MOVED: K7D Master Sound Problems

This topic has been moved to Server/workstation.
K7D Master Sound Problems

...AC 97 is common hardware so it should be easy to find a driver...maybe here?..
...I'm not familiar with that OS, but have you done all the updates?..

Similar Messages

MOVED: K7D Master Video problem

This topic has been moved to Server/workstation.
K7D Master Video problem

Quote from: Liquidman.com on 13-December-05, 09:40:12
Well let's see, The k7D is a dual mobo and will work with only a limited number of cards, after trying a few I finally settled on an nvidia Direct X 9.something (there is no name on the card, and I have 6 video card box's) I put in a a Wildcat 5110 I had laying around, but the driver doesn't support Max 8, or even 7, can't use software/Heidi. You just see the desktop through the viewports. This mobo uses an AGP pro slot, I don't even know if anyone's makeing these anymore.
Are you running linux ? If so i suggest a Nvidia card.

K7D Master Sound Problems

I have that board and installed win 2003 on it and downloaded the driver and it was fine then i added the highpoint 1520 card with rocket heads reinstall windows and now when i try to install the sound drivers, it installs but in device manager it still has it as unidentified... please help as I am now thinking that win 2k3 was a bad choice for this akward setup but it is so fast that it would be perfect for my unreal tourny server.

...AC 97 is common hardware so it should be easy to find a driver...maybe here?..
...I'm not familiar with that OS, but have you done all the updates?..

K7D Master Rebooting problem

I have two new systems I put together, with the K7D Master board, and two AMD MP 2000+ on each board. Video card Quadro 750 xgl, and 512m pc2700 ram. I have pulled everything else out and the problem persists.
My problem after a fresh install of Win2k and both systmes runs great. I leave it on and during random intervals the systems will reboot it themselves. Both systems do the exact same thing, usually about once a day. They appear to run fine tempature wise, and both have the 1.6 bios update from MSI site. The doesnt appear to be any set time that it happens. Looking through the event log doesn't bring up anything useful, and I dont have anything loaded other than Win2k service pack 2, and all updated drivers, and security updates.
Any help??

Main Memory
- Supports eight memory banks using four184-pin DDR DIMM
- Supports DDR SDRAM DIMM
- Supports a maximum memory size of 4GB (registered DDR
only)
is it registered ram not normal
http://www.memtest86.com if it is to check it
http://www.msi.com.tw/program/products/server/svr/pro_svr_detail.php?UID=73&MODEL=MS-6501

MOVED: K7D Master does not recognize 1GB Reg ECC modules

This topic has been moved to Server/workstation.
https://forum-en.msi.com/index.php?topic=96220.0

How many modules are you talking about? If you try to use 4 of them, I can imagine it won't work.
Also, are they trouble free?
Try Memtest86 on each of the sticks.
I see this on the MSI product page:
Quote
• Supports eight memory banks using four184-pin DDR DIMM
• Supports DDR SDRAM DIMM
• Supports a maximum memory size of 4GB (registered DDR only)
Note: Because of limitations imposed by the personal computer architecture and BIOS, the user-accessible memory is less than 4 Gbytes even if 4 Gbytes of physical memory is installed.

MOVED: I have problems with my K7D MAster board

This topic has been moved to Server/workstation.
I have problems with my K7D MAster board

Juansebastianco,
you can try this, to see if it makes a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still crash after being on?

K7D master L - no sound - weird bios

;(
Hi I have just bough a k7d, having multiple problems. MSI rediceted me to here
Win2k professional
k7d master L
XP1800+
256 DDR 266 RAM
60 GB 7200 Maxtor drive
Gforce 440
Factory BIOS. Optimized defaults.
If i get into the BIOS in PCHelath, the system will block. Only hard reset will bring the system back
No sound. Multimedia Audio controler driver says. The drivers for this device not installed. Code 28. Of couser I have installed them from the CD and also downloaded file from MSI to check they were the same drivers. Even from MSI
Memory bank 1 will never work. The system will not even boot. Bank 2 seems stable.
PC Doctor will symply crash the machine, at starting, needed switch off from mains. Compains about my hardware not being something control capabale ?¿?
I have dedicated more than 16 hours to configure this and I am not new to the stuff. It is driving me mad.
Any help appreciated

