MOVED: K8N Neo 2 overclock

This topic has been moved to Overclockers & Modding Corner.
K8N Neo 2 overclock

Hi, this version of BIOS will recognize your CPU pretty well:
here you can read the info: K8N Neo2 Platinum CPU Support Status
There you can find yours as supported:
Athlon 64 3700+ (E4 version)
Marketing Name
K8N Neo2 Platinum
MSI Model
MS-7025
PCB Version
1.00
Since BIOS Version
7025v1B.zip
here is the link for the Bios: K8N Neo2 Platinum 1.B Bios Version
Could you please post your PSU specs? like this e.g. 12v 22a, 3.3v 30a, 5v 50a
kind regards

Similar Messages

  • MOVED: k8n neo fsr overclocking results

    This topic has been moved to Overclockers & Modding Corner.
    k8n neo fsr overclocking results

    well i dont know much but im pretty sure u should set memory timing to 1t

  • MOVED: K8N NEO-FSR - Can't find network unit?

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=118264.0

    Quote from: Stu on 09-July-08, 03:00:42
    Check that onboard LAN is Enabled in BIOS (under Integrated Peripherals)
    Was "Auto"
    Quote from: HenryW on 09-July-08, 04:58:56
    Looks like they're here for K8N Neo-FSR.
     http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=573
    Will try this one, thanks! (Will post if it worked a bit later)
    Umm, btw... Where should I extract the files?
    Quote from: Fredrik Åsenius on 09-July-08, 05:07:48
    Tjena Rikard! You have to describe your system in some detail.
    Some famous culprits:
    - Other PCI-cards.
    - Poor or old Windows installation.
    - Weak PSU.
    - IRQ problem.
    - A combination of all or any of above.
    The network card is not a PCI-one, but integrated to the motherboard. Only card in the system is a PCI-E graphic.
    Maybe poor or old windows, might try that...
    Shouldn't be weak PSU, It's pretty good, I've been told.
    IRQ?

  • MOVED: K8N Neo MS-7030 754 socket, looking for parts

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=105761.0

    this was posted in Other MSI Products area, so i moved to AMD64 Nvidia area for better attention
    Quote
    I am looking for the accessories for a K8N Neo MS-7030 mobo. Mine didn't come with the cables, d-bracket w/leds, driver CD. Can I order these through MSI, and how? Or does anyone have them to sell. Need help, cant find anywhere.
    How to contact MSI.
    Quote
    Also, any recommendation for a northgate chip cooler for ths board.
    Can anyone recommend me a Northbridge fan replacement?

  • MOVED: K8N Neo Platnium not detecting PCI cards

    This topic has been moved to Intel P4 & Celeron P4 based board.
    K8N Neo Platnium not detecting PCI cards

    I had a similar problem with a 945p neo platinum board.  Anything I plug into any PCI slot didn't detect.  I solved the problem by flashing to the latest BIOS for the board.  Now everything seems to be working fine.
    Maybe that might work for you?

  • MOVED: K8n Neo 4 acting wierd

    This topic has been moved to AMD64 nVidia Based board.
    K8n Neo 4 acting wierd

    I just built a new computer with this board.   I run an online graphical game (Dark Age of Camelot) for 1 hour, and then the virtual memory overloads and crashes the game.  I do NOT have any of your other symptons tho.  Possibly related?  Latest drivers for everything, no viruses or spyware to be found.  I havnt been able to locate this problem.

  • MOVED: k8n neo not liking corecell

    This topic has been moved to AMD64 nVidia Based board.
    k8n neo not liking corecell

    Quote from: alitayyab on 27-December-05, 20:02:01
    core-center is fickle if u ask me. i was getting all sorts of lockups etc until i uninstalled this. everything has been okay since.
    i think core-center needs a little more work, as far as stability goes. i wish msi would make something like intel's system watcher (cant remember the name) utility. it was very efficient on resources (<1%) and was very  good.
    Core Center just plain sucks... & has done so for quite some time. And under no circumstances should you use it for OC'ing & such, as it will surely corrupt your BIOS eventually.
    SpeedFan does a good job of temp reporting & it's free. It takes a little thought to figure out which sensor is for what but it's not that big of a deal & doesn't use much CPU cycles. It can provide temp graphs over time too. Just Google for the latest version.

  • MOVED: K8N NEO Platinum Bios Update - Memory Downgrade

    This topic has been moved to AMD64 nVidia Based board.
    K8N NEO Platinum Bios Update - Memory Downgrade

    just switch back to bios 1.7

  • MOVED: K8n Neo 2 Platinum drivers for Vista 64

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=110820.0

    There are many 'K8N Neo4' boards, so go through this search result list, find the exact board you have, click on the Drivers tab, and then download the audio drivers you need.
    http://global.msi.eu/index.php?func=searchresult&keywords=k8n+neo4

  • MOVED: K8N Neo 2 Platinum - installing xp problem

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=73747.0

    Quote
    Could the difference  be because you have the neo and RC1 whereas I have the neo2 (1.4 BIOS) and RC2?
    Don't think so most likely difference between destination drives, yours is a sports car, fast when it's running but quircky, mine's a transit van works even when old & abused.
    Have you checked Western Digital Jumper Settings Pata & Sata even new drives have been known to have been jumpered wrongly.
    Onlly other maybe relevent thing I burned my iso at x8 to try & maximise cd quality, have seen a few pps with xp64 cds they couldn't boot from on the ms 64 newsgroup. Don't know if your cd may have been slightly screwed if thats the echnical word for it

  • MOVED: K8N Neo 4 Platinum Boot problem

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=110171.0

    Ups, I messed up. Thanks for moving this to the correct forum!
    Yes, I'm using 1st Dimm slot. I cleared CMOS with and without the power cord, with and without the battery, and every way possible. I even held the button down for 2 minutes.
    PSU is Vitsuba 450W. The 12V rail has 20A.
    I don't have a better PSU. Should I buy one?
    Already tried barebone setup. Just didn't know what it was called. Reseated CPU but didn't change anything. There are no bent pins.
    How this happened. I was working in windows and it BSOD. I reset and it didn't boot at first time, but after several tries it finally booted. That was last week. The problem repeated once again yesterday, so I decided to do a clean reinstall of Windows, just in case. So I had some troubles to boot again but it booted ok after some time. Installed windows, drivers, updates, apps, etc and everything was fine. I switched off the system yesterday at night. Today the pc won't boot anymore. So, here I am!
    Thanks for your assistance and don't hesitate to ask me some more questions!

