to enable them.
    http://www.enhansoft.com/blog/enabling-remote-errors-in-sql
    If changing the data source on the report fixed it for a single report. It means that your shared Datasource is having problems. Reset the username and password within CM12 console and this should fix it for every report.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

    Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
    I get the below error
    Could not find vsjitdebugger.exe
    Blogs say anti-virus is stopping but I dont have one on the system.
    Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
    Now i could not install both the software.
    Can I get some help regarding this?

    Hi Nandu,
    As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012.  If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
    in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
    Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
    To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
    http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
    1. You could execute the sfc /scannow command following steps below.
    a. Press "Windows+R", type in cmd and then right click "Run as administrator"
    b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
    c. Wait until the System File Checker finishes the check.
    2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
    3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
    4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
    In addition, if you are unable to install  Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup  . It is appropriate and more experts will assist you.
    Regards,
    Michelle Li

  • Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together

    Hi.
    Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
    for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
    + Import-Module <<<<  (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
    If first loaded DPM 2012 module::
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
    types. Retrieve the LoaderExceptions property for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
    an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
    +         Import-Module <<<<  'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
    ualmachinemanager\virtualmachinemanager.psd1';
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand

    Vote if you have same problem:
    https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together

  • I moved my iphoto folder to a new location by mistake. I've moved it back to its original location, but iphoto no longer sees the photos. What step(s) am I missing to return to the setup I had.

    i moved the folder containing all of my photos to a new location on my hard drive by mistake. I've moved it back to its original location, but iphoto no longer sees the photos. What step(s) am I missing to allow iphoto to see the photos as it did before. Also,
    I am trying to back up all of my photos to a thumb drive. Is there a way to do this thru iphoto?

    Witholut knowing what you did, it's hard to know what you missed doing, no?
    Try Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
    Backing up just the Photos? File ->Export
    Backing up the Library? 
    Most Simple Back Up
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex:
    Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate

  • My Apple iPad 3 is less than 6 months old - purchased in March of 2012.  I believe it already needs a new battery.  It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in.  Please advise - it is very annoying.n.

    My Apple iPad 3 is less than 6 months old - purchased in March of 2012.  I believe it already needs a new battery.  It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in.  Please advise - it is very annoying.

    Take it to Apple Store. You are covered under your 1 year warranty.

  • After enabling iCloud, the calendar on my MacBook shows a window stating "moving calendar to server account. Then a box appears saying "server responded with an error message 403. Then another box shows "couldn't move calendar to iCloud, an error occurrre

    After enabling iCloud, the calendar on my MacBook shows a window stating "moving calendar to server account. Then a box appears saying "server responded with an error message 403. Then another box shows "couldn't move calendar to iCloud, an error occurrre

    iCloud's Calendar is full of errors and problems for me.  The "Couldn't move your calendars to iCloud because an error occurred" is now gone (by itself) but nothing syncs between my Mac's Calendar to iCloud or my iPhone to iCloud.
    I tried creating a new event directly on iCloud.com to see whether it pushes to any of my device and  got this "This event couldn't be created because of a server error; please try again." error.
    Apple, please fix this!!

Maybe you are looking for