Quote
Originally posted by Bas
>Hi,
>I have the same board in use...
>I had many problems too, you really want registered >ECC DDR on this board.
This week I am exchanging the current RAM to ECC registered DDR.....
>Also, you need to install your OS from scratch or you >will never get it stable or the sound to work properly...
Upsss, I get a company custom setup image with win2k and company applications....this is going to be a challenge.....I will have to tinker a little or I will have to buy a cheap compatible sound card....
>My sound dropped all the time, after a complete >reinstall of the OS it worked fine.
>Make sure you have updated the BIOS to version 1.5
Heard to many nasty stories on BIOS update....I will have a carefull look at it. Is it really necesary ??
I will browse the forum for instructions.
>and only use the CDrom delivered drivers.
>A last thing, make sure your PSU can take the board >and has the 4 pin 12V connector, without it you won't >have enough power.....
Yes, I've 430wats, 27A on 3.3. Only one CPU currently. It should be enough.
Also, I am struggling trying to get sound working with Linux. Seems to me that there are only VIA/Intel drivers for AC97 on Linux. I posted a note to AMD for some help....
Many thanks for your help.
JCG

MSI K7D Master L - CRC Problem

Hey gang.
I've been having some CRC troubles with my MSI K7D Master L. On most occasions, I cannot perform an install from either of the cd drives--eventually a CRC error will pop up. In addition, data on the hard disks (i.e. registry settings) dissapear or are corrupted. Which sucks. ...and you can imagine how my slightly corrupted windows install is performing :(. ?(
Here's my specs:
-AMD MB 2800+ Barton (Only one CPU installed right now)
-1024 mb of Kensington ram
-ATI 9700 Pro
-Bios Version 1.3 (latest bios for Master L)
-Enermax 431watt power supply
-Creative Audigy Sound card (onboard sound disabled)
Just for reference, I've ran all the diagnostics (memtest86, and that IBM hard disk checker) and no problems show up. Only the motherboard and processor are new... all of the components, cables, drives, etc. were working well before I poped in the new MB. Of course, I started fresh with a clean formatted drive for my windows install.
I've heard that my Enermax 431 is about a 10 on the blows-O-meter. Could this be the problem? I realize that my new AMD 2800MP is prolly pulling out a bit more juice than before.
I love this motherboard, and I know that CRC errors are pretty rare on the K7D (cough, unlike some other MBs), I'd hate to have to RMA it.
Thanks in advance ,
JonnyLongTorso

Replaced the Enermax 431 supply with an Antec 550 watt unit. Still getting the errors.
Any ideas?

Sound problems with CNBC and E4 with TV @nywhere Master

Got the TV @nywhere Master card, had no problems with tuning in the cable stations picked up all the channels, but E4 and CNBC have no sound just a anoying clicking sound. Have updated the drivers and software, tried the card with Windows 2000 SP4, and XP pro SP1, tried both internal & external audio connections, nothing makes a difference. Anyone got any idea's?

I bought and installed a TV@nywhere Master yesterday (18June03) and no sound problems at all. The Radio volume control definitely controls the line in volume, but check that the mixer Volume Control is not being muted. My Sound in via on-board sound 6 channel Realtek ACL650.
I have been generally very pleased with the results but have yet to get the remote to do anything, I have WinXP SP1 with all updates installed. Not sure if it is my System set-up or faulty remote but it a minor concern for me.
I would suggest that you take a look at VirtualVCR (freeware) for your capturing if you want more that Mpeg files. It works very well for me and allows me to capture using the frame size and codec of my choosing

K7D master and sound on Windows 2003?

Does anybody know if Windows Server 2003 can work with the AC97 sound on the K7D Master? With Windows 2000 it sure works, but in WS03 I cannot find the right driver to get rid of the message in de Device Manager that it has no driver for the Multimedia Audio Controller.
The latest Windows 2000 driver for the 768 chip/AC97 installs but to no avail. Neither using the original CD.
Ruud

no I would get a PCI/USB alternative like thats avaliable to you.

Problems to get run a 7800GS on my K7D Master -L - HELP -

hi,
i having problems to run my new 7800GS on my K7D Master -L
during driver installation(in the middle of) on windows XP pro the system turns into black screen.
My System:
2 Athlon MP 2800+
2x 512 MB Samsung
Powersupply: +3.3V (38A), +5V (44A), +12V (20A) (enermax EG465P-VE)
only one harddisk
i removed all cards - no solution
i try to run with only one CPU - no solution
i´m really on fire with this problem
has anybody any idea how to fix this ?
i also loaded optimized bios config... clear cmos... i do anything but this card would not run
and the card supports AGP 4x
before i try the msi 7800GS same problem
now i have the club 3D 7800GS ... same problem
i dont think thats the pwoersupply... what did u think ? but it has enough power... or ?
please help ! thanks
and... bios is 1.91 (latest stable of course)
...and try 4 different forceware drivers
thanks

Cool but the temps here and probably where you live (I checked your IP, we live 80km's apart ) are way lower then the last couple of day's.
So at lower temps, the PSU can deliver more power.
I hope it will still work when the hot temps are comming back.

