MOVED: K8n Neo 4 acting wierd

This topic has been moved to AMD64 nVidia Based board.
K8n Neo 4 acting wierd

I just built a new computer with this board.   I run an online graphical game (Dark Age of Camelot) for 1 hour, and then the virtual memory overloads and crashes the game.  I do NOT have any of your other symptons tho.  Possibly related?  Latest drivers for everything, no viruses or spyware to be found.  I havnt been able to locate this problem.

Similar Messages

  • MOVED: K8N NEO-FSR - Can't find network unit?

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=118264.0

    Quote from: Stu on 09-July-08, 03:00:42
    Check that onboard LAN is Enabled in BIOS (under Integrated Peripherals)
    Was "Auto"
    Quote from: HenryW on 09-July-08, 04:58:56
    Looks like they're here for K8N Neo-FSR.
     http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=573
    Will try this one, thanks! (Will post if it worked a bit later)
    Umm, btw... Where should I extract the files?
    Quote from: Fredrik Åsenius on 09-July-08, 05:07:48
    Tjena Rikard! You have to describe your system in some detail.
    Some famous culprits:
    - Other PCI-cards.
    - Poor or old Windows installation.
    - Weak PSU.
    - IRQ problem.
    - A combination of all or any of above.
    The network card is not a PCI-one, but integrated to the motherboard. Only card in the system is a PCI-E graphic.
    Maybe poor or old windows, might try that...
    Shouldn't be weak PSU, It's pretty good, I've been told.
    IRQ?

  • MOVED: K8N Neo MS-7030 754 socket, looking for parts

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=105761.0

    this was posted in Other MSI Products area, so i moved to AMD64 Nvidia area for better attention
    Quote
    I am looking for the accessories for a K8N Neo MS-7030 mobo. Mine didn't come with the cables, d-bracket w/leds, driver CD. Can I order these through MSI, and how? Or does anyone have them to sell. Need help, cant find anywhere.
    How to contact MSI.
    Quote
    Also, any recommendation for a northgate chip cooler for ths board.
    Can anyone recommend me a Northbridge fan replacement?

  • MOVED: K8N Neo Platnium not detecting PCI cards

    This topic has been moved to Intel P4 & Celeron P4 based board.
    K8N Neo Platnium not detecting PCI cards

    I had a similar problem with a 945p neo platinum board.  Anything I plug into any PCI slot didn't detect.  I solved the problem by flashing to the latest BIOS for the board.  Now everything seems to be working fine.
    Maybe that might work for you?

  • MOVED: k8n neo fsr overclocking results

    This topic has been moved to Overclockers & Modding Corner.
    k8n neo fsr overclocking results

    well i dont know much but im pretty sure u should set memory timing to 1t

  • MOVED: k8n neo not liking corecell

    This topic has been moved to AMD64 nVidia Based board.
    k8n neo not liking corecell

    Quote from: alitayyab on 27-December-05, 20:02:01
    core-center is fickle if u ask me. i was getting all sorts of lockups etc until i uninstalled this. everything has been okay since.
    i think core-center needs a little more work, as far as stability goes. i wish msi would make something like intel's system watcher (cant remember the name) utility. it was very efficient on resources (<1%) and was very  good.
    Core Center just plain sucks... & has done so for quite some time. And under no circumstances should you use it for OC'ing & such, as it will surely corrupt your BIOS eventually.
    SpeedFan does a good job of temp reporting & it's free. It takes a little thought to figure out which sensor is for what but it's not that big of a deal & doesn't use much CPU cycles. It can provide temp graphs over time too. Just Google for the latest version.

  • MOVED: K8N Neo 2 overclock

    This topic has been moved to Overclockers & Modding Corner.
    K8N Neo 2 overclock

    Hi, this version of BIOS will recognize your CPU pretty well:
    here you can read the info: K8N Neo2 Platinum CPU Support Status
    There you can find yours as supported:
    Athlon 64 3700+ (E4 version)
    Marketing Name
    K8N Neo2 Platinum
    MSI Model
    MS-7025
    PCB Version
    1.00
    Since BIOS Version
    7025v1B.zip
    here is the link for the Bios: K8N Neo2 Platinum 1.B Bios Version
    Could you please post your PSU specs? like this e.g. 12v 22a, 3.3v 30a, 5v 50a
    kind regards

  • MOVED: K8N NEO Platinum Bios Update - Memory Downgrade

    This topic has been moved to AMD64 nVidia Based board.
    K8N NEO Platinum Bios Update - Memory Downgrade

    just switch back to bios 1.7

  • MOVED: K8n Neo 2 Platinum drivers for Vista 64

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=110820.0

    There are many 'K8N Neo4' boards, so go through this search result list, find the exact board you have, click on the Drivers tab, and then download the audio drivers you need.
    http://global.msi.eu/index.php?func=searchresult&keywords=k8n+neo4

  • MOVED: K8N Neo 2 Platinum - installing xp problem

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=73747.0

    Quote
    Could the difference  be because you have the neo and RC1 whereas I have the neo2 (1.4 BIOS) and RC2?
    Don't think so most likely difference between destination drives, yours is a sports car, fast when it's running but quircky, mine's a transit van works even when old & abused.
    Have you checked Western Digital Jumper Settings Pata & Sata even new drives have been known to have been jumpered wrongly.
    Onlly other maybe relevent thing I burned my iso at x8 to try & maximise cd quality, have seen a few pps with xp64 cds they couldn't boot from on the ms 64 newsgroup. Don't know if your cd may have been slightly screwed if thats the echnical word for it