  • MOVED: Athlon 3000 + K8N Neo Runs Fine but cannot overclock......

    This topic has been moved to Overclockers & Modding Corner.
    Athlon 3000 + K8N Neo Runs Fine but cannot overclock......

    Hi Turfman, go to the end of this mile long thread:
    https://forum-en.msi.com/index.php?topic=80211.120
    Or take this shortcut:
    http://www.madshrimps.be/?action=gethowto&number=5&howtopage=145&howtoID=58
    Let us know what you got...if this becomes more of an OC thread, it may get moved...

  • MOVED: Overclocking Problems on K8N Neo Plat

    This topic has been moved to Overclockers & Modding Corner.
    Overclocking Problems on K8N Neo Plat

    As I had said that even when HTT is set 200 and memory divider used is 1:1 on my Corsair XMS (which was plugged in in my nF4 SLi mobo and has TCCD Ram chips) which is rated 2-2-2-5 at 200Mhz DDR and processor at stock speeds and voltage, memtest shows errors and system doesn't boots in windows.        
    Also my Ram sticks are rated 2.60V but when Vdimm set at auto Motherboard pumps 2.70V !! what's the problem , I use version 1.7 BIOS on my MSI K8N Neo Platinum
    Is that going to harm my RAM

  • MOVED: Unable to O/C FSB beyond 220 FSB (K8N Neo Platinum)

    This topic has been moved to Overclockers & Modding Corner.
    Unable to O/C FSB beyond 220 FSB (K8N Neo Platinum)

    And the Newbie award goes to:
    ME!
    Turns out that a little research over and the Amdmb forums cured my issue.
    What was wrong: The AGP lock.
    In order to get it engaged, you must set AGP frequency to 67 Mhz in the BIOS.  By default it is set to 66 Mhz.  At 66, the AGP lock is not active and you end up overclocking the AGP bus.
    Got my board to boot into windows up to 240 at 3.0-4-4-10 timings (2.80V).  However it isn't Memtest stable at that FSB.  System would post at 250 FSB, but memory couldn't keep up, and Windows wouldn't load.  Lowered FSB to 230, and got it Memtest stable at [email protected]  Also Memtest stable at 225FSB at [email protected]
    Will now work to see what the chip can do, and then try to see if I can't squeeze my memory to run at CAS 2.0.
    For all those out there with a similar issue, check your AGP frequency.  Another thing that I noted from the Amdmb forums, is that the thermal paste under the chipset heatsink is poorly applied on many boards.  This could also affect your stability, if the northbridge ends up overheating.
    So on that note, I take back my previous rant about the board.

  • MOVED: Looking for feedback on K8N Neo NF4 Platinum SLI, LUV THIS BOARD

    This topic has been moved to Overclockers & Modding Corner.
    Looking for feedback on K8N Neo NF4 Platinum SLI, LUV THIS BOARD

    Im no pro but with your raid setup you need to stay with bios 3.0, 3.1 or 3.2.  I understand that 3.3 & 3.4 causes problems but the new 3.53 beta bios fixes the problems in 3.3 & 3.4.  See below:
    https://forum-en.msi.com/index.php?topic=80933.120
    Regarding your pcie clock, if you are using coolbits and nvidia drivers only (no MSI drivers at all), then I have used nvidia's ntune to help set the clock.  For my x1 msi 6600gt, working backwards from the bus speed optimization it equalled to 106...but I am really not good at this and you should post your question under the VGA portion of this forum for a better answer to that 1 question.
    However, using MSI's DOT works well too and its automated.
    Btw, the pcie setting has nothing to do with your cpu/memory overclock.

Maybe you are looking for

  • How do I know where a file is saved?

    I tried to find using Finder my .doc document saved from NeoOffice Worker but it doesn't appear. I saved multiple times to make sure that it is saved.

  • Convert XML file to sap

    Dear friends               For converting XML file to SAP, I used TEXT_CONVERT_XML_TO_SAP function module. In this I have some doubt. Pls clarify this. 1. I am getting run time error with type h. 2  I_FIELD_SEPERATOR          = ';'    I_LINE_HEADER  

  • Change Vendro Account Group

    Hello everyone, Can someone tell me if it's possible to change the Vendor account group after the vendor has already been created. I already tried transaction XK02, but that isn't the solution. If it is possible, can someone help me. If it isn't poss

  • N95-2 Synchronise with Lotus Organisor and music f...

    My wife has recently been given my son's N95-2 and we are trying to interface the contacts and diary to Lotus Organisor ver 6 I have been able to use the PC Suite wizard to setup and point at the relevant sections within the organisor but when we try

  • HT1926 Help with error message (XP)? "There is a problem with this Windows Installer package."

    Just trying to update my iTunes, running XP, but the install stops at the same place every time and gives me this error message: "There is a problem with this Windows Installer package.  A program required for this install to complete could not be ru