K7D Master Problem

Hello all, I just purchased a K7D Master and 2 MP1800s. I cannot get the system to boot. The speaker emits a never ending click click click click and the D-LED shows all red, which the manual states, "The D-LED will hang here if the processor is damaged or not installed properly." I have tried both cpus by themselves in the primary cpu socket, and an XP 2100+ I had sitting here. All three processors work in other systems. I've cleared the CMOS multiple times, tried two different power supplies (Antec 350w, and a Thermaltake 480w), and in and out of a case. Any other things I should try?
Thanks,
Oldbenwa

Hi,
Probably a stupid suggestion but:
Quote
The speaker emits a never ending click click click click
Sounds like a stuck keyboard key! Dodgy keyboard perhaps! Well I'll give myself 10/10 for effort and 0/10 for helpfulness!
Sorry that's all I could think of!
Hi, I don't know much of your server board, but does it have a FSB jumper (SAFE/USER)? If it does, set to SAFE before clearing CMOS! Make sure you also completely Isolated (unplug it) from the mains supply while clearing!
Axel

I have problems with my K7D MAster board

I just have gotten hands on a new K7D master mobo (yeah i know it is not the newest board on the market but i had the cpus so why not). I have just installed Windows 2000 server on the machine. And everything was working fine until I was going to transfer some very large files over to my other computer (DVD isos 4,5 GB) and then the machine just locks up. And I have to reset it to get it up and running again.
I have changed the network adapter and reinstalled the whole system, but it doesnt help.
When i look under the device manager there is an unknown device called "unknown pci bridge" it seems its the AMD 768 chipset.
But here comes the real problem, I cant instal any AMD drivers?? When i try to instal the EIDE driver, the 768 chipset driver or any of the AMD drivers its just saying that there is no AMD components found.... And the driver wont instal.
Anyone heard of this before?
MSI K7D Master
2 X MP1900 CPUs
Adaptec 29160 scsi board
2 X Seagate U160 18GB SCSI disks
1 X Seagate 200GB IDE disk
1 X Samsung 250GB IDE disk
1,5 GB ram Crucial and Apacer
Edit: Problem solved, seems that I must have an PS2 mouse plugged in
When I tried copying with the PS2 mouse it all works
I found this topic in www.2cpu.com
http://forums.2cpu.com/showthread.php?s=e88a5eb9c52b6bf96d532faf85d626cf&threadid=42709&highlight=K7D+master+lock
Speaking of strange problem... lol

Juansebastianco,
you can try this, to see if it makes a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still crash after being on?

K7D Master-L graphics problem: multiple display adapters/no winxp star

Hiya,
I just recently bought a new K7D Master-L and I've had a few problems with it. Other than these issues the board has been great, but this is getting pretty annoying and I can't seem to fix it, so I'm posting here for advice/help/solutions.
System Specs: I have two AthlonMP 1900+ and 786MB Corsair RAM (registered PC2100, 512MB in slot 1, 256MB in slot 2). I have a WD400JB (40GB ATA100 drive with 8MB buffer) and a generic IDE CD/DVD-ROM. I have an ATI Radeon 9700 Pro AGP card running at 4x.
When I first installed the motherboard I tried to load Windoze XP on it (actually I first used Linux but had ...driver problems). Anyway XP seemed to install fine, but upon reboot, the system would get to the "progress bar"/"OS loading" screen (the small blue bar that goes back and forth) and the bar would get stuck exactly 2 "bars" from where it started--every time. I could boot into safe mode, but nothing seemed screwy. Doign the command-line boot (I think) where it shows the drivers it is loading, it got to the "agpgart" file then stopped, maybe this was the problem. I gave up after a dozen reboots or so, trying various things, and installed Windows 2000+SP3.
Win2K installed fine, and after installing the drivers on MSI's site for northbridge, southbridge, audio, and lan, and installing ATI's latest Catalyst 3.4 drivers (I also tried 3.2), device manager had no more problems, save one.
The problem is that there are two display adapters listed: "RADEON 9700" and "RADEON 9700 (Secondary)". There were two adapters listed before I installed the drivers, called something like "Display Adapter" and "Display Adapter (VGA compatible)". In Properties it says "PCI Slot 4 (PCI bus 1, device 5, function 0)", is this normal for AGP cards? Here is a screenshot (I disabled one to see if that helped my settings-loss problem, but it doesn't):
[ALIGN=center][/ALIGN]
Whats worse is that the display settings don't seem to stick around across reboots--it always reverts to the default settings of 640x480x16--which is extremely annoying. These problems exist regardless of whether I have a Service Pack installed (currently I'm running on a fresh Win2K install with no updates and having the same issues). I've tried multiple drivers for the card and no change, I've tried with/without the updated chipset drivers, and I've had this same setup work on my previous motherboard (Tyan Tiger MP) without seeing multiple display adapters.
Any ideas? Or is there something that might fix my WinXP startup freeze? If so I could reinstall WinXP and see if that has the same multiple adapter problem...
Thanks for any advice.
Josh