  • MOVED: K8N Neo 4 Platinum Boot problem

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=110171.0

    Ups, I messed up. Thanks for moving this to the correct forum!
    Yes, I'm using 1st Dimm slot. I cleared CMOS with and without the power cord, with and without the battery, and every way possible. I even held the button down for 2 minutes.
    PSU is Vitsuba 450W. The 12V rail has 20A.
    I don't have a better PSU. Should I buy one?
    Already tried barebone setup. Just didn't know what it was called. Reseated CPU but didn't change anything. There are no bent pins.
    How this happened. I was working in windows and it BSOD. I reset and it didn't boot at first time, but after several tries it finally booted. That was last week. The problem repeated once again yesterday, so I decided to do a clean reinstall of Windows, just in case. So I had some troubles to boot again but it booted ok after some time. Installed windows, drivers, updates, apps, etc and everything was fine. I switched off the system yesterday at night. Today the pc won't boot anymore. So, here I am!
    Thanks for your assistance and don't hesitate to ask me some more questions!

  • MOVED: Unable to O/C FSB beyond 220 FSB (K8N Neo Platinum)

    This topic has been moved to Overclockers & Modding Corner.
    Unable to O/C FSB beyond 220 FSB (K8N Neo Platinum)

    And the Newbie award goes to:
    ME!
    Turns out that a little research over and the Amdmb forums cured my issue.
    What was wrong: The AGP lock.
    In order to get it engaged, you must set AGP frequency to 67 Mhz in the BIOS.  By default it is set to 66 Mhz.  At 66, the AGP lock is not active and you end up overclocking the AGP bus.
    Got my board to boot into windows up to 240 at 3.0-4-4-10 timings (2.80V).  However it isn't Memtest stable at that FSB.  System would post at 250 FSB, but memory couldn't keep up, and Windows wouldn't load.  Lowered FSB to 230, and got it Memtest stable at [email protected]  Also Memtest stable at 225FSB at [email protected]
    Will now work to see what the chip can do, and then try to see if I can't squeeze my memory to run at CAS 2.0.
    For all those out there with a similar issue, check your AGP frequency.  Another thing that I noted from the Amdmb forums, is that the thermal paste under the chipset heatsink is poorly applied on many boards.  This could also affect your stability, if the northbridge ends up overheating.
    So on that note, I take back my previous rant about the board.

  • MOVED: Athlon 3000 + K8N Neo Runs Fine but cannot overclock......

    This topic has been moved to Overclockers & Modding Corner.
    Athlon 3000 + K8N Neo Runs Fine but cannot overclock......

    Hi Turfman, go to the end of this mile long thread:
    https://forum-en.msi.com/index.php?topic=80211.120
    Or take this shortcut:
    http://www.madshrimps.be/?action=gethowto&number=5&howtopage=145&howtoID=58
    Let us know what you got...if this becomes more of an OC thread, it may get moved...

  • MOVED: MSI K8N Neo Platinum (MS-7030) won't post and just beeps

    This topic has been moved to AMD64 nVidia Based board.
    MSI K8N Neo Platinum (MS-7030) won't post and just beeps

    1)Main Menu - No Post/No Boot problems and fixes   - Bios-Central Award Bios Beep Codes + others
    2) Memtest86+ As Stated
    3) Power Suppy Requirements & Selection
    4) Post Specs re Powe supply 3.3v 5v & 12v Amps., Gfx cards Drives etc.,

  • MOVED: Quietest CPU Cooler for K8N Neo 2 Platinum Motherboard?

    This topic has been moved to AMD64 nVidia Based board.
    Quietest CPU Cooler for K8N Neo 2 Platinum Motherboard?

    Artic Cooling Freezer 64
    Quote
    Extremely Quiet
    The low speed 80 mm fan reduces the noise level to a minimum.
    The patented fan holder is able to practically eliminate the typical buzzing sound of 80mm fans.
    Patent No 203 07 981 U1 (Germany)
    Patent No 10/834 232 (USA)

Maybe you are looking for

  • Reflect in other tables

    Hi, We are building a new application ,for that we need few tables in the back end. here are few of them. CREATE TABLE PWA( PROJECT_NUMBER VARCHAR2(200), PROJECT_NAME VARCHAR2(200), WBS_LEVEL VARCHAR2(200), TASK_NUMBER VARCHAR2(200), TASK_NAME VARCHA

  • Cycle was detected in the build path of project

    Hi I was trying to create a Test application for MDB. Here from the webContent I call the service locator in the EJB folder and get the bean object. Using the object I need to put a message in the MQ. The onMessage method<present under EJB folder> pi

  • Mail hangs when trying to open excel file

    Hi there, I've installed goodreader, Docs to Go and numbers on my ipad. Unfortunately, mail hangs when i try to open a spreadsheet. The option to use either one of the apps pops up, however, i'm not able to select either numbers or Docs to Go to open

  • In Illustrator CC 2014 on Windows 7, placed images disappeared in 3 layers but layer panel icons show the place images so what happened?

    If the images may still be there, how do I look for them. The 3 images should show up on the 3 squares that I have highlighted in red. http://imgur.com/57P3stF

  • Road to SAP

    Hi, I am new to  SAP world and would like some guidance on SAP as a career. My qualifications are as under: Qualification :- B.E ( mechanical) and mtech automobile first year Location :- India Yrs of Exp:- fresher I would like to do SAP MM module Ple