Well my system just booted into 640x480x16, so it appears those registry changes didn't fix the issue. The registry settings were simply changed back to 640x480x16 for some reason. I haven't reinstalled the motherboard drivers, but I gathered them all up and I'll try this later today. Here are the latest drivers I found, all from MSI's site:
Onboard AC97 Codec Driver
Support model:   K7D Master (MS-6501)
Description:   AMD AC97 Codec Driver version 10B
Date:      2002-8-20
http://download.msi.com.tw/support/dvr_exe/AC97_Codec.exe>
Intel 10/100 LAN device driver for Win2000
Support model:   MS-6508...MS-6501...MS-9202
Description:   A formal release from Intel.
      For integrated Intel 10/100 Lan.
Date:      2003-2-25
http://download.msi.com.tw/support/dvr_exe/intel_Win2000_for_100.exe>
AMD 762 Driver
Support model:   K7D Master (MS-6501)
Description:   - WHQL Certified Driver
      - Added support for Windows XP
      - Changed settings to only use auto-compensation for the AMD-762 (MP) Northbridge(2000/XP).
Date:      2002-8-20
http://download.msi.com.tw/support/dvr_exe/MINIPORT_533.EXE>
AMD 768 Driver
Support model:    K7D Master (MS-6501)
Description:   - WHQL Certified Driver
Date:       2002-8-20
http://download.msi.com.tw/support/dvr_exe/POWMGMT_122S.EXE>
AMD EIDE Driver
Support model:    K7D Master (MS-6501)
Description:   - WHQL-Certified for Windows 2000/XP ONLY. Version 1.43s
Date:      2002-8-20
http://download.msi.com.tw/support/dvr_exe/EIDE_143S.EXE>
Microsoft Windows® 2000 Patch for AGP Applications on AMD platforms
Support model:   K7D Master (MS-6501)
Description:   This is a registry file for Windows 2000
Date:      2002-8-20
http://download.msi.com.tw/support/dvr_exe/largePageMinimum.reg>
Award® BIOS I have 1.6 (?)
File Size:   234KB
Version:   1.82
Update date:   2003-5-12
Update Description:   Support AMD MP 2800+ in correspondance with AMD web site recommendation
http://download.msi.com.tw/support/bos_exe/6501v182.exe>
*** NOT USED: OLD DATE AND WRONG CHIPSET NUMBER ***
Onboard NIC Driver
Support model    K7D Master (MS-6501)
Description
-Intel GD82559ER LAN chipset driver
Date    2002-8-20
http://download.msi.com.tw/support/dvr_exe/E100CE.exe>
We shall see if this fixes the multiple adapter problem. As far as the display settings problem, I don't know that the deal is. It works fine on other motherboards with the same hardware and drivers, so it must be something with the K7D, Windows, and ATI interaction.
Josh
P.S.: There is a bug with this forum software and apostrohpies. Every time you preview your post it inserts escape characters ("\") before apostrphies, and also inserts escape characters for these escape characters, so quickly you have something like "\\\\\\\'" where you want "'".

K7D Master-L with LAN problems

I've just completed construction of my new K7D Master-L based machine and am running into LAN problems. The first K7D Master-L I received had a bad IDE controller on it, and now the replacement board has intermittent LAN issues.
WinXP Pro installed fine, and I was able to install the LAN driver from the MSI CD and get things up and running fine. After about 20 minutes or so, the LAN connection drops out and then comes back a few minutes later. This cycle repeats over and over. There are no duplicate IP addresses on the network, there are no errors in the XP system log, and all of the other systems on the network continue to work fine during these down periods.
I checked on the MSI website, and there are no drivers available for the Intel 82551QM lan controller that is on the K7D Master-L board. Does anyone know where I can get an updated driver to try? These types of problems are most frustrating to debug.
Thanks,
Norm

Just an update to this:
The problem is definately the onboard LAN controller. I've tried a Netgear card as well as a real PCI based Intel Pro 100 card and both are working great. When I take the PCI cards out and try to use the onboard LAN, I still get intermittent outages.
Very strange. If any MSI engineers are listening, I'd love to hear your opinions. According to the OS, there are no IRQ, memory, or other conflicts that might be to blame.
Norm

MOVED: K7D Master Sound Problems

Similar Messages

Maybe you are